summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-20[media] saa7134: support MagicPro ProHDTV Pro2 Hybrid DMB-TH PCI cardTimothy Lee
This card has a TD18271 silicon tuner, and uses TDA8290 and LGS8G75 to demodulate analog and digital broadcast respectively. GPIO configurations were derived using DScaler regspy. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] zoran: Drop unused module parameters encoder and decoderJean Delvare
The ability to force the encoder or decoder chip was broken by commit 0ab6e1c38d80ab586e3a1ca9e71844131d9f51dc in February 2009. As nobody complained for over 2 years, I take it that these parameters were no longer used so we can simply drop them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] lmedm04: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Tested-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] au6610: get rid of on-stack dma bufferFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Signed-off-by: Florian Mickler <florian@mickler.org> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] ce6230: get rid of on-stack dma bufferFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Signed-off-by: Florian Mickler <florian@mickler.org> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] ec168: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Signed-off-by: Florian Mickler <florian@mickler.org> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: use preallocated buffer in the frontendFlorian Mickler
Note: This change is tested to compile only as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: use preallocated buffer in vp702x_usb_inout_cmdFlorian Mickler
If we need a bigger buffer, we reallocte a new buffer and free the old one. Note: This change is tested to compile only as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: use preallocated bufferFlorian Mickler
Note: This change is tested to compile only as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: fix locking of usb operationsFlorian Mickler
Otherwise it is not obvious that vp702x_usb_in_op or vp702x_usb_out_op will not interfere with any vp702x_usb_inout_op. Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: remove unused variableFlorian Mickler
struct vp702x_device_state.power_state is nowhere referenced. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: preallocate memory on device probeFlorian Mickler
This sets up a buffer and a mutex protecting that buffer in the struct vp702x_device_state. The definition of struct vp702x_device_state is moved into the header in order to use the buffer also in the frontend. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: rename struct vp702x_state -> vp702x_adapter_stateFlorian Mickler
We need a state struct for the dvb_usb_device. In order to reduce confusion we rename the vp702x_state struct. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp702x: cleanup: whitespace and indentationFlorian Mickler
Some whitespace, one linebreak and one unneded variable initialization... Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] opera1: get rid of on-stack dma bufferFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] m920x: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] dw2102: get rid of on-stack dma bufferFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Igor M. Liplianin <liplianin@tut.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] friio: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Cc: Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] vp7045: get rid of on-stack dma buffersFlorian Mickler
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] a800: get rid of on-stack dma buffersFlorian Mickler
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] dib0700: remove unused variableFlorian Mickler
This variable is never used. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] DiB0700: get rid of on-stack dma buffersOlivier Grenie
This patch removes the on-stack buffers for USB DMA transfers. This is an alternative version of the patch discussed by Florian here: http://thread.gmane.org/gmane.linux.kernel/1115695/ Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] lmedm04: correct indentationFlorian Mickler
This should not change anything except whitespace. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] radio-si470x: convert to use request_threaded_irq()Joonyoung Shim
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] radio-si470x: convert to dev_pm_opsJoonyoung Shim
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] radio-si470x: support seek and tune interrupt enableJoonyoung Shim
Currently we use busy waiting to seek and tune, it can replace to interrupt way. SI470X I2C driver supports interrupt way to week and tune via this patch. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] tm6000: fix vbuf may be used uninitializedJarod Wilson
In commit 8aff8ba95155df, most of the manipulations to vbuf inside copy_streams were gated on if !dev->radio, but one place that touches vbuf lays outside those gates -- a memcpy of vbuf isn't NULL. If we initialize vbuf to NULL, that memcpy will never happen in the case where we do have dev->radio, and otherwise, in the !dev->radio case, the code behaves exactly like it did prior to 8aff8ba95155df. While we're at it, also fix an incorrectly indented closing brace for one of the sections touching vbuf that is conditional on !dev->radio. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] lirc_sasem: key debug spew off debug modparamJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] ttusb-budget: driver has a debug param, use itJarod Wilson
Remove DEBUG define, key debug spew off of the module's debug param that already exists. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] mceusb: Formosa e017 device has no txJarod Wilson
Per hardware provided to me, the Formosa Industrial Computing eHome Infrared Receiver, 0x147a:0xe017, has no tx capability, it is rx only. Thanks go to Paul Rae for the hardware. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc/nuvoton-cir: enable CIR on w83667hg chip variantJarod Wilson
Thanks to some excellent investigative work by Douglas Clowes, it was uncovered that the older w83667hg Nuvoton chip functions with this driver after actually enabling the CIR function via its multi-function chip config register. The CIR and CIR wide-band sensor enable bits are just in a different place on this hardware, so we only poke register 0x27 on 677 hardware now, and we poke register 0x2c on the 667 now. Reported-by: Douglas Clowes <dclowes1@optusnet.com.au> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc/nuvoton-cir: only warn about unknown chipsJarod Wilson
There are additional chip IDs that report a PNP ID of NTN0530, which we were refusing to load on. Instead, lets just warn if we encounter an unknown chip, as there's a chance it will work just fine. Also, expand the list of known hardware to include both an earlier and a later generation chip that this driver should function with. Douglas has an older w83667hg variant, that with a touch more work, will be supported by this driver, and Lutz has a newer w83677hg variant that works without any further modifications to the driver. Reported-by: Douglas Clowes <dclowes1@optusnet.com.au> Reported-by: Lutz Sammer <johns98@gmx.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc: further key name standardizationJarod Wilson
Use the newly introduced KEY_IMAGES where appropriate, and standardize on KEY_MEDIA for media center/application launcher button (such as the Windows logo key on the Windows Media Center Ed. remotes). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] mceusb: tivo transceiver should default to tivo keymapJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc: add tivo/nero liquidtv keymapJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - kinect: New subdriver for Microsoft KinectAntonio Ospite
The Kinect sensor is a device used by Microsoft for its Kinect project, which is a system for controller-less Human-Computer interaction targeted for Xbox 360. In the Kinect device, RGBD data is captured from two distinct sensors: a regular RGB sensor and a monochrome sensor which, with the aid of a IR structured light, captures what is finally exposed as a depth map; so what we have is basically a Structured-light 3D scanner. The Kinect gspca subdriver just supports the video stream for now, exposing the output from the RGB sensor or the unprocessed output from the monochrome sensor; it does not deal with the processed depth stream yet, but it allows using the sensor as a Webcam or as an IR camera (an external source of IR light might be needed for this use). The low level implementation is based on code from the OpenKinect project (http://openkinect.org). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - zc3xx: Adjust the mc501cb exchangesJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: add SPORTSCAM specific controlsPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: Add SPORTSCAM_DV15 camera supportPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: add 640*480 resolution supportPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: use gspca_dev->usb_err to forward error to upper layerPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: suppress workqueuePatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] tveeprom: update hauppauge tuner list thru 174Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] tveeprom: update hauppauge tuner list thru 169Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add more info about known board configsAntti Palosaari
Add some comments about known GPIO settings of supported board versions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for two byte I2C addressAntti Palosaari
After that Anysee I2C adapter is capable of one and two byte long I2C addresses in case of read from I2C bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: enhance demod and tuner attachAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 DVB-TAntti Palosaari
Use correct I2C address for ZL10353 DVB-T demod. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 GPIOAntti Palosaari
Looks like it is IF route switch on IOE[0]. Set it correctly to route signal from tuner to demod. Now it works for DVB-C too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-10-05 13:08:06 (GMT)