summaryrefslogtreecommitdiff
path: root/fs/btrfs/ordered-data.h
AgeCommit message (Collapse)Author
2010-12-22btrfs: Allow to add new compression algorithmLi Zefan
Make the code aware of compression type, instead of always assuming zlib compression. Also make the zlib workspace function as common code for all compression types. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-11-29Btrfs: deal with DIO bios that span more than one ordered extentChris Mason
The new DIO bio splitting code has problems when the bio spans more than one ordered extent. This will happen as the generic DIO code merges our get_blocks calls together into a bigger single bio. This fixes things by walking forward in the ordered extent code finding all the overlapping ordered extents and completing them all at once. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25Btrfs: add basic DIO read/write supportJosef Bacik
This provides basic DIO support for reading and writing. It does not do the work to recover from mismatching checksums, that will come later. A few design changes have been made from Jim's code (sorry Jim!) 1) Use the generic direct-io code. Jim originally re-wrote all the generic DIO code in order to account for all of BTRFS's oddities, but thanks to that work it seems like the best bet is to just ignore compression and such and just opt to fallback on buffered IO. 2) Fallback on buffered IO for compressed or inline extents. Jim's code did it's own buffering to make dio with compressed extents work. Now we just fallback onto normal buffered IO. 3) Use ordered extents for the writes so that all of the lock_extent() lookup_ordered() type checks continue to work. 4) Do the lock_extent() lookup_ordered() loop in readpage so we don't race with DIO writes. I've tested this with fsx and everything works great. This patch depends on my dio and filemap.c patches to work. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-15Btrfs: cache ordered extent when completing ioJosef Bacik
When finishing io we run btrfs_dec_test_ordered_pending, and then immediately run btrfs_lookup_ordered_extent, but btrfs_dec_test_ordered_pending does that already, so we're searching twice when we don't have to. This patch lets us pass a btrfs_ordered_extent in to btrfs_dec_test_ordered_pending so if we do complete io on that ordered extent we can just use the one we found then instead of having to do another btrfs_lookup_ordered_extent. This made my fio job with the other patch go from 24 mb/s to 29 mb/s. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-15Btrfs: change the ordered tree to use a spinlock instead of a mutexJosef Bacik
The ordered tree used to need a mutex, but currently all we use it for is to protect the rb_tree, and a spin_lock is just fine for that. Using a spin_lock instead makes dbench run a little faster, 58 mb/s instead of 51 mb/s, and have less latency, 3445.138 ms instead of 3820.633 ms. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-08Btrfs: use RB_ROOT to intialize rb_trees instead of setting rb_node to NULLEric Paris
btrfs inialize rb trees in quite a number of places by settin rb_node = NULL; The problem with this is that 17d9ddc72fb8bba0d4f678 in the linux-next tree adds a new field to that struct which needs to be NULL for the new rbtree library code to work properly. This patch uses RB_ROOT as the intializer so all of the relevant fields will be NULL'd. Without the patch I get a panic. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Add delayed iputYan, Zheng
iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Fix disk_i_size update corner caseYan, Zheng
There are some cases file extents are inserted without involving ordered struct. In these cases, we update disk_i_size directly, without checking pending ordered extent and DELALLOC bit. This patch extends btrfs_ordered_update_i_size() to handle these cases. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-01Btrfs: remove duplicates of filemap_ helpersChristoph Hellwig
Use filemap_fdatawrite_range and filemap_fdatawait_range instead of local copies of the functions. For filemap_fdatawait_range that also means replacing the awkward old wait_on_page_writeback_range calling convention with the regular filemap byte offsets. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11Btrfs: Use PagePrivate2 to track pages in the data=ordered code.Chris Mason
Btrfs writes go through delalloc to the data=ordered code. This makes sure that all of the data is on disk before the metadata that references it. The tracking means that we have to make sure each page in an extent is fully written before we add that extent into the on-disk btree. This was done in the past by setting the EXTENT_ORDERED bit for the range of an extent when it was added to the data=ordered code, and then clearing the EXTENT_ORDERED bit in the extent state tree as each page finished IO. One of the reasons we had to do this was because sometimes pages are magically dirtied without page_mkwrite being called. The EXTENT_ORDERED bit is checked at writepage time, and if it isn't there, our page become dirty without going through the proper path. These bit operations make for a number of rbtree searches for each page, and can cause considerable lock contention. This commit switches from the EXTENT_ORDERED bit to use PagePrivate2. As pages go into the ordered code, PagePrivate2 is set on each one. This is a cheap operation because we already have all the pages locked and ready to go. As IO finishes, the PagePrivate2 bit is cleared and the ordered accoutning is updated for each page. At writepage time, if the PagePrivate2 bit is missing, we go into the writepage fixup code to handle improperly dirtied pages. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-31Btrfs: add extra flushing for renames and truncatesChris Mason
Renames and truncates are both common ways to replace old data with new data. The filesystem can make an effort to make sure the new data is on disk before actually replacing the old data. This is especially important for rename, which many application use as though it were atomic for both the data and the metadata involved. The current btrfs code will happily replace a file that is fully on disk with one that was just created and still has pending IO. If we crash after transaction commit but before the IO is done, we'll end up replacing a good file with a zero length file. The solution used here is to create a list of inodes that need special ordering and force them to disk before the commit is done. This is similar to the ext3 style data=ordering, except it is only done on selected files. Btrfs is able to get away with this because it does not wait on commits very often, even for fsync (which use a sub-commit). For renames, we order the file when it wasn't already on disk and when it is replacing an existing file. Larger files are sent to filemap_flush right away (before the transaction handle is opened). For truncates, we order if the file goes from non-zero size down to zero size. This is a little different, because at the time of the truncate the file has no dirty bytes to order. But, we flag the inode so that it is added to the ordered list on close (via release method). We also immediately add it to the ordered list of the current transaction so that we can try to flush down any writes the application sneaks in before commit. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08Btrfs: move data checksumming into a dedicated treeChris Mason
Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-30Btrfs: Add fallocate support v2Yan Zheng
This patch updates btrfs-progs for fallocate support. fallocate is a little different in Btrfs because we need to tell the COW system that a given preallocated extent doesn't need to be cow'd as long as there are no snapshots of it. This leverages the -o nodatacow checks. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-30Btrfs: update nodatacow code v2Yan Zheng
This patch simplifies the nodatacow checker. If all references were created after the latest snapshot, then we can avoid COW safely. This patch also updates run_delalloc_nocow to do more fine-grained checking. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-29Btrfs: Add zlib compression supportChris Mason
This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-03Btrfs: O_DIRECT writes via buffered writes + invaldiateChris Mason
This reworks the btrfs O_DIRECT write code a bit. It had always fallen back to buffered IO and done an invalidate, but needed to be updated for the data=ordered code. The invalidate wasn't actually removing pages because they were still inside an ordered extent. This also combines the O_DIRECT/O_SYNC paths where possible, and kicks off IO in the main btrfs_file_write loop to keep the pipe down the the disk full as we process long writes. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix nodatacow for the new data=ordered modeYan Zheng
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix the defragmention code and the block relocation code for data=orderedChris Mason
Before setting an extent to delalloc, the code needs to wait for pending ordered extents. Also, the relocation code needs to wait for ordered IO before scanning the block group again. This is because the extents are not removed until the IO for the new extents is finished Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix 32 bit compiles by using an unsigned long byte count in the ↵Chris Mason
ordered extent The ordered extents have to fit in memory, so an unsigned long is sufficient. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Take the csum mutex while reading checksumsChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix some data=ordered related data corruptionsChris Mason
Stress testing was showing data checksum errors, most of which were caused by a lookup bug in the extent_map tree. The tree was caching the last pointer returned, and searches would check the last pointer first. But, search callers also expect the search to return the very first matching extent in the range, which wasn't always true with the last pointer usage. For now, the code to cache the last return value is just removed. It is easy to fix, but I think lookups are rare enough that it isn't required anymore. This commit also replaces do_sync_mapping_range with a local copy of the related functions. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Handle data checksumming on bios that span multiple ordered extentsChris Mason
Data checksumming is done right before the bio is sent down the IO stack, which means a single bio might span more than one ordered extent. In this case, the checksumming data is split between two ordered extents. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Cleanup and comment ordered-data.cChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Don't pin pages in ram until the entire ordered extent is on disk.Chris Mason
Checksum items are not inserted until the entire ordered extent is on disk, but individual pages might be clean and available for reclaim long before the whole extent is on disk. In order to allow those pages to be freed, we need to be able to search the list of ordered extents to find the checksum that is going to be inserted in the tree. This way if the page needs to be read back in before the checksums are in the btree, we'll be able to verify the checksum on the page. This commit adds the ability to search the pending ordered extents for a given offset in the file, and changes btrfs_releasepage to allow ordered pages to be freed. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Update on disk i_size only after pending ordered extents are doneChris Mason
This changes the ordered data code to update i_size after the extent is on disk. An on disk i_size is maintained in the in-memory btrfs inode structures, and this is updated as extents finish. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: New data=ordered implementationChris Mason
The old data=ordered code would force commit to wait until all the data extents from the transaction were fully on disk. This introduced large latencies into the commit and stalled new writers in the transaction for a long time. The new code changes the way data allocations and extents work: * When delayed allocation is filled, data extents are reserved, and the extent bit EXTENT_ORDERED is set on the entire range of the extent. A struct btrfs_ordered_extent is allocated an inserted into a per-inode rbtree to track the pending extents. * As each page is written EXTENT_ORDERED is cleared on the bytes corresponding to that page. * When all of the bytes corresponding to a single struct btrfs_ordered_extent are written, The previously reserved extent is inserted into the FS btree and into the extent allocation trees. The checksums for the file data are also updated. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Fix btrfs_del_ordered_inode to allow forcing the drop during unlinksChris Mason
This allows us to delete an unlinked inode with dirty pages from the list instead of forcing commit to write these out before deleting the inode. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25btrfs delete ordered inode handling fixMingming
Use btrfs_release_file instead of a put_inode call Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Throttle file_write when data=ordered is flushing the inodeChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix data=ordered vs wait_on_inode deadlock on older kernelsChris Mason
Using ilookup5 during data=ordered writeback could deadlock on I_LOCK. This saves a pointer to the inode instead. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Rework btrfs_drop_inode to avoid schedulingChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add data=ordered supportChris Mason
This forces file data extents down the disk along with the metadata that references them. The current implementation is fairly simple, and just writes out all of the dirty pages in an inode before the commit. Signed-off-by: Chris Mason <chris.mason@oracle.com>