summaryrefslogtreecommitdiff
path: root/fs/btrfs/volumes.h
AgeCommit message (Collapse)Author
2012-12-17Btrfs: put raid properties into global tableLiu Bo
Raid properties can be shared among raid calculation code, we can put them into a global table to keep it simple. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: change core code of btrfs to support the device replace operationsStefan Behrens
This commit contains all the essential changes to the core code of Btrfs for support of the device replace procedure. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: add new sources for device replace codeStefan Behrens
This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: disallow some operations on the device replace target deviceStefan Behrens
This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: pass fs_info instead of rootStefan Behrens
A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: add btrfs_scratch_superblock() functionStefan Behrens
This new function is used by the device replace procedure in a later patch. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: pass fs_info to btrfs_map_block() instead of mapping_treeStefan Behrens
This is required for the device replace procedure in a later step. Two calling functions also had to be changed to have the fs_info pointer: repair_io_failure() and scrub_setup_recheck_block(). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: Pass fs_info to btrfs_num_copies() instead of mapping_treeStefan Behrens
This is required for the device replace procedure in a later step. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: add two more find_device() methodsStefan Behrens
The new function btrfs_find_device_missing_or_by_path() will be used for the device replace procedure. This function itself calls the second new function btrfs_find_device_by_path(). Unfortunately, it is not possible to currently make the rest of the code use these functions as well, since all functions that look similar at first view are all a little bit different in what they are doing. But in the future, new code could benefit from these two new functions, and currently, device replace uses them. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-12-12Btrfs: rename the scrub context structureStefan Behrens
The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-08-28Btrfs: revert checksum error statistic which can cause a BUG()Stefan Behrens
Commit 442a4f6308e694e0fa6025708bd5e4e424bbf51c added btrfs device statistic counters for detected IO and checksum errors to Linux 3.5. The statistic part that counts checksum errors in end_bio_extent_readpage() can cause a BUG() in a subfunction: "kernel BUG at fs/btrfs/volumes.c:3762!" That part is reverted with the current patch. However, the counting of checksum errors in the scrub context remains active, and the counting of detected IO errors (read, write or flush errors) in all contexts remains active. Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-07-23Btrfs: add DEVICE_READY ioctlJosef Bacik
This will be used in conjunction with btrfs device ready <dev>. This is needed for initrd's to have a nice and lightweight way to tell if all of the devices needed for a file system are in the cache currently. This keeps them from having to do mount+sleep loops waiting for devices to show up. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-07-23btrfs: join DEV_STATS ioctls to oneDavid Sterba
Commit c11d2c236cc260b36 (Btrfs: add ioctl to get and reset the device stats) introduced two ioctls doing almost the same thing distinguished by just the ioctl number which encodes "do reset after read". I have suggested http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg16604.html to implement it via the ioctl args. This hasn't happen, and I think we should use a more clean way to pass flags and should not waste ioctl numbers. CC: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: David Sterba <dsterba@suse.cz>
2012-07-02Btrfs: resume balance on rw (re)mounts properlyIlya Dryomov
This introduces btrfs_resume_balance_async(), which, given that restriper state was recovered earlier by btrfs_recover_balance(), resumes balance in btrfs-balance kthread. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-07-02Btrfs: restore restriper state on all mountsIlya Dryomov
Fix a bug that triggered asserts in btrfs_balance() in both normal and resume modes -- restriper state was not properly restored on read-only mounts. This factors out resuming code from btrfs_restore_balance(), which is now also called earlier in the mount sequence to avoid the problem of some early writes getting the old profile. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-06-15Btrfs: use rcu to protect device->nameJosef Bacik
Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-05-30Btrfs: read device stats on mount, write modified ones during commitStefan Behrens
The device statistics are written into the device tree with each transaction commit. Only modified statistics are written. When a filesystem is mounted, the device statistics for each involved device are read from the device tree and used to initialize the counters. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-30Btrfs: add ioctl to get and reset the device statsStefan Behrens
An ioctl interface is added to get the device statistic counters. A second ioctl is added to atomically get and reset these counters. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-30Btrfs: add device counters for detected IO and checksum errorsStefan Behrens
The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-03-22btrfs: return void in functions without error conditionsJeff Mahoney
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-01-16Merge branch 'for-chris' of git://repo.or.cz/linux-btrfs-devel into integrationChris Mason
Conflicts: fs/btrfs/volumes.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Btrfs: add balance progress reportingIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: allow for canceling restriperIlya Dryomov
Implement an ioctl for canceling restriper. Currently we wait until relocation of the current block group is finished, in future this can be done by triggering a commit. Balance item is deleted and no memory about the interrupted balance is kept. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: allow for pausing restriperIlya Dryomov
Implement an ioctl for pausing restriper. This pauses the relocation, but balance is still considered to be "in progress": balance item is not deleted, other volume operations cannot be started, etc. If paused in the middle of profile changing operation we will continue making allocations with the target profile. Add a hook to close_ctree() to pause restriper and free its data structures on unmount. (It's safe to unmount when restriper is in "paused" state, we will resume with the same parameters on the next mount) Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: recover balance on mountIlya Dryomov
On mount, if balance item is found, resume balance in a separate kernel thread. Try to be smart to continue roughly where previous balance (or convert) was interrupted. For chunk types that were being converted to some profile we turn on soft convert, in case of a simple balance we turn on usage filter and relocate only less-than-90%-full chunks of that type. These are just heuristics but they help quite a bit, and can be improved in future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: soft profile changing mode (aka soft convert)Ilya Dryomov
When doing convert from one profile to another if soft mode is on restriper won't touch chunks that already have the profile we are converting to. This is useful if e.g. half of the FS was converted earlier. The soft mode switch is (like every other filter) per-type. This means that we can convert for example meta chunks the "hard" way while converting data chunks selectively with soft switch. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: implement online profile changingIlya Dryomov
Profile changing is done by launching a balance with BTRFS_BALANCE_CONVERT bits set and target fields of respective btrfs_balance_args structs initialized. Profile reducing code in this case will pick restriper's target profile if it's available instead of doing a blind reduce. If target profile is not yet available it goes back to a plain reduce. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: virtual address space subset filterIlya Dryomov
Select chunks which have at least one byte located inside a given [vstart, vend) virtual address space range. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: devid subset filterIlya Dryomov
Select chunks which have at least one byte of at least one stripe located on a device with devid X in a given [pstart,pend) physical address range. This filter only works when devid filter is turned on. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: devid filterIlya Dryomov
Relocate chunks which have at least one stripe located on a device with devid X. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: usage filterIlya Dryomov
Select chunks that are less than X percent full. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: profiles filterIlya Dryomov
Select chunks based on a given profile mask. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add basic infrastructure for selective balancingIlya Dryomov
This allows to have a separate set of filters for each chunk type (data,meta,sys). The code however is generic and switch on chunk type is only done once. This commit also adds a type filter: it allows to balance for example meta and system chunks w/o touching data ones. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add basic restriper infrastructureIlya Dryomov
Add basic restriper infrastructure: extended balancing ioctl and all related ioctl data structures, add data structure for tracking restriper's state to fs_info, etc. The semantics of the old balancing ioctl are fully preserved. Explicitly disallow any volume operations when balance is in progress. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-11Btrfs: don't pass a trans handle unnecessarily in volumes.cLi Zefan
Some functions never use the transaction handle passed to them. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-11-20Btrfs: fix barrier flushesChris Mason
When btrfs is writing the super blocks, it send barrier flushes to make sure writeback caching drives get all the metadata on disk in the right order. But, we have two bugs in the way these are sent down. When doing full commits (not via the tree log), we are sending the barrier down before the last super when it should be going down before the first. In multi-device setups, we should be waiting for the barriers to complete on all devices before writing any of the supers. Both of these bugs can cause corruptions on power failures. We fix it with some new code to send down empty barriers to all devices before writing the first super. Alexandre Oliva found the multi-device bug. Arne Jansen did the async barrier loop. Signed-off-by: Chris Mason <chris.mason@oracle.com> Reported-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
2011-11-06Merge git://git.jan-o-sch.net/btrfs-unstable into integrationChris Mason
Conflicts: fs/btrfs/Makefile fs/btrfs/extent_io.c fs/btrfs/extent_io.h fs/btrfs/scrub.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-10-02btrfs: state information for readaheadArne Jansen
Add state information for readahead to btrfs_fs_info and btrfs_device Changes v2: - don't wait in radix_trees - add own set of workers for readahead Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-09-29btrfs: btrfs_multi_bio replaced with btrfs_bioJan Schmidt
btrfs_bio is a bio abstraction able to split and not complete after the last bio has returned (like the old btrfs_multi_bio). Additionally, btrfs_bio tracks the mirror_num used to read data which can be used for error correction purposes. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-17Btrfs: detect wether a device supports discardJosef Bacik
We have a problem where if a user specifies discard but doesn't actually support it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem because this gets called (in a fashion) from the tree log recovery code, which has a nice little BUG_ON(ret) after it, which causes us to fail the tree log replay. So instead detect wether our devices support discard when we're adding them and then don't issue discards if we know that the device doesn't support it. And just for good measure set ret = 0 in btrfs_issue_discard just in case we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23Merge branch 'cleanups_and_fixes' into inode_numbersChris Mason
Conflicts: fs/btrfs/tree-log.c fs/btrfs/volumes.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23Btrfs: using rcu lock in the reader side of devices listXiao Guangrong
fs_devices->devices is only updated on remove and add device paths, so we can use rcu to protect it in the reader side Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers Conflicts: fs/btrfs/Makefile fs/btrfs/ctree.h fs/btrfs/volumes.h Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-22Merge branch 'allocator' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-13btrfs: quasi-round-robin for chunk allocationArne Jansen
In a multi device setup, the chunk allocator currently always allocates chunks on the devices in the same order. This leads to a very uneven distribution, especially with RAID1 or RAID10 and an uneven number of devices. This patch always sorts the devices before allocating, and allocates the stripes on the devices with the most available space, as long as there is enough space available. In a low space situation, it first tries to maximize striping. The patch also simplifies the allocator and reduces the checks for corner cases. The simplification is done by several means. First, it defines the properties of each RAID type upfront. These properties are used afterwards instead of differentiating cases in several places. Second, the old allocator defined a minimum stripe size for each block group type, tried to find a large enough chunk, and if this fails just allocates a smaller one. This is now done in one step. The largest possible chunk (up to max_chunk_size) is searched and allocated. Because we now have only one pass, the allocation of the map (struct map_lookup) is moved down to the point where the number of stripes is already known. This way we avoid reallocation of the map. We still avoid allocating stripes that are not a multiple of STRIPE_SIZE.
2011-05-13btrfs: move btrfs_cmp_device_free_bytes to super.cArne Jansen
this function won't be used here anymore, so move it super.c where it is used for df-calculation
2011-05-12btrfs: scrubArne Jansen
This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-06btrfs: remove all unused functionsDavid Sterba
Remove static and global declarations and/or definitions. Reduces size of btrfs.ko by ~3.4kB. text data bss dec hex filename 402081 7464 200 409745 64091 btrfs.ko.base 398620 7144 200 405964 631cc btrfs.ko.remove-all Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-04btrfs: remove unused function prototypesDavid Sterba
function prototypes without a body Signed-off-by: David Sterba <dsterba@suse.cz>
2011-03-28Btrfs: make btrfs_map_block() return entire free extent for each device of ↵Li Dongyang
RAID0/1/10/DUP btrfs_map_block() will only return a single stripe length, but we want the full extent be mapped to each disk when we are trimming the extent, so we add length to btrfs_bio_stripe and fill it if we are mapping for REQ_DISCARD. Signed-off-by: Li Dongyang <lidongyang@novell.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>