| Age | Commit message (Collapse) | Author |
|---|
|
The in_recovery rw_semaphore has always been acquired and
released by different threads by design. To work around
the "BUG: bad unlock balance detected!" messages, adjust
things so the dlm_recoverd thread always does both down_write
and up_write.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
When a large number of resources are being recovered,
a linear search of the recover_list takes a long time.
Use an idr in place of a list.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Remove the dir hash table (dirtbl), and use
the rsb hash table (rsbtbl) as the resource
directory. It has always been an unnecessary
duplication of information.
This improves efficiency by using a single rsbtbl
lookup in many cases where both rsbtbl and dirtbl
lookups were needed previously.
This eliminates the need to handle cases of rsbtbl
and dirtbl being out of sync.
In many cases there will be memory savings because
the dir hash table no longer exists.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used. This commit
fixes a number of problems, making nodir much more usable.
- Major change to recovery: recover all locks and restart
all in-progress operations after recovery. In some
cases it's not possible to know which in-progess locks
to recover, so recover all. (Most require recovery
in nodir mode anyway since rehashing changes most
master nodes.)
- Change the way nodir mode is enabled, from a command
line mount arg passed through gfs2, into a sysfs
file managed by dlm_controld, consistent with the
other config settings.
- Allow recovering MSTCPY locks on an rsb that has not
yet been turned into a master copy.
- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
from a previous, aborted recovery cycle. Base this
on the local recovery status not being in the state
where any nodes should be sending LOCK messages for the
current recovery cycle.
- Hold rsb lock around dlm_purge_mstcpy_locks() because it
may run concurrently with dlm_recover_master_copy().
- Maintain highbast on process-copy lkb's (in addition to
the master as is usual), because the lkb can switch
back and forth between being a master and being a
process copy as the master node changes in recovery.
- When recovering MSTCPY locks, flag rsb's that have
non-empty convert or waiting queues for granting
at the end of recovery. (Rename flag from LOCKS_PURGED
to RECOVER_GRANT and similar for the recovery function,
because it's not only resources with purged locks
that need grant a grant attempt.)
- Replace a couple of unnecessary assertion panics with
error messages.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Unify the checking for both types of ignored
rcom messages, and replace the two log_debug
statements with a single, rate limited debug
message.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Slot numbers are assigned to nodes when they join the lockspace.
The slot number chosen is the minimum unused value starting at 1.
Once a node is assigned a slot, that slot number will not change
while the node remains a lockspace member. If the node leaves
and rejoins it can be assigned a new slot number.
A new generation number is also added to a lockspace. It is
set and incremented during each recovery along with the slot
collection/assignment.
The slot numbers will be passed to gfs2 which will use them as
journal id's.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Change how callbacks are recorded for locks. Previously, information
about multiple callbacks was combined into a couple of variables that
indicated what the end result should be. In some situations, we
could not tell from this combined state what the exact sequence of
callbacks were, and would end up either delivering the callbacks in
the wrong order, or suppress redundant callbacks incorrectly. This
new approach records all the data for each callback, leaving no
uncertainty about what needs to be delivered.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Replace all GFP_KERNEL and ls_allocation with GFP_NOFS.
ls_allocation would be GFP_KERNEL for userland lockspaces
and GFP_NOFS for file system lockspaces.
It was discovered that any lockspaces on the system can
affect all others by triggering memory reclaim in the
file system which could in turn call back into the dlm
to acquire locks, deadlocking dlm threads that were
shared by all lockspaces, like dlm_recv.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The recent patch to validate data lengths in rcom_names messages
failed to account for fake messages a node directs to itself before
ever sending it. In this case we need to fill in the message length
in the header for the validation code to use.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Use proper types for ast and bast functions, and use
consistent type for ast param.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
A couple small clean-ups. Remove unnecessary wrapper-functions in
rcom.c, and remove unnecessary casting and an unnecessary ASSERT in
util.c.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm. This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.
The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle. While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up. dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero. This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.
The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv. The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa. Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace.
This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL.
(This updated version of the patch uses gfp_t for ls_allocation.)
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Joining the lockspace should wait for the initial round of inter-node
config checks to complete before returning. This way, if there's a
configuration mismatch between the joining node and the existing nodes,
the join can fail and return an error to the application.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch). No functional changes in this patch, just naming changes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Some common, non-error messages should use log_debug instead of log_error
so they can be turned off.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Check if we receive a message from another lockspace member running a
version of the dlm with an incompatible inter-node message protocol.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
A reply to a recovery message will often be received after the relevant
recovery sequence has aborted and the next recovery sequence has begun.
We need to ignore replies to these old messages from the previous
recovery. There's already a way to do this for synchronous recovery
requests using the rc_id number, but not for async.
Each recovery sequence already has a locally unique sequence number
associated with it. This patch adds a field to the rcom (recovery
message) structure where this recovery sequence number can be placed,
rc_seq. When a node sends a reply to a recovery request, it copies the
rc_seq number it received into rc_seq_reply. When the first node receives
the reply to its recovery message, it will check whether rc_seq_reply
matches the current recovery sequence number, ls_recover_seq, and if not
then it ignores the old reply.
An old, inadequate approach to filtering out old replies (checking if the
current stage of recovery has moved back to the start) has been removed
from two spots.
The protocol version number is changed to reflect the different rcom
structures.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This fixes the following gcc warnings generated on
the architectures where uint64_t != unsigned long long (e.g. ppc64).
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t'
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t'
fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We often abort a recovery after sending a status request to a remote node.
We want to ignore any potential status reply we get from the remote node.
If we get one of these unwanted replies, we've often moved on to the next
recovery message and incremented the message sequence counter, so the
reply will be ignored due to the seq number. In some cases, we've not
moved on to the next message so the seq number of the reply we want to
ignore is still correct, causing the reply to be accepted. The next
recovery message will then mistake this old reply as a new one.
To fix this, we add the flag RCOM_WAIT to indicate when we can accept a
new reply. We clear this flag if we abort recovery while waiting for a
reply. Before the flag is set again (to allow new replies) we know that
any old replies will be rejected due to their sequence number. We also
initialize the recovery-message sequence number to a random value when a
lockspace is first created. This makes it clear when messages are being
rejected from an old instance of a lockspace that has since been
recreated.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When the not_ready routine sends a "fake" status reply with blank status
flags, it needs to use the correct size for a normal STATUS_REPLY by
including the size of the would-be config parameters. We also fill in the
non-existant config parameters with an invalid lvblen value so it's easier
to notice if these invalid paratmers are ever being used.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Red Hat BZ 213682
If two nodes leave the lockspace (while unmounting the fs in the case of
gfs) after one has sent a STATUS message to the other, STATUS/STATUS_REPLY
messages will then ping-pong between the nodes when neither of them can
find the lockspace in question any longer. We kill this by not sending
another STATUS message when we get a STATUS_REPLY for an unknown
lockspace.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When a status reply is sent for a lockspace that doesn't yet exist, the
message sequence number from the sender was not being copied into the
reply causing the sender to ignore the reply.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When recoveries are aborted by other recoveries we can get replies to
status or names requests that we've given up on. This can cause problems
if we're making another request and receive an old reply. Add a sequence
number to status/names requests and reject replies that don't match. A
field already exists for the seq number that's used in other message
types.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
To aid debugging, it's useful to be able to see what nodeid the dlm is
waiting on for a message reply.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch removes support for range locking from the DLM
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.
It implements VAX-style locking modes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
|
