summaryrefslogtreecommitdiff
path: root/fs/ext3
AgeCommit message (Collapse)Author
2012-07-09ext3: Check return value of blkdev_issue_flush()Jan Kara
blkdev_issue_flush() can fail. Make sure the error gets properly propagated. Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-09ext3: force ro mount if ext3_setup_super() failsEric Sandeen
If ext3_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: [164152.114551] EXT3-fs (sdb6): error: revision level too high, forcing read-only mode /dev/sdb6 /mnt/test2 ext3 rw,seclabel,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0 ^^ Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-28Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds
Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally
2012-05-25Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, ext3 and quota fixes from Jan Kara: "Interesting bits are: - removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since quota code does not need i_mutex anymore in any unusual way. - backport (from ext4) of a fix of a checkpointing bug (missing cache flush) that could lead to fs corruption on power failure The rest are just random small fixes & cleanups." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: trivial fix to comment for ext2_free_blocks ext2: remove the redundant comment for ext2_export_ops ext3: return 32/64-bit dir name hash according to usage type quota: Get rid of nested I_MUTEX_QUOTA locking subclass quota: Use precomputed value of sb_dqopt in dquot_quota_sync ext2: Remove i_mutex use from ext2_quota_write() reiserfs: Remove i_mutex use from reiserfs_quota_write() ext4: Remove i_mutex use from ext4_quota_write() ext3: Remove i_mutex use from ext3_quota_write() quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG jbd: Write journal superblock with WRITE_FUA after checkpointing jbd: protect all log tail updates with j_checkpoint_mutex jbd: Split updating of journal superblock and marking journal empty ext2: do not register write_super within VFS ext2: Remove s_dirt handling ext2: write superblock only once on unmount ext3: update documentation with barrier=1 default ext3: remove max_debt in find_group_orlov() jbd: Refine commit writeout logic
2012-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace enhancements from Eric Biederman: "This is a course correction for the user namespace, so that we can reach an inexpensive, maintainable, and reasonably complete implementation. Highlights: - Config guards make it impossible to enable the user namespace and code that has not been converted to be user namespace safe. - Use of the new kuid_t type ensures the if you somehow get past the config guards the kernel will encounter type errors if you enable user namespaces and attempt to compile in code whose permission checks have not been updated to be user namespace safe. - All uids from child user namespaces are mapped into the initial user namespace before they are processed. Removing the need to add an additional check to see if the user namespace of the compared uids remains the same. - With the user namespaces compiled out the performance is as good or better than it is today. - For most operations absolutely nothing changes performance or operationally with the user namespace enabled. - The worst case performance I could come up with was timing 1 billion cache cold stat operations with the user namespace code enabled. This went from 156s to 164s on my laptop (or 156ns to 164ns per stat operation). - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value. Most uid/gid setting system calls treat these value specially anyway so attempting to use -1 as a uid would likely cause entertaining failures in userspace. - If setuid is called with a uid that can not be mapped setuid fails. I have looked at sendmail, login, ssh and every other program I could think of that would call setuid and they all check for and handle the case where setuid fails. - If stat or a similar system call is called from a context in which we can not map a uid we lie and return overflowuid. The LFS experience suggests not lying and returning an error code might be better, but the historical precedent with uids is different and I can not think of anything that would break by lying about a uid we can't map. - Capabilities are localized to the current user namespace making it safe to give the initial user in a user namespace all capabilities. My git tree covers all of the modifications needed to convert the core kernel and enough changes to make a system bootable to runlevel 1." Fix up trivial conflicts due to nearby independent changes in fs/stat.c * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) userns: Silence silly gcc warning. cred: use correct cred accessor with regards to rcu read lock userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq userns: Convert cgroup permission checks to use uid_eq userns: Convert tmpfs to use kuid and kgid where appropriate userns: Convert sysfs to use kgid/kuid where appropriate userns: Convert sysctl permission checks to use kuid and kgids. userns: Convert proc to use kuid/kgid where appropriate userns: Convert ext4 to user kuid/kgid where appropriate userns: Convert ext3 to use kuid/kgid where appropriate userns: Convert ext2 to use kuid/kgid where appropriate. userns: Convert devpts to use kuid/kgid where appropriate userns: Convert binary formats to use kuid/kgid where appropriate userns: Add negative depends on entries to avoid building code that is userns unsafe userns: signal remove unnecessary map_cred_ns userns: Teach inode_capable to understand inodes whose uids map to other namespaces. userns: Fail exec for suid and sgid binaries with ids outside our user namespace. userns: Convert stat to return values mapped from kuids and kgids userns: Convert user specfied uids and gids in chown into kuids and kgid userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs ...
2012-05-15userns: Convert ext3 to use kuid/kgid where appropriateEric W. Biederman
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-15ext3: return 32/64-bit dir name hash according to usage typeEric Sandeen
This is based on commit d1f5273e9adb40724a85272f248f210dc4ce919a ext4: return 32/64-bit dir name hash according to usage type by Fan Yong <yong.fan@whamcloud.com> Traditionally ext2/3/4 has returned a 32-bit hash value from llseek() to appease NFSv2, which can only handle a 32-bit cookie for seekdir() and telldir(). However, this causes problems if there are 32-bit hash collisions, since the NFSv2 server can get stuck resending the same entries from the directory repeatedly. Allow ext3 to return a full 64-bit hash (both major and minor) for telldir to decrease the chance of hash collisions. This patch does implement a new ext3_dir_llseek op, because with 64-bit hashes, nfs will attempt to seek to a hash "offset" which is much larger than ext3's s_maxbytes. So for dx dirs, we call generic_file_llseek_size() with the appropriate max hash value as the maximum seekable size. Otherwise we just pass through to generic_file_llseek(). Patch-updated-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Patch-updated-by: Eric Sandeen <sandeen@redhat.com> (blame us if something is not correct) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-15ext3: Remove i_mutex use from ext3_quota_write()Jan Kara
We don't need i_mutex in ext3_quota_write() because writes to quota file are serialized by dqio_mutex anyway. Changes to quota files outside of quota code are forbidded and enforced by NOATIME and IMMUTABLE bits. Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-11vfs: make it possible to access the dentry hash/len as one 64-bit entryLinus Torvalds
This allows comparing hash and len in one operation on 64-bit architectures. Right now only __d_lookup_rcu() takes advantage of this, since that is the case we care most about. The use of anonymous struct/unions hides the alternate 64-bit approach from most users, the exception being a few cases where we initialize a 'struct qstr' with a static initializer. This makes the problematic cases use a new QSTR_INIT() helper function for that (but initializing just the name pointer with a "{ .name = xyzzy }" initializer remains valid, as does just copying another qstr structure). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-04-11ext3: remove max_debt in find_group_orlov()Akira Fujita
max_debt, involved variables and calculations are no longer needed, clean them up. Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-03-31ext3: move headers to fs/ext3/Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3, UDF, and quota fixes from Jan Kara: "A couple of ext3 & UDF fixes and also one improvement in quota locking." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext3: fix start and len arguments handling in ext3_trim_fs() udf: Fix deadlock in udf_release_file() udf: Fix file entry logicalBlocksRecorded udf: Fix handling of i_blocks quota: Make quota code not call tty layer with dqptr_sem held udf: Init/maintain file entry checkpoint field ext3: Update ctime in ext3_splice_branch() only when needed ext3: Don't call dquot_free_block() if we don't update anything udf: Remove unnecessary OOM messages
2012-03-21switch open-coded instances of d_make_root() to new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-02ext3: fix start and len arguments handling in ext3_trim_fs()Lukas Czerner
The overflow might happen when passing blocknr into ext3_get_group_no_and_offset(), because it expects type ext3_fsblk_t which might be smaller than uint64_t. This will most likely happen when calling FITRIM with the default argument len = ULLONG_MAX. Fix this by using "end" variable instead of "start+len" as it is easier to get right and specifically check that the end is not beyond the end of the file system, so we are sure that the result of get_group_no_and_offset() will not overflow. Otherwise truncate it to the size of the file system. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz>
2012-02-29ext3: Update ctime in ext3_splice_branch() only when neededKazuya Mio
Currently ext3 updates ctime in ext3_splice_branch() which is called whenever we allocate one block. But it is wasteful because ext3 doesn't support nanosecond timestamp. This leads to a performance loss. Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-02-29ext3: Don't call dquot_free_block() if we don't update anythingKazuya Mio
dquot_free_block() is called in the end of ext3_new_blocks() and updates information of the inode structure. However, this update is not necessary if the number of blocks we requested is equal to the number of allocated blocks. Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2/3/4: delete unneeded includes of module.h ext{3,4}: Fix potential race when setversion ioctl updates inode udf: Mark LVID buffer as uptodate before marking it dirty ext3: Don't warn from writepage when readonly inode is spotted after error jbd: Remove j_barrier mutex reiserfs: Force inode evictions before umount to avoid crash reiserfs: Fix quota mount option parsing udf: Treat symlink component of type 2 as / udf: Fix deadlock when converting file from in-ICB one to normal one udf: Cleanup calling convention of inode_getblk() ext2: Fix error handling on inode bitmap corruption ext3: Fix error handling on inode bitmap corruption ext3: replace ll_rw_block with other functions ext3: NULL dereference in ext3_evict_inode() jbd: clear revoked flag on buffers before a new transaction started ext3: call ext3_mark_recovery_complete() when recovery is really needed
2012-01-09ext2/3/4: delete unneeded includes of module.hPaul Gortmaker
Delete any instances of include module.h that were not strictly required. In the case of ext2, the declaration of MODULE_LICENSE etc. were in inode.c but the module_init/exit were in super.c, so relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it consistent with ext3 and ext4 at the same time. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09ext{3,4}: Fix potential race when setversion ioctl updates inodeDjalal Harouni
The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation without i_mutex. This can lead to a race with the other operations that update i_ctime. This is not a big issue but let's make the ioctl consistent with how we handle e.g. other timestamp updates and use i_mutex to protect inode changes. Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09ext3: Don't warn from writepage when readonly inode is spotted after errorJan Kara
WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is remounted read-only. This unnecessarily scares users (well, they should be scared because of filesystem error, but the stack trace distracts them from the right source of their fear ;-). We could as well just remove the WARN_ON but it's not hard to fix it to not trip on filesystem with errors and not use more cycles in the common case so that's what we do. CC: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09ext3: Fix error handling on inode bitmap corruptionJan Kara
When insert_inode_locked() fails in ext3_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09ext3: replace ll_rw_block with other functionsZheng Liu
ll_rw_block() is deprecated. Thus we replace it with other functions. CC: Jan Kara <jack@suse.cz> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09ext[34]: avoid i_nlink warnings triggered by drop_nlink/inc_nlink kludge in ↵Al Viro
symlink() Both ext3 and ext4 put the half-created symlink inode into the orphan list for a while (see the comment in ext[34]_symlink() for gory details). Then, if everything went fine, they pull it out of the orphan list and bump the link count back to 1. The thing is, inc_nlink() is going to complain about seeing somebody changing i_nlink from 0 to 1. With a good reason, since normally something like that is a bug. Explicit set_nlink(inode, 1) does the same thing as inc_nlink() here, but it does *not* complain - exactly because it should be usable in strange situations like this one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-07vfs: switch ->show_options() to struct dentry *Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-07vfs: prefer ->dentry->d_sb to ->mnt->mnt_sbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04ext3: propagate umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch ->mknod() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch ->create() to umode_tAl Viro
vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch vfs_mkdir() and ->mkdir() to umode_tAl Viro
vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04vfs: fix the stupidity with i_dentry in inode destructorsAl Viro
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04vfs: mnt_drop_write_file()Al Viro
new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch a bunch of places to mnt_want_write_file()Al Viro
it's both faster (in case when file has been opened for write) and cleaner. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-02treewide: Fix typos in various parts of the kernel, and fix some comments.Justin P. Mattock
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-22ext3: NULL dereference in ext3_evict_inode()Dan Carpenter
This is an fsfuzzer bug. ->s_journal is set at the end of ext3_load_journal() but we try to use it in the error handling from ext3_get_journal() while it's still NULL. [ 337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 [ 337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.041687] PGD 0 [ 337.043118] Oops: 0002 [#1] SMP [ 337.044483] CPU 3 [ 337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan] [ 337.047633] [ 337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511 /RV411/RV511/E3511/S3511 [ 337.051064] RIP: 0010:[<ffffffff816e6539>] [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.052879] RSP: 0018:ffff8800b1d11ae8 EFLAGS: 00010282 [ 337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000 [ 337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024 [ 337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000 [ 337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000 [ 337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8 [ 337.063385] FS: 00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000 [ 337.065110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0 [ 337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0) [ 337.073800] Stack: [ 337.075487] ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000 [ 337.077255] ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250 [ 337.078851] ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31 [ 337.080284] Call Trace: [ 337.081706] [<ffffffff811f48cf>] log_start_commit+0x1f/0x40 [ 337.083107] [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0 [ 337.084490] [<ffffffff81131e31>] evict+0xa1/0x1a0 [ 337.085857] [<ffffffff81132031>] iput+0x101/0x210 [ 337.087220] [<ffffffff811339d1>] iget_failed+0x21/0x30 [ 337.088581] [<ffffffff811905fc>] ext3_iget+0x15c/0x450 [ 337.089936] [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100 [ 337.091284] [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde [ 337.092641] [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30 [ 337.093991] [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60 [ 337.095332] [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0 [ 337.096680] [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210 [ 337.098026] [<ffffffff8119a770>] ext3_mount+0x10/0x20 [ 337.099362] [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0 [ 337.100759] [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10 [ 337.102330] [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0 [ 337.103889] [<ffffffff8113611f>] do_kern_mount+0x4f/0x100 [ 337.105442] [<ffffffff811378fc>] do_mount+0x19c/0x890 [ 337.106989] [<ffffffff810e8456>] ? memdup_user+0x46/0x90 [ 337.108572] [<ffffffff810e84f3>] ? strndup_user+0x53/0x70 [ 337.110114] [<ffffffff811383fb>] sys_mount+0x8b/0xe0 [ 337.111617] [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b [ 337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38 [ 337.116588] RIP [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.118260] RSP <ffff8800b1d11ae8> [ 337.119998] CR2: 0000000000000024 [ 337.188701] ---[ end trace c36d790becac1615 ]--- Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-11-09ext3: call ext3_mark_recovery_complete() when recovery is really neededEryu Guan
Call ext3_mark_recovery_complete() in ext3_fill_super() only if needs_recovery is non-zero. Besides that, print out "recovery complete" message after calling ext3_mark_recovery_complete(). Cc: Jan Kara <jack@suse.cz> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-11-02Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue: vfs: add d_prune dentry operation vfs: protect i_nlink filesystems: add set_nlink() filesystems: add missing nlink wrappers logfs: remove unnecessary nlink setting ocfs2: remove unnecessary nlink setting jfs: remove unnecessary nlink setting hypfs: remove unnecessary nlink setting vfs: ignore error on forced remount readlinkat: ensure we return ENOENT for the empty pathname for normal lookups vfs: fix dentry leak in simple_fill_super()
2011-11-02Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Cleanup metadata flags handling udf: Skip mirror metadata FE loading when metadata FE is ok ext3: Allow quota file use root reservation udf: Remove web reference from UDF MAINTAINERS entry quota: Drop path reference on error exit from quotactl udf: Neaten udf_debug uses udf: Neaten logging output, use vsprintf extension %pV udf: Convert printks to pr_<level> udf: Rename udf_warning to udf_warn udf: Rename udf_error to udf_err udf: Promote some debugging messages to udf_error ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY. udf: Add readpages support for udf. ext3/balloc.c: local functions should be static ext2: fix the outdated comment in ext2_nfs_get_inode() ext3: remove deprecated oldalloc fs/ext3/balloc.c: delete useless initialization fs/ext2/balloc.c: delete useless initialization ext3: fix message in ext3_remount for rw-remount case ext3: Remove i_mutex from ext3_sync_file() Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h
2011-11-02filesystems: add set_nlink()Miklos Szeredi
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-10-31ext3: Allow quota file use root reservationDmitry Monakhov
Quota file is fs's metadata, so it is reasonable to permit use root resevation if necessary. This patch fix 265'th xfstest failure Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-25Merge branch 'next' of git://selinuxproject.org/~jmorris/linux-securityLinus Torvalds
* 'next' of git://selinuxproject.org/~jmorris/linux-security: (95 commits) TOMOYO: Fix incomplete read after seek. Smack: allow to access /smack/access as normal user TOMOYO: Fix unused kernel config option. Smack: fix: invalid length set for the result of /smack/access Smack: compilation fix Smack: fix for /smack/access output, use string instead of byte Smack: domain transition protections (v3) Smack: Provide information for UDS getsockopt(SO_PEERCRED) Smack: Clean up comments Smack: Repair processing of fcntl Smack: Rule list lookup performance Smack: check permissions from user space (v2) TOMOYO: Fix quota and garbage collector. TOMOYO: Remove redundant tasklist_lock. TOMOYO: Fix domain transition failure warning. TOMOYO: Remove tomoyo_policy_memory_lock spinlock. TOMOYO: Simplify garbage collector. TOMOYO: Fix make namespacecheck warnings. target: check hex2bin result encrypted-keys: check hex2bin result ...
2011-10-10ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY.Tao Ma
There are no user of EXT3_IOC32_WAIT_FOR_READONLY and also it is broken. No one set the set_ro_timer, no one wake up us and our state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it. Cc: Jan Kara <jack@suse.cz> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-04ext3/balloc.c: local functions should be staticH Hartley Sweeten
This quites the sparse noise: warning: symbol 'ext3_trim_all_free' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz>
2011-08-23block: separate priority boosting from REQ_METAChristoph Hellwig
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23block: remove READ_META and WRITE_METAChristoph Hellwig
Replace all occurnanced of the undocumented READ_META with READ | REQ_META and remove the unused WRITE_META define. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-17ext3: remove deprecated oldallocLukas Czerner
For a long time now orlov is the default block allocator in the ext3. It performs better than the old one and no one seems to claim otherwise so we can safely drop it and make oldalloc and orlov mount option deprecated. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-08-17fs/ext3/balloc.c: delete useless initializationJulia Lawall
Delete nontrivial initialization that is immediately overwritten by the result of an allocation function. The semantic match that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; identifier i; expression e; @@ ( T i = \(0\|NULL\|ERR_PTR(...)\); | -T i = e; +T i; ) ... when != i i = \(kzalloc\|kcalloc\|kmalloc\)(...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jan Kara <jack@suse.cz>
2011-08-17ext3: fix message in ext3_remount for rw-remount caseToshiyuki Okajima
If there are some inodes in orphan list while a filesystem is being read-only mounted, we should recommend that peole umount and then mount it when they try to remount with read-write. But the current message and comment recommend that they umount and then remount it which may be slightly misleading. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz>