summaryrefslogtreecommitdiff
path: root/fs/ext4/dir.c
AgeCommit message (Collapse)Author
2011-01-10ext4: Use ext4_error_file() to print the pathname to the corrupted inodeTheodore Ts'o
Where the file pointer is available, use ext4_error_file() instead of ext4_error_inode(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-20ext4: optimize ext4_check_dir_entry() with unlikely() annotationsTheodore Ts'o
This function gets called a lot for large directories, and the answer is almost always "no, no, there's no problem". This means using unlikely() is a good thing. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28ext4: improve llseek error handling for overly large seek offsetsToshiyuki Okajima
The llseek system call should return EINVAL if passed a seek offset which results in a write error. What this maximum offset should be depends on whether or not the huge_file file system feature is set, and whether or not the file is extent based or not. If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be written (write systemcall) is different from the maximum size which can be sought (lseek systemcall). For example, the following 2 cases demonstrates the differences between the maximum size which can be written, versus the seek offset allowed by the llseek system call: #1: mkfs.ext3 <dev>; mount -t ext4 <dev> #2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev> Table. the max file size which we can write or seek at each filesystem feature tuning and file flag setting +============+===============================+===============================+ | \ File flag| | | | \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL | |case \| | | +------------+-------------------------------+-------------------------------+ | #1 | write: 2194719883264 | write: -------------- | | | seek: 2199023251456 | seek: -------------- | +------------+-------------------------------+-------------------------------+ | #2 | write: 4402345721856 | write: 17592186044415 | | | seek: 17592186044415 | seek: 17592186044415 | +------------+-------------------------------+-------------------------------+ The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes (= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes. (llseek of ext4_file_operations is generic_file_llseek which uses sb->s_maxbytes.) Therefore we create ext4 llseek function which uses 2 maxbytes. The new own function originates from generic_file_llseek(). If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-07-27ext4: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Pass line numbers to ext4_error() and friendsTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Cleanup ext4_check_dir_entry so __func__ is now implicitTheodore Ts'o
Also start passing the line number to ext4_check_dir since we're going to need it in upcoming patch. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14ext4: Convert more i_flags references to use accessor functionsTheodore Ts'o
These changes are not ones which are likely to result in races, but they should be fixed. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-17ext4: Use bitops to read/modify i_flags in struct ext4_inode_infoDmitry Monakhov
At several places we modify EXT4_I(inode)->i_flags without holding i_mutex (ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_flags. So convert handling of i_flags to use bitops which are atomic. https://bugzilla.kernel.org/show_bug.cgi?id=15792 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-17ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()Theodore Ts'o
EXT4_ERROR_INODE() tends to provide better error information and in a more consistent format. Some errors were not even identifying the inode or directory which was corrupted, which made them not very useful. Addresses-Google-Bug: #2507977 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-17ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()Theodore Ts'o
This saves a huge amount of stack space by avoiding unnecesary struct buffer_head's from being allocated on the stack. In addition, to make the code easier to understand, collapse and refactor ext4_get_block(), ext4_get_block_write(), noalloc_get_block_write(), into a single function. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-03-05ext4: fix up rb_root initializations to use RB_ROOTVenkatesh Pallipadi
ext4 uses rb_node = NULL; to zero rb_root at few places. Using RB_ROOT as the initializer is more portable in case the underlying implementation of rbtrees changes in the future. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Eric Paris <eparis@redhat.com>
2010-03-02ext4: make "offset" consistent in ext4_check_dir_entry()Toshiyuki Okajima
The callers of ext4_check_dir_entry() usually pass in the "file offset" (ext4_readdir, htree_dirblock_to_tree, search_dirblock, ext4_dx_find_entry, empty_dir), but a few callers (add_dirent_to_buf, ext4_delete_entry) only pass in the buffer offset. To accomodate those last two (which would be hard to fix otherwise), this patch changes ext4_check_dir_entry() to print the physical block number and the relative offset as well as the passed-in offset. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-15ext4: move __func__ into a macro for ext4_warning, ext4_errorEric Sandeen
Just a pet peeve of mine; we had a mishash of calls with either __func__ or "function_name" and the latter tends to get out of sync. I think it's easier to just hide the __func__ in a macro, and it'll be consistent from then on. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-14ext4: Define a new set of flags for ext4_get_blocks()Theodore Ts'o
The functions ext4_get_blocks(), ext4_ext_get_blocks(), and ext4_ind_get_blocks() used an ad-hoc set of integer variables used as boolean flags passed in as arguments. Use a single flags parameter and a setandard set of bitfield flags instead. This saves space on the call stack, and it also makes the code a bit more understandable. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-14ext4: Rename ext4_get_blocks_wrap() to be ext4_get_blocks()Theodore Ts'o
Another function rename for clarity's sake. The _wrap prefix simply confuses people, and didn't add much people trying to follow the code paths. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-15ext4: New rec_len encoding for very large blocksizesWei Yongjun
The rec_len field in the directory entry is 16 bits, so to encode blocksizes larger than 64k becomes problematic. This patch allows us to supprot block sizes up to 256k, by using the low 2 bits to extend the range of rec_len to 2**18-1 (since valid rec_len sizes must be a multiple of 4). We use the convention that a rec_len of 0 or 65535 means the filesystem block size, for compatibility with older kernels. It's unlikely we'll see VM pages of up to 256k, but at some point we might find that the Linux VM has been enhanced to support filesystem block sizes > than the VM page size, at which point it might be useful for some applications to allow very large filesystem block sizes. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-06ext4: Make printk's consistently prefixed with "EXT4-fs: "Theodore Ts'o
Previously, some were "ext4: ", and some were "EXT4: "; change them to be consistent with most ext4 printk's, which is to use "EXT4-fs: ". Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-05ext4: Change unsigned long to unsigned intTheodore Ts'o
Convert the unsigned longs that are most responsible for bloating the stack usage on 64-bit systems. Nearly all places in the ext3/4 code which uses "unsigned long" is probably a bug, since on 32-bit systems a ulong a 32-bits, which means we are wasting stack space on 64-bit systems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-26ext4: Fix duplicate entries returned from getdents() system callTheodore Ts'o
Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
2008-10-09ext4: Avoid printk floods in the face of directory corruptionEric Sandeen
Note: some people thinks this represents a security bug, since it might make the system go away while it is printing a large number of console messages, especially if a serial console is involved. Hence, it has been assigned CVE-2008-3528, but it requires that the attacker either has physical access to your machine to insert a USB disk with a corrupted filesystem image (at which point why not just hit the power button), or is otherwise able to convince the system administrator to mount an arbitrary filesystem image (at which point why not just include a setuid shell or world-writable hard disk device file or some such). Me, I think they're just being silly. --tytso Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-ext4@vger.kernel.org Cc: Eugene Teo <eugeneteo@kernel.sg>
2008-09-09ext4: Fix whitespace checkpatch warnings/errorsTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-09ext4: Add printk priority levels to clean up checkpatch warningsTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-08-20ext4: Fix ext4_dx_readdir hash collision handlingTheodore Ts'o
This fixes a bug where readdir() would return a directory entry twice if there was a hash collision in an hash tree indexed directory. Signed-off-by: Eugene Dashevsky <eugene@ibrix.com> Signed-off-by: Mike Snitzer <msnitzer@ibrix.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-14ext4: delayed allocation ENOSPC handlingMingming Cao
This patch does block reservation for delayed allocation, to avoid ENOSPC later at page flush time. Blocks(data and metadata) are reserved at da_write_begin() time, the freeblocks counter is updated by then, and the number of reserved blocks is store in per inode counter. At the writepage time, the unused reserved meta blocks are returned back. At unlink/truncate time, reserved blocks are properly released. Updated fix from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> to fix the oldallocator block reservation accounting with delalloc, added lock to guard the counters and also fix the reservation for meta blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-07-11ext4: improve some code in rb tree part of dir.cShen Feng
* remove unnecessary code in free_rb_tree_fname * rename free_rb_tree_fname to ext4_htree_create_dir_info since it and ext4_htree_free_dir_info are a pair * replace kmalloc with kzalloc in ext4_htree_free_dir_info All these make the code more readable and simple. PS: this patch is also suitable for ext3. Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: move headers out of include/linuxChristoph Hellwig
Move ext4 headers out of include/linux. This is just the trivial move, there's some more thing that could be done later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-30Convert ext4 to use unlocked_ioctlAndi Kleen
I checked ext4_ioctl and it looked largely safe to not be used without BKL. So convert it over to unlocked_ioctl. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-02-25Remove incorrect BKL comments in ext4Andi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-29ext4: Introduce ext4_lblk_tAneesh Kumar K.V
This patch adds a new data type ext4_lblk_t to represent the logical file blocks. This is the preparatory patch to support large files in ext4 The follow up patch with convert the ext4_inode i_blocks to represent the number of blocks in file system block size. This changes makes it possible to have a block number 2**32 -1 which will result in overflow if the block number is represented by signed long. This patch convert all the block number to type ext4_lblk_t which is typedef to __u32 Also remove dead code ext4_ext_walk_space Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-29ext4: Avoid rec_len overflow with 64KB block sizeJan Kara
With 64KB blocksize, a directory entry can have size 64KB which does not fit into 16 bits we have for entry lenght. So we store 0xffff instead and convert value when read from / written to disk. The patch also converts some places to use ext4_next_entry() when we are changing them anyway. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17ext4: remove #ifdef CONFIG_EXT4_INDEXEric Sandeen
CONFIG_EXT4_INDEX is not an exposed config option in the kernel, and it is unconditionally defined in ext4_fs.h. tune2fs is already able to turn off dir indexing, so at this point it's just cluttering up the code. Remove it. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-10-17Fix f_version type: should be u64 instead of unsigned longMathieu Desnoyers
Fix f_version type: should be u64 instead of long There is a type inconsistency between struct inode i_version and struct file f_version. fs.h: struct inode u64 i_version; and struct file unsigned long f_version; Users do: fs/ext3/dir.c: if (filp->f_version != inode->i_version) { So why isn't f_version a u64 ? It becomes a problem if versions gets higher than 2^32 and we are on an architecture where longs are 32 bits. This patch changes the f_version type to u64, and updates the users accordingly. It applies to 2.6.23-rc2-mm2. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Martin Bligh <mbligh@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16readahead: combine file_ra_state.prev_index/prev_offset into prev_posFengguang Wu
Combine the file_ra_state members unsigned long prev_index unsigned int prev_offset into loff_t prev_pos It is more consistent and better supports huge files. Thanks to Peter for the nice proposal! [akpm@linux-foundation.org: fix shift overflow] Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19readahead: split ondemand readahead interface into two functionsRusty Russell
Split ondemand readahead interface into two functions. I think this makes it a little clearer for non-readahead experts (like Rusty). Internally they both call ondemand_readahead(), but the page argument is changed to an obvious boolean flag. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19readahead: convert ext3/ext4 invocationsFengguang Wu
Convert ext3/ext4 dir reads to use on-demand readahead. Readahead for dirs operates _not_ on file level, but on blockdev level. This makes a difference when the data blocks are not continuous. And the read routine is somehow opaque: there's no handy info about the status of current page. So a simplified call scheme is employed: to call into readahead whenever the current page falls out of readahead windows. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Steven Pratt <slpratt@austin.ibm.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-08[PATCH] ext4: change uses of f_{dentry, vfsmnt} to use f_pathJosef "Jeff" Sipek
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext4 filesystem. Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] handle ext4 directory corruption betterEric Sandeen
I've been using Steve Grubb's purely evil "fsfuzzer" tool, at http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz Basically it makes a filesystem, splats some random bits over it, then tries to mount it and do some simple filesystem actions. At best, the filesystem catches the corruption gracefully. At worst, things spin out of control. As you might guess, we found a couple places in ext4 where things spin out of control :) First, we had a corrupted directory that was never checked for consistency... it was corrupt, and pointed to another bad "entry" of length 0. The for() loop looped forever, since the length of ext4_next_entry(de) was 0, and we kept looking at the same pointer over and over and over and over... I modeled this check and subsequent action on what is done for other directory types in ext4_readdir... (adding this check adds some computational expense; I am testing a followup patch to reduce the number of times we check and re-check these directory entries, in all cases. Thanks for the idea, Andreas). Next we had a root directory inode which had a corrupted size, claimed to be > 200M on a 4M filesystem. There was only really 1 block in the directory, but because the size was so large, readdir kept coming back for more, spewing thousands of printk's along the way. Per Andreas' suggestion, if we're in this read error condition and we're trying to read an offset which is greater than i_blocks worth of bytes, stop trying, and break out of the loop. With these two changes fsfuzz test survives quite well on ext4. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4 whitespace cleanupsAndrew Morton
Someone's tab key is emitting spaces. Attempt to repair some of the damage. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext3: add extent map supportAlex Tomas
On disk extents format: /* * this is extent on-disk structure * it's used at the bottom of the tree */ struct ext3_extent { __le32 ee_block; /* first logical block extent covers */ __le16 ee_len; /* number of blocks covered by extent */ __le16 ee_start_hi; /* high 16 bits of physical block */ __le32 ee_start; /* low 32 bigs of physical block */ }; Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbdMingming Cao
Reworked from a patch by Mingming Cao and Randy Dunlap Signed-off-By: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbolsMingming Cao
Mingming Cao originally did this work, and Shaggy reproduced it using some scripts from her. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: initial copy of files from ext3Dave Kleikamp
Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for details. This is a simple copy of the files in fs/ext3 to fs/ext4 and /usr/incude/linux/ext3* to /usr/include/ex4* Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>