summaryrefslogtreecommitdiff
path: root/fs/gfs2/util.h
AgeCommit message (Collapse)Author
2012-06-06GFS2: Fix error handling when reading an invalid block from the journalSteven Whitehouse
When we read an invalid block from the journal, we should not call withdraw, but simply print a message and return an error. It is up to the caller to then handle that error. In the case of mount that means a failed mount, rather than a withdraw (requiring a reboot). In the case of recovering another nodes journal then we return an error via the uevent. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24GFS2: Clean up log write code pathSteven Whitehouse
Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24GFS2: Use slab for block reservation memoryBob Peterson
This patch changes block reservations so it uses slab storage. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-08GFS2: Remove a __GFP_NOFAIL allocationSteven Whitehouse
In order to ensure that we've got enough buffer heads for flushing the journal, the orignal code used __GFP_NOFAIL when performing this allocation. Here we dispense with that in favour of using a mempool. This should improve efficiency in low memory conditions since flushing the journal is a good way to get memory back, we don't want to be spinning, waiting on memory allocations. The buffers which are allocated via this mempool are fairly short lived, so that we'll recycle them pretty quickly. Although there are other memory allocations which occur during the journal flush process, this is the one which can potentially require the most memory, so the most important one to fix. The amount of memory reserved is a fixed amount, and we should not need to scale it when there are a greater number of filesystems in use. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-01GFS2: Metadata address space clean upSteven Whitehouse
Since the start of GFS2, an "extra" inode has been used to store the metadata belonging to each inode. The only reason for using this inode was to have an extra address space, the other fields were unused. This means that the memory usage was rather inefficient. The reason for keeping each inode's metadata in a separate address space is that when glocks are requested on remote nodes, we need to be able to efficiently locate the data and metadata which relating to that glock (inode) in order to sync or sync and invalidate it (depending on the remotely requested lock mode). This patch adds a new type of glock, which has in addition to its normal fields, has an address space. This applies to all inode and rgrp glocks (but to no other glock types which remain as before). As a result, we no longer need to have the second inode. This results in three major improvements: 1. A saving of approx 25% of memory used in caching inodes 2. A removal of the circular dependency between inodes and glocks 3. No confusion between "normal" and "metadata" inodes in super.c Although the first of these is the more immediately apparent, the second is just as important as it now enables a number of clean ups at umount time. Those will be the subject of future patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05GFS2: Clean up & move gfs2_quotadSteven Whitehouse
This patch is a clean up of gfs2_quotad prior to giving it an extra job to do in addition to the current portfolio of updating the quota and statfs information from time to time. As a result it has been moved into quota.c allowing one of the functions it calls to be made static. Also the clean up allows the two existing functions to have separate timeouts and also to coexist with its future role of dealing with the "truncate in progress" inode flag. The (pointless) setting of gfs2_quotad_secs is removed since we arrange to only wake up quotad when one of the two timers expires. In addition the struct gfs2_quota_data is moved into a slab cache, mainly for easier debugging. It should also be possible to use a shrinker in the future, rather than the current scheme of scanning the quota data entries from time to time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-30fs: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-31[GFS2] Remove lm.[ch] and distribute contentSteven Whitehouse
The functions in lm.c were just wrappers which were mostly only used in one other file. By moving the functions to the files where they are being used, they can be marked static and also this will usually result in them being inlined since they are often only used from one point in the code. A couple of really trivial functions have been inlined by hand into the function which called them as it makes the code clearer to do that. We also gain from one fewer function call in the glock lock and unlock paths. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Allocate gfs2_rgrpd from slab memoryBob Peterson
This patch moves the gfs2_rgrpd structure to its own slab memory. This makes it easier to control and monitor, and yields less memory fragmentation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-12-07Merge master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (73 commits) [DLM] Clean up lowcomms [GFS2] Change gfs2_fsync() to use write_inode_now() [GFS2] Fix indent in recovery.c [GFS2] Don't flush everything on fdatasync [GFS2] Add a comment about reading the super block [GFS2] Mount problem with the GFS2 code [GFS2] Remove gfs2_check_acl() [DLM] fix format warnings in rcom.c and recoverd.c [GFS2] lock function parameter [DLM] don't accept replies to old recovery messages [DLM] fix size of STATUS_REPLY message [GFS2] fs/gfs2/log.c:log_bmap() fix printk format warning [DLM] fix add_requestqueue checking nodes list [GFS2] Fix recursive locking in gfs2_getattr [GFS2] Fix recursive locking in gfs2_permission [GFS2] Reduce number of arguments to meta_io.c:getbuf() [GFS2] Move gfs2_meta_syncfs() into log.c [GFS2] Fix journal flush problem [GFS2] mark_inode_dirty after write to stuffed file [GFS2] Fix glock ordering on inode creation ...
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-30[GFS2] gfs2 misc endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Make headers compile on their ownSteven Whitehouse
As per Jan Engelhardt's comments, this should make all the headers compile on their own by including and/or declaring structures early. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Change all types to uX styleSteven Whitehouse
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-21[GFS2] Move BUG() back into the header fileSteven Whitehouse
In order to make the file and line number reporting work correctly, this has been moved back into the header file. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-21[GFS2] sem -> mutex conversion in locking.cSteven Whitehouse
Convert a semaphore to a mutex in locking.c and also tidy up one or two loose ends. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-30[GFS] Fix bug in endian conversion for metadata headerSteven Whitehouse
In some cases 16 bit functions were being used rather than 32 bit functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28[GFS2] Further updates to dir and logging codeSteven Whitehouse
This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18[GFS2] Remove unused code from various filesSteven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>