summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits) [GFS2] Allow journal recovery on read-only mount [GFS2] Lockup on error [GFS2] Fix page_mkwrite truncation race path [GFS2] Fix typo [GFS2] Fix write alloc required shortcut calculation [GFS2] gfs2_alloc_required performance [GFS2] Remove unneeded i_spin [GFS2] Reduce inode size by moving i_alloc out of line [GFS2] Fix assert in log code [GFS2] Fix problems relating to execution of files on GFS2 [GFS2] Initialize extent_list earlier [GFS2] Allow page migration for writeback and ordered pages [GFS2] Remove unused variable [GFS2] Fix log block mapper [GFS2] Minor correction [GFS2] Eliminate the no longer needed sd_statfs_mutex [GFS2] Incremental patch to fix compiler warning [GFS2] Function meta_read optimization [GFS2] Only fetch the dinode once in block_map [GFS2] Reorganize function gfs2_glmutex_lock ...
2008-01-25[GFS2] Allow journal recovery on read-only mountAbhijith Das
This patch allows gfs2 to perform journal recovery even if it is mounted read-only. Strictly speaking, a read-only mount should not be writing to the filesystem, but we do this only to perform journal recovery. A read-only mount will fail if we don't recover the dirty journal. Also, when gfs2 is used as a root filesystem, it will be mounted read-only before being mounted read-write during the boot sequence. A failed read-only mount will panic the machine during bootup. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Lockup on errorBob Peterson
I spotted this bug while I was digging around. Looks like it could cause a lockup in some rare error condition. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix page_mkwrite truncation race pathSteven Whitehouse
There was a bug in the truncation/invalidation race path for ->page_mkwrite for gfs2. It ought to return 0 so that the effect is the same as if the page was truncated at any of the other points at which the page_lock is dropped. This will result in the restart of the whole page fault path. If it was due to a real truncation (as opposed to an invalidate because we let a glock go) then the ->fault path will pick that up when it gets called again. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix typoBob Peterson
This patch fixes a minor typo. Surprisingly, it still compiled. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix write alloc required shortcut calculationSteven Whitehouse
The comparison was being made against the wrong quantity. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] gfs2_alloc_required performanceBob Peterson
This is a small I/O performance enhancement to gfs2. (Actually, it is a rework of an earlier version I got wrong). The idea here is to check if the write extends past the last block in the file. If so, the function can save itself a lot of time and trouble because it knows an allocate will be required. Benchmarks like iozone should see better performance. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unneeded i_spinBob Peterson
This patch removes a vestigial variable "i_spin" from the gfs2_inode structure. This not only saves us memory (>300000 of these in memory for the oom test) it also saves us time because we don't have to spend time initializing it (i.e. slightly better performance). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reduce inode size by moving i_alloc out of lineSteven Whitehouse
It is possible to reduce the size of GFS2 inodes by taking the i_alloc structure out of the gfs2_inode. This patch allocates the i_alloc structure whenever its needed, and frees it afterward. This decreases the amount of low memory we use at the expense of requiring a memory allocation for each page or partial page that we write. A quick test with postmark shows that the overhead is not measurable and I also note that OCFS2 use the same approach. In the future I'd like to solve the problem by shrinking down the size of the members of the i_alloc structure, but for now, this reduces the immediate problem of using too much low-memory on x86 and doesn't add too much overhead. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix assert in log codeSteven Whitehouse
Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix problems relating to execution of files on GFS2Steven Whitehouse
This patch fixes a couple of problems which affected the execution of files on GFS2. The first is that there was a corner case where inodes were not always uptodate at the point at which permissions checks were being carried out, this was resulting in refusal of execute permission, but only on the first lookup, subsequent requests worked correctly. The second was a problem relating to incorrect updating of file sizes which was introduced with the write_begin/end code for GFS2 a little while back. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
2008-01-25[GFS2] Initialize extent_list earlierBob Peterson
Here is a patch for the latest upstream GFS2 code: The journal extent map needs to be initialized sooner than it currently is. Otherwise failed mount attempts (e.g. not enough journals, etc.) may panic trying to access the uninitialized list. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Allow page migration for writeback and ordered pagesSteven Whitehouse
To improve performance on NUMA, we use the VM's standard page migration for writeback and ordered pages. Probably we could also do the same for journaled data, but that would need a careful audit of the code, so will be the subject of a later patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variableSteven Whitehouse
The go_drop_th function is never called or referenced. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix log block mapperSteven Whitehouse
A missing offset in the calculation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Minor correctionBob Peterson
This is a small correction to my previously posted patch1. It just changes a divide to a shift. It's faster and doesn't introduce odd dependencies on 32-bit compiles. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Eliminate the no longer needed sd_statfs_mutexBob Peterson
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves the ordering as discussed. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Incremental patch to fix compiler warningBob Peterson
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Function meta_read optimizationBob Peterson
This patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait was being called regardless of whether a disk read was requested. This just pulls that wait into the if that triggers the read. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Only fetch the dinode once in block_mapBob Peterson
Function gfs2_block_map was often looking up the disk inode twice. This optimizes it so that only does it once. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reorganize function gfs2_glmutex_lockBob Peterson
This patch optimizes the function gfs2_glmutex_lock. The basic theory is: Why bother initializing a holder, setting up wait bits and then waiting on them, if you know the glock can be yours. So the holder stuff is placed inside the if checking if the glock is locked. This one needs careful scrutiny because changing anything to do with locking should strike terror into one's heart. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Run through full bitmaps quicker in gfs2_bitfitBob Peterson
I eliminated the passing of an unused parameter into gfs2_bitfit called rgd. This also changes the gfs2_bitfit code that searches for free (or used) blocks. Before, the code was trying to check for bytes that indicated 4 blocks in the undesired state. The problem is, it was spending more time trying to do this than it actually was saving. This version only optimizes the case where we're looking for free blocks, and it checks a machine word at a time. So on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit machines, it will check 64-bits (32 blocks) at a time. The compiler optimizes that quite well and we save some time, especially when running through full bitmaps (like the bitmaps allocated for the journals). There's probably a more elegant or optimized way to do this, but I haven't thought of it yet. I'm open to suggestions. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Get rid of useless "found" variable in quota.cBob Peterson
This just eliminates an unused variable from the quota code. Not likely to be a time saver. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Journal extent mappingBob Peterson
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove function gfs2_get_blockBob Peterson
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] use pid for plock owner for nfs clientsDavid Teigland
The fl_owner is that of lockd when posix locks arrive from nfs clients, so it can't be used to distinguish between lock holders. Use fl_pid as owner instead; it's the pid of the process on the nfs client. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variableSteven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] patch to check for recursive lock requests in gfs2_rename code pathAbhijith Das
A certain scenario in the rename code path triggers a kernel BUG() because it accidentally does recursive locking The first lock is requested to unlink an already existing inode (replacing a file) and the second lock is requested when the destination directory needs to alloc some space. It is rare that these two events happen during the same rename call, and even more rare that these two instances try to lock the same rgrp. It is, however, possible. https://bugzilla.redhat.com/show_bug.cgi?id=404711 Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove lock methods for lock_nolock protocolWendy Cheng
GFS2 supports two modes of locking - lock_nolock for single node filesystem and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from file operation table for lock_nolock protocol. This would allow VFS to handle posix lock and flock logics just like other in-tree filesystems without duplication. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unrequired codeFabio M. Di Nitto
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix build warningsFabio Massimo Di Nitto
Hi Steven, Steven Whitehouse wrote: > Hi, > > Now in the -nmw git tree. Thanks, > > Steve. > > On Wed, 2007-11-21 at 11:54 -0600, Ryan O'Hara wrote: this patch introduces a bunch of build warnings by leaving around struct inode *inode = &ip->i_inode; The patch in attachment cleans them up. Please apply. Signed-off-by: Fabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] remove unnecessary permission checksRyan O'Hara
Remove read/write permission() checks from xattr operations. VFS layer is already handling permission for xattrs via the xattr_permission() call, so there is no need for gfs2 to check permissions. Futhermore, using permission() for SELinux xattrs ops is incorrect. Signed-off-by: Ryan O'Hara <rohara@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix runtime issue with UP kernelsFabio Massimo Di Nitto
The issue is indeed UP vs SMP and it is totally random. spin_is_locked() is a bad assertion because there is no correct answer on UP. on UP spin_is_locked() has to return either one value or another, always. This means that in my setup I am lucky enough to trigger the issue and your you are lucky enough not to. the patch in attachment removes the bogus calls to BUG_ON and according to David (in CC and thanks for the long explanation on the problem) we can rely upon things like lockdep to find problem that might be trying to catch. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] tidy up error messageDavid Teigland
Print error with log_error() to be consistent with others. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Check for installation of mount helpers for DLM mountsFabio Massimo Di Nitto
The patch is a fix to abort mount if the mount.gfs* and possible umount.* are missing from /sbin. While we do what we can to guarantee that they are installed properly in userland (CVS HEAD), we want to make sure that mount still aborts properly. The only sign of missing helpers is that lock_dlm will receive no mount options at all. According to David the problem does not exist for lock_nolock as the helpers are not required. The patch has been tested for both gfs and gfs2 and it works as expected. The lack of mount.gfs* will generate an error that is propagated to mount: oot@node1:~# mount -t gfs2 /dev/nbd2 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/nbd2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so [ 3513.303346] GFS2: fsid=: Trying to join cluster "lock_dlm", "gutsy:gfs2" [ 3513.304546] DLM/GFS2/GFS ERROR: (u)mount helpers are not installed properly! [ 3513.306290] GFS2: fsid=: can't mount proto=lock_dlm, table=gutsy:gfs2, hostdata= You might want to notice that it will also avoid mount to hang or fail silently or with strange errors that will require the cluster to reboot/restart before you can actually mount the filesystem again. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't periodically update the jindexSteven Whitehouse
We only care about the content of the jindex in two cases, one is when we mount the fs and the other is when we need to recover another journal. In both cases we have to update the jindex anyway, so there is no point in updating it periodically between times, so this removes it to simplify gfs2_logd. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Move gfs2_logd into log.cSteven Whitehouse
This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use atomic_t for journal free blocks counterSteven Whitehouse
This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't add glocks to the journalSteven Whitehouse
The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] check kthread_should_stop when waitingDavid Teigland
Use wait_event_interruptible() in the lock_dlm thread instead of an open coded equivalent, and include a kthread_should_stop() check in the wait test so we don't miss a kthread_stop(). Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Given device ID rather than s_id in "id" sysfs fileBob Peterson
This patch changes the /sys/fs/gfs2/<s_id>/id file to give the device id "major:minor" rather than the s_id. That enables gfs2_tool to match devices properly (by id, not name) when locating the tuning files. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove flags no longer requiredSteven Whitehouse
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders depending upon which of the two waiters lists they were going to be queued upon. They were then tested when the holders were taken off the lists to ensure that the right type of holder was being dequeued. Since we are already using separate lists, there doesn't seem a lot of point having these flags as well, and since setting them and testing them is in the fast path for locking and unlocking glock, this patch removes them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reorder writeback for glock syncSteven Whitehouse
Previously we were doing (write data, wait for data, write metadata, wait for metadata). After this patch we so (write metadata, write data, wait for data, wait for metadata) which should be more efficient. Also I noticed that the drop_bh and xmote_bh functions were almost identical. In fact the only difference was a single test, and that test is such that in the drop_bh case, it would always evaluate to the correct result. As such we can use the xmote_bh functions in all the places where we were using the drop_bh function and remove the drop_bh functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Add sync_page to metadata address space operationsSteven Whitehouse
This set of address space operations was missing a sync_page operation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove "reclaim limit"Steven Whitehouse
This call to reclaim glocks is not needed, and in particular we don't want it in the fast path for locking glocks. The limit was entirely arbitrary anyway and we can't expect users to adjust things like this, the remaining code will do the right thing on its own. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variablesSteven Whitehouse
These haven't been used for some time, remove them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use correct include file in ops_address.cSteven Whitehouse
Something changed in the upstream kernel, and it needs this one-liner to allow ops_address.c to build. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't hold page lock when starting transactionSteven Whitehouse
This is an addendum to the new AOPs work which moves the point at which we take the page lock so that we don't get it until the last possible moment. This resolves a conflict between starting transactions and the page lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Add writepages for GFS2 jdataSteven Whitehouse
This patch resolves a lock ordering issue where we had been getting a transaction lock in the wrong order with respect to the page lock. By using writepages rather than just writepage, it is then possible to start a transaction before locking the page, and thus matching the locking order elsewhere in the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Split gfs2_writepage into three casesSteven Whitehouse
This patch splits gfs2_writepage into separate functions for each of the three cases: writeback, ordered and journalled. As a result it becomes a lot easier to see what each one is doing. The common code is moved into gfs2_writepage_common. This fixes a performance bug where we were doing more work than strictly required in the ordered write case. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>