summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2007-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] Accept old format NFS filehandles [GFS2] Small fixes to logging code [DLM] dump more lock values [GFS2] Remove i_mode passing from NFS File Handle [GFS2] Obtaining no_formal_ino from directory entry [GFS2] git-gfs2-nmw-build-fix [GFS2] System won't suspend with GFS2 file system mounted [GFS2] remounting w/o acl option leaves acls enabled [GFS2] inode size inconsistency [DLM] Telnet to port 21064 can stop all lockspaces [GFS2] Fix gfs2_block_truncate_page err return [GFS2] Addendum to the journaled file/unmount patch [GFS2] Simplify multiple glock aquisition [GFS2] assertion failure after writing to journaled file, umount [GFS2] Use zero_user_page() in stuffed_readpage() [GFS2] Remove bogus '\0' in rgrp.c [GFS2] Journaled file write/unstuff bug [DLM] don't require FS flag on all nodes [GFS2] Fix deallocation issues [GFS2] return conflicts for GETLK ...
2007-07-10[GFS2] Accept old format NFS filehandlesSteven Whitehouse
On Tue, 2007-07-10 at 10:06 +0100, Christoph Hellwig wrote: > > -#define GFS2_LARGE_FH_SIZE 10 > > - > > -struct gfs2_fh_obj { > > - struct gfs2_inum_host this; > > - u32 imode; > > -}; > > +#define GFS2_LARGE_FH_SIZE 8 > > Because gfs2_decode_fh only accepts file handles with GFS2_LARGE_FH_SIZE > or GFS2_LARGE_FH_SIZE you don't accept filehandles sent out by and older > gfs version anymore. Stale filehandles because of a new kernel version > are a big no-no, so please add back code to handle the old filehandles > on the decode side. > This should fix that problem I think since its only relating to end of the fh we can just ignore that field in order to accept the older format. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wendy Cheng <wcheng@redhat.com>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-09[GFS2] Small fixes to logging codeSteven Whitehouse
This reverts part of an earlier patch which tried to reclaim gfs2_bufdata structures too early and resulted in a "use after free" case (this bit from me). Also a change to not write out log headers unless we really need to (in the case of flushing nothing we don't need a header) from Bob. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2007-07-09[GFS2] Remove i_mode passing from NFS File HandleWendy Cheng
GFS2 has been passing i_mode within NFS File Handle. Other than the wrong assumption that there is always room for this extra 16 bit value, the current gfs2_get_dentry doesn't really need the i_mode to work correctly. Note that GFS2 NFS code does go thru the same lookup code path as direct file access route (where the mode is obtained from name lookup) but gfs2_get_dentry() is coded for different purpose. It is not used during lookup time. It is part of the file access procedure call. When the call is invoked, if on-disk inode is not in-memory, it has to be read-in. This makes i_mode passing a useless overhead. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Obtaining no_formal_ino from directory entryWendy Cheng
GFS2 lookup code doesn't ask for inode shared glock. This implies during in-memory inode creation for existing file, GFS2 will not disk-read in the inode contents. This leaves no_formal_ino un-initialized during lookup time. The un-initialized no_formal_ino is subsequently encoded into file handle. Clients will get ESTALE error whenever it tries to access these files. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] System won't suspend with GFS2 file system mountedAbhijith Das
The kernel threads in gfs2, namely gfs2_scand, gfs2_logd, gfs2_quotad, gfs2_glockd, gfs2_recoverd weren't doing anything when the suspend mechanism was trying to freeze them. I put in calls to refrigerator() in the loops for all the daemons and suspend works as expected. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] remounting w/o acl option leaves acls enabledBob Peterson
This patch is for bugzilla bug #245663. This crosswrites a fix from gfs1 (bz #210369) so that the mount options are reset properly upon remount. This was tested on system trin-10. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] inode size inconsistencyWendy Cheng
This should have been part of the NFS patch #1 but somehow I missed it when packaging the patches. It is not a critical issue as the others (I hope). RHEL 5.1 31.el5 kernel runs fine without this change. Our truncate code is chopped into two parts, one for vfs inode changes (in vmtruncate()) and one of gfs inode (in gfs2_truncatei()). These two operatons are, unfortunately, not atomic. So it could happens that vmtruncate() succeeds (inode->i_size is changed) but gfs2_truncatei fails (say kernel temporarily out of memory). This would leave gfs inode i_di.di_size out of sync with vfs inode i_size. It will later confuse gfs2_commit_write() if a write is issued. Last time I checked, it will cause file corruption. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix gfs2_block_truncate_page err returnS. Wendy Cheng
Code segment inside gfs2_block_truncate_page() doesn't set the return code correctly. This causes NFSD erroneously returns EIO back to client with setattr procedure call (truncate error). Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Addendum to the journaled file/unmount patchRobert Peterson
This patch is an addendum to the previous journaled file/unmount patch. It fixes a problem discovered during testing. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Simplify multiple glock aquisitionSteven Whitehouse
There is a bug in the code which acquires multiple glocks where if the initial out-of-order attempt fails part way though we can land up trying to acquire the wrong number of glocks. This is part of the fix for red hat bz #239737. The other part of the bz doesn't apply to upstream kernels since it was fixed by: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3717bdf8f08a0e1039158c8bab2c24d20f492b6 Since the out-of-order code doesn't appear to add anything to the performance of GFS2, this patch just removed it rather than trying to fix it. It should be much easier to see whats going on here now. In addition, we don't allocate any memory unless we are using a lot of glocks (which is a relatively uncommon case). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] assertion failure after writing to journaled file, umountRobert Peterson
This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Use zero_user_page() in stuffed_readpage()Steven Whitehouse
As suggested by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Robert P. J. Day <rpjday@mindspring.com>
2007-07-09[GFS2] Remove bogus '\0' in rgrp.cSteven Whitehouse
Not sure how it slipped in, but we don't want it anyway. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Journaled file write/unstuff bugRobert Peterson
This patch is for bugzilla bug 283162, which uncovered a number of bugs pertaining to writing to files that have the journaled bit on. These bugs happen most often when writing to the meta_fs because the files are always journaled. So operations like gfs2_grow were particularly vulnerable, although many of the problems could be recreated with normal files after setting the journaled bit on. The problems fixed are: -GFS2 wasn't ever writing unstuffed journaled data blocks to their in-place location on disk. Now it does. -If you unmounted too quickly after doing IO to a journaled file, GFS2 was crashing because you would discard a buffer whose bufdata was still on the active items list. GFS2 now deals with this gracefully. -GFS2 was losing track of the bufdata for journaled data blocks, and it wasn't getting freed, causing an error when you tried to unmount the module. GFS2 now frees all the bufdata structures. -There was a memory corruption occurring because GFS2 wrote twice as many log entries for journaled buffers. -It was occasionally trying to write journal headers in buffers that weren't currently mapped. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix deallocation issuesAbhijith Das
There were two issues during deallocation of unlinked inodes. The first was relating to the use of a "try" lock which in the case of the inode lock wasn't trying hard enough to deallocate in all circumstances (now changed to a normal glock) and in the case of the iopen lock didn't wait for the demotion of the shared lock before attempting to get the exclusive lock, and thereby sometimes (timing dependent) not completing the deallocation when it should have done. The second issue related to the lack of a way to invalidate dcache entries on remote nodes (now fixed by this patch) which meant that unlinks were taking a long time to return disk space to the fs. By adding some code to invalidate the dcache entries across the cluster for unlinked inodes, that is now fixed. This patch was written jointly by Abhijith Das and Steven Whitehouse. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] return conflicts for GETLKDavid Teigland
We weren't returning the correct result when GETLK found a conflict, which is indicated by userspace passing back a 1. Signed-off-by: Abhijith Das <adas redhat com> Signed-off-by: David Teigland <teigland redhat com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] set plock owner in GETLK infoDavid Teigland
Set the owner field in the plock info sent to userspace for GETLK. Without this, gfs_controld won't correctly see when the GETLK from a process matches one of the process's existing locks. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] gfs2_lookupi() uninitialised var fixakpm@linux-foundation.org
fs/gfs2/inode.c: In function 'gfs2_lookupi': fs/gfs2/inode.c:392: warning: 'error' may be used uninitialized in this function Looks like a real bug to me. Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Recovery for lost unlinked inodesSteven Whitehouse
Under certain circumstances its possible (though rather unlikely) that inodes which were unlinked by one node while still open on another might get "lost" in the sense that they don't get deallocated if the node which held the inode open crashed before it was unlinked. This patch adds the recovery code which allows automatic deallocation of the inode if its found during block allocation (the sensible time to look for such inodes since we are scanning the rgrp's bitmaps anyway at this time, so it adds no overhead to do this). Since the inode will have had its i_nlink set to zero, all we need to trigger recovery is a lookup and an iput(), and the normal deallocation code takes care of the rest. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Can't mount GFS2 file system on AoE deviceRobert Peterson
This patch fixes bug 243131: Can't mount GFS2 file system on AoE device. When using AoE devices with lock_nolock, there is no locking table, so gfs2 (and gfs1) uses the superblock s_id. This turns out to be the device name in some cases. In the case of AoE, the device contains a slash, (e.g. "etherd/e1.1p2") which is an invalid character when we try to register the table in sysfs. This patch replaces the "/" with underscore. Rather than add a new variable to the stack, I'm just reusing a (char *) variable that's no longer used: table. This code has been tested on the failing system using a RHEL5 patch. The upstream code was tested by using gfs2_tool sb to interject a "/" into the table name of a clustered gfs2 file system. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix bug in error path of inodeSteven Whitehouse
This fixes a bug in the ordering of operations in the error path of createi. Its not valid to do an iput() when holding the inode's glock since the iput() will (in this case) result in delete_inode() being called which needs to grab the lock itself. This was causing the recursive lock checking code to trigger. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix typo in rename of directoriesSteven Whitehouse
A typo caused us to pass a NULL pointer when renaming directories. It was accidentally introduced in: [GFS2] Clean up inode number handling Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[DLM] variable allocationPatrick Caulfield
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace. This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL. (This updated version of the patch uses gfp_t for ls_allocation.) Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-Off-By: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Add nanosecond timestamp featureSteven Whitehouse
This adds a nanosecond timestamp feature to the GFS2 filesystem. Due to the way that the on-disk format works, older filesystems will just appear to have this field set to zero. When mounted by an older version of GFS2, the filesystem will simply ignore the extra fields so that it will again appear to have whole second resolution, so that its trivially backward compatible. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix sign problem in quota/statfs and cleanup _host structuresSteven Whitehouse
This patch fixes some sign issues which were accidentally introduced into the quota & statfs code during the endianess annotation process. Also included is a general clean up which moves all of the _host structures out of gfs2_ondisk.h (where they should not have been to start with) and into the places where they are actually used (often only one place). Also those _host structures which are not required any more are removed entirely (which is the eventual plan for all of them). The conversion routines from ondisk.c are also moved into the places where they are actually used, which for almost every one, was just one single place, so all those are now static functions. This also cleans up the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__. The net result is a reduction of about 100 lines of code, many functions now marked static plus the bug fixes as mentioned above. For good measure I ran the code through sparse after making these changes to check that there are no warnings generated. This fixes Red Hat bz #239686 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] fix jdata issuesBenjamin Marzinski
This is a patch for the first three issues of RHBZ #238162 The first issue is that when you allocate a new page for a file, it will not start off uptodate. This makes sense, since you haven't written anything to that part of the file yet. Unfortunately, gfs2_pin() checks to make sure that the buffers are uptodate. The solution to this is to mark the buffers uptodate in gfs2_commit_write(), after they have been zeroed out and have the data written into them. I'm pretty confident with this fix, although it's not completely obvious that there is no problem with marking the buffers uptodate here. The second issue is simply that you can try to pin a data buffer that is already on the incore log, and thus, already pinned. This patch checks to see if this buffer is already on the log, and exits databuf_lo_add() if it is, just like buf_lo_add() does. The third issue is that gfs2_log_flush() doesn't do it's block accounting correctly. Both metadata and journaled data are logged, but gfs2_log_flush() only compares the number of metadata blocks with the number of blocks to commit to the ondisk journal. This patch also counts the journaled data blocks. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Make the log reserved blocks depend on block sizeSteven Whitehouse
The number of blocks which we reserve in the log at the start of each transaction needs to depends upon the block size since the overhead is related to the number of "pointers" which can be fitted into a single block. This relates to Red Hat bz #240435 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Quotas non-functional - fix another bugAbhijith Das
This patch fixes a bug where gfs2 was writing update quota usage information to the wrong location in the quota file. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Quotas non-functional - fix bugAbhijith Das
This patch fixes an error in the quota code where a 'struct gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a 'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Clean up inode number handlingSteven Whitehouse
This patch cleans up the inode number handling code. The main difference is that instead of looking up the inodes using a struct gfs2_inum_host we now use just the no_addr member of this structure. The tests relating to no_formal_ino can then be done by the calling code. This has advantages in that we want to do different things in different code paths if the no_formal_ino doesn't match. In the NFS patch we want to return -ESTALE, but in the ->lookup() path, its a bug in the fs if the no_formal_ino doesn't match and thus we can withdraw in this case. In order to later fix bz #201012, we need to be able to look up an inode without knowing no_formal_ino, as the only information that is known to us is the on-disk location of the inode in question. This patch will also help us to fix bz #236099 at a later date by cleaning up a lot of the code in that area. There are no user visible changes as a result of this patch and there are no changes to the on-disk format either. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Reduce size of struct gdlm_lockSteven Whitehouse
This patch removes the completion (which is rather large) from struct gdlm_lock in favour of using the wait_on_bit() functions. We don't need to add any extra fields to the structure to do this, so we save 32 bytes (on x86_64) per structure. This adds up to quite a lot when we may potentially have millions of these lock structures, Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: David Teigland <teigland@redhat.com>
2007-07-09[GFS2] Addendum patch 2 for gfs2_growRobert Peterson
This addendum patch 2 corrects three things: 1. It fixes a stupid mistake in the previous addendum that broke gfs2. Ref: https://www.redhat.com/archives/cluster-devel/2007-May/msg00162.html 2. It fixes a problem that Dave Teigland pointed out regarding the external declarations in ops_address.h being in the wrong place. 3. It recasts a couple more %llu printks to (unsigned long long) as requested by Steve Whitehouse. I would have loved to put this all in one revised patch, but there was a rush to get some patches for RHEL5. Therefore, the previous patches were applied to the git tree "as is" and therefore, I'm posting another addendum. Sorry. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] use zero_user_pageNate Diller
Use zero_user_page() instead of open-coding it. Signed-off-by: Nate Diller <nate.diller@gmail.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-09[GFS2] Kernel changes to support new gfs2_grow command (part 2)Robert Peterson
To avoid code redundancy, I separated out the operational "guts" into a new function called read_rindex_entry. Then I made two functions: the closer-to-original gfs2_ri_update (without the special condition checks) and gfs2_ri_update_special that's designed with that condition in mind. (I don't like the name, but if you have a suggestion, I'm all ears). Oh, and there's an added benefit: we don't need all the ugly gotos anymore. ;) This patch has been tested with gfs2_fsck_hellfire (which runs for three and a half hours, btw). Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] kernel changes to support new gfs2_grow commandRobert Peterson
This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] flush the glock completely in inode_go_syncBenjamin Marzinski
Fix for bz #231910 When filemap_fdatawrite() is called on the inode mapping in data=ordered mode, it will add the glock to the log. In inode_go_sync(), if you do the gfs2_log_flush() before this, after the filemap_fdatawrite() call, the glock and its associated data buffers will be on the log again. This means you can demote a lock from exclusive, without having it flushed from the log. The attached patch simply moves the gfs2_log_flush up to after the filemap_fdatawrite() call. Originally, I tried moving the gfs2_log_flush to after gfs2_meta_sync(), but that caused me to trip the following assert. GFS2: fsid=cypher-36:test.0: fatal: assertion "!buffer_busy(bh)" failed GFS2: fsid=cypher-36:test.0: function = gfs2_ail_empty_gl, file = fs/gfs2/glops.c, line = 61 It appears that gfs2_log_flush() puts some of the glocks buffers in the busy state and the filemap_fdatawrite() call is necessary to flush them. This makes me worry slightly that a related problem could happen because of moving the gfs2_log_flush() after the initial filemap_fdatawrite(), but I assume that gfs2_ail_empty_gl() would catch that case as well. Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Factor outstanding I/O error handlingGuillaume Chazarain
Cleanup: setting an outstanding error on a mapping was open coded too many times. Factor it out in mapping_set_error(). Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07Merge branch 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux: gfs2: nfs lock support for gfs2 lockd: add code to handle deferred lock requests lockd: always preallocate block in nlmsvc_lock() lockd: handle test_lock deferrals lockd: pass cookie in nlmsvc_testlock lockd: handle fl_grant callbacks lockd: save lock state on deferral locks: add fl_grant callback for asynchronous lock return nfsd4: Convert NFSv4 to new lock interface locks: add lock cancel command locks: allow {vfs,posix}_lock_file to return conflicting lock locks: factor out generic/filesystem switch from setlock code locks: factor out generic/filesystem switch from test_lock locks: give posix_test_lock same interface as ->lock locks: make ->lock release private data before returning in GETLK case locks: create posix-to-flock helper functions locks: trivial removal of unnecessary parentheses
2007-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits) [GFS2] Uncomment sprintf_symbol calling code [DLM] lowcomms style [GFS2] printk warning fixes [GFS2] Patch to fix mmap of stuffed files [GFS2] use lib/parser for parsing mount options [DLM] Lowcomms nodeid range & initialisation fixes [DLM] Fix dlm_lowcoms_stop hang [DLM] fix mode munging [GFS2] lockdump improvements [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump) [DLM] fs/dlm/ast.c should #include "ast.h" [DLM] Consolidate transport protocols [DLM] Remove redundant assignment [GFS2] Fix bz 234168 (ignoring rgrp flags) [DLM] change lkid format [DLM] interface for purge (2/2) [DLM] add orphan purging code (1/2) [DLM] split create_message function [GFS2] Set drop_count to 0 (off) by default ...
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07gfs2: nfs lock support for gfs2Marc Eshel
Add NFS lock support to GFS2. Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-06locks: give posix_test_lock same interface as ->lockMarc Eshel
posix_test_lock() and ->lock() do the same job but have gratuitously different interfaces. Modify posix_test_lock() so the two agree, simplifying some code in the process. Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-03remove "struct subsystem" as it is no longer neededGreg Kroah-Hartman
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-01[GFS2] Uncomment sprintf_symbol calling codeSteven Whitehouse
Now that the patch from -mm has gone upstream, we can uncomment the code in GFS2 which uses sprintf_symbol. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Robert Peterson <rpeterso@redhat.com>
2007-05-01[GFS2] printk warning fixesakpm@linux-foundation.org
alpha: fs/gfs2/dir.c: In function 'gfs2_dir_read_leaf': fs/gfs2/dir.c:1322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t' fs/gfs2/dir.c: In function 'gfs2_dir_read': fs/gfs2/dir.c:1455: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type '__u64' Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>