| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A pNFS client auto-negotiates a lot of features (minorversion level,
pNFS layout type, etc.). This is convenient, but makes certain kinds of
failures hard for a user to detect.
For example, if the client falls back on 4.0, or falls back to MDS IO
because the user didn't connect to the right iscsi disks before
mounting, the only symptoms may be reduced performance, which may not be
noticed till long after the actual failure, and may be difficult for a
user to diagnose.
However, such "failures" may also be perfectly normal in some cases, so
we don't want to spam the system logs with them.
One approach would be to put some more information into
/proc/self/mountstats.
Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: add commit client stats]
[fixup data types for "ret" variables in pnfs_try_to* inline funcs.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix definition of show_pnfs for !CONFIG_PNFS]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case]
There is a build error when CONFIG_NFS_V4 is set but
CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype
was unbalanced between the two cases.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfs: super.c remove CONFIG_PNFS]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
On a remount, the VFS layer will clear the MS_SYNCHRONOUS bit on the
assumption that the flags on the mount syscall will have it set if the
remounted fs is supposed to keep it.
In the case of "noac" though, MS_SYNCHRONOUS is implied. A remount of
such a mount will lose the MS_SYNCHRONOUS flag since "sync" isn't part
of the mount options.
Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We were always attempting sec flavor negotiation, even if the user
told us a specific sec flavor to use. If that sec flavor fails,
we should return an error rather than continuing with sec flavor
negotiation.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
In fs/nfs/super.c::nfs_fs_mount() we test for a NULL 'data':
...
if (data == NULL || mntfh == NULL)
goto out_free_fh;
...
and then further down in the function we test 'data' again:
...
nfs_fscache_get_super_cookie(
s, data ? data->fscache_uniq : NULL, NULL);
...
this second check is just dead code since there is no way 'data' could
possibly be NULL here.
We also rely on a non-NULL 'data' in more than one location between these
two tests, further proving the point that the second test is bogus.
This patch removes the dead code.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits)
RPC: killing RPC tasks races fixed
xprt: remove redundant check
SUNRPC: Convert struct rpc_xprt to use atomic_t counters
SUNRPC: Ensure we always run the tk_callback before tk_action
sunrpc: fix printk format warning
xprt: remove redundant null check
nfs: BKL is no longer needed, so remove the include
NFS: Fix a warning in fs/nfs/idmap.c
Cleanup: Factor out some cut-and-paste code.
cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.
NFS: account direct-io into task io accounting
gss:krb5 only include enctype numbers in gm_upcall_enctypes
RPCRDMA: Fix FRMR registration/invalidate handling.
RPCRDMA: Fix to XDR page base interpretation in marshalling logic.
NFSv4: Send unmapped uid/gids to the server when using auth_sys
NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr
NFSv4: cleanup idmapper functions to take an nfs_server argument
NFSv4: Send unmapped uid/gids to the server if the idmapper fails
NFSv4: If the server sends us a numeric uid/gid then accept it
NFSv4.1: reject zero layout with zeroed stripe unit
...
|
|
The last remaining instances of ->get_sb() can be converted ->mount()
now - nothing in them uses new vfsmount anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
now we can do that - nobody cares about its value anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
a) ->show_devname(m, mnt) - what to put into devname columns in mounts,
mountinfo and mountstats
b) ->show_path(m, mnt) - what to put into relative path column in mountinfo
Leaving those NULL gives old behaviour. NFS switched to using those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
part 3: now we have everything to get nfs_path() just by dentry -
just follow to (disconnected) root and pick the rest of the thing
there.
Start killing propagation of struct vfsmount * on the paths that
used to bring it to nfs_path().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
step 1 of ->mnt_devname fixes: make sure we have the value of devname
available in ..._get_root().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Factor out some cut-and-paste code in options parsing.
Saves about 800 bytes on x86-64.
Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Eliminate two mostly duplicate functions (nfs_parse_simple_hostname()
and nfs_parse_protected_hostname()) and instead just make the calling
function (nfs_parse_devname()) do everything.
Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch make nfsv4 use the generic xattr handling code
to get the nfsv4 acl. This will help us to add richacl
support to nfsv4 in later patches
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We want to skip VFS applying mode for NFS. So set MS_POSIXACL always
and selectively use umask. Ideally we would want to use umask only
when we don't have inheritable ACEs set. But NFS currently don't
allow to send umask to the server. So this is best what we can do
and this is consistent with NFSv3
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Update: added check for zero value as it was before (note: can't simply check
mountd_port for positive value because it's typeof unsigned short)
Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not
be changed during parsing mount options for mound data version 6. This default
value will be showed for mountport in /proc/mounts always since current default
check is for zero value. This small mistake leads to big problem, because
during umount.nfs execution from old user-space utils (at least nfs-utils
1.0.9) this value will be used as the server port to connect to. This request
will be rejected (since port is 65535) and thus nfs mount point can't be
unmounted.
Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if
/etc/mtab is a link to /proc/mounts. Not all systems have this configuration.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When nfs client(kernel) don't support NFSv4, maybe user build
kernel without NFSv4, there is a problem.
Using command "mount SERVER-IP:/nfsv3 /mnt/" to mount NFSv3
filesystem, mount should should success, but fail and get error:
"mount.nfs: an incorrect mount option was specified"
System call mount "nfs"(not "nfs4") with "vers=4",
if CONFIG_NFS_V4 is not defined, the "vers=4" will be parsed
as invalid argument and kernel return EINVAL to nfs-utils.
About that, we really want get EPROTONOSUPPORT rather than
EINVAL. This path make sure kernel parses argument success,
and return EPROTONOSUPPORT at nfs_validate_mount_data().
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Trying to mount NFS (root partition in my case) fails if CONFIG_NFS_V3
is not selected. nfs_validate_mount_data() returns EPROTONOSUPPORT,
because of this check:
#ifndef CONFIG_NFS_V3
if (args->version == 3)
goto out_v3_not_compiled;
#endif /* !CONFIG_NFS_V3 */
and args->version was always initialized to 3.
It was working in 2.6.36
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
|
|
Display the status of 'local_lock' mount option in /proc/mounts.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range
locks. Due to this, some windows applications which seem to use both flock
(share mode lock mapped as flock by Samba) and fcntl locks sequentially on
the same file, can't lock as they falsely assume the file is already locked.
The problem was reported on a setup with windows clients accessing excel files
on a Samba exported share which is originally a NFS mount from a NetApp filer.
Older NFS clients (< 2.6.12) did not see this problem as flock locks were
considered local. To support legacy flock behavior, this patch adds a mount
option "-olocal_lock=" which can take the following values:
'none' - Neither flock locks nor POSIX locks are local
'flock' - flock locks are local
'posix' - fcntl/POSIX locks are local
'all' - Both flock locks and POSIX locks are local
Testing:
- This patch was tested by using -olocal_lock option with different values
and the NLM calls were noted from the network packet captured.
'none' - NLM calls were seen during both flock() and fcntl(), flock lock
was granted, fcntl was denied
'flock' - no NLM calls for flock(), NLM call was seen for fcntl(),
granted
'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl()
'all' - no NLM calls were seen during both flock() and fcntl()
- No bugs were seen during NFSv4 locking/unlocking in general and NFSv4
reboot recovery.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Hi,
An NFS client executes a statfs("file", &buff) call.
"file" exists / existed, the client has read / written it,
but it has already closed it.
user_path(pathname, &path) looks up "file" successfully in the
directory-cache and restarts the aging timer of the directory-entry.
Even if "file" has already been removed from the server, because the
lookupcache=positive option I use, keeps the entries valid for a while.
nfs_statfs() returns ESTALE if "file" has already been removed from the
server.
If the user application repeats the statfs("file", &buff) call, we
are stuck: "file" remains young forever in the directory-cache.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
|
|
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix an Oops in the NFSv4 atomic open code
NFS: Fix the selection of security flavours in Kconfig
NFS: fix the return value of nfs_file_fsync()
rpcrdma: Fix SQ size calculation when memreg is FRMR
xprtrdma: Do not truncate iova_start values in frmr registrations.
nfs: Remove redundant NULL check upon kfree()
nfs: Add "lookupcache" to displayed mount options
NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)
|
|
Running "cat /proc/mounts" fails to display the "lookupcache" option.
This oversight cost me a bunch of wasted time recently.
The following simple patch fixes it.
CC: stable <stable@kernel.org>
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a flag so we know if we mounted the NFS server using the legacy
binary interface. If we used the legacy interface, then we should not
show the mountd options.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently, we do not display the minor version mount parameter in the
/proc mount info.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
|
|
SHRT_MAX and SHRT_MIN
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.
- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up: fscache_uniq takes a string, so it should be included
with the other string mount option definitions, by convention.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Use the new helper functions instead of open coding.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Keep a global count of how many referrals that the current task has
traversed on a path lookup. Return ELOOP if the count exceeds
MAX_NESTED_LINKS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
With CONFIG_NFS_V4 and data version 4, nfs_get_sb will allocate memory for
export_path in nfs4_validate_text_mount_data, so we need to free it then.
This is addressed in following kmemleak report:
unreferenced object 0xffff88016bf48a50 (size 16):
comm "mount.nfs", pid 22567, jiffies 4651574704 (age 175471.200s)
hex dump (first 16 bytes):
2f 6f 70 74 2f 77 6f 72 6b 00 6b 6b 6b 6b 6b a5 /opt/work.kkkkk.
backtrace:
[<ffffffff814b34f9>] kmemleak_alloc+0x60/0xa7
[<ffffffff81102c76>] kmemleak_alloc_recursive.clone.5+0x1b/0x1d
[<ffffffff811046b3>] __kmalloc_track_caller+0x18f/0x1b7
[<ffffffff810e1b08>] kstrndup+0x37/0x54
[<ffffffffa0336971>] nfs_parse_devname+0x152/0x204 [nfs]
[<ffffffffa0336af3>] nfs4_validate_text_mount_data+0xd0/0xdc [nfs]
[<ffffffffa0338deb>] nfs_get_sb+0x325/0x736 [nfs]
[<ffffffff81113671>] vfs_kern_mount+0xbd/0x17c
[<ffffffff81113798>] do_kern_mount+0x4d/0xed
[<ffffffff81129a87>] do_mount+0x787/0x7fe
[<ffffffff81129b86>] sys_mount+0x88/0xc2
[<ffffffff81009b42>] system_call_fastpath+0x16/0x1b
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs_path() returns an ERR_PTR(), it doesn't return null.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
bdi_unregister is called by nfs_put_super which is only called by
generic_shutdown_super if ->s_root is not NULL. So if we error out
in a circumstance where we called nfs_bdi_register (i.e. server !=
NULL) but have not set s_root, then we need to call bdi_unregister
explicitly in nfs_get_sb and various other *_get_sb() functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Ensure that we unregister the bdi before kill_anon_super() calls
ida_remove() on our device name.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
|
|
This reverts commit e9496ff46a20a8592fdc7bdaaf41b45eb808d310. Quoth Al:
"it's dependent on a lot of other stuff not currently in mainline
and badly broken with current fs/namespace.c. Sorry, badly
out-of-order cherry-pick from old queue.
PS: there's a large pending series reworking the refcounting and
lifetime rules for vfsmounts that will, among other things, allow to
rip a subtree away _without_ dissolving connections in it, to be
garbage-collected when all active references are gone. It's
considerably saner wrt "is the subtree busy" logics, but it's nowhere
near being ready for merge at the moment; this changeset is one of the
things becoming possible with that sucker, but it certainly shouldn't
have been picked during this cycle. My apologies..."
Noticed-by: Eric Paris <eparis@redhat.com>
Requested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When the "rsize=" or "wsize=" mount options are not specified,
text-based mounts have slightly different behavior than legacy binary
mounts. Text-based mounts use the smaller of the server's maximum
and the client's maximum, but binary mounts use the smaller of the
server's _preferred_ size and the client's maximum.
This difference is actually pretty subtle. Most servers advertise
the same value as their maximum and their preferred transfer size, so
the end result is the same in most cases.
The reason for this difference is that for text-based mounts, if
r/wsize are not specified, they are set to the largest value supported
by the client. For legacy mounts, the values are set to zero if these
options are not specified.
nfs_server_set_fsinfo() can negotiate the transfer size defaults
correctly in any case. There's no need to specify any particular
value as default in the text-based option parsing logic.
Note that nfs4 doesn't use nfs_server_set_fsinfo(), but the mount.nfs4
command does set rsize and wsize to 0 if the user didn't specify these
options. So, make the same change for text-based NFSv4 mounts.
Thanks to James Pearson <james-p@moving-picture.com> for reporting and
diagnosing the problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Recent changes to snprintf() introduced the %pI6c formatter, which can
display an IPv6 address with standard shorthanding. Use this new
formatter when displaying IPv6 server addresses in /proc/mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Solaris uses netids as values for the proto= option, so that when
someone specifies "tcp6" they get traffic over TCP + IPv6. Until
recently, this has never really been an issue for Linux since it didn't
support NFS over IPv6. The netid and the protocol name were generally
always the same (modulo any strange configuration in /etc/netconfig).
The solaris manpage documents their proto= option as:
proto= _netid_ | rdma
This patch is intended to bring Linux closer to how the Solaris proto=
option works, by declaring a static netid mapping in the kernel and
converting the proto= and mountproto= options to follow it and display
the proper values in /proc/mounts.
Much of this functionality will need to be provided by a userspace
mount.nfs patch. Chuck Lever has a patch to change mount.nfs in
the same way. In principle, we could do *all* of this in userspace but
that would mean that the options in /proc/mounts may not match the
options used by userspace.
The alternative to the static mapping here is to add a mechanism to
upcall to userspace for netid's. I'm not opposed to that option, but
it'll probably mean more overhead (and quite a bit more code). Rather
than shoot for that at first, I figured it was probably better to
start simply.
Comments welcome.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
None of the code in nfs_umount_begin() or nfs_remount() has any BKL
dependency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix a (small) memory leak in one of the error paths of the NFS mount
options parsing code.
Regression introduced in 2.6.30 by commit a67d18f (NFS: load the
rpc/rdma transport module automatically).
Reported-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
