summaryrefslogtreecommitdiff
path: root/fs/nilfs2/mdt.c
AgeCommit message (Collapse)Author
2012-03-20nilfs2: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-05-10nilfs2: use mark_buffer_dirty to mark btnode or meta data dirtyRyusuke Konishi
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty, an own mark buffer dirty function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: always set back pointer to host inode in mapping->hostRyusuke Konishi
In the current nilfs, page cache for btree nodes and meta data files do not set a valid back pointer to the host inode in mapping->host. This will change it so that every address space in nilfs uses mapping->host to hold its host inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-10Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe
Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-24mm: prevent concurrent unmap_mapping_range() on the same inodeMiklos Szeredi
Michael Leun reported that running parallel opens on a fuse filesystem can trigger a "kernel BUG at mm/truncate.c:475" Gurudas Pai reported the same bug on NFS. The reason is, unmap_mapping_range() is not prepared for more than one concurrent invocation per inode. For example: thread1: going through a big range, stops in the middle of a vma and stores the restart address in vm_truncate_count. thread2: comes in with a small (e.g. single page) unmap request on the same vma, somewhere before restart_address, finds that the vma was already unmapped up to the restart address and happily returns without doing anything. Another scenario would be two big unmap requests, both having to restart the unmapping and each one setting vm_truncate_count to its own value. This could go on forever without any of them being able to finish. Truncate and hole punching already serialize with i_mutex. Other callers of unmap_mapping_range() do not, and it's difficult to get i_mutex protection for all callers. In particular ->d_revalidate(), which calls invalidate_inode_pages2_range() in fuse, may be called with or without i_mutex. This patch adds a new mutex to 'struct address_space' to prevent running multiple concurrent unmap_mapping_range() on the same mapping. [ We'll hopefully get rid of all this with the upcoming mm preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex lockbreak" patch in particular. But that is for 2.6.39 ] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Michael Leun <lkml20101129@newton.leun.net> Reported-by: Gurudas Pai <gurudas.pai@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10nilfs2: simplify nilfs_mdt_freeze_bufferRyusuke Konishi
nilfs_page_get_nth_block() function used in nilfs_mdt_freeze_buffer() always returns a valid buffer head, so its validity check can be removed. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: call nilfs_error inside bmap routinesRyusuke Konishi
Some functions using nilfs bmap routines can wrongly return invalid argument error (i.e. -EINVAL) that bmap returns as an internal code for btree corruption. This fixes the issue by catching and converting the internal EINVAL to EIO and calling nilfs_error function inside bmap routines. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of bdi from nilfs objectRyusuke Konishi
Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it instead of ns_bdi on the nilfs object and remove ns_bdi. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: remove own inode allocator and destructor for metadata filesRyusuke Konishi
This finally removes own inode allocator and destructor functions for metadata files. Several routines, nilfs_mdt_new(), nilfs_mdt_new_common(), nilfs_mdt_clear(), nilfs_mdt_destroy(), and nilfs_alloc_inode_common() will be gone. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of back pointer to writable sb instanceRyusuke Konishi
Nilfs object holds a back pointer to a writable super block instance in nilfs->ns_writer, and this became eliminable since sb is now made per device and all inodes have a valid pointer to it. This deletes the ns_writer pointer and a reader/writer semaphore protecting it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of mi_nilfs back pointer to nilfs objectRyusuke Konishi
This removes a back pointer to nilfs object from nilfs_mdt_info structure that is attached to metadata files. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use iget for all metadata filesRyusuke Konishi
This makes use of iget5_locked to allocate or get inode for metadata files to stop using own inode allocator. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of GCDAT inodeRyusuke Konishi
This applies prepared rollback function and redirect function of metadata file to DAT file, and eliminates GCDAT inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: add routines to redirect access to buffers of DAT fileRyusuke Konishi
During garbage collection (GC), DAT file, which converts virtual block number to real block number, may return disk block number that is not yet written to the device. To avoid access to unwritten blocks, the current implementation stores changes to the caches of GCDAT during GC and atomically commit the changes into the DAT file after they are written to the device. This patch, instead, adds a function that makes a copy of specified buffer and stores it in nilfs_shadow_map, and a function to get the backup copy as needed (nilfs_mdt_freeze_buffer and nilfs_mdt_get_frozen_buffer respectively). Before DAT changes block number in an entry block, it makes a copy and redirect access to the buffer so that address conversion function (i.e. nilfs_dat_translate) refers to the old address saved in the copy. This patch gives requisites for such redirection. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: add routines to roll back state of DAT fileRyusuke Konishi
This adds optional function to metadata files which makes a copy of bmap, page caches, and b-tree node cache, and rolls back to the copy as needed. This enhancement is intended to displace gcdat inode that provides a similar function in a different way. In this patch, nilfs_shadow_map structure is added to store a copy of the foregoing states. nilfs_mdt_setup_shadow_map relates this structure to a metadata file. And, nilfs_mdt_save_to_shadow_map() and nilfs_mdt_restore_from_shadow_map() provides save and restore functions respectively. Finally, nilfs_mdt_clear_shadow_map() clears states of nilfs_shadow_map. The copy of b-tree node cache and page cache is made by duplicating only dirty pages into corresponding caches in nilfs_shadow_map. Their restoration is done by clearing dirty pages from original caches and by copying dirty pages back from nilfs_shadow_map. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: separate initializer of metadata file inodeRyusuke Konishi
This separates a part of initialization code of metadata file inode, and makes it available from the nilfs iget function that a later patch will add to. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: allow nilfs_destroy_inode to destroy metadata file inodesRyusuke Konishi
The current nilfs_destroy_inode() doesn't handle metadata file inodes including gc inodes (dummy inodes used for garbage collection). This allows nilfs_destroy_inode() to destroy inodes of metadata files. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: get rid of nilfs_bmap_unionRyusuke Konishi
This removes nilfs_bmap_union and finally unifies three structures and the union in bmap/btree code into one. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-11-20nilfs2: add cache framework for persistent object allocatorRyusuke Konishi
This adds setup and cleanup routines of the persistent object allocator cache. According to ftrace analyses, accessing buffers of the DAT file suffers indispensable overhead many times. To mitigate the overhead, This introduce cache framework for the persistent object allocator (palloc) which the DAT file and ifile are using. struct nilfs_palloc_cache represents the cache object per metadata file using palloc. The cache is initialized through nilfs_palloc_setup_cache() and destroyed by nilfs_palloc_destroy_cache(); callers of the former function will be added to individual allocators of DAT and ifile on successive patches. nilfs_palloc_destroy_cache() will be called from nilfs_mdt_destroy() if the cache is attached to a metadata file. A companion function nilfs_palloc_clear_cache() is provided to allow releasing buffer head references independently with the cleanup task. This adjunctive function will be used before invalidating pages of metadata file with the cache. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: avoid readahead on metadata file for create modeRyusuke Konishi
This turns off readhead action of metadata file if nilfs_mdt_get_block function was called with a create flag. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: hide nilfs_mdt_clear calls in nilfs_mdt_destroyRyusuke Konishi
This will hide a function call of nilfs_mdt_clear() in nilfs_mdt_destroy(). This ensures nilfs_mdt_destroy() to do cleanup jobs included in nilfs_mdt_clear(). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: add size option of private object to metadata file allocatorRyusuke Konishi
This adds an optional "object size" argument to nilfs_mdt_new_common() function; the argument specifies the size of private object attached to a newly allocated metadata file inode. This will afford space to keep local variables for meta data files. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22const: mark remaining inode_operations as constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22const: mark remaining address_space_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-14nilfs2: convert nilfs_bmap_lookup to an inline functionRyusuke Konishi
The nilfs_bmap_lookup() is now a wrapper function of nilfs_bmap_lookup_at_level(). This moves the nilfs_bmap_lookup() to a header file converting it to an inline function and gives an opportunity for optimization. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: remove individual gfp constants for each metadata fileRyusuke Konishi
This gets rid of NILFS_CPFILE_GFP, NILFS_SUFILE_GFP, NILFS_DAT_GFP, and NILFS_IFILE_GFP. All of these constants refer to NILFS_MDT_GFP, and can be removed. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: always lookup disk block address before reading metadata blockRyusuke Konishi
The current metadata file code skips disk address lookup for its data block if the buffer has a mapped flag. This has a potential risk to cause read request to be performed against the stale block address that GC moved, and it may lead to meta data corruption. The mapped flag is safe if the buffer has an uptodate flag, otherwise it may prevent necessary update of disk address in the next read. This will avoid the potential problem by ensuring disk address lookup before reading metadata block even for buffers with the mapped flag. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: use semaphore to protect pointer to a writable FS-instanceRyusuke Konishi
will get rid of nilfs_get_writer() and nilfs_put_writer() pair used to retain a writable FS-instance for a period. The pair functions were making up some kind of recursive lock with a mutex, but they became overkill since the commit 201913ed746c7724a40d33ee5a0b6a1fd2ef3193. Furthermore, they caused the following lockdep warning because the mutex can be released by a task which didn't lock it: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- kswapd0/422 is trying to release lock (&nilfs->ns_writer_mutex) at: [<c1359ff5>] mutex_unlock+0x8/0xa but there are no more locks to release! other info that might help us debug this: no locks held by kswapd0/422. stack backtrace: Pid: 422, comm: kswapd0 Not tainted 2.6.31-rc4-nilfs #51 Call Trace: [<c1358f97>] ? printk+0xf/0x18 [<c104fea7>] print_unlock_inbalance_bug+0xcc/0xd7 [<c11578de>] ? prop_put_global+0x3/0x35 [<c1050195>] lock_release+0xed/0x1dc [<c1359ff5>] ? mutex_unlock+0x8/0xa [<c1359f83>] __mutex_unlock_slowpath+0xaf/0x119 [<c1359ff5>] mutex_unlock+0x8/0xa [<d1284add>] nilfs_mdt_write_page+0xd8/0xe1 [nilfs2] [<c1092653>] shrink_page_list+0x379/0x68d [<c109171b>] ? isolate_pages_global+0xb4/0x18c [<c1092bd2>] shrink_list+0x26b/0x54b [<c10930be>] shrink_zone+0x20c/0x2a2 [<c10936b7>] kswapd+0x407/0x591 [<c1091667>] ? isolate_pages_global+0x0/0x18c [<c1040603>] ? autoremove_wake_function+0x0/0x33 [<c10932b0>] ? kswapd+0x0/0x591 [<c104033b>] kthread+0x69/0x6e [<c10402d2>] ? kthread+0x0/0x6e [<c1003e33>] kernel_thread_helper+0x7/0x1a This patch uses a reader/writer semaphore instead of the own lock and kills this warning. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-08-02nilfs2: fix missing unlock in error path of nilfs_mdt_write_pageRyusuke Konishi
This adds a missing unlock of nilfs->ns_writer_mutex in nilfs_mdt_write_page() function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: add sync_page method to page caches of meta dataRyusuke Konishi
This applies block_sync_page() function to the sync_page method of page caches for meta data files, gc page caches, and btree node buffers. This is a companion patch of ("nilfs2: enable sync_page mothod") which applied the function for data pages. This allows lock_page() for those meta data to unplug pending bio requests. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: use device's backing_dev_info for btree node cachesRyusuke Konishi
Previously, default_backing_dev_info was used for the mapping of btree node caches. This uses device dependent backing_dev_info to allow detailed control of the device for the btree node pages. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-10nilfs2: ensure to clear dirty state when deleting metadata file blockRyusuke Konishi
This would fix the following failure during GC: nilfs_cpfile_delete_checkpoints: cannot delete block NILFS: GC failed during preparation: cannot delete checkpoints: err=-2 The problem was caused by a break in state consistency between page cache and btree; the above block was removed from the btree but the page buffering the block was remaining in the page cache in dirty state. This resolves the inconsistency by ensuring to clear dirty state of the page buffering the deleted block. Reported-by: David Arendt <admin@prnet.org> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-09nilfs2: fix circular locking dependency of writer mutexRyusuke Konishi
This fixes the following circular locking dependency problem: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3 #5 ------------------------------------------------------- segctord/3895 is trying to acquire lock: (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>] nilfs_mdt_get_block+0x89/0x20f [nilfs2] but task is already holding lock: (&bmap->b_sem){++++..}, at: [<d0d02d99>] nilfs_bmap_propagate+0x14/0x2e [nilfs2] which lock already depends on the new lock. The bugfix is done by replacing call sites of nilfs_get_writer() which are never called from read-only context with direct dereferencing of pointer to a writable FS-instance. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-07nilfs2: replace BUG_ON and BUG calls triggerable from ioctlRyusuke Konishi
Pekka Enberg advised me: > It would be nice if BUG(), BUG_ON(), and panic() calls would be > converted to proper error handling using WARN_ON() calls. The BUG() > call in nilfs_cpfile_delete_checkpoints(), for example, looks to be > triggerable from user-space via the ioctl() system call. This will follow the comment and keep them to a minimum. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07nilfs2: avoid double error caused by nilfs_transaction_endRyusuke Konishi
Pekka Enberg pointed out that double error handlings found after nilfs_transaction_end() can be avoided by separating abort operation: OK, I don't understand this. The only way nilfs_transaction_end() can fail is if we have NILFS_TI_SYNC set and we fail to construct the segment. But why do we want to construct a segment if we don't commit? I guess what I'm asking is why don't we have a separate nilfs_transaction_abort() function that can't fail for the erroneous case to avoid this double error value tracking thing? This does the separation and renames nilfs_transaction_end() to nilfs_transaction_commit() for clarification. Since, some calls of these functions were used just for exclusion control against the segment constructor, they are replaced with semaphore operations. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07nilfs2: meta data fileRyusuke Konishi
This adds the meta data file, which serves common buffer functions to the DAT, sufile, cpfile, ifile, and so forth. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>