summaryrefslogtreecommitdiff
path: root/fs/xfs/xfs_dinode.h
AgeCommit message (Collapse)Author
2010-10-18xfs: Extend project quotas to support 32bit project idsArkadiusz Mi?kiewicz
This patch adds support for 32bit project quota identifiers. On disk format is backward compatible with 16bit projid numbers. projid on disk is now kept in two 16bit values - di_projid_lo (which holds the same position as old 16bit projid value) and new di_projid_hi (takes existing padding) and converts from/to 32bit value on the fly. xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used to enable PROJID32BIT support. Signed-off-by: Arkadiusz Miƛkiewicz <arekm@maven.pl> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-03-29xfs: remove m_litinoChristoph Hellwig
With the upcoming v3 inodes the inode data/attr area size needs to be calculated for each specific inode, so we can't cache it in the superblock anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2008-12-01[XFS] kill XFS_DINODE_VERSION_ definesChristoph Hellwig
These names don't add any value at all over just using the numerical values. (First sent on October 9th) Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01[XFS] kill xfs_dinode_core_tChristoph Hellwig
Now that we have a separate xfs_icdinode_t for the in-core inode which gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core split - the fact that part of the structure gets logged through the inode log item and a small part not can better be described in a comment. All sizeof operations on the dinode_core either really wanted the icdinode and are switched to that one, or had already added the size of the agi unlinked list pointer. Later both will be replaced with helpers once we get the larger CRC-enabled dinode. Removing the data and attribute fork unions also has the advantage that xfs_dinode.h doesn't need to pull in every header under the sun. While we're at it also add some more comments describing the dinode structure. (First sent on October 7th) Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01[XFS] kill xfs_ialloc_log_diChristoph Hellwig
xfs_ialloc_log_di is only used to log the full inode core + di_next_unlinked. That means all the offset magic is not nessecary and we can simply use xfs_trans_log_buf directly. Also add a comment describing what we should do here instead. (First sent on October 7th) Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-10-30[XFS] Always use struct xfs_btree_block instead of short / longformChristoph Hellwig
structures. Always use the generic xfs_btree_block type instead of the short / long structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for the length of a short / long form block. The rationale for this is that we will grow more btree block header variants to support CRCs and other RAS information, and always accessing them through the same datatype with unions for the short / long form pointers makes implementing this much easier. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32300a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Cleanup maxrecs calculation.Christoph Hellwig
Clean up the way the maximum and minimum records for the btree blocks are calculated. For the alloc and inobt btrees all the values are pre-calculated in xfs_mount_common, and we switch the current loop around the ugly generic macros that use cpp token pasting to generate type names to two small helpers in normal C code. For the bmbt and bmdr trees these helpers also exist, but can be called during runtime, too. Here we also kill various macros dealing with them and inline the logic into the get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c. Note that all these new helpers take an xfs_mount * argument which will be needed to determine the size of a btree block once we add support for extended btree blocks with CRCs and other RAS information. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32292a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.Christoph Hellwig
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an xfs_dinode that embedds a xfs_dinode_core one will have to do endian swapping while the other doesn't. Instead of having the current mess with the CFORK macros that have byteswapping and non-byteswapping version (which are inconsistantly named while we're at it) just define each family of the macros to stand by itself and simplify the whole matter. A few direct references to the CFORK variants were cleaned up to use IFORK or DFORK to make this possible. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30163a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] optimize XFS_IS_REALTIME_INODE w/o realtime configEric Sandeen
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if CONFIG_XFS_RT is off. This should be safe because mount checks in xfs_rtmount_init: so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be encountered after that. Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space, presumeably gcc can optimize around the various "if (0)" type checks: xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8 xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8 <-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4 xfs_qm_vop_chown_reserve -4 SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30014a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2007-10-15[XFS] dinode endianess annotationsChristoph Hellwig
Biggest bit is duplicating the dinode structure so we have one annotated for native endianess and one for disk endianess. The other significant change is that xfs_xlate_dinode_core is split into one helper per direction to allow for proper annotations, everything else is trivial. As a sidenode splitting out the incore dinode means we can move it into xfs_inode.h in a later patch and severely improving on the include hell in xfs. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29476a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Concurrent Multi-File Data StreamsDavid Chinner
In media spaces, video is often stored in a frame-per-file format. When dealing with uncompressed realtime HD video streams in this format, it is crucial that files do not get fragmented and that multiple files a placed contiguously on disk. When multiple streams are being ingested and played out at the same time, it is critical that the filesystem does not cross the streams and interleave them together as this creates seek and readahead cache miss latency and prevents both ingest and playout from meeting frame rate targets. This patch set creates a "stream of files" concept into the allocator to place all the data from a single stream contiguously on disk so that RAID array readahead can be used effectively. Each additional stream gets placed in different allocation groups within the filesystem, thereby ensuring that we don't cross any streams. When an AG fills up, we select a new AG for the stream that is not in use. The core of the functionality is the stream tracking - each inode that we create in a directory needs to be associated with the directories' stream. Hence every time we create a file, we look up the directories' stream object and associate the new file with that object. Once we have a stream object for a file, we use the AG that the stream object point to for allocations. If we can't allocate in that AG (e.g. it is full) we move the entire stream to another AG. Other inodes in the same stream are moved to the new AG on their next allocation (i.e. lazy update). Stream objects are kept in a cache and hold a reference on the inode. Hence the inode cannot be reclaimed while there is an outstanding stream reference. This means that on unlink we need to remove the stream association and we also need to flush all the associations on certain events that want to reclaim all unreferenced inodes (e.g. filesystem freeze). SGI-PV: 964469 SGI-Modid: xfs-linux-melb:xfs-kern:29096a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2006-06-20[XFS] Remove version 1 directory code. Never functioned on Linux, justNathan Scott
pure bloat. SGI-PV: 952969 SGI-Modid: xfs-linux-melb:xfs-kern:26251a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09[XFS] Add degframentation exclusion supportBarry Naujok
SGI-PV: 953061 SGI-Modid: xfs-linux-melb:xfs-kern:25986a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11[XFS] Sort out cosmetic differences between user and kernel copies of someNathan Scott
sources. SGI-PV: 907752 SGI-Modid: xfs-linux-melb:xfs-kern:24659a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11[XFS] Implement the di_extsize allocator hint for non-realtime files asNathan Scott
well. Also provides a mechanism for inheriting this property from the parent directory for new files. SGI-PV: 945264 SGI-Modid: xfs-linux-melb:xfs-kern:24367a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02[XFS] Update license/copyright notices to match the prefered SGINathan Scott
boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.Nathan Scott
SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!