| Age | Commit message (Collapse) | Author |
|---|
|
While we're allocating ram for a new transaction, we drop our spinlock.
When we get the lock back, we do check to see if a transaction started
while we slept, but we don't check to make sure it isn't blocked
because a commit has already started.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
In case we were able to map less than we wanted (length < PAGE_SIZE
clause is true) btrfs_bio is still allocated and we have to free it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
If we don't stop them, they linger around corrupting
memory by using pointers to freed things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The scrub readahead branch brought in a new error handling hook,
but it was leaking extent_buffer references.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The new ioctls to follow backrefs are not clean for 32/64 bit
compat. This reworks them for u64s everywhere. They are brand new, so
there are no problems with changing the interface now.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Conflicts:
fs/btrfs/Makefile
fs/btrfs/extent_io.c
fs/btrfs/extent_io.h
fs/btrfs/scrub.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Conflicts:
fs/btrfs/ctree.h
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
We all keep getting those stupid warnings from use_block_rsv when running
stress.sh, and it's because the delayed insertion stuff is being stupid. It's
not the delayed insertion stuffs fault, it's all just stupid. When marking an
inode dirty for oh say updating the time on it, we just do a
btrfs_join_transaction, which doesn't reserve any space. This is stupid because
we're going to have to have space reserve to make this change, but we do it
because it's fast because chances are we're going to call it over and over again
and it doesn't matter. Well thanks to the delayed insertion stuff this is
mostly the case, so we do actually need to make this reservation. So if
trans->bytes_reserved is 0 then try to do a normal reservation. If not return
ENOSPC which will make the btrfs_dirty_inode start a proper transaction which
will let it do the whole ENOSPC dance and reserve enough space for the delayed
insertion to steal the reservation from the transaction.
The other stupid thing we do is not reserve space for the inode when writing to
the thing. Usually this is ok since we have to update the time so we'd have
already done all this work before we get to the endio stuff, so it doesn't
matter. But this is stupid because we could write the data after the
transaction commits where we changed the mtime of the inode so we have to cow
all the way down to the inode anyway. This used to be masked by the delalloc
reservation stuff, but because we delay the update it doesn't get masked in this
case. So again the delayed insertion stuff bites us in the ass. So if our
trans->block_rsv is delalloc, just steal the reservation from the delalloc
reserve. Hopefully this won't bite us in the ass, but I've said that before.
With this patch stress.sh no longer spits out those stupid warnings (famous last
words). Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Failure testing was tripping up over stale PageError bits in
metadata pages. If we have an io error on a block, and later on
end up reusing it, nobody ever clears PageError on those pages.
During commit, we'll find PageError and think we had trouble writing
the block, which will lead to aborts and other problems.
This changes clean_tree_block and the btrfs writepage code to
clear the PageError bit. In both cases we're either completely
done with the page or the page has good stuff and the error bit
is no longer valid.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Because of the overcommit stuff I had to make it so that we committed the
transaction all the time in reserve_metadata_bytes in case we had overcommitted
because of delayed items. This was because previously we had no way of knowing
how much space was reserved for delayed items. Now that we have the
delayed_block_rsv we can check it to see if committing the transaction would get
us anywhere. This patch breaks out the committing logic into a helper function
that will check to see if committing the transaction would free enough space for
us to get anything done. With this patch xfstests 83 goes from taking 445
seconds to taking 28 seconds on my box. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
I've been hitting warnings in use_block_rsv when running the delayed insertion
stuff. It's because we will readjust global block rsv based on what is in use,
which means we could end up discarding reservations that are for the delayed
insertion stuff. So instead create a seperate block rsv for the delayed
insertion stuff. This will also make it easier to debug problems with the
delayed insertion reservations since we will know that only the delayed
insertion code touches this block_rsv. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This takes some of the free space in the btrfs super block
to record information about most of the roots in the last four
commits.
It also adds a -o recovery to use the root history log when
we're not able to read the tree of tree roots, the extent
tree root, the device tree root or the csum root.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
fs_info has now ~9kb, more than fits into one page. This will cause
mount failure when memory is too fragmented. Top space consumers are
super block structures super_copy and super_for_commit, ~2.8kb each.
Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64)
Add a wrapper for freeing fs_info and all of it's dynamically allocated
members.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
We no longer use the orphan block rsv for holding the reservation for truncating
the inode, so instead use the global block rsv and check to make sure it has
enough space for us to truncate the space. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
I fixed a problem where we weren't reserving space for an orphan item when we
had to fallback to using the global reserve for an unlink, but I introduced
another problem. I was migrating the bytes from the transaction reserve to the
global reserve and then releasing from the global reserve in
btrfs_end_transaction(). The problem with this is that a migrate will jack up
the size for the destination, but leave the size alone for the source, with the
idea that you can do a release normally on the source and it all washes out, and
then you can do a release again on the destination and it works out right. My
way was skipping the release on the trans_block_rsv which still had the jacked
up size from our original reservation. So instead release manually from the
global reserve if this transaction was using it, and then set the
trans->block_rsv back to the trans_block_rsv so that btrfs_end_transaction
cleans everything up properly. With this patch xfstest 83 doesn't emit warnings
about leaking space. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
write_cache_pages tries to build up a large bio to stuff down the pipe.
But if it needs to wait for a page lock, it needs to make sure and send
down any pending writes so we don't deadlock with anyone who has the
page lock and is waiting for writeback of things inside the bio.
Dave Sterba triggered this as a deadlock between the autodefrag code and
the extent write_cache_pages
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The tree log had two important bugs that could cause corruptions after a
crash. Sometimes we were allowing tree log blocks to be reused after
the tree log was committed but before the transaction commit was done.
This allowed a future metadata write to overwrite the tree log data. It
is fixed by adding a new variant of freeing reserved extents that always
pins them. Credit goes to Stefan Behrens and Arne Jansen for many many
hours spent tracking this bug down.
During tree log replay, we do a pass through the tree log and pin all
the extents we find. This makes sure the replay code won't go in and
use any of those blocks for new allocations during replay. The problem
is the free space cache isn't honoring these pinned extents. So the
allocator can end up handing them out, leading to all kinds of problems
during replay.
The fix here is to force any free space cache to load while we pin the
extents, and then to make sure we remove the pinned extents from the
free space rbtree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Stefan Behrens <sbehrens@giantdisaster.de>
|
|
btrfs_remove_free_space needs to make sure to set ret back to a
valid return value after setting it to EAGAIN, otherwise we return
it to the callers.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
When we're doing log commits, we try to wait for more writers to come in
and make the commit bigger. This helps improve performance on rotating
disks, but on SSDs it adds latencies.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The WARN_ON under some circumstances heavily polute log and slow down
the machine. This is just a safety, as the warning should be fixed by
another patch, nevertheless, it still pops up during testing.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
|
|
|
|
There's a missing test whether the path passed to subvol=path option
during mount is a real subvolume, allowing any directory located in
default subovlume to be passed and accepted for mount.
(current btrfs progs prevent this early)
$ btrfs subvol snapshot . p1-snap
ERROR: '.' is not a subvolume
(with "is subvolume?" test bypassed)
$ btrfs subvol snapshot . p1-snap
Create a snapshot of '.' in './p1-snap'
$ btrfs subvol list -p .
ID 258 parent 5 top level 5 path subvol
ID 259 parent 5 top level 5 path subvol1
ID 260 parent 5 top level 5 path default-subvol1
ID 262 parent 5 top level 5 path p1/p1-snapshot
ID 263 parent 259 top level 5 path subvol1/subvol1-snap
The problem I see is that this makes a false impression of snapshotting the
given subvolume but in fact snapshots the default one: a user expects outcome
like ID 263 but in fact gets ID 262 .
This patch makes mount fail with EINVAL with a message in syslog.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
Fix a bug introduced by 20b45077. We have to return EINVAL on mount
failure, but doing that too early in the sequence leaves all of the
devices opened exclusively. This also fixes an issue where under some
scenarios only a second mount -o degraded <devices> command would
succeed.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Initialize fs_info->bdev_holder a bit earlier to be able to pass a
correct holder id to blkdev_get() when opening seed devices with O_EXCL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
If lookup_extent_backref fails, path->nodes[0] reasonably could be
null along with other callers of btrfs_print_leaf, so ensure we have a
valid extent buffer before dereferencing.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
|
|
The task may fail to get free space though it is enough when multi-task
space allocation and caching space happen at the same time.
Task1 Caching Thread Task2
------------------------------------------------------------------------
find_free_extent
The space has not
be cached, and start
caching thread. And
wait for it.
cache space, if
the space is > 2MB
wake up Task1
find_free_extent
get all the space that
is cached.
try to allocate space,
but there is no space
now.
trigger BUG_ON()
The message is following:
btrfs allocation failed flags 1, wanted 4096
space_info has 1040187392 free, is not full
space_info total=1082130432, used=4096, pinned=41938944, reserved=0, may_use=40828928, readonly=0
block group 12582912 has 8388608 bytes, 0 used 8388608 pinned 0 reserved
block group has cluster?: no
0 blocks of free space at or bigger than bytes is
block group 1103101952 has 1073741824 bytes, 4096 used 33550336 pinned 0 reserved
block group has cluster?: no
0 blocks of free space at or bigger than bytes is
------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:835!
[<ffffffffa031261b>] __extent_writepage+0x1bf/0x5ce [btrfs]
[<ffffffff810cbcb8>] ? __set_page_dirty_nobuffers+0xfe/0x108
[<ffffffffa02f8ada>] ? wait_current_trans+0x23/0xec [btrfs]
[<ffffffff810c3fbf>] ? find_get_pages_tag+0x73/0xe2
[<ffffffffa0312d12>] extent_write_cache_pages.clone.0+0x176/0x29a [btrfs]
[<ffffffffa0312e74>] extent_writepages+0x3e/0x53 [btrfs]
[<ffffffff8110ad2c>] ? do_sync_write+0xc6/0x103
[<ffffffffa0302d6e>] ? btrfs_submit_direct+0x414/0x414 [btrfs]
[<ffffffff811380fa>] ? fsnotify+0x236/0x266
[<ffffffffa02fc930>] btrfs_writepages+0x22/0x24 [btrfs]
[<ffffffff810cc215>] do_writepages+0x1c/0x25
[<ffffffff810c4958>] __filemap_fdatawrite_range+0x4e/0x50
[<ffffffff810c4982>] filemap_write_and_wait_range+0x28/0x51
[<ffffffffa0306b2e>] btrfs_sync_file+0x7d/0x198 [btrfs]
[<ffffffff8110aa26>] ? fsnotify_modify+0x5d/0x65
[<ffffffff8112d150>] vfs_fsync_range+0x18/0x21
[<ffffffff8112d170>] vfs_fsync+0x17/0x19
[<ffffffff8112d316>] do_fsync+0x29/0x3e
[<ffffffff8112d348>] sys_fsync+0xb/0xf
[<ffffffff81468352>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa02fe08c>] cow_file_range+0x1c4/0x32b [btrfs]
We fix this bug by trying to allocate the space again if there are block groups
in caching.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
|
|
In btrfs_get_acl(), when the second __btrfs_getxattr() call fails,
acl is not correctly set.
Therefore, a wrong value might return to the caller.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
|
|
Free space items are located in tree of tree roots, not in the extent
tree. It didn't pop up because lookup_free_space_inode() grabs the
inode all the time instead of actually searching the tree.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
|
|
To reproduce the bug:
# mount -o nodatacow /dev/sda7 /mnt/
# dd if=/dev/zero of=/mnt/tmp bs=4K count=1
1+0 records in
1+0 records out
4096 bytes (4.1 kB) copied, 0.000136115 s, 30.1 MB/s
# dd if=/dev/zero of=/mnt/tmp bs=4K count=1 conv=notrunc oflag=direct
dd: writing `/mnt/tmp': Input/output error
1+0 records in
0+0 records out
btrfs_ordered_update_i_size() may return 1, but btrfs_endio_direct_write()
mistakenly takes it as an error.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
It's not a big deal if we fail to allocate the array, and instead of
panic we can just give up compressing.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Otherwise we can execced the array bound of path->slots[].
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
We should retirn EINVAL if the start is beyond the end of the file
system in the btrfs_ioctl_fitrim(). Fix that by adding the appropriate
check for it.
Also in the btrfs_trim_fs() it is possible that len+start might overflow
if big values are passed. Fix it by decrementing the len so that start+len
is equal to the file system size in the worst case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
|
|
We won't defrag an extent, if it's bigger than the threshold we
specified and there's no small extent before it, but actually
the code doesn't work this way.
There are three bugs:
- When should_defrag_range() decides we should keep on defragmenting
an extent, last_len is not incremented. (old bug)
- The length that passes to should_defrag_range() is not the length
we're going to defrag. (new bug)
- We always defrag 256K bytes data, and a big extent can be part of
this range. (new bug)
For a file with 4 extents:
| 4K | 4K | 256K | 256K |
The result of defrag with (the default) 256K extent thresh should be:
| 264K | 256K |
but with those bugs, we'll get:
| 520K |
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
|
|
It's off-by-one, and thus we may skip the last page while defragmenting.
An example case:
# create /mnt/file with 2 4K file extents
# btrfs fi defrag /mnt/file
# sync
# filefrag /mnt/file
/mnt/file: 2 extents found
So it's not defragmented.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Don't use inode->i_size directly, since we're not holding i_mutex.
This also fixes another bug, that i_size can change after it's checked
against 0 and then (i_size - 1) can be negative.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
There's an off-by-one bug:
# create a file with lots of 4K file extents
# btrfs fi defrag /mnt/file
# sync
# filefrag -v /mnt/file
Filesystem type is: 9123683e
File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3372 64
1 64 3136 3435 1
2 65 3436 3136 64
3 129 3201 3499 1
4 130 3500 3201 64
5 194 3266 3563 1
6 195 3564 3266 64
7 259 3331 3627 1
8 260 3628 3331 40 eof
After this patch:
...
# filefrag -v /mnt/file
Filesystem type is: 9123683e
File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3372 300 eof
/mnt/file: 1 extent found
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
kmemleak found this:
unreferenced object 0xffff8801b64af968 (size 512):
comm "btrfs-cleaner", pid 3317, jiffies 4306810886 (age 903.272s)
hex dump (first 32 bytes):
00 82 01 07 00 ea ff ff c0 83 01 07 00 ea ff ff ................
80 82 01 07 00 ea ff ff c0 87 01 07 00 ea ff ff ................
backtrace:
[<ffffffff816875cc>] kmemleak_alloc+0x5c/0xc0
[<ffffffff8114aec3>] kmem_cache_alloc_trace+0x163/0x240
[<ffffffff8127a290>] btrfs_defrag_file+0xf0/0xb20
[<ffffffff8125d9a5>] btrfs_run_defrag_inodes+0x165/0x210
[<ffffffff812479d7>] cleaner_kthread+0x177/0x190
[<ffffffff81075c7d>] kthread+0x8d/0xa0
[<ffffffff816af5f4>] kernel_thread_helper+0x4/0x10
[<ffffffffffffffff>] 0xffffffffffffffff
"pages" is not always freed. Fix it removing the unnecesary additional return.
Signed-off-by: Diego Calleja <diegocg@gmail.com>
|
|
Offset field in data extent backref can underflow if clone range ioctl
is used. We can reliably detect the underflow because max file size is
limited to 2^63 and max data extent size is limited by block group size.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
|
|
I noticed we had a little bit of latency when writing out the space cache
inodes. It's because we flush it before we write anything in case we have dirty
pages already there. This doesn't matter though since we're just going to
overwrite the space, and there really shouldn't be any dirty pages anyway. This
makes some of my tests run a little bit faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Mitch kept hitting a panic because he was getting ENOSPC. One of my previous
patches makes it so we are much better at not allocating new metadata chunks.
Unfortunately coupled with the overcommit patch this works us into a bit of a
problem if we are removing a bunch of space and end up chewing up all of our
space with pinned extents. We can allocate chunks fine and overflow is ok, but
the only way to reclaim this space is to commit the transaction. So if we go to
overcommit, first check and see how much pinned space we have. If we have more
than 80% of the free space chewed up with pinned extents, just commit the
transaction, this will free up enough space for our reservation and we won't
have this problem anymore. With this patch Mitch's test doesn't blow up
anymore. Thanks,
Reported-and-tested-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Currently btrfs_block_rsv_check does 2 things, it will either refill a block
reserve like in the truncate or refill case, or it will check to see if there is
enough space in the global reserve and possibly refill it. However because of
overcommit we could be well overcommitting ourselves just to try and refill the
global reserve, when really we should just be committing the transaction. So
breack this out into btrfs_block_rsv_refill and btrfs_block_rsv_check. Refill
will try to reserve more metadata if it can and btrfs_block_rsv_check will not,
it will only tell you if the factor of the total space is still reserved.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
In __unlink_start_trans() if we don't have enough room for a reservation we will
check to see if the unlink will free up space. If it does that's great, but we
will still could add an orphan item, so we need to reserve enough space to add
the orphan item. Do this and migrate the space the global reserve so it all
works out right. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
We started setting trans->block_rsv = NULL to allow the delayed refs flushing
stuff to use the right block_rsv and then just made
btrfs_trans_release_metadata() unconditionally use the trans block rsv. The
problem with this is we need to reserve some space in the transaction and then
migrate it to the global block rsv, so we need to be able to free that out
properly. So instead just move btrfs_trans_release_metadata() before the
delayed ref flushing and use trans->block_rsv for the freeing. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Currently we only allow a maximum of 2 megabytes of pages to be flushed at a
time. This was ok before, but now we have overcommit which will screw us in a
heartbeat if we are quickly filling the disk. So instead pick either 2
megabytes or the number of pages we need to reclaim to be safe again, which ever
is larger. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
The only way we actually reclaim delalloc space is waiting for the IO to
completely finish. Usually we kick off a bunch of IO and wait for a little bit
and hope we can make our reservation, and usually this works out pretty well.
With overcommit however we can get seriously underwater if we're filling up the
disk quickly, so we need to be able to force the delalloc shrinker to wait for
the ordered IO to finish to give us a better chance of actually reclaiming
enough space to get our reservation. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
