summaryrefslogtreecommitdiff
path: root/include/acpi
AgeCommit message (Collapse)Author
2013-03-01Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
2013-02-26Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-02-25ghes: add the needed hooks for EDAC error reportMauro Carvalho Chehab
In order to allow reporting errors via EDAC, add hooks for: 1) register an EDAC driver; 2) unregister an EDAC driver; 3) report errors via EDAC. As the EDAC driver will need to access the ghes structure, adds it as one of the parameters for ghes_do_proc. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21ghes: move structures/enum to a header fileMauro Carvalho Chehab
As a ghes_edac driver will need to access ghes structures, in order to properly handle the errors, move those structures to a separate header file. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-19Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas
* pci/yinghai-root-bus-hotplug: PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
2013-02-16PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbersYinghai Lu
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12) contents and associated each _PRT entry with a PCI bus number. The bus number association means dependencies on PCI device enumeration and bus number assignment, as well as on the PCI/ACPI binding process. After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"), these dependencies caused the IRQ issues reported by Peter: pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) pci 0000:00:1e.0: can't derive routing for PCI INT A snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5 irq 18: nobody cared (try booting with the "irqpoll" option) This patch removes _PRT caching. Instead, we evaluate _PRT as needed in the pci_enable_device() path. This also removes the dependency on PCI bus numbers: we can simply look at the _PRT associated with each bridge as we walk upstream toward the root. [bhelgaas: changelog] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561 Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-15Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (21 commits) ACPI / hotplug: Fix concurrency issues and memory leaks ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE ACPI / scan: Full transition to D3cold in acpi_device_unregister() ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock ACPI: Drop the container.h header file ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table ACPI / scan: Make container driver use struct acpi_scan_handler ACPI / scan: Remove useless #ifndef from acpi_eject_store() ACPI: Unbind ACPI drv when probe failed ACPI: sysfs eject support for ACPI scan handlers ACPI / scan: Follow priorities of IDs when matching scan handlers ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx() ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c ACPI / scan: Clean up acpi_bus_get_parent() ACPI / platform: Use struct acpi_scan_handler for creating devices ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler ACPI / PCI: Make PCI root driver use struct acpi_scan_handler ACPI / scan: Introduce struct acpi_scan_handler ACPI / scan: Make scanning of fixed devices follow the general scheme ACPI: Drop device start operation that is not used ...
2013-02-13ACPI / hotplug: Fix concurrency issues and memory leaksRafael J. Wysocki
This changeset is aimed at fixing a few different but related problems in the ACPI hotplug infrastructure. First of all, since notify handlers may be run in parallel with acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device() and some of them are installed for ACPI handles that have no struct acpi_device objects attached (i.e. before those objects are created), those notify handlers have to take acpi_scan_lock to prevent races from taking place (e.g. a struct acpi_device is found to be present for the given ACPI handle, but right after that it is removed by acpi_bus_trim() running in parallel to the given notify handler). Moreover, since some of them call acpi_bus_scan() and acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock should be acquired by the callers of these two funtions rather by these functions themselves. For these reasons, make all notify handlers that can handle device addition and eject events take acpi_scan_lock and remove the acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim(). Accordingly, update all of their users to make sure that they are always called under acpi_scan_lock. Furthermore, since eject operations are carried out asynchronously with respect to the notify events that trigger them, with the help of acpi_bus_hot_remove_device(), even if notify handlers take the ACPI scan lock, it still is possible that, for example, acpi_bus_trim() will run between acpi_bus_hot_remove_device() and the notify handler that scheduled its execution and that acpi_bus_trim() will remove the device node passed to acpi_bus_hot_remove_device() for ejection. In that case, the struct acpi_device object obtained by acpi_bus_hot_remove_device() will be invalid and not-so-funny things will ensue. To protect agaist that, make the users of acpi_bus_hot_remove_device() run get_device() on ACPI device node objects that are about to be passed to it and make acpi_bus_hot_remove_device() run put_device() on them and check if their ACPI handles are not NULL (make acpi_device_unregister() clear the device nodes' ACPI handles for that check to work). Finally, observe that acpi_os_hotplug_execute() actually can fail, in which case its caller ought to free memory allocated for the context object to prevent leaks from happening. It also needs to run put_device() on the device node that it ran get_device() on previously in that case. Modify the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-02-13ACPI: Drop the container.h header fileRafael J. Wysocki
The include/acpi/container.h only contains a definition of a structure that is not used any more, so drop it entirely. Similar change was proposed earlier by Toshi Kani. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-02-11Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: (35 commits) ACPI / PM: Handle missing _PSC in acpi_bus_update_power() ACPI / PM: Do not power manage devices in unknown initial states ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent ACPI / PM: Fix consistency check for power resources during resume ACPI / PM: Expose lists of device power resources to user space sysfs: Functions for adding/removing symlinks to/from attribute groups ACPI / PM: Expose current status of ACPI power resources ACPI / PM: Expose power states of ACPI devices to user space ACPI / scan: Prevent device add uevents from racing with user space ACPI / PM: Fix device power state value after transitions to D3cold ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD ACPI / PM: Sanitize checks in acpi_power_on_resources() ACPI / PM: Always evaluate _PSn after setting power resources ACPI / PM: Introduce helper for executing _PSn methods ACPI / PM: Make acpi_bus_init_power() more robust ACPI / PM: Fix build for unusual combination of Kconfig options ACPI / PM: remove leading whitespace from #ifdef ACPI / PM: Consolidate suspend-specific and hibernate-specific code ACPI / PM: Move device power management functions to device_pm.c ...
2013-02-11Merge branch 'acpica'Rafael J. Wysocki
* acpica: (56 commits) ACPICA: Update version to 20130117 ACPICA: Update predefined info table for _MLS method ACPICA: Remove some extraneous newlines in ACPI_ERROR type calls ACPICA: iASL/Disassembler: Add option to ignore NOOP opcodes/operators ACPICA: AcpiGetSleepTypeData: Allow \_Sx to return either 1 or 2 integers ACPICA: Update ACPICA copyrights to 2013 ACPICA: Update predefined info table ACPICA: Cleanup table handler naming conflicts. ACPICA: Source restructuring: split large files into 8 new files. ACPICA: Cleanup PM_TIMER_FREQUENCY definition. ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages. ACPICA: Update version to 20121220. ACPICA: Interpreter: Fix Store() when implicit conversion is not possible. ACPICA: Resources: Split interrupt share/wake bits into two fields. ACPICA: Resources: Support for ACPI 5 wake bit in ExtendedInterrupt descriptor. ACPICA: Interpreter: Add warning if 64-bit constant appears in 32-bit table. ACPICA: Update ACPICA initialization messages. ACPICA: Namespace: Eliminate dot...dot output during initialization. ACPICA: Resource manager: Add support for ACPI 5 wake bit in IRQ descriptor. ACPICA: Fix possible memory leak in dispatcher error path. ...
2013-01-30ACPI / scan: Introduce struct acpi_scan_handlerRafael J. Wysocki
Introduce struct acpi_scan_handler for representing objects that will do configuration tasks depending on ACPI device nodes' hardware IDs (HIDs). Currently, those tasks are done either directly by the ACPI namespace scanning code or by ACPI device drivers designed specifically for this purpose. None of the above is desirable, however, because doing that directly in the namespace scanning code makes that code overly complicated and difficult to follow and doing that in "special" device drivers leads to a great deal of confusion about their role and to confusing interactions with the driver core (for example, sysfs directories are created for those drivers, but they are completely unnecessary and only increase the kernel's memory footprint in vain). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-29Merge branch 'acpi-lpss' into acpi-cleanupRafael J. Wysocki
The following commits depend on the 'acpi-lpss' material.
2013-01-29Merge branch 'acpi-scan' into acpi-cleanupRafael J. Wysocki
The following commits depend on the 'acpi-scan' material.
2013-01-29Merge branch 'acpi-pm' into acpi-cleanupRafael J. Wysocki
The following commits depend on the 'acpi-pm' material.
2013-01-27Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas
* pci/yinghai-root-bus-hotplug: PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found PCI/ACPI: Print info if host bridge notify handler installation fails PCI: acpiphp: Move host bridge hotplug to pci_root.c PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work() PCI: Make device create/destroy logic symmetric PCI: Fix reference count leak in pci_dev_present() PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally PCI: Add root bus children dev's res to fail list PCI: acpiphp: Add is_hotplug_bridge detection Conflicts: drivers/pci/pci.h
2013-01-27Merge branch 'pci/acpi-scan2' into nextBjorn Helgaas
* pci/acpi-scan2: ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead ACPI: update ej_event interface to take acpi_device ACPI / scan: Add second pass to acpi_bus_trim() ACPI / scan: Change the implementation of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_device_unregister() ACPI: Remove the ops field from struct acpi_device ACPI: remove unused acpi_op_bind and acpi_op_unbind ACPI / scan: Fix check of device_attach() return value.
2013-01-25ACPI: Drop device start operation that is not usedRafael J. Wysocki
The ACPI device start operation, acpi_op_start, is never used, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-25ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-25ACPI / scan: Make it clear that acpi_bus_trim() cannot failRafael J. Wysocki
Since acpi_bus_trim() cannot fail, change its definition to a void function, so that its callers don't check the return value in vain and update the callers. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-25PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()Yinghai Lu
Will need to use it for PCI root bridge hotplug support, so rename *acpiphp* to *acpi* and move to osc.c. Also make kacpi_hotplug_wq static after that. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org
2013-01-25ACPICA: Update version to 20130117Bob Moore
Version 20130117. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25ACPICA: Update ACPICA copyrights to 2013Bob Moore
Includes all source headers and signons for the various tools. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-24ACPI / PM: Expose current status of ACPI power resourcesRafael J. Wysocki
Since ACPI power resources are going to be used more extensively on new hardware platforms, it becomes necessary for user space (powertop in particular) to observe some properties of those resources for diagnostics purposes. For this reason, expose the current status of each ACPI power resource to user space via sysfs by adding a new resource_in_use attribute to the sysfs directory representing the given power resource. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-19ACPI / PM: Move device power management functions to device_pm.cRafael J. Wysocki
Move ACPI device power management functions from drivers/acpi/bus.c to drivers/acpi/device_pm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() insteadRafael J. Wysocki
The only difference between acpi_bus_scan() and acpi_bus_add() is the invocation of acpi_update_all_gpes() in the latter which in fact is unnecessary, because acpi_update_all_gpes() has already been called by acpi_scan_init() and the way it is implemented guarantees the next invocations of it to do nothing. For this reason, drop acpi_bus_add() and make all its callers use acpi_bus_scan() directly instead of it. Additionally, rearrange the code in acpi_scan_init() slightly to improve the visibility of the acpi_update_all_gpes() call in there. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-18Merge branch 'acpica' into acpi-lpssRafael J. Wysocki
The following commits depend on the 'acpica' material.
2013-01-17ACPI / PM: Common string representations of device power statesRafael J. Wysocki
The function returning string representations of ACPI device power states, state_string((), is now static, because it is only used internally in drivers/acpi/bus.c. However, it will be used outside of that file going forward, so rename it to acpi_power_state_string(), add a kerneldoc comment to it and add its header to acpi_bus.h. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17ACPI / PM: More visible function for retrieving device power statesRafael J. Wysocki
The function used for retrieving ACPI device power states, __acpi_bus_get_power(), is now static, because it is only used internally in drivers/acpi/bus.c. However, it will be used outside of that file going forward, so rename it to acpi_device_get_power(), in analogy with acpi_device_set_power(), add a kerneldoc comment to it and add its header to acpi_bus.h. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17ACPI / PM: Take order attribute of wakeup power resources into accountRafael J. Wysocki
ACPI power resources have an order attribute that should be taken into account when turning them on and off, but it is not used now. Modify the power resources management code to preserve the spec-compliant ordering of wakeup power resources. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17ACPI / PM: Take order attribute of power resources into accountRafael J. Wysocki
ACPI power resources have an order attribute that should be taken into account when turning them on and off, but it is not used now. Modify the power resources management code to preserve the spec-compliant ordering of power resources that power states of devices depend on (analogous changes will be done separately for power resources used for wakeup). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17ACPI / PM: Rework the handling of devices depending on power resourcesRafael J. Wysocki
Commit 0090def6 (ACPI: Add interface to register/unregister device to/from power resources) made it possible to indicate to the ACPI core that if the given device depends on any power resources, then it should be resumed as soon as all of the power resources required by it to transition to the D0 power state have been turned on. Unfortunately, however, this was a mistake, because all devices depending on power resources should be treated this way (i.e. they should be resumed when all power resources required by their D0 state have been turned on) and for the majority of those devices the ACPI core can figure out by itself which (physical) devices depend on what power resources. For this reason, replace the code added by commit 0090def6 with a new, much more straightforward, mechanism that will be used internally by the ACPI core and remove all references to that code from kernel subsystems using ACPI. For the cases when there are (physical) devices that should be resumed whenever a not directly related ACPI device node goes into D0 as a result of power resources configuration changes, like in the SATA case, add two new routines, acpi_dev_pm_add_dependent() and acpi_dev_pm_remove_dependent(), allowing subsystems to manage such dependencies. Convert the SATA subsystem to use the new functions accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-15ACPI: update ej_event interface to take acpi_deviceYinghai Lu
Should use acpi_device pointer directly instead of use handle and get the device pointer again later. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-15ACPI / scan: Drop the second argument of acpi_bus_trim()Rafael J. Wysocki
All callers of acpi_bus_trim() pass 1 (true) as the second argument of it, so remove that argument entirely and change acpi_bus_trim() to always behave as though it were 1. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
2013-01-15ACPI: Remove the ops field from struct acpi_deviceRafael J. Wysocki
The ops field in struct acpi_device is not used anywhere, so remove it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
2013-01-14ACPI: remove unused acpi_op_bind and acpi_op_unbindJiang Liu
With commit f2a33cde55a03 "ACPI: Drop ACPI device .bind() and .unbind() callbacks", acpi_op_bind and acpi_op_unbind are not used any more. So remove them. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-14ACPI / PCI: Set root bridge ACPI handle in advanceRafael J. Wysocki
The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-11ACPICA: Cleanup table handler naming conflicts.Lv Zheng
This is a cosmetic patch only. Comparison of the resulting binary showed only line number differences. This patch does not affect the generation of the Linux binary. This patch decreases 44 lines of 20121114 divergence.diff. There are naming conflicts between Linux and ACPICA on table handlers. This patch cleans up this conflicts to reduce the source code diff between Linux and ACPICA. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-11ACPICA: Source restructuring: split large files into 8 new files.Bob Moore
Created logical splits for eight new files. Improves modularity and configurability. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Cleanup PM_TIMER_FREQUENCY definition.Lv Zheng
This is a cosmetic patch only. Comparison of the resulting binary showed only line number differences. This patch does not affect the generation of the Linux binary. This patch decreases 13 lines of 20121114 divergence.diff. There is updates in ACPICA for PM_TIMER_FREQUENCY macro, this patch cleans up the usage of this macro in Linux. This patch can also reduce the source code diff between Linux and ACPICA. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages.Bob Moore
Fix two issues with the ACPI_DEBUG_PRINT macros. 1) Add the ACPI_DO_WHILE0 macro to the main DEBUG_PRINT helper macro. 2) Rename ACPI_DEBUG macro to ACPI_DO_DEBUG_PRINT since ACPI_DEBUG is already commonly used by the various hosts. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Update version to 20121220.Bob Moore
Version 20121220. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Resources: Split interrupt share/wake bits into two fields.Bob Moore
These two bits are merged at the external interface level for the IRQ, Interrupt, and GpioInt resource descriptors. However, these bits are logically independent and there is no need to keep them merged internally. Therefore, this change splits the bits into "sharable" and "wake capable" fields within the resource manager. This simplifies drive code that needs to examine these bits. Aaron Lu, Bob Moore. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Update for non-configured ACPI_IS_DEBUG_ENABLED macro.Bob Moore
Also add acoutput.h to the nsdump.c file. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: iASL: Finish support for the TPM2 table.Bob Moore
Add disassembler, table compiler, and template support. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: iASL: Finish support for CSRT table.Bob Moore
Add intel-specific shared info subtable. Add data table compiler and template support. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Merge all debug output macros into a single file, acoutput.Bob Moore
Moved the debug trace macros from acmacros.h into acoutput.h where they belong. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Update ACPI_IS_DEBUG_ENABLED macro.Bob Moore
Add extra parens to allow use of !ACPI_IS_DEBUG_ENABLED. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: DEBUG_PRINT macros: Update to improve performance.Bob Moore
Move check for "debug enable" to before the actual call to the debug print routine. Improves time of ASLTS by about 15%. Also, remove "safe" exit macros since no complex expressions are ever used in the return statements. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Add header file support for the ACPI 5 TPM2 ACPI table.Bob Moore
Reserved in ACPI 5.0 specification, but defined in a November 2011 Microsoft document. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>