summaryrefslogtreecommitdiff
path: root/include/linux/amba
AgeCommit message (Collapse)Author
2010-05-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
2010-05-25Merge remote branch 'origin' into secretlab/next-spiGrant Likely
2010-05-25spi/pl022: add support for the PL023 derivateLinus Walleij
This adds support for a further ST variant of the PL022 called PL023. Some differences in the control registers due to being stripped down to SPI mode only, and a new clock feedback sample delay config setting is available. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: fix up differences between ARM and ST versionsLinus Walleij
The PL022 SPI driver did not cleanly separate between the original unmodified ARM version and the ST Microelectronics versions. Split this more cleanly and fix some whitespace moaning from checkpatch at the same time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-24DMA: PL330: Add dma api driverJassi Brar
Add DMA Engine API driver for the PL330 DMAC. This driver is supposed to be reusable by various platforms that have one or more PL330 DMACs. Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been implemented. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> [dan.j.williams@intel.com: missing slab.h and ->device_control() fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
2010-04-14ARM: 6033/1: ARM: MMCI: pass max frequency from platformLinus Walleij
This introduce the field f_max into the mmci_platform_data, making it possible to pass in a desired block clocking frequency from a board configuration. This is often more desirable than using a module parameter. We keep the module parameter as a fallback as well as the default frequency specified for this parameter if a parameter is not provided. This also adds some kerneldoc style documentation to the platform data struct in mmci.h. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29ARM: 6003/1: removing compilation warning from pl061.hviresh kumar
pl061.h is using u8 type. including <linux/types.h> in pl061.h to avoid warning. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.hviresh kumar
linux/amba/bus.h have dependencies on linux/device.h and linux/resource.h, but it doesn't include them. We get compilation errors in our files which include bus.h but doesn't include device.h and resource.h. This patch includes device.h and resource.h in linux/amba/bus.h file. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linux Walleij <linux.ml.walleij@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-14Video: ARM CLCD: Better fix for swapped IENB and CNTL registersRussell King
On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20ARM: 5951/1: ARM: fix documentation of the PrimeCell busLinus Walleij
This fixes the filepath encoded in <linux/amba/bus.h> and adds some documentation as to what this bus really means. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-22ARM: 5720/1: Move MMCI header to amba include dirLinus Walleij
This moves the mmci platform data definition struct away from arch/arm/include/asm/mach/mmc.h into the more proper place among the other primecells in include/linux/amba/mmci.h and at the same time renames it to "mmci.h", and also the struct in this file confusingly named mmc_platform_data has been renamed mmci_platform_data for clarity. Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21Merge branch 'u300' into develRussell King
2009-09-18ARM: 5678/1: SSP/SPI PL022 polarity terminology fixLinus Walleij
The definition of the SPI clock phase for the Motorola mode of the PL022 driver was incorrect: the spec had been interpreted as data being recieved on rising or falling edge of the clocks while the correct interpretation is that data can be recieved on the first or second edge transition, falling or rising depending on the polarity setting. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12ARM: 5636/1: Move vendor enum to AMBA includeLinus Walleij
This moves the primecell vendor enum definition inside vic.c out to linux/amba/bus.h where it belongs and replace any occurances of specific vendor ID:s with the respective enums instead. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30ARM: PL093: Header file for PL093 SSMC PrimeCellBen Dooks
Header to define the standard registers for an PL093 SSMC memory controller. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-19gpio: driver for PrimeCell PL061 GPIO controllerBaruch Siach
This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral. The driver is implemented using the gpiolib framework. This driver also includes support for the use of the PL061 as an interrupt controller (secondary). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-10[ARM] 5546/1: ARM PL022 SSP/SPI driver v3Linus Walleij
This adds a driver for the ARM PL022 PrimeCell SSP/SPI driver found in the U300 platforms as well as in some ARM reference hardware, and in a modified version on the Nomadik board. Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com> Reviewed-by: Russell King <linux@arm.linux.org.uk> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-07[ARM] 5543/1: arm: serial amba: add missing declaration in serial.hAlessandro Rubini
This header is sometimes included in the uncompress stage to get register values, but no <linux/amba/bus.h> can be included there. So declare "struct amba_device" here before using it in a prototype. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04[ARM] 5541/1: serial/amba-pl011.c: add support for the modified port found ↵Alessandro Rubini
in Nomadik The Nomadik 8815 SoC has a slightly modified version of the PL011 block. The patch uses the different ID value as a key to select a vendor structure that is used to keep track of the differences, as suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-20[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini
The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-26[SERIAL] amba-pl010: allow platforms to specify modem control methodRussell King
The amba-pl010 hardware does not provide RTS and DTR control lines; it is expected that these will be implemented using GPIO. Allow platforms to supply a function to implement manipulation of modem control lines. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-16[ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control registerCatalin Marinas
Patch from Catalin Marinas Starting with PL111, the 5551 or 565 modes can be configured in the primecell's control register directly. This patch detects the required mode and sets the correct value. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07[ARM] Move AMBA include files to include/linux/amba/Russell King
Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v0.10.2 at 2024-11-07 07:44:02 (GMT)