summaryrefslogtreecommitdiff
path: root/include/linux/ceph
AgeCommit message (Collapse)Author
2013-07-09libceph: fix invalid unsigned->signed conversion for timespec encodingJosh Durgin
__kernel_time_t is a long, which cannot hold a U32_MAX on 32-bit architectures. Just drop this check as it has limited value. This fixes a crash like: [ 957.905812] kernel BUG at /srv/autobuild-ceph/gitbuilder.git/build/include/linux/ceph/decode.h:164! [ 957.914849] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 957.919978] Modules linked in: rbd libceph libcrc32c ipmi_devintf ipmi_si ipmi_msghandler nfsd nfs_acl auth_rpcgss nfs fscache lockd sunrpc [ 957.932547] CPU: 1 Tainted: G W (3.9.0-ceph-19bb6a83-highbank #1) [ 957.939881] PC is at ceph_osdc_build_request+0x8c/0x4f8 [libceph] [ 957.945967] LR is at 0xec520904 [ 957.949103] pc : [<bf13e76c>] lr : [<ec520904>] psr: 20000153 [ 957.949103] sp : ec753df8 ip : 00000001 fp : ec53e100 [ 957.960571] r10: ebef25c0 r9 : ec5fa400 r8 : ecbcc000 [ 957.965788] r7 : 00000000 r6 : 00000000 r5 : ffffffff r4 : 00000020 [ 957.972307] r3 : 51cc8143 r2 : ec520900 r1 : ec753e58 r0 : ec520908 [ 957.978827] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user [ 957.986039] Control: 10c5387d Table: 2c59c04a DAC: 00000015 [ 957.991777] Process rbd (pid: 2138, stack limit = 0xec752238) [ 957.997514] Stack: (0xec753df8 to 0xec754000) [ 958.001864] 3de0: 00000001 00000001 [ 958.010032] 3e00: 00000001 bf139744 ecbcc000 ec55a0a0 00000024 00000000 ebef25c0 fffffffe [ 958.018204] 3e20: ffffffff 00000000 00000000 00000001 ec5fa400 ebef25c0 ec53e100 bf166b68 [ 958.026377] 3e40: 00000000 0000220f fffffffe ffffffff ec753e58 bf13ff24 51cc8143 05b25ed2 [ 958.034548] 3e60: 00000001 00000000 00000000 bf1688d4 00000001 00000000 00000000 00000000 [ 958.042720] 3e80: 00000001 00000060 ec5fa400 ed53d200 ed439600 ed439300 00000001 00000060 [ 958.050888] 3ea0: ec5fa400 ed53d200 00000000 bf16a320 00000000 ec53e100 00000040 ec753eb8 [ 958.059059] 3ec0: ec51df00 ed53d7c0 ed53d200 ed53d7c0 00000000 ed53d7c0 ec5fa400 bf16ed70 [ 958.067230] 3ee0: 00000000 00000060 00000002 ed53d200 00000000 bf16acf4 ed53d7c0 ec752000 [ 958.075402] 3f00: ed980e50 e954f5d8 00000000 00000060 ed53d240 ed53d258 ec753f80 c04f44a8 [ 958.083574] 3f20: edb7910c ec664700 01ade920 c02e4c44 00000060 c016b3dc ec51de40 01adfb84 [ 958.091745] 3f40: 00000060 ec752000 ec753f80 ec752000 00000060 c0108444 00000007 ec51de48 [ 958.099914] 3f60: ed0eb8c0 00000000 00000000 ec51de40 01adfb84 00000001 00000060 c0108858 [ 958.108085] 3f80: 00000000 00000000 51cc8143 00000060 01adfb84 00000007 00000004 c000dd68 [ 958.116257] 3fa0: 00000000 c000dbc0 00000060 01adfb84 00000007 01adfb84 00000060 01adfb80 [ 958.124429] 3fc0: 00000060 01adfb84 00000007 00000004 beded1a8 00000000 01adf2f0 01ade920 [ 958.132599] 3fe0: 00000000 beded180 b6811324 b6811334 800f0010 00000007 2e7f5821 2e7f5c21 [ 958.140815] [<bf13e76c>] (ceph_osdc_build_request+0x8c/0x4f8 [libceph]) from [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd]) [ 958.152739] [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd]) from [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd]) [ 958.164486] [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd]) from [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd]) [ 958.175967] [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd]) from [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd]) [ 958.185975] [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd]) from [<c02e4c44>] (bus_attr_store+0x20/0x2c) [ 958.194850] [<c02e4c44>] (bus_attr_store+0x20/0x2c) from [<c016b3dc>] (sysfs_write_file+0x168/0x198) [ 958.203984] [<c016b3dc>] (sysfs_write_file+0x168/0x198) from [<c0108444>] (vfs_write+0x9c/0x170) [ 958.212768] [<c0108444>] (vfs_write+0x9c/0x170) from [<c0108858>] (sys_write+0x3c/0x70) [ 958.220768] [<c0108858>] (sys_write+0x3c/0x70) from [<c000dbc0>] (ret_fast_syscall+0x0/0x30) [ 958.229199] Code: e59d1058 e5913000 e3530000 ba000114 (e7f001f2) CC: stable@vger.kernel.org # 3.4+ Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03libceph: fix safe completionYan, Zheng
handle_reply() calls complete_request() only if the first OSD reply has ONDISK flag. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-02libceph: use slab cache for osd client requestsAlex Elder
Create a slab cache to manage allocation of ceph_osdc_request structures. This resolves: http://tracker.ceph.com/issues/3926 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: create source file "net/ceph/snapshot.c"Alex Elder
This creates a new source file "net/ceph/snapshot.c" to contain utility routines related to ceph snapshot contexts. The main motivation was to define ceph_create_snap_context() as a common way to create these structures, but I've moved the definitions of ceph_get_snap_context() and ceph_put_snap_context() there too. (The benefit of inlining those is very small, and I'd rather keep this collection of functions together.) Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: validate timespec conversionsAlex Elder
A ceph timespec contains 32-bit unsigned values for its seconds and nanoseconds components. For a standard timespec, both fields are signed, and the seconds field is almost surely 64 bits. Add some explicit casts so the fact that this conversion is taking place is obvious. Also trip a bug if we ever try to put out of range (negative or too big) values into a ceph timespec. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: add signed type limitsAlex Elder
Flesh out the limits defined in <linux/ceph/decode.h> to include the maximum and minimum values for signed type S8, S16, S32, and S64. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: support pages for class request dataAlex Elder
Add the ability to provide an array of pages as outbound request data for object class method calls. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: support raw data requestsAlex Elder
Allow osd request ops that aren't otherwise structured (not class, extent, or watch ops) to specify "raw" data to be used to hold incoming data for the op. Make use of this capability for the osd STAT op. Prefix the name of the private function osd_req_op_init() with "_", and expose a new function by that (earlier) name whose purpose is to initialize osd ops with (only) implied data. For now we'll just support the use of a page array for an osd op with incoming raw data. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill off osd data write_request parametersAlex Elder
In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: change how "safe" callback is usedAlex Elder
An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-02libceph: make method call data be a separate data itemAlex Elder
Right now the data for a method call is specified via a pointer and length, and it's copied--along with the class and method name--into a pagelist data item to be sent to the osd. Instead, encode the data in a data item separate from the class and method names. This will allow large amounts of data to be supplied to methods without copying. Only rbd uses the class functionality right now, and when it really needs this it will probably need to use a page array rather than a page list. But this simple implementation demonstrates the functionality on the osd client, and that's enough for now. This resolves: http://tracker.ceph.com/issues/4104 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: add, don't set data for a messageAlex Elder
Change the names of the functions that put data on a pagelist to reflect that we're adding to whatever's already there rather than just setting it to the one thing. Currently only one data item is ever added to a message, but that's about to change. This resolves: http://tracker.ceph.com/issues/2770 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: implement multiple data items in a messageAlex Elder
This patch adds support to the messenger for more than one data item in its data list. A message data cursor has two more fields to support this: - a count of the number of bytes left to be consumed across all data items in the list, "total_resid" - a pointer to the head of the list (for validation only) The cursor initialization routine has been split into two parts: the outer one, which initializes the cursor for traversing the entire list of data items; and the inner one, which initializes the cursor to start processing a single data item. When a message cursor is first initialized, the outer initialization routine sets total_resid to the length provided. The data pointer is initialized to the first data item on the list. From there, the inner initialization routine finishes by setting up to process the data item the cursor points to. Advancing the cursor consumes bytes in total_resid. If the resid field reaches zero, it means the current data item is fully consumed. If total_resid indicates there is more data, the cursor is advanced to point to the next data item, and then the inner initialization routine prepares for using that. (A check is made at this point to make sure we don't wrap around the front of the list.) The type-specific init routines are modified so they can be given a length that's larger than what the data item can support. The resid field is initialized to the smaller of the provided length and the length of the entire data item. When total_resid reaches zero, we're done. This resolves: http://tracker.ceph.com/issues/3761 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: replace message data pointer with listAlex Elder
In place of the message data pointer, use a list head which links through message data items. For now we only support a single entry on that list. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: have cursor point to dataAlex Elder
Rather than having a ceph message data item point to the cursor it's associated with, have the cursor point to a data item. This will allow a message cursor to be used for more than one data item. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: move cursor into messageAlex Elder
A message will only be processing a single data item at a time, so there's no need for each data item to have its own cursor. Move the cursor embedded in the message data structure into the message itself. To minimize the impact, keep the data->cursor field, but make it be a pointer to the cursor in the message. Move the definition of ceph_msg_data above ceph_msg_data_cursor so the cursor can point to the data without a forward definition rather than vice-versa. This and the upcoming patches are part of: http://tracker.ceph.com/issues/3761 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: record bio lengthAlex Elder
The bio is the only data item type that doesn't record its full length. Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: fix possible CONFIG_BLOCK build problemAlex Elder
This patch: 15a0d7b libceph: record message data length did not enclose some bio-specific code inside CONFIG_BLOCK as it should have. Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill off osd request r_data_in and r_data_outAlex Elder
Finally! Convert the osd op data pointers into real structures, and make the switch over to using them instead of having all ops share the in and/or out data structures in the osd request. Set up a new function to traverse the set of ops and release any data associated with them (pages). This and the patches leading up to it resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: set the data pointers when encoding opsAlex Elder
Still using the osd request r_data_in and r_data_out pointer, but we're basically only referring to it via the data pointers in the osd ops. And we're transferring that information to the request or reply message only when the op indicates it's needed, in osd_req_encode_op(). To avoid a forward reference, ceph_osdc_msg_data_set() was moved up in the file. Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(), because the ops array will already be zeroed anyway. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: combine initializing and setting osd dataAlex Elder
This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: format class info at init timeAlex Elder
An object class method is formatted using a pagelist which contains the class name, the method name, and the data concatenated into an osd request's outbound data. Currently when a class op is initialized in osd_req_op_cls_init(), the lengths of and pointers to these three items are recorded. Later, when the op is getting formatted into the request message, a new pagelist is created and that is when these items get copied into the pagelist. This patch makes it so the pagelist to hold these items is created when the op is initialized instead. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: specify osd op by index in requestAlex Elder
An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: add data pointers in osd op structuresAlex Elder
An extent type osd operation currently implies that there will be corresponding data supplied in the data portion of the request (for write) or response (for read) message. Similarly, an osd class method operation implies a data item will be supplied to receive the response data from the operation. Add a ceph_osd_data pointer to each of those structures, and assign it to point to eithre the incoming or the outgoing data structure in the osd message. The data is not always available when an op is initially set up, so add two new functions to allow setting them after the op has been initialized. Begin to make use of the data item pointer available in the osd operation rather than the request data in or out structure in places where it's convenient. Add some assertions to verify pointers are always set the way they're expected to be. This is a sort of stepping stone toward really moving the data into the osd request ops, to allow for some validation before making that jump. This is the first in a series of patches that resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: rename data out field in osd request opAlex Elder
There are fields "indata" and "indata_len" defined the ceph osd request op structure. The "in" part is with from the point of view of the osd server, but is a little confusing here on the client side. Change their names to use "request" instead of "in" to indicate that it defines data provided with the request (as opposed the data returned in the response). Rename the local variable in osd_req_encode_op() to match. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: keep source rather than message osd op arrayAlex Elder
An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: define osd data initialization helpersAlex Elder
Define and use functions that encapsulate the initializion of a ceph_osd_data structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02ceph: build osd request message later for writepagesAlex Elder
Hold off building the osd request message in ceph_writepages_start() until just before it will be submitted to the osd client for execution. We'll still create the request and allocate the page pointer array after we learn we have at least one page to write. A local variable will be used to keep track of the allocated array of pages. Wait until just before submitting the request for assigning that page array pointer to the request message. Create ands use a new function osd_req_op_extent_update() whose purpose is to serve this one spot where the length value supplied when an osd request's op was initially formatted might need to get changed (reduced, never increased) before submitting the request. Previously, ceph_writepages_start() assigned the message header's data length because of this update. That's no longer necessary, because ceph_osdc_build_request() will recalculate the right value to use based on the content of the ops in the request. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: don't build request in ceph_osdc_new_request()Alex Elder
This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: record message data lengthAlex Elder
Keep track of the length of the data portion for a message in a separate field in the ceph_msg structure. This information has been maintained in wire byte order in the message header, but that's going to change soon. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: record length of bio list with bioAlex Elder
When assigning a bio pointer to an osd request, we don't have an efficient way of knowing the total length bytes in the bio list. That information is available at the point it's set up by the rbd code, so record it with the osd data when it's set. This and the next patch are related to maintaining the length of a message's data independent of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: drop ceph_osd_request->r_con_filling_msgAlex Elder
A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: define ceph_decode_pgid() only onceAlex Elder
There are two basically identical definitions of __decode_pgid() in libceph, one in "net/ceph/osdmap.c" and the other in "net/ceph/osd_client.c". Get rid of both, and instead define a single inline version in "include/linux/ceph/osdmap.h". Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: define source request op functionsAlex Elder
The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02ceph: move max constant definitionsAlex Elder
Move some definitions for max integer values out of the rbd code and into the more central "decode.h" header file. These really belong in a Linux (or libc) header somewhere, but I haven't gotten around to proposing that yet. This is in preparation for moving some code out of rbd.c and into the osd client. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: make message data be a pointerAlex Elder
Begin the transition from a single message data item to a list of them by replacing the "data" structure in a message with a pointer to a ceph_msg_data structure. A null pointer will indicate the message has no data; replace the use of ceph_msg_has_data() with a simple check for a null pointer. Create functions ceph_msg_data_create() and ceph_msg_data_destroy() to dynamically allocate and free a data item structure of a given type. When a message has its data item "set," allocate one of these to hold the data description, and free it when the last reference to the message is dropped. This partially resolves: http://tracker.ceph.com/issues/4429 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill last of ceph_msg_posAlex Elder
The only remaining field in the ceph_msg_pos structure is did_page_crc. In the new cursor model of things that flag (or something like it) belongs in the cursor. Define a new field "need_crc" in the cursor (which applies to all types of data) and initialize it to true whenever a cursor is initialized. In write_partial_message_data(), the data CRC still will be computed as before, but it will check the cursor->need_crc field to determine whether it's needed. Any time the cursor is advanced to a new piece of a data item, need_crc will be set, and this will cause the crc for that entire piece to be accumulated into the data crc. In write_partial_message_data() the intermediate crc value is now held in a local variable so it doesn't have to be byte-swapped so many times. In read_partial_msg_data() we do something similar (but mainly for consistency there). With that, the ceph_msg_pos structure can go away, and it no longer needs to be passed as an argument to prepare_message_data(). This cleanup is related to: http://tracker.ceph.com/issues/4428 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill most of ceph_msg_posAlex Elder
All but one of the fields in the ceph_msg_pos structure are now never used (only assigned), so get rid of them. This allows several small blocks of code to go away. This is cleanup of old code related to: http://tracker.ceph.com/issues/4428 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: collapse all data items into oneAlex Elder
It turns out that only one of the data item types is ever used at any one time in a single message (currently). - A page array is used by the osd client (on behalf of the file system) and by rbd. Only one osd op (and therefore at most one data item) is ever used at a time by rbd. And the only time the file system sends two, the second op contains no data. - A bio is only used by the rbd client (and again, only one data item per message) - A page list is used by the file system and by rbd for outgoing data, but only one op (and one data item) at a time. We can therefore collapse all three of our data item fields into a single field "data", and depend on the messenger code to properly handle it based on its type. This allows us to eliminate quite a bit of duplicated code. This is related to: http://tracker.ceph.com/issues/4429 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill ceph message bio_iter, bio_segAlex Elder
The bio_iter and bio_seg fields in a message are no longer used, we use the cursor instead. So get rid of them and the functions that operate on them them. This is related to: http://tracker.ceph.com/issues/4428 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: record residual bytes for all message data typesAlex Elder
All of the data types can use this, not just the page array. Until now, only the bio type doesn't have it available, and only the initiator of the request (the rbd client) is able to supply the length of the full request without re-scanning the bio list. Change the cursor init routines so the length is supplied based on the message header "data_len" field, and use that length to intiialize the "resid" field of the cursor. In addition, change the way "last_piece" is defined so it is based on the residual number of bytes in the original request. This is necessary (at least for bio messages) because it is possible for a read request to succeed without consuming all of the space available in the data buffer. This resolves: http://tracker.ceph.com/issues/4427 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: wrap auth methods in a mutexSage Weil
The auth code is called from a variety of contexts, include the mon_client (protected by the monc's mutex) and the messenger callbacks (currently protected by nothing). Avoid chaos by protecting all auth state with a mutex. Nothing is blocking, so this should be simple and lightweight. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-02libceph: wrap auth ops in wrapper functionsSage Weil
Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-02libceph: add update_authorizer auth methodSage Weil
Currently the messenger calls out to a get_authorizer con op, which will create a new authorizer if it doesn't yet have one. In the meantime, when we rotate our service keys, the authorizer doesn't get updated. Eventually it will be rejected by the server on a new connection attempt and get invalidated, and we will then rebuild a new authorizer, but this is not ideal. Instead, if we do have an authorizer, call a new update_authorizer op that will verify that the current authorizer is using the latest secret. If it is not, we will build a new one that does. This avoids the transient failure. This fixes one of the sorry sequence of events for bug http://tracker.ceph.com/issues/4282 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-02libceph: implement RECONNECT_SEQ featureSage Weil
This is an old protocol extension that allows the client and server to avoid resending old messages after a reconnect (following a socket error). Instead, the exchange their sequence numbers during the handshake. This avoids sending a bunch of useless data over the socket. It has been supported in the server code since v0.22 (Sep 2010). Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-02libceph: kill message trailAlex Elder
The wart that is the ceph message trail can now be removed, because its only user was the osd client, and the previous patch made that no longer the case. The result allows write_partial_msg_pages() to be simplified considerably. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: kill osd request r_trailAlex Elder
The osd trail is a pagelist, used only for a CALL osd operation to hold the class and method names, along with any input data for the call. It is only currently used by the rbd client, and when it's used it is the only bit of outbound data in the osd request. Since we already support (non-trail) pagelist data in a message, we can just save this outbound CALL data in the "normal" pagelist rather than the trail, and get rid of the trail entirely. The existing pagelist support depends on the pagelist being dynamically allocated, and ownership of it is passed to the messenger once it's been attached to a message. (That is to say, the messenger releases and frees the pagelist when it's done with it). That means we need to dynamically allocate the pagelist also. Note that we simply assert that the allocation of a pagelist structure succeeds. Appending to a pagelist might require a dynamic allocation, so we're already assuming we won't run into trouble doing so (we're just ignore any failures--and that should be fixed at some point). This resolves: http://tracker.ceph.com/issues/4407 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: have osd requests support pagelist dataAlex Elder
Add support for recording a ceph pagelist as data associated with an osd request. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: let osd ops determine request data lengthAlex Elder
The length of outgoing data in an osd request is dependent on the osd ops that are embedded in that request. Each op is encoded into a request message using osd_req_encode_op(), so that should be used to determine the amount of outgoing data implied by the op as it is encoded. Have osd_req_encode_op() return the number of bytes of outgoing data implied by the op being encoded, and accumulate and use that in ceph_osdc_build_request(). As a result, ceph_osdc_build_request() no longer requires its "len" parameter, so get rid of it. Using the sum of the op lengths rather than the length provided is a valid change because: - The only callers of osd ceph_osdc_build_request() are rbd and the osd client (in ceph_osdc_new_request() on behalf of the file system). - When rbd calls it, the length provided is only non-zero for write requests, and in that case the single op has the same length value as what was passed here. - When called from ceph_osdc_new_request(), (it's not all that easy to see, but) the length passed is also always the same as the extent length encoded in its (single) write op if present. This resolves: http://tracker.ceph.com/issues/4406 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02libceph: implement pages array cursorAlex Elder
Implement and use cursor routines for page array message data items for outbound message data. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>