summaryrefslogtreecommitdiff
path: root/include/linux/ipmi_smi.h
AgeCommit message (Collapse)Author
2012-11-19various: Fix spelling of "asynchronous" in comments.Adam Buchbinder
"Asynchronous" is misspelled in some comments. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31include: replace linux/module.h with "struct module" wherever possiblePaul Gortmaker
The <linux/module.h> pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used <linux/something.h> files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27ipmi: convert to seq_file interfaceAlexey Dobriyan
The ->read_proc interface is going away, convert to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc:Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-14IPMI: Add one interface to get more info of low-level IPMI deviceZhao Yakui
The IPMI smi_watcher will be used to catch the IPMI interface as they come or go. In order to communicate with the correct IPMI device, it should be confirmed whether it is what we wanted especially on the system with multiple IPMI devices. But the new_smi callback function of smi_watcher provides very limited info(only the interface number and dev pointer) and there is no detailed info about the low level interface. For example: which mechansim registers the IPMI interface(ACPI, PCI, DMI and so on). This is to add one interface that can get more info of low-level IPMI device. For example: the ACPI device handle will be returned for the pnp_acpi IPMI device. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-12ipmi: remove ipmi_smi.h self-includeCorey Minyard
There is no need for linux/ipmi_smi.h to include itself. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-04-29ipmi: remove ->write_proc codeAlexey Dobriyan
IPMI code theoretically allows ->write_proc users, but nobody uses this thus far. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29ipmi: style fixes in the base codeCorey Minyard
Lots of style fixes for the base IPMI driver. No functional changes. Basically fixes everything reported by checkpatch and fixes the comment style. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30IPMI: fix comparison in demangle_device_idCorey Minyard
Coverity spotted some incorrect code in a recent change to the IPMI driver; this patch make sure the data is really long enough to pull the manufacturer id and product id out of a get device id message. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Adrian Bunk <bunk@kernel.org> Cc: Stian Jordet <liste@jordet.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-18IPMI: add 0.9 supportCorey Minyard
Add support for IPMI 0.9 systems to the IPMI driver. Just handle a shorter get device ID command with less information. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Stian Jordet <liste@jordet.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] IPMI: Add maintenance modeCorey Minyard
Some commands and operations on a BMC can cause the BMC to "go away" for a while. This can cause the automatic flag processing and other things of that nature to timeout and generate annoying logs, or possibly cause other bad things to happen when in firmware update mode. Add detection of those commands (cold reset, warm reset, and any firmware command) and turns off automatic processing for 30 seconds. It also add a manual override either way. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] IPMI: pass sysfs name from lower level driverCorey Minyard
Pass in the sysfs name from the lower-level IPMI driver, as the coming IPMI serial driver will need that to link properly from the serial device sysfs directory. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] IPMI: fix startup race conditionCorey Minyard
Matt Domsch noticed a startup race with the IPMI kernel thread, it was possible (though extraordinarly unlikely) that a message could come in before the upper layer was ready to handle it. This patch splits the startup processing of an IPMI interface into two parts, one to get ready and one to actually start the processes to receive messages from the interface. [akpm@osdl.org: cleanups] Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] ipmi: add full sysfs supportCorey Minyard
Add full driver model support for the IPMI driver. It links in the proper bus and device support. It adds an "ipmi" driver interface that has each BMC discovered by the driver (as a device). These BMCs appear in the devices/platform directory. If there are multiple interfaces to the same BMC, the driver should discover this and will only have one BMC entry. The BMC entry will have pointers to each interface device that connects to it. The device information (statistics and config information) has not yet been ported over to the driver model from proc, that will come later. This work was based on work by Yani Ioannou. I basically rewrote it using that code as a guide, but he still deserves credit :). [bunk@stusta.de: make ipmi_find_bmc_guid() static] Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!