summaryrefslogtreecommitdiff
path: root/include/linux/mlx4
AgeCommit message (Collapse)Author
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-08-28IB/mlx4: Add receive flow steering supportHadar Hen Zion
Implement ib_create_flow() and ib_destroy_flow(). Translate the verbs structures provided by the user to HW structures and call the MLX4_QP_FLOW_STEERING_ATTACH/DETACH firmware commands. On the ATTACH command completion, the firmware provides a 64-bit registration ID, which is placed into struct mlx4_ib_flow that wraps the instance of struct ib_flow which is retuned to caller. Later, this reg ID is used for detaching that flow from the firmware. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-02include: Convert ethernet mac address declarations to use ETH_ALENJoe Perches
It's convenient to have ethernet mac addresses use ETH_ALEN to be able to grep for them a bit easier and also to ensure that the addresses are __aligned(2). Add #include <linux/if_ether.h> as necessary. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29net/mlx4_core: Respond to operation request by firmwareYevgeny Petrilin
This commit adds new firmware command and new firmware event. The firmware raises the MLX4_EVENT_TYPE_OP_REQUIRED event in order to signal the driver it needs to perform an administrative operation throughout the MLX4_CMD_GET_OP_REQ command. At the moment the supported operation is adding/removing multicast entries which are used by the firmware for handling NCSI traffic in B0 steering mode. Also, had to swap the order of mlx4_init_mcg_table() and mlx4_init_eq_table() to make sure that driver will get events only after resources are initialized to handle it. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net/mlx4_core: Add HW enforcement to VF link stateRony Efraim
When the firmware supports the UPDATE_QP command, if the VF link is disabled, block all QPs opened by the VF, by programming the UPDATE_QP command to drop all RX & TX traffic to/from these QPs. Operates only in VST mode. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net/mlx4_core: Dynamic VST to VST vlan/qos changesJack Morgenstein
Within VST mode, enable modifying the vlan and/or qos for a VF without requiring unbind/rebind. This requires firmware which supports the UPDATE_QP command. (If the command is not available, we fall back to requiring unbind/bind to activate these changes). To avoid race conditions with modify-qp on QPs that are affected by update-qp, this operation is performed on the comm_wq. If the update operation succeeds for all the necessary QPs, a vlan_unregister is performed for the abandoned vlan id. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-14net/mlx4: Add VF link state supportRony Efraim
Add support to change the link state of VF (vPort) Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11net/mlx4: Strengthen VLAN tags/priorities enforcement in VST modeRony Efraim
Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-04-27net/mlx4: Add support to get VF configRony Efraim
Support getting VF config. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-27net/mlx4: Add VF MAC spoof checking supportRony Efraim
Add ndo_set_vf_spoofchk support Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-27net/mlx4: Add set VF default vlan ID and priority supportRony Efraim
Add support to ndo_set_vf_vlan in the driver. Once this call is used the vport is considered to be in VST mode. In this mode, the PPF driver configures Ethernet QPs created by this VF to use this vlan id and priority. Currently RoCE isn't supported on that mode. The special values of VID=4095 or VID=0,UP=0 are considered as VGT. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-27net/mlx4: Add set VF mac address supportRony Efraim
Add ndo_set_vf_mac support which allows to set the MAC address for mlx4 VF Ethernet NICs from the host. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25mlx4_core: Expose a few helpers to fill DMFS HW strucuturesHadar Hen Zion
Re-arrange some of code which fills DMFS HW structures so we can use it from within the core driver and from the IB driver too, e.g when verbs DMFS structures are transformed into mlx4 hardware structs. Also, add struct mlx4_flow_handle struct which will be of use by the DMFS verbs flow in the IB driver. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-25mlx4_core: Directly expose fields of DMFS HW rule control segmentHadar Hen Zion
Some of struct mlx4_net_trans_rule_hw_ctrl fields were packed into u32 and accessed through bit field operations. Expose and access them directly as u8 or u16. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-25mlx4_core: Change a few DMFS fields names to match firmare specHadar Hen Zion
Change struct mlx4_net_trans_rule_hw_eth :: vlan_id name to vlan_tag Change struct mlx4_net_trans_rule_hw_ib :: r_u_qpn name to l3_qpn The patch doesn't introduce any functional change or API change towards the firmware. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-25mlx4: Match DMFS promiscuous field names to firmware specHadar Hen Zion
Align the names used by enum mlx4_net_trans_promisc_mode with the actual firmware specification. The patch doesn't introduce any functional change or API change towards the firmware. Remove MLX4_FS_PROMISC_FUNCTION_PORT which isn't of use. Add new enums MLX4_FS_{UC/MC}_SNIFFER as a preparation step for sniffer support. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-25mlx4_core: Move DMFS HW structs to common header fileHadar Hen Zion
Move flow steering HW structures to be on the public mlx4 include directory, as a pre-step for the mlx4 IB driver to use them too. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24net/mlx4_en: Add HW timestamping (TS) supportAmir Vadai
The patch allows to enable/disable HW timestamping for incoming and/or outgoing packets. It adds and initializes all structs and callbacks needed by kernel TS API. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. When enabling TS on receive flow - VLAN stripping will be disabled. Also were made all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Read HCA frequency and map internal clockEugenia Emantayev
Read HCA frequency, read PCI clock bar and offset, map internal clock to PCI bar. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Add timestamping device capabilityEugenia Emantayev
Add new device capability for timestamping support and query FW to retrieve it. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17mlx4_core: Implement SRQ object lookup from srqnShlomo Pongratz
Expose a new API mlx4_srq_lookup() to retrive a SRQ based on its number. This API is needed in the mlx4_ib driver CQ polling logic, when a work completion is associated with a XRC TGT QP. Since a target QP may redirect to more than one XRC SRQ, the srq field in the QP has no usage and the real XRC SRQ need to be retrived using the information from the XRCETH IB header which is placed in the HW CQE. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-07net/mlx4_en: Enable DCB ETS ops only when supported by the firmwareOr Gerlitz
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards which don't support ETS, advertize only PFC DCB ops. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-26Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband update from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.9: - SRP error handling fixes from Bart Van Assche - Implementation of memory windows for mlx4 from Shani Michaeli - Lots of cxgb4 HW driver fixes from Vipul Pandya - Make iSER work for virtual functions, other fixes from Or Gerlitz - Fix for bug in qib HW driver from Mike Marciniszyn - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman - Various cleanups and warning fixes from Julia Lawall, Paul Bolle, Wei Yongjun" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits) IB/mlx4: Advertise MW support IB/mlx4: Support memory window binding mlx4: Implement memory windows allocation and deallocation mlx4_core: Enable memory windows in {INIT, QUERY}_HCA mlx4_core: Disable memory windows for virtual functions IPoIB: Free ipoib neigh on path record failure so path rec queries are retried IB/srp: Fail I/O requests if the transport is offline IB/srp: Avoid endless SCSI error handling loop IB/srp: Avoid sending a task management function needlessly IB/srp: Track connection state properly IB/mlx4: Remove redundant NULL check before kfree IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool IB/iser: Enable iser when FMRs are not supported IB/iser: Avoid error prints on EAGAIN registration failures IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML IB/uverbs: Implement memory windows support in uverbs IB/core: Add "type 2" memory windows support mlx4_core: Propagate MR deregistration failures to caller mlx4_core: Rename MPT-related functions to have mpt_ prefix ...
2013-02-25IB/mlx4: Support memory window bindingShani Michaeli
* Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4: Implement memory windows allocation and deallocationShani Michaeli
Implement MW allocation and deallocation in mlx4_core and mlx4_ib. Pass down the enable bind flag when registering memory regions. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21mlx4_core: Propagate MR deregistration failures to callerShani Michaeli
MR deregistration fails when memory windows are bound to the MR. Handle such failures by propagating them to the caller ULP. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21IB/mlx4_ib: Remove local invalidate segment unused fieldsShani Michaeli
Remove unused fields from the local invalidate WQE segment structure. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-08net/mlx4: Move Ethernet related functionality from mlx4_core to mlx4_enYan Burman
Move low level code that deals with management of Ethernet MACs and QPs from mlx4_core to mlx4_en. Also convert the new functions to deal with MACs in form of char array instead of u64. Actual functions moved: mlx4_replace_mac mlx4_get_eth_qp mlx4_put_eth_qp To conduct this change, some functionality had to be exported from the core, the following functions were added: mlx4_get_base_qp __mlx4_replace_mac (low level function for CX1/A0 compatibility) Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Don't reassign port mac address on firmware that supports itMatan Barak
Mac reassignments should only be done when not supported by the firmware. To accomplish that, checking firmware capability bit to know whether we should reassign macs in the driver. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19mlx4_core: Allow choosing flow steering modeJack Morgenstein
Device managed flow steering will be enabled only under administrator directive provided through setting the existing module parameter log_num_mgm_entry_size to -1 (if the device actually supports flow steering). If flow steering isn't requested or not available, the driver will use the value of log_num_mgm_entry_size and B0 steering. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-26mlx4: 64-byte CQE/EQE supportOr Gerlitz
ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculationsJack Morgenstein
Previously, the structure of a guest's proxy QPs followed the structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1, qp1 port 2, ...). The guest then did offset calculations on the sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP(). This is now changed so that the guest does no offset calculations regarding proxy or tunnel QPs to use. This change frees the PPF from needing to adhere to a specific order in allocating proxy and tunnel QPs. Now QUERY_FUNC_CAP provides each port individually with its proxy qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are used directly where required (with no offset calculations). To accomplish this change, several fields were added to the phys_caps structure for use by the PPF and by non-SR-IOV mode: base_sqpn -- in non-sriov mode, this was formerly sqp_start. base_proxy_sqpn -- the first physical proxy qp number -- used by PPF base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF. The current code in the PPF still adheres to the previous layout of sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this layout without affecting VF or (paravirtualized) PF code. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4: Paravirtualize Node Guids for slavesJack Morgenstein
This is necessary in order to support > 1 VF/PF in a VM for software that uses the node guid as a discriminator, such as librdmacm. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4: Activate SR-IOV mode for IBJack Morgenstein
Remove the error returns for IB ports from mlx4_ib_add, mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper. Currently, SRIOV is supported only for devices for which the link layer is IB on all ports; RoCE support will be added later. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01net/mlx4_core: Adjustments to SET_PORT for IB SR-IOVJack Morgenstein
1. Slaves may not set the IS_SM capability for the port. 2. DEV_MGMT may not be set in multifunction mode. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4_core: Add IB port-state machine and port mgmt event propagationJack Morgenstein
For an IB port, a slave should not show port active until that slave has a valid alias-guid (provided by the subnet manager). Therefore the port-up event should be passed to a slave only after both the port is up, and the slave's alias-guid has been set. Also, provide the infrastructure for propagating port-management events (client-reregister, etc) to slaves. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoopJack Morgenstein
This requires: 1. Replacing the paravirtualized P_Key index (inserted by the guest) with the real P_Key index. 2. For UD QPs, placing the guest's true source GID index in the address path structure mgid field, and setting the ud_force_mgid bit so that the mgid is taken from the QP context and not from the WQE when posting sends. 3. For UC and RC QPs, placing the guest's true source GID index in the address path structure mgid field. 4. For tunnel and proxy QPs, setting the Q_Key value reserved for that proxy/tunnel pair. Since not all the above adjustments occur in all the QP transitions, the QP transitions require separate wrapper functions. Secondly, initialize the P_Key virtualization table to its default values: Master virtualized table is 1-1 with the real P_Key table, guest virtualized table has P_Key index 0 mapped to the real P_Key index 0, and all the other P_Key indices mapped to the reserved (invalid) P_Key at index 127. Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache. and generating events on the master only if a P_Key actually changed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01IB/mlx4: Initialize SR-IOV IB support for slaves in master contextJack Morgenstein
Allocate SR-IOV paravirtualization resources and MAD demuxing contexts on the master. This has two parts. The first part is to initialize the structures to contain the contexts. This is done at master startup time in mlx4_ib_init_sriov(). The second part is to actually create the tunneling resources required on the master to support a slave. This is performed the master detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event generated when a slave initializes its comm channel). For the master, there is no such startup event, so it creates its own tunneling resources when it starts up. In addition, the master also creates the real special QPs. The ib_core layer on the master causes creation of proxy special QPs, since the master is also paravirtualized at the ib_core layer. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01mlx4_core: Add proxy and tunnel QPs to the reserved QP areaJack Morgenstein
In addition, pass the proxy and tunnel QP numbers to slaves so the driver can perform special QP paravirtualization. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-01IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP supportJack Morgenstein
1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-07net/mlx4_core: Add security check / enforcement for flow steering rules set ↵Hadar Hen Zion
for VMs Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Put Firmware flow steering structures in common header filesHadar Hen Zion
To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-24Merge tag 'rdma-for-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - Updates to the qib low-level driver - First chunk of changes for SR-IOV support for mlx4 IB - RDMA CM support for IPv6-only binding - Other misc cleanups and fixes Fix up some add-add conflicts in include/linux/mlx4/device.h and drivers/net/ethernet/mellanox/mlx4/main.c * tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits) IB/qib: checkpatch fixes IB/qib: Add congestion control agent implementation IB/qib: Reduce sdma_lock contention IB/qib: Fix an incorrect log message IB/qib: Fix QP RCU sparse warnings mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them mlx4_core: Allow guests to have IB ports mlx4_core: Implement mechanism for reserved Q_Keys net/mlx4_core: Free ICM table in case of error IB/cm: Destroy idr as part of the module init error flow mlx4_core: Remove double function declarations IB/mlx4: Fill the masked_atomic_cap attribute in query device IB/mthca: Fill in sq_sig_type in query QP IB/mthca: Warning about event for non-existent QPs should show event type IB/qib: Fix sparse RCU warnings in qib_keys.c net/mlx4_core: Initialize IB port capabilities for all slaves mlx4: Use port management change event instead of smp_snoop IB/qib: RCU locking for MR validation IB/qib: Avoid returning EBUSY from MR deregister IB/qib: Fix UC MR refs for immediate operations ...
2012-07-19{NET,IB}/mlx4: Add rmap support to mlx4_assign_eqAmir Vadai
Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap. If supplied, the assigned IRQ is tracked using rmap infrastructure. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19net/mlx4: Move MAC_MASK to a common placeAmir Vadai
Define this macro is one common place instead of duplicating it over the code Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and ↵Jack Morgenstein
paravirtualize them To allow easy paravirtualization of P_Key and GID table sizes, keep paravirtualized sizes in mlx4_dev->caps, but save the actual physical sizes from FW in struct: mlx4_dev->phys_cap. In addition, in SR-IOV mode, do the following: 1. Reduce reported P_Key table size by 1. This is done to reserve the highest P_Key index for internal use, for declaring an invalid P_Key in P_Key paravirtualization. We require a P_Key index which always contain an invalid P_Key value for this purpose (i.e., one which cannot be modified by the subnet manager). The way to do this is to reduce the P_Key table size reported to the subnet manager by 1, so that it will not attempt to access the P_Key at index #127. 2. Paravirtualize the GID table size to 1. Thus, each guest sees only a single GID (at its paravirtualized index 0). In addition, since we are paravirtualizing the GID table size to 1, we add paravirtualization of the master GID event here (i.e., we do not do ib_dispatch_event() for the GUID change event on the master, since its (only) GUID never changes). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11mlx4_core: Implement mechanism for reserved Q_KeysJack Morgenstein
The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-10net/mlx4_core: Initialize IB port capabilities for all slavesJack Morgenstein
With IB SR-IOV, each slave has its own separate copy of the port capabilities flags. For example, the master can run a subnet manager (which causes the IsSM bit to be set in the master's port capabilities) without affecting the port capabilities seen by the slaves (the IsSM bit will be seen as cleared in the slaves). Also add a static inline mlx4_master_func_num() to enhance readability of the code. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-10mlx4: Use port management change event instead of smp_snoopJack Morgenstein
The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>