summaryrefslogtreecommitdiff
path: root/include/linux/mlx4
AgeCommit message (Collapse)Author
2011-03-23mlx4: Add blue flame support for kernel consumersEli Cohen
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Enabling new steeringYevgeny Petrilin
The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Wake on LAN supportYevgeny Petrilin
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Changing interrupt schemeYevgeny Petrilin
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-12IB/mlx4: Handle protocol field in multicast tableAleksey Senin
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-10-26Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier
'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
2010-10-25IB/mlx4: Add VLAN support for IBoEEli Cohen
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/mlx4: Add support for IBoEEli Cohen
Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Update data structures and constants for IBoEEli Cohen
Add fields to hardware data structures and add new constants required for IBoE support. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Allow protocol drivers to find corresponding interfacesEli Cohen
Add a mechanism for mlx4 protocol drivers to get a pointer to other drivers's device objects. For this, an exported function, mlx4_get_protocol_dev() is added, which allows a driver to get some other driver's device based on the protocol that the driver implements. Two protocols are added: MLX4_PROTOCOL_IB and MLX4_PROTOCOL_EN. This will be used in mlx4 IBoE support so that mlx4_ib can find the corresponding mlx4_en netdev. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and rename a few things. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144Jack Morgenstein
The Node Description cannot be changed via MADs (it is read-only). Until now, it was changed in the driver via sysfs, and the new Node Description was simply inserted by the driver into MAD responses (replacing the description returned by FW). System startup scripts use the sysfs interface to change the node description at driver startup to show the hostname, etc. However, this has a race condition: the SM could discover the original FW node description rather than the system-specific description if it queried the port before the startup scripts finish running. For mlx4, we fix this with a new FW command (SET_NODE) that allows passing the new node description to FW. When this command is invoked, FW sends a trap 144 to the SM. When it gets this trap, the SM can query the node to obtain the new node description -- thus eliminating the effects of the race. This patch simply calls SET_NODE command when a new node description is entered via sysfs (thus causing trap 144 to be issued by the FW). We ignore all failures of the SET_NODE command (including those caused by using a device FW that predates the SET_NODE command), since in that case things work just as before. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-11IB/mlx4: Limit size of fast registration WRsEli Cohen
Fix the limit on the size of max fast registration WRs that can be posted to match hardware capabilities. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Added self diagnostics test implementationYevgeny Petrilin
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21IB/mlx4: Add support for masked atomic operationsVladimir Sokolovsky
Add support for masked atomic operations (masked compare and swap, masked fetch and add). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-12IB/mlx4: Remove limitation on LSO header sizeEli Cohen
Current code has a limitation: an LSO header is not allowed to cross a 64 byte boundary. This patch removes this limitation by setting the WQE RR for large headers thus allowing LSO headers of any size. The extra buffer reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes, assuming this is reasonable upper limit for header length. Also, this patch will cause IB_DEVICE_UD_TSO to be set only for HCA FW versions that set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-05IB/mlx4: Add strong ordering to local inval and fast reg work requestsJack Morgenstein
The ConnectX Programmer's Reference Manual states that the "SO" bit must be set when posting Fast Register and Local Invalidate send work requests. When this bit is set, the work request will be executed only after all previous work requests on the send queue have been executed. (If the bit is not set, Fast Register and Local Invalidate WQEs may begin execution too early, which violates the defined semantics for these operations) This fixes the issue with NFS/RDMA reported in <http://lists.openfabrics.org/pipermail/general/2009-April/059253.html> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen
The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19mlx4_core: Add link type autosensingYevgeny Petrilin
When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin
When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-29mlx4_core: Save/restore default port IB capability maskJack Morgenstein
Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as <https://bugs.openfabrics.org/show_bug.cgi?id=1183>, which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Multiple port type supportYevgeny Petrilin
Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Ethernet MAC/VLAN managementYevgeny Petrilin
Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Get ethernet MTU and default address from firmwareYevgeny Petrilin
Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Support multiple pre-reserved QP regionsYevgeny Petrilin
For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10mlx4_core: Add QP range reservation supportYevgeny Petrilin
To allow allocating an aligned range of consecutive QP numbers, add an interface to reserve an aligned range of QP numbers and have the QP allocation function always take a QP number. This will be used for RSS support in the mlx4_en Ethernet driver and also potentially by IPoIB RSS support. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07mlx4_core: Add ethernet fields to CQE structYevgeny Petrilin
Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25mlx4_core: Add VLAN tag field to WQE control segment structYevgeny Petrilin
Add fields for VLAN tag and insert VLAN tag flag to the control section struct. These fields will be used for sending ethernet packets. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23IB/mlx4: Add support for memory management extensions and local DMA L_KeyRoland Dreier
Add support for the following operations to mlx4 when device firmware supports them: - Send with invalidate and local invalidate send queue work requests; - Allocate/free fast register MRs; - Allocate/free fast register MR page lists; - Fast register MR send queue work requests; - Local DMA L_Key. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_segRoland Dreier
Make the struct name consistent with other WQE segment struct types defined in <linux/mlx4/qp.h>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15IB/mlx4: Add support for blocking multicast loopback packetsRon Livne
Add support for handling the IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK flag by using the per-multicast group loopback blocking feature of mlx4 hardware. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29mlx4_core: Add a way to set the "collapsed" CQ flagYevgeny Petrilin
Extend the mlx4_cq_resize() API with a way to set the "collapsed" flag for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-25mlx4_core: Add helper to move QP to ready-to-sendYevgeny Petrilin
Avoid duplicating code in ethernet and FC modules. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-25mlx4_core: Add HW queues allocation helpersYevgeny Petrilin
Wrap doorbell, buffer and MTT allocation in helper functions for ethernet and FC modules to use. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23mlx4_core: Move kernel doorbell management into coreYevgeny Petrilin
In addition to mlx4_ib, there will be ethernet and FC consumers of mlx4_core, so move the code for managing kernel doorbells into the core module to avoid having to duplicate this multiple times. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17IB/mlx4: Add support for resizing CQsVladimir Sokolovsky
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17IB/mlx4: Add support for modifying CQ moderation parametersEli Cohen
Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17IB/mlx4: Add IPoIB LSO supportEli Cohen
Add TSO support to the mlx4_ib driver. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17IB/mlx4: Add IPoIB checksum offload supportEli Cohen
ConnectX devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Ali Ayub <ali@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17mlx4_core: Fix confusion between mlx4_event and mlx4_dev_event enumsRoland Dreier
The struct mlx4_interface.event() method was supposed to get an enum mlx4_dev_event, but the driver code was actually passing in the hardware enum mlx4_event values. Fix up the callers of mlx4_dispatch_event() so that they pass in the right type of value, and fix up the event method in mlx4_ib so that it can handle the enum mlx4_dev_event values. This eliminates the need for the subtype parameter to the event method, so remove it. This also fixes the sparse warning drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types drivers/net/mlx4/intf.c:127:48: int enum mlx4_event versus drivers/net/mlx4/intf.c:127:48: int enum mlx4_dev_event Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08IB/mlx4: Use multiple WQ blocks to post smaller send WQEsJack Morgenstein
ConnectX HCA supports shrinking WQEs, so that a single work request can be made of multiple units of wqe_shift. This way, WRs can differ in size, and do not have to be a power of 2 in size, saving memory and speeding up send WR posting. Unfortunately, if we do this then the wqe_index field in CQEs can't be used to look up the WR ID anymore, so our implementation does this only if selective signaling is off. Further, on 32-bit platforms, we can't use vmap() to make the QP buffer virtually contigious. Thus we have to use constant-sized WRs to make sure a WR is always fully within a single page-sized chunk. Finally, we use WRs with the NOP opcode to avoid wrapping around the queue buffer in the middle of posting a WR, and we set the NoErrorCompletion bit to avoid getting completions with error for NOP WRs. However, NEC is only supported starting with firmware 2.2.232, so we use constant-sized WRs for older firmware. And, since MLX QPs only support SEND, we use constant-sized WRs in this case. When stamping during NOP posting, do stamping following setting of the NOP WQE valid bit. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-07mlx4_core: Clean up struct mlx4_bufRoland Dreier
Now that struct mlx4_buf.u is a struct instead of a union because of the vmap() changes, there's no point in having a struct at all. So move .direct and .page_list directly into struct mlx4_buf and get rid of a bunch of unnecessary ".u"s. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-07mlx4_core: For 64-bit systems, vmap() kernel queue buffersJack Morgenstein
Since kernel virtual memory is not a problem on 64-bit systems, there is no reason to use our own 2-layer page mapping scheme for large kernel queue buffers on such systems. Instead, map the page list to a single virtually contiguous buffer with vmap(), so that can we access buffer memory via direct indexing. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-07IB/mlx4: Consolidate code to get an entry from a struct mlx4_bufRoland Dreier
We use struct mlx4_buf for kernel QP, CQ and SRQ buffers, and the code to look up an entry is duplicated in get_cqe_from_buf() and the QP and SRQ versions of get_wqe(). Factor this out into mlx4_buf_offset(). This will also make it easier to switch over to using vmap() for buffers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-15mlx4_core: Kill mlx4_write64_raw()Roland Dreier
It's a leftover from development that's never used in the real driver. Signed-off-by: Roland Dreier <rolandd@cisco.com>