summaryrefslogtreecommitdiff
path: root/include/linux/nmi.h
AgeCommit message (Collapse)Author
2011-05-23watchdog: Change the default timeout and configure nmi watchdog period based ↵Mandeep Singh Baines
on watchdog_thresh Before the conversion of the NMI watchdog to perf event, the watchdog timeout was 5 seconds. Now it is 60 seconds. For my particular application, netbooks, 5 seconds was a better timeout. With a short timeout, we catch faults earlier and are able to send back a panic. With a 60 second timeout, the user is unlikely to wait and will instead hit the power button, causing us to lose the panic info. This change configures the NMI period to watchdog_thresh and sets the softlockup_thresh to watchdog_thresh * 2. In addition, watchdog_thresh was reduced to 10 seconds as suggested by Ingo Molnar. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-23watchdog: Disable watchdog when thresh is zeroMandeep Singh Baines
This restores the previous behavior of softlock_thresh. Currently, setting watchdog_thresh to zero causes the watchdog kthreads to consume a lot of CPU. In addition, the logic of proc_dowatchdog_thresh and proc_dowatchdog_enabled has been factored into proc_dowatchdog. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1306127423-3347-3-git-send-email-msb@chromium.org Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071018.GE22305@elte.hu>
2010-12-22x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus
CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-09lockup detector: Compile fixes from removing the old x86 nmi watchdogDon Zickus
My patch that removed the old x86 nmi watchdog broke other arches. This change reverts a piece of that patch and puts the change in the correct spot. Signed-off-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: fweisbec@gmail.com Cc: yinghai@kernel.org LKML-Reference: <1291068437-5331-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdogDon Zickus
Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it. This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers. Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86, nmi_watchdog: Remove the old nmi_watchdogDon Zickus
Now that we have a new nmi_watchdog that is more generic and sits on top of the perf subsystem, we really do not need the old nmi_watchdog any more. In addition, the old nmi_watchdog doesn't really work if you are using the default clocksource, hpet. The old nmi_watchdog code relied on local apic interrupts to determine if the cpu is still alive. With hpet as the clocksource, these interrupts don't increment any more and the old nmi_watchdog triggers false postives. This piece removes the old nmi_watchdog code and stubs out any variables and functions calls. The stubs are the same ones used by the new nmi_watchdog code, so it should be well tested. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-16lockup_detector: Cross arch compile fixesDon Zickus
Combining the softlockup and hardlockup code causes watchdog.c to build even without the hardlockup detection support. So if an arch, that has the previous and the new nmi watchdog implementations cohabiting, wants to know if the generic one is in use, CONFIG_LOCKUP_DETECTOR is not a reliable check. We need to use CONFIG_HARDLOCKUP_DETECTOR instead. Fixes: kernel/built-in.o: In function `touch_nmi_watchdog': (.text+0x449bc): multiple definition of `touch_nmi_watchdog' arch/sparc/kernel/built-in.o:(.text+0x11b28): first defined here Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <20100514151121.GR15159@redhat.com> [ use CONFIG_HARDLOCKUP_DETECTOR instead of CONFIG_PERF_EVENTS_NMI] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-12lockup_detector: Combine nmi_watchdog and softlockup detectorDon Zickus
The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-25nmi_watchdog: Clean up various small detailsDon Zickus
Mostly copy/paste whitespace damage with a couple of nitpicks by the checkpatch script. Fix the struct definition as requested by Ingo too. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: aris@redhat.com LKML-Reference: <1266880143-24943-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> -- arch/x86/kernel/apic/hw_nmi.c | 14 +++++------ arch/x86/kernel/traps.c | 6 ++-- include/linux/nmi.h | 2 - kernel/nmi_watchdog.c | 51 ++++++++++++++++++++---------------------- 4 files changed, 36 insertions(+), 37 deletions(-)
2010-02-14nmi_watchdog: Compile and portability fixesDon Zickus
The original patch was x86_64 centric. Changed the code to make it less so. ested by building and running on a powerpc. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: aris@redhat.com LKML-Reference: <1266013161-31197-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-08nmi_watchdog: Config option to enable new nmi_watchdogDon Zickus
These are the bits that enable the new nmi_watchdog and safely isolate the old nmi_watchdog. Only one or the other can run, not both at the same time. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-03debug lockups: Improve lockup detection, fix generic arch fallbackIngo Molnar
As Andrew noted, my previous patch ("debug lockups: Improve lockup detection") broke/removed SysRq-L support from architecture that do not provide a __trigger_all_cpu_backtrace implementation. Restore a fallback path and clean up the SysRq-L machinery a bit: - Rename the arch method to arch_trigger_all_cpu_backtrace() - Simplify the define - Document the method a bit - in the hope of more architectures adding support for it. [ The patch touches Sparc code for the rename. ] Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> LKML-Reference: <20090802140809.7ec4bb6b.akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-02-13[PATCH] x86: fix laptop bootup hang in init_acpi()Ingo Molnar
During kernel bootup, a new T60 laptop (CoreDuo, 32-bit) hangs about 10%-20% of the time in acpi_init(): Calling initcall 0xc055ce1a: topology_init+0x0/0x2f() Calling initcall 0xc055d75e: mtrr_init_finialize+0x0/0x2c() Calling initcall 0xc05664f3: param_sysfs_init+0x0/0x175() Calling initcall 0xc014cb65: pm_sysrq_init+0x0/0x17() Calling initcall 0xc0569f99: init_bio+0x0/0xf4() Calling initcall 0xc056b865: genhd_device_init+0x0/0x50() Calling initcall 0xc056c4bd: fbmem_init+0x0/0x87() Calling initcall 0xc056dd74: acpi_init+0x0/0x1ee() It's a hard hang that not even an NMI could punch through! Frustratingly, adding printks or function tracing to the ACPI code made the hangs go away ... After some time an additional detail emerged: disabling the NMI watchdog made these occasional hangs go away. So i spent the better part of today trying to debug this and trying out various theories when i finally found the likely reason for the hang: if acpi_ns_initialize_devices() executes an _INI AML method and an NMI happens to hit that AML execution in the wrong moment, the machine would hang. (my theory is that this must be some sort of chipset setup method doing stores to chipset mmio registers?) Unfortunately given the characteristics of the hang it was sheer impossible to figure out which of the numerous AML methods is impacted by this problem. As a workaround i wrote an interface to disable chipset-based NMIs while executing _INI sections - and indeed this fixed the hang. I did a boot-loop of 100 separate reboots and none hung - while without the patch it would hang every 5-10 attempts. Out of caution i did not touch the nmi_watchdog=2 case (it's not related to the chipset anyway and didnt hang). I implemented this for both x86_64 and i686, tested the i686 laptop both with nmi_watchdog=1 [which triggered the hangs] and nmi_watchdog=2, and tested an Athlon64 box with the 64-bit kernel as well. Everything builds and works with the patch applied. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2006-12-07[PATCH] x86: all cpu backtraceAndrew Morton
When a spinlock lockup occurs, arrange for the NMI code to emit an all-cpu backtrace, so we get to see which CPU is holding the lock, and where. Cc: Andi Kleen <ak@muc.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-29[PATCH] Make touch_nmi_watchdog imply touch_softlockup_watchdog on all archsMichal Schmidt
touch_nmi_watchdog() calls touch_softlockup_watchdog() on both architectures that implement it (i386 and x86_64). On other architectures it does nothing at all. touch_nmi_watchdog() should imply touch_softlockup_watchdog() on all architectures. Suggested by Andi Kleen. [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz> Cc: Andi Kleen <ak@muc.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Schmidt <xschmi00@stud.feec.vutbr.cz> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!