Age | Commit message (Collapse) | Author | |
---|---|---|---|
2009-06-17 | md: fix some comments. | Andre Noll | |
1/ Raid5 has learned to take over also raid4 and raid6 arrays. 2/ new_chunk in mdp_superblock_1 is in sectors, not bytes. Signed-off-by: NeilBrown <neilb@suse.de> | |||
2009-01-30 | headers_check fix: raid/md_p.h | Jaswinder Singh Rajput | |
fix the following 'make headers_check' warning: usr/include/linux/raid/md_p.h:85: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> | |||
2009-01-08 | md: need another print_sb for mdp_superblock_1 | Cheng Renquan | |
md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de> | |||
2008-07-11 | md: Remove some unused macros. | Andre Noll | |
Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Neil Brown <neilb@suse.de> | |||
2006-10-21 | [PATCH] md: endian annotation for v1 superblock access | NeilBrown | |
Includes a couple of bugfixes found by sparse. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2006-06-26 | [PATCH] md: allow checkpoint of recovery with version-1 superblock | NeilBrown | |
For a while we have had checkpointing of resync. The version-1 superblock allows recovery to be checkpointed as well, and this patch implements that. Due to early carelessness we need to add a feature flag to signal that the recovery_offset field is in use, otherwise older kernels would assume that a partially recovered array is in fact fully recovered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2006-04-11 | [PATCH] md: make sure 64bit fields in version-1 metadata are 64-bit aligned | NeilBrown | |
reshape_position is a 64bit field that was not 64bit aligned. So swap with new_level. NOTE: this is a user-visible change. However: - The bad code has not appeared in a released kernel - This code is still marked 'experimental' - This only affects version-1 superblock, which are not in wide use - These field are only used (rather than simply reported) by user-space tools in extemely rare circumstances : after a reshape crashes in the first second of the reshape process. So I believe that, at this stage, the change is safe. Especially if people heed the 'help' message on use mdadm-2.4.1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2006-03-27 | [PATCH] md: Checkpoint and allow restart of raid5 reshape | NeilBrown | |
We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2005-09-09 | [PATCH] md: allow md to load a superblock with feature-bit '1' set | NeilBrown | |
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2005-09-09 | [PATCH] md: support write-mostly device in raid1 | NeilBrown | |
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2005-06-22 | [PATCH] Two small fixes for md verion-1 superblocks. | NeilBrown | |
1/ Must typecast int to (sector_t) before inverting or we might not invert enough bits. 2/ When "bitmap_offset" was added to mdp_superblock_1, we didn't increase the count of words-used (96 to 100). Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2005-06-22 | [PATCH] md: allow md intent bitmap to be stored near the superblock. | NeilBrown | |
This provides an alternate to storing the bitmap in a separate file. The bitmap can be stored at a given offset from the superblock. Obviously the creator of the array must make sure this doesn't intersect with data.... After is good for version-0.90 superblocks. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | |||
2005-04-16 | Linux-2.6.12-rc2 | Linus Torvalds | |
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! |