summaryrefslogtreecommitdiff
path: root/include/linux/tty.h
AgeCommit message (Collapse)Author
2011-05-13n_tracerouter and n_tracesink ldisc additions.J Freyensee
The n_tracerouter and n_tracesink line discpline drivers use the Linux tty line discpline framework to route trace data coming from a tty port (say UART for example) to the trace sink line discipline driver and to another tty port(say USB). Those these two line discipline drivers can be used together, independently from pti.c, they are part of the original implementation solution of the MIPI P1149.7, compact JTAG, PTI solution for Intel mobile platforms starting with the Medfield platform. Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19TTY: introduce deinit helpers for proper ldisc shutdownJiri Slaby
Introduce deinitialize_tty_struct which should be called after initialize_tty_struct and before successfull tty_ldisc_setup. It calls tty_ldisc_deinit which is opposite of tty_ldisc_init. It only puts a reference to ldisc and assigns NULL to tty->ldisc. It will be used to shut down ldisc when tty_release cannot be called yet. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-22tty: stop using "delayed_work" in the tty layerLinus Torvalds
Using delayed-work for tty flip buffers ends up causing us to wait for the next tick to complete some actions. That's usually not all that noticeable, but for certain latency-critical workloads it ends up being totally unacceptable. As an extreme case of this, passing a token back-and-forth over a pty will take two ticks per iteration, so even just a thousand iterations will take 8 seconds assuming a common 250Hz configuration. Avoiding the whole delayed work issue brings that ping-pong test-case down to 0.009s on my machine. In more practical terms, this latency has been a performance problem for things like dive computer simulators (simulating the serial interface using the ptys) and for other environments (Alan mentions a CP/M emulator). Reported-by: Jef Driesen <jefdriesen@telenet.be> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-17tty: add a helper for setting termios data from kernel sideAlan Cox
This basically encapsulates the small bit of locking knowledge needed. While we are at it make sure we blow up on any more abusers and unsafe misuses of ioctl for this kind of stuff. We change the function to return an argument as at some point it needs to honour the POSIX 'I asked for changes but got none of them' error reporting corner case. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: fix build error in vt_ioctl.c if CONFIG_COMPAT is enabledGreg Kroah-Hartman
This was caused by the previous patch to remove the file pointer from the tty ioctl handler. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: now phase out the ioctl file pointer for goodAlan Cox
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-02Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: adjust the baud rate setting TTY: open/hangup race fixup TTY: don't allow reopen when ldisc is changing NET: wan/x25, fix ldisc->open retval TTY: ldisc, fix open flag handling serial8250: Mark console as CON_ANYTIME
2010-11-29TTY: open/hangup race fixupJiri Slaby
Like in the "TTY: don't allow reopen when ldisc is changing" patch, this one fixes a TTY WARNING as described in the option 1) there: 1) __tty_hangup from tty_ldisc_hangup to tty_ldisc_enable. During this section tty_lock is held. However tty_lock is temporarily dropped in the middle of the function by tty_ldisc_hangup. The fix is to introduce a new flag which we set during the unlocked window and check it in tty_reopen too. The flag is TTY_HUPPING and is cleared after TTY_HUPPED is set. While at it, remove duplicate TTY_HUPPED set_bit. The one after calling ops->hangup seems to be more correct. But anyway, we hold tty_lock, so there should be no difference. Also document the function it does that kind of crap. Nicely reproducible with two forked children: static void do_work(const char *tty) { if (signal(SIGHUP, SIG_IGN) == SIG_ERR) exit(1); setsid(); while (1) { int fd = open(tty, O_RDWR|O_NOCTTY); if (fd < 0) continue; if (ioctl(fd, TIOCSCTTY)) continue; if (vhangup()) continue; close(fd); } exit(0); } Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: <Valdis.Kletnieks@vt.edu> Reported-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-09tty: Fix formatting in tty.hAlan Cox
Someone added a new ldisc number and messed up the tabbing. Fix it before anyone else copies it. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-30audit: Call tty_audit_push_task() outside preempt disabledThomas Gleixner
While auditing all tasklist_lock read_lock sites I stumbled over the following call chain: audit_prepare_user_tty() read_lock(&tasklist_lock); tty_audit_push_task(); mutex_lock(&buf->mutex); --> buf->mutex is locked with preemption disabled. Solve this by acquiring a reference to the task struct under rcu_read_lock and call tty_audit_push_task outside of the preempt disabled region. Move all code which needs to be protected by sighand lock into tty_audit_push_task() and use lock/unlock_sighand as we do not hold tasklist_lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28Merge 'staging-next' to Linus's treeGreg Kroah-Hartman
This merges the staging-next tree to Linus's tree and resolves some conflicts that were present due to changes in other trees that were affected by files here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22tty: Remove __GFP_NOFAIL from tty_add_file()Pekka Enberg
This patch removes __GFP_NOFAIL use from tty_add_file() and adds proper error handling to the call-sites of the function. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22tty: add tty_struct->dev pointer to corresponding device instanceDmitry Eremin-Solenikov
Some device drivers (mostly tty line disciplines) would like to have way know a struct device instance corresponding to passed tty_struct. Add a struct device pointer to struct tty_struct and populate it during initialize_tty_struct(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05tty.h: new ldisc for TI WiLink STPavan Savoy
Texas Instrument's WiLink7 connectivity devices pack wireless connectivity technologies like Bluetooth, FM Radio Receiver and Transmitter, GPS and WLAN into a single die. The BT, FM and GPS core on the chip are interfaced to application processors via a single UART. This line discipline driver allows such different technologies to be used simultaneous and independent of each other. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-18tty: fix fu_list abuseNick Piggin
tty: fix fu_list abuse tty code abuses fu_list, which causes a bug in remount,ro handling. If a tty device node is opened on a filesystem, then the last link to the inode removed, the filesystem will be allowed to be remounted readonly. This is because fs_may_remount_ro does not find the 0 link tty inode on the file sb list (because the tty code incorrectly removed it to use for its own purpose). This can result in a filesystem with errors after it is marked "clean". Taking idea from Christoph's initial patch, allocate a tty private struct at file->private_data and put our required list fields in there, linking file and tty. This makes tty nodes behave the same way as other device nodes and avoid meddling with the vfs, and avoids this bug. The error handling is not trivial in the tty code, so for this bugfix, I take the simple approach of using __GFP_NOFAIL and don't worry about memory errors. This is not a problem because our allocator doesn't fail small allocs as a rule anyway. So proper error handling is left as an exercise for tty hackers. [ Arguably filesystem's device inode would ideally be divorced from the driver's pseudo inode when it is opened, but in practice it's not clear whether that will ever be worth implementing. ] Cc: linux-kernel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18fs: cleanup files_lock lockingNick Piggin
fs: cleanup files_lock locking Lock tty_files with a new spinlock, tty_files_lock; provide helpers to manipulate the per-sb files list; unexport the files_lock spinlock. Cc: linux-kernel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10tty: implement BTM as mutex instead of BKLArnd Bergmann
The tty locking now follows the rules for mutexes, so we can replace the BKL usage with a new subsystem wide mutex. Using a regular mutex here will change the behaviour when blocked on the BTM from spinning to sleeping, but that should not be visible to the user. Using the mutex also means that all the BTM is now covered by lockdep. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: remove tty_lock_nestedArnd Bergmann
This changes all remaining users of tty_lock_nested to be non-recursive, which lets us kill this function. As a consequence, we won't need to keep the lock count any more, which allows more simplifications later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: introduce wait_event_interruptible_ttyArnd Bergmann
Calling wait_event_interruptible implicitly releases the BKL when it sleeps, but we need to do this explcitly when we have converted it to a mutex. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: replace BKL with a new tty_lockArnd Bergmann
As a preparation for replacing the big kernel lock in the TTY layer, wrap all the callers in new macros tty_lock, tty_lock_nested and tty_unlock. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: Add EXTPROC support for LINEMODEhyc@symas.com
This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-06Fix init ordering of /dev/console vs callers of modprobeDavid Howells
Make /dev/console get initialised before any initialisation routine that invokes modprobe because if modprobe fails, it's going to want to open /dev/console, presumably to write an error message to. The problem with that is that if the /dev/console driver is not yet initialised, the chardev handler will call request_module() to invoke modprobe, which will fail, because we never compile /dev/console as a module. This will lead to a modprobe loop, showing the following in the kernel log: request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 This can happen, for example, when the built in md5 module can't find the built in cryptomgr module (because the latter fails to initialise). The md5 module comes before the call to tty_init(), presumably because 'crypto' comes before 'drivers' alphabetically. Fix this by calling tty_init() from chrdev_init(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21tty: n_gsm line disciplineAlan Cox
Add an implementation of GSM 0710 MUX. The implementation currently supports - Basic and advanced framing (as either end of the link) - UI or UIH data frames - Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists) - Modem and control messages including the correct retry process - Flow control and exposes the MUX channels as a set of virtual tty devices including modem signals. This is an experimental driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: TTY: new ldiscs for stagingPavan Savoy
Push the max ldiscs by a few number to allow ldiscs to exist in the staging directory and elsewhere. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-03-31net-caif-driver: add CAIF serial driver (ldisc)Sjur Braendeland
Add CAIF Serial driver. This driver is implemented as a line discipline. caif_serial uses the following module parameters: ser_use_stx - specifies if STart of frame eXtension is in use. ser_loop - sets the interface in loopback mode. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19tty_port,usb-console: Fix usb serial console open/close regressionJason Wessel
Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty: Take a 256 byte padding into account when buffering below sub-page unitsMel Gorman
The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-12ldisc n_tty: add new method n_tty_inherit_ops()Rodolfo Giometti
This new method can be used to init a new struct tty_ldisc_ops as the default tty_ldisc_N_TTY struct. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02tty: Keep the default buffering to sub-page unitsAlan Cox
We allocate during interrupts so while our buffering is normally diced up small anyway on some hardware at speed we can pressure the VM excessively for page pairs. We don't really need big buffers to be linear so don't try so hard. In order to make this work well we will tidy up excess callers to request_room, which cannot itself enforce this break up. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-16tty.h: make tty_port_get() static inlineRandy Dunlap
I get a few dozen of these warnings when using gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2): In file included from mmotm-2010-0113-1217/init/do_mounts.c:5: mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get': mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static so make the function static inline. [akpm@linux-foundation.org: may as well convert tty_port_users() also] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15vt: introduce and use vt_kmsg_redirect() functionBernhard Walle
The kernel offers with TIOCL_GETKMSGREDIRECT ioctl() the possibility to redirect the kernel messages to a specific console. However, since it's not possible to switch to the kernel message console after a panic(), it would be nice if the kernel would print the panic message on the current console. This patch series adds a new interface to access the global kmsg_redirect variable by a function to be able to use it in code where CONFIG_VT_CONSOLE is not set (kernel/panic.c). This patch: Instead of using and exporting a global value kmsg_redirect, introduce a function vt_kmsg_redirect() that both can set and return the console where messages are printed. Change all users of kmsg_redirect (the VT code itself and kernel/power.c) to the new interface. The main advantage is that vt_kmsg_redirect() can also be used when CONFIG_VT_CONSOLE is not set. Signed-off-by: Bernhard Walle <bernhard@bwalle.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-11tty: push the BKL down into the handlers a bitAlan Cox
Start trying to untangle the remaining BKL mess Updated to fix missing unlock_kernel noted by Dan Carpenter Signed-off-by: Alan "I must be out of my tree" Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: tty_port: Add a kref object to the tty portAlan Cox
Users of tty port need a way to refcount ports when hotplugging is involved. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: tty_port: Change the buffer allocator lockingAlan Cox
We want to be able to do this without regard for the activate/own open method being used which causes a problem using port->mutex. Add another mutex for now. Once everything uses port_open to do buffer allocs we can kill it back off Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty_port: add "tty_port_open" helperAlan Cox
For the moment this just moves the USB logic over and fixes the 'what if we open and hangup at the same time' race noticed by Oliver Neukum. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: handle VT specific compat ioctls in vt driverArnd Bergmann
The VT specific compat_ioctl handlers are the only ones in common code that require the BKL. Moving them into the vt driver lets us remove the BKL from the other handlers and cleans up the code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move port users helperAlan Cox
This little helper is now tty_port specific and useful generally so move it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move delta_msr_wait into the tty_portAlan Cox
This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: Fold closing_* fields into the tty_port onesAlan Cox
Remove some more serial specific use Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: Add a full port_close functionAlan Cox
Now we are extracting out methods for shutdown and the like we can add a proper tty_port_close method that knows all the innards of the tty closing process and hides the lot from the caller. At some point in the future this will be paired with a similar open() helper and the drivers can stick to hardware management. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15cleanup console_print()Anirban Sinha
console_print() is an old legacy interface mostly unused in the entire kernel tree. It's best to clean up its existing use and let developers use their own implementation of it as they feel fit. Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-10Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: (226 commits) ASoC: au1x: PSC-AC97 bugfixes ASoC: Fix WM835x Out4 capture enumeration ASoC: Remove unuused hw_read_t ASoC: fix pxa2xx-ac97.c breakage ASoC: Fully specify DC servo bits to update in wm_hubs ASoC: Debugged improper setting of PLL fields in WM8580 driver ASoC: new board driver to connect bfin-5xx with ad1836 codec ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI ASoC: davinci: i2c device creation moved into board files ASoC: Don't reconfigure WM8350 FLL if not needed ASoC: Fix s3c-i2s-v2 build ASoC: Make platform data optional for TLV320AIC3x ASoC: Add S3C24xx dependencies for Simtec machines ASoC: SDP3430: Fix TWL GPIO6 pin mux request ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI OMAP: McBSP: Use textual values in DMA operating mode sysfs files ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 ASoC: Select core DMA when building for S3C64xx ...
2009-08-07TTY/ASoC: Rename N_AMSDELTA line discipline to N_V253Janusz Krzysztofik
The patch changes the line discipline name registered in include/linux/tty.h and updates the ams-delta machine driver to use it. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ↵Janusz Krzysztofik
ASoC driver This patch adds new line discipline name an number to include/linux/tty.h. The line discipline will be used by the Amstrad E3 (Delta) sound driver that will come next in this series of patches. Created against linux-2.6.31-rc3. Applies to linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29pty: avoid forcing 'low_latency' tty flagOGAWA Hirofumi
We really don't want to mark the pty as a low-latency device, because as Alan points out, the ->write method can be called from an IRQ (ppp?), and that means we can't use ->low_latency=1 as we take mutexes in the low_latency case. So rather than using low_latency to force the written data to be pushed to the ldisc handling at 'write()' time, just make the reader side (or the poll function) do the flush when it checks whether there is data to be had. This also fixes the problem with lost data in an emacs compile buffer (bugzilla 13815), and we can thus revert the low_latency pty hack (commit 3a54297478e6578f96fd54bf4daa1751130aca86: "pty: quickfix for the pty ENXIO timing problems"). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ Modified to do the tty_flush_to_ldisc() inside input_available_p() so that it triggers for both read and poll() - Linus] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: rewrite the ldisc lockingAlan Cox
There are several pretty much unfixable races in the old ldisc code, especially with respect to pty behaviour and also to hangup. It's easier to rewrite the code than simply try and patch it up. This patch - splits the ldisc from the tty (so we will be able to refcount it more cleanly later) - introduces a mutex lock for ldisc changing on an active device - fixes the complete mess that hangup caused - implements hopefully correct setldisc/close/hangup locking There are still some problems around pty pairs that have always been there but at least it is now possible to understand the code and fix further problems. This fixes the following known bugs - hang up can leak ldisc references - hang up may not call open/close on ldisc in a matched way - pty/tty pairs can deadlock during an ldisc change - reading the ldisc proc files can cause every ldisc to be loaded and probably a few other of the mysterious ldisc race reports. I'm sure it also adds the odd new one. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Extract various bits of ldisc codeAlan Cox
Before trying to tackle the ldisc bugs the code needs to be a good deal more readable, so do the simple extractions of routines first. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Implement a drain delay in the tty portAlan Cox
We need this for devices that cannot flush and wait, but which do not order data and modem events. Without it we will hang up before all the data clears the hardware. Needed for the USB changes. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>