summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2011-03-22[media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_tPawel Osciak
dma_addr_t may not fit into void* on some architectures. To be safe, make vb2_dma_contig_cookie() return a pointer to dma_addr_t and dereference it in vb2_dma_contig_plane_paddr() back to dma_addr_t. Signed-off-by: Pawel Osciak <pawel@osciak.com> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: soc-camera: Store negotiated buffer settingsSergio Aguirre
This fixes the problem in which a host driver sets a personalized sizeimage or bytesperline field, and gets ignored when doing G_FMT. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] rc/keymaps: Rename Hauppauge table as rc-hauppaugeMauro Carvalho Chehab
There are two "hauppauge-new" keymaps, one with protocol unknown, and the other with the protocol marked accordingly. However, both tables are miss-named. Also, the old rc-hauppauge-new is broken, as it mixes three different controllers as if they were just one. This patch solves half of the problem by renaming the correct keycode table as just rc-hauppauge. This table contains the codes for the four different types of remote controllers found on Hauppauge cards, properly mapped with their different addresses. create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [Jarod: fix up RC_MAP_HAUPPAUGE defines] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22[media] v4l2: use new flag to enable core priority handlingHans Verkuil
Rather than guess which driver supports core priority handling, require drivers that do to explicitly set the V4L2_FL_USE_FH_PRIO flag in video_device. Updated the core prio handling accordingly and set the flag in the three drivers that do. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-device: add kref and a release functionHans Verkuil
The video_device struct has proper ref counting and its release function will be called when the last user releases it. But no such support was available for struct v4l2_device. This made it hard to determine when a USB driver can release the device if it has multiple device nodes. With one device node it is easy of course, since when the device node is released, the whole device can be released. This patch adds refcounting to v4l2_device. When registering device nodes the v4l2_device refcount will be increased, when releasing device nodes it will be decreased. The (optional) release function will be called when the last device node was released. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-ioctl: add priority handling supportHans Verkuil
Drivers that use v4l2_fh can now use the core framework support of g/s_priority. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-fh: add v4l2_fh_is_singularHans Verkuil
Several drivers need to do something when the first filehandle is opened or the last filehandle is closed. Most implement some use count mechanism, but if they use v4l2_fh, then you can also just check if this is the only filehandle for the device node. A simple helper function can do this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-fh: add v4l2_fh_open and v4l2_fh_release helper functionsHans Verkuil
Add two new functions: v4l2_fh_open allocates and initializes a struct v4l2_fh based on a struct file pointer and v4l2_fh_release releases and frees a struct v4l2_fh. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2-fh: implement v4l2_priority supportHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2: add v4l2_prio_state to v4l2_device and video_deviceHans Verkuil
Integrate the v4l2_prio_state into the core, ready for use. One struct v4l2_prio_state is added to v4l2_device and a pointer to a prio state is added to video_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l2_prio: move from v4l2-common to v4l2-devHans Verkuil
We are going to move priority handling into the v4l2 core. As a consequence the v4l2_prio helper functions need to be moved into the core videodev module as well to prevent circular dependencies. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Update Pawel Osciak's e-mail addressPawel Osciak
Signed-off-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] add TerraTec remoteAntti Palosaari
Remote used for TerraTec Cinergy T Stick RC. Keytable from Martin Groszhauser <mgroszhauser@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: Martin Groszhauser <mgroszhauser@gmail.com> Cc: TerraTux <TerraTux@terratec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Add a platform data entry for MIPI-CSI data alignmentSylwester Nawrocki
Allow the MIPI-CSI data alignment to be defined in the board setup as it may be different across various camera sensors. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Allow defining number of sensors at runtimeSylwester Nawrocki
Add num_clients field to struct s5p_fimc_isp_info to define exactly size of clients array which simplifies a bit the sensors management. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add subdev sensor g_skip_frames operationLaurent Pinchart
Some buggy sensors generate corrupt frames when the stream is started. This new operation return the number of corrupt frames to skip when starting the stream. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace crop APIAntti Koskipaa
This patch adds the VIDIOC_SUBDEV_S_CROP and G_CROP ioctls to the userland API. CROPCAP is not implemented because it's redundant. Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace frame interval APILaurent Pinchart
The three new ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, VIDIOC_SUBDEV_G_FRAME_INTERVAL and VIDIOC_SUBDEV_S_FRAME_INTERVAL can be used to enumerate and configure a subdev's frame rate from userspace. Two new video::g/s_frame_interval subdev operations are introduced to support those ioctls. The existing video::g/s_parm operations are deprecated and shouldn't be used anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace format APILaurent Pinchart
Add a userspace API to get, set and enumerate the media format on a subdev pad. The format at the output of a subdev usually depends on the format at its input(s). The try format operation is thus not suitable for probing format at individual pads, as it can't modify the device state and thus can't remember the format tried at the input to compute the output format. To fix the problem, pass an extra argument to the get/set format operations to select the 'try' or 'active' format. The try format is used when probing the subdev. Setting the try format must not change the device configuration but can store data for later reuse. Data storage is provided at the file-handle level so applications probing the subdev concurently won't interfere with each other. The active format is used when configuring the subdev. It's identical to the format handled by the usual get/set operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev pad-level operationsLaurent Pinchart
Add a v4l2_subdev_pad_ops structure for the operations that need to be performed at the pad level such as format-related operations. Pad format-related operations use v4l2_mbus_framefmt instead of v4l2_format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: subdev: Add new file operationsLaurent Pinchart
V4L2 sub-devices store pad formats and crop settings in the file handle. To let drivers initialize those settings properly, add an open operation that is called when the subdev is opened as well as a corresponding close operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Create v4l2 subdev file handle structureStanimir Varbanov
Used for storing subdev information per file handle and hold V4L2 file handle. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Move the media/v4l2-mediabus.h header to include/linuxLaurent Pinchart
The header defines the v4l2_mbus_framefmt structure which will be used by the V4L2 subdevs userspace API. Change the type of the v4l2_mbus_framefmt::code field to __u32, as enum sizes can differ between different ABIs on the same architectures. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make v4l2_subdev inherit from media_entityLaurent Pinchart
V4L2 subdevices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the subdevice, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make video_device inherit from media_entityLaurent Pinchart
V4L2 devices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the device, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add a media_device pointer to the v4l2_device structureLaurent Pinchart
The pointer will later be used to register/unregister media entities when registering/unregistering a v4l2_subdev or a video_device. With the introduction of media devices, device drivers need to store a pointer to a driver-specific structure in the device's drvdata. v4l2_device can't claim ownership of the drvdata anymore. To maintain compatibility with drivers that rely on v4l2_device storing a pointer to itself in the device's drvdata, v4l2_device_register() will keep doing so if the drvdata is NULL. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Pipelines and media streamsLaurent Pinchart
Drivers often need to associate pipeline objects to entities, and to take stream state into account when configuring entities and links. The pipeline API helps drivers manage that information. When starting streaming, drivers call media_entity_pipeline_start(). The function marks all entities connected to the given entity through enabled links, either directly or indirectly, as streaming. Similarly, when stopping the stream, drivers call media_entity_pipeline_stop(). The media_entity_pipeline_start() function takes a pointer to a media pipeline and stores it in every entity in the graph. Drivers should embed the media_pipeline structure in higher-level pipeline structures and can then access the pipeline through the media_entity structure. Link configuration will fail with -EBUSY by default if either end of the link is a streaming entity, unless the link is marked with the MEDIA_LNK_FL_DYNAMIC flag. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Links setupLaurent Pinchart
Create the following ioctl and implement it at the media device level to setup links. - MEDIA_IOC_SETUP_LINK: Modify the properties of a given link The only property that can currently be modified is the ENABLED link flag to enable/disable a link. Links marked with the IMMUTABLE link flag can not be enabled or disabled. Enabling or disabling a link has effects on entities' use count. Those changes are automatically propagated through the graph. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Entities, pads and links enumerationLaurent Pinchart
Create the following two ioctls and implement them at the media device level to enumerate entities, pads and links. - MEDIA_IOC_ENUM_ENTITIES: Enumerate entities and their properties - MEDIA_IOC_ENUM_LINKS: Enumerate all pads and links for a given entity Entity IDs can be non-contiguous. Userspace applications should enumerate entities using the MEDIA_ENT_ID_FLAG_NEXT flag. When the flag is set in the entity ID, the MEDIA_IOC_ENUM_ENTITIES will return the next entity with an ID bigger than the requested one. Only forward links that originate at one of the entity's source pads are returned during the enumeration process. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Entity use countLaurent Pinchart
Due to the wide differences between drivers regarding power management needs, the media controller does not implement power management. However, the media_entity structure includes a use_count field that media drivers can use to track the number of users of every entity for power management needs. The use_count field is owned by media drivers and must not be touched by entity drivers. Access to the field must be protected by the media device graph_mutex lock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Entity graph traversalSakari Ailus
Add media entity graph traversal. The traversal follows enabled links by depth first. Traversing graph backwards is prevented by comparing the next possible entity in the graph with the previous one. Multiply connected graphs are thus not supported. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Entities, pads and linksLaurent Pinchart
As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Media deviceLaurent Pinchart
The media_device structure abstracts functions common to all kind of media devices (v4l2, dvb, alsa, ...). It manages media entities and offers a userspace API to discover and configure the media device internal topology. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] media: Media device node supportLaurent Pinchart
The media_devnode structure provides support for registering and unregistering character devices using a dynamic major number. Reference counting is handled internally, making device drivers easier to write without having to solve the open/disconnect race condition issue over and over again. The code is based on video/v4l2-dev.c. [mchehab@redhat.com: Remove linux/smp_lock.h include to not break compilation on bisect] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Events supportSakari Ailus
Provide v4l2_subdevs with v4l2_event support. Subdev drivers only need very little to support events. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Uninline the v4l2_subdev_init functionLaurent Pinchart
The function isn't small or performance sensitive enough to be inlined. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Add device node supportLaurent Pinchart
Create a device node named subdevX for every registered subdev. As the device node is registered before the subdev core::s_config function is called, return -EGAIN on open until initialization completes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Don't require core operationsLaurent Pinchart
There's no reason to require subdevices to implement the core operations. Remove the check for non-NULL core operations when initializing the subdev. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: videobuf2: Typo fixLaurent Pinchart
vb2_get_plane_payload() gets the bytesused field for a plane, it doesn't set it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] Add proper audio support for Nova-S Plus with wm8775 ADCLawrence Rust
This patch adds audio DMA capture and ALSA mixer elements for the line input jack of the Hauppauge Nova-S-plus DVB-S PCI card. The Nova-S-plus has a WM8775 ADC that is currently not detected. This patch enables this chip and exports volume, balance mute and ALC elements for ALSA mixer controls. [mchehab@redhat.com: Changed the patch to only talk with wm8775 if board info says so. Also, added platform_data support, to avoid changing the behaviour for other boards, and fixed CodingStyle] [awalls@md.metrocast.net: Changed patch to make the WM8775_GID defintion bridge driver private and let the bridge driver set the value of v4l2_subdev.grp_id.] -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Andy Walls <awalls@md.metrocast.net>
2011-03-21[media] V4L: Initial submit of OV9740 driverAndrew Chew
This soc_camera driver is for Omnivision's OV9740 sensor. This initial submission provides support for YUV422 output at 1280x720 (720p), which is the sensor's native resolution. 640x480 (VGA) is also supported, with cropping and scaling performed by the sensor's ISP. This driver is heavily based off of the existing OV9640 driver. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] V4L: soc-camera: add helper functions for videobuf queue handlingGuennadi Liakhovetski
Add two helper inline functions to retrieve soc-camera device context from videobuf and videobuf2 queue pointers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] V4L: soc-camera: extend to also support videobuf2Guennadi Liakhovetski
Extend soc-camera core to also support the videobuf2 API. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] V4L: soc_mediabus: add a method to obtain the number of samples per ↵Alberto Panizzo
pixel Add a function to calculate the number of samples on the media-bus, required to retrieve one pixel of a certain format. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] V4L: soc-camera: add enum-frame-size ioctlQing Xu
add vidioc_enum_framesizes implementation, follow default_g_parm() and g_mbus_fmt() method Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] V4L: add enum_mbus_fsizes video operationQing Xu
Add enum_mbus_fsizes V4L2 subdevice video operation. Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner: Remove remaining usages of T_DIGITAL_TVMauro Carvalho Chehab
A few places used T_DIGITAL_TV internally. Remove the usage of this obsolete mode mask. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] Remove the remaining usages for T_STANDBYMauro Carvalho Chehab
tda9887 used to use the T_STANDBY type internally, while tea5761 used it to put the device to sleep. Fix the code for it to work properly with the tuner core changes and remove this flag from tuner.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Better implement standby modeMauro Carvalho Chehab
In the past, T_STANDBY were used on devices with a separate radio tuner to mark a tuner that were disabled. With the time, it got newer meanings. Also, due to a bug at the logic, the driver might incorrectly return T_STANDBY to userspace. So, instead of keeping the abuse, just use a boolean for storing such information. We can't remove T_STANDBY yet, as this is used on two other drivers. A latter patch will address its usage outside tuner-core. Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-simple: add support for Tena TNF5337 MFDMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>