summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2011-07-27[media] V4L: initial driver for ov5642 CMOS sensorBastian Hecht
This is an initial driver release for the Omnivision 5642 CMOS sensor. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: soc-camera: remove soc-camera bus and devices on itGuennadi Liakhovetski
Now that v4l2 subdevices have got their own device objects, having one more device in soc-camera clients became redundant and confusing. This patch removes those devices and the soc-camera bus, they used to reside on. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: soc-camera: un-export the soc-camera busGuennadi Liakhovetski
The soc-camera bus is now completely local again. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifierGuennadi Liakhovetski
This moves us one more step closer to eliminating the soc-camera bus and devices on it. Besides, as a side effect, CSI-2 runtime PM on sh-mobile secomes finer grained now: we only have to power on the interface, when the device nodes are open. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: add media bus configuration subdev operationsGuennadi Liakhovetski
Add media bus configuration types and two subdev operations to get supported mediabus configurations and to set a specific configuration. Subdevs can support several configurations, e.g., they can send video data on 1 or several lanes, can be configured to use a specific CSI-2 channel, in such cases subdevice drivers return bitmasks with all respective bits set. When a set-configuration operation is called, it has to specify a non-ambiguous configuration. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: soc-camera: remove now unused soc-camera specific PM hooksGuennadi Liakhovetski
soc-camera host drivers shall be implementing their PM, using standard kernel methods, soc-camera specific hooks can die. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l: add g_std_output callback to V4L2 subdevTomasz Stanislawski
Callback is used to acquire current analog TV standard from a subdev. It is used to avoid keeping current standard in top-level driver. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l: add g_dv_preset callback to V4L2 subdevTomasz Stanislawski
Callback is used to acquire current digital video preset from a subdev. It is used to avoid keeping dv preset in top-level driver. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l: add g_tvnorms_output callback to V4L2 subdevTomasz Stanislawski
Callback is used to acquire TV norms supported by a subdev. It is used to avoid having standards in top-level driver. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] rc-core support for Microsoft IR keyboard/mouseJarod Wilson
This is a custom IR protocol decoder, for the RC-6-ish protocol used by the Microsoft Remote Keyboard, apparently developed internally at Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and transceiver requirements and specifications document, which also touches on this IR keyboard/mouse device. Its a standard keyboard with embedded thumb stick mouse pointer and mouse buttons, along with a number of media keys. The media keys are standard RC-6, identical to the signals from the stock MCE remotes, and will be handled as such. The keyboard and mouse signals will be decoded and delivered to the system by an input device registered specifically by this driver. Successfully tested with multiple mceusb-driven transceivers, as well as with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware with enough sampling resolution should be able to use this decoder, nothing about it is at all receiver-hardware-specific. This work is inspired by lirc_mod_mce: The documentation there and code aided in understanding and decoding the protocol, but the bulk of the code is actually borrowed more from the existing in-kernel decoders than anything. I did recycle the keyboard keycode table, a few defines, and some of the keyboard and mouse data parsing bits from lirc_mod_mce though. Special thanks to James Meyer for providing the hardware, and being patient with me as I took forever to get around to writing this. callback routine to ensure we don't get any stuck keys, and used symbolic names for the keytable. Also cc'ing Florian this time, who I believe is the original mod-mce author... CC: Florian Demski <fdemski@users.sourceforge.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] adp1653: Add driver for LED flash controllerSakari Ailus
This patch adds the driver for the adp1653 LED flash controller. This controller supports a high power led in flash and torch modes and an indicator light, sometimes also called privacy light. The adp1653 is used on the Nokia N900. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David Cohen <dacohen@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-event.h: add overview documentation to the headerHans Verkuil
It's getting confusing who is linking to what, so add an overview at the start of the header. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls/v4l2-events: small coding style cleanupsHans Verkuil
Thanks to Laurent Pinchart <laurent.pinchart@ideasonboard.com>. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: improve discovery of controls of the same clusterHans Verkuil
The implementation of VIDIOC_G/S/TRY_EXT_CTRLS in the control framework has to figure out which controls in the control list belong to the same cluster. Since controls belonging to the same cluster need to be handled as a unit, this is important information. It did that by going over the controls in the list and for each control that belonged to a multi-control cluster it would walk the remainder of the list to try and find controls that belong to that same cluster. This approach has two disadvantages: 1) it was a potentially quadratic algorithm (although highly unlikely that it would ever be that bad in practice). 2) it took place with the control handler's lock held. Since we want to make it possible in the future to change control values from interrupt context, doing a lot of work while holding a lock is not a good idea. In the new code the algorithm is no longer quadratic but linear in the number of controls in the list. Also, it now can be done beforehand. Another change that was made was to so the try and set at the same time. Before when S_TRY_EXT_CTRLS was called it would 'try' the controls first, and then it would 'set' them. The idea was that any 'try' errors would prevent the 'set' from happening, thus avoiding having partially set control lists. However, this caused more problems than it solved because between the 'try' and the 'set' changes might have happened, so it had to try a second time, and since actual controls with a try_ctrl op are very rare (and those that we have just adjust values and do not return an error), I've decided to drop that two-stage approach and just combine try and set. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-event: add optional merge and replace callbacksHans Verkuil
When the event queue for a subscribed event is full, then the oldest event is dropped. It would be nice if the contents of that oldest event could be merged with the next-oldest. That way no information is lost, only intermediate steps are lost. This patch adds optional replace() (called when only one kevent was allocated) and merge() (called when more than one kevent was allocated) callbacks that will be called to do this job. These two callbacks are implemented for the V4L2_EVENT_CTRL event. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-event/ctrls/fh: allocate events per fh and per type instead of ↵Hans Verkuil
just per-fh The driver had to decide how many events to allocate when the v4l2_fh struct was created. It was possible to add more events afterwards, but there was no way to ensure that you wouldn't miss important events if the event queue would fill up for that filehandle. In addition, once there were no more free events, any new events were simply dropped on the floor. For the control event in particular this made life very difficult since control status/value changes could just be missed if the number of allocated events and the speed at which the application read events was too low to keep up with the number of generated events. The application would have no idea what the latest state was for a control since it could have missed the latest control change. So this patch makes some major changes in how events are allocated. Instead of allocating events per-filehandle they are now allocated when subscribing an event. So for that particular event type N events (determined by the driver) are allocated. Those events are reserved for that particular event type. This ensures that you will not miss events for a particular type altogether. In addition, if there are N events in use and a new event is raised, then the oldest event is dropped and the new one is added. So the latest event is always available. This can be further improved by adding the ability to merge the state of two events together, ensuring that no data is lost at all. This will be added in the next patch. This also makes it possible to allow the user to determine the number of events that will be allocated. This is not implemented at the moment, but would be trivial. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls/event: remove struct v4l2_ctrl_fh, instead use ↵Hans Verkuil
v4l2_subscribed_event The v4l2_ctrl_fh struct connected v4l2_ctrl with v4l2_fh so the control would know which filehandles subscribed to it. However, it is much easier to use struct v4l2_subscribed_event directly for that and get rid of that intermediate struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-events/fh: merge v4l2_events into v4l2_fhHans Verkuil
Drivers that supported events used to be rare, but now that controls can also raise events this will become much more common since almost all drivers have controls. This means that keeping struct v4l2_events as a separate struct make no more sense. Merging it into struct v4l2_fh simplifies things substantially as it is now an integral part of the filehandle struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: at91: add Atmel Image Sensor Interface (ISI) supportJosh Wu
This patch is to enable Atmel Image Sensor Interface (ISI) driver support. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: soc-camera: remove several now unused soc-camera client operationsGuennadi Liakhovetski
This patch removes .enum_input(), .suspend() and .resume() soc-camera client operations. Functionality, provided by .enum_input(), if needed, can be implemented using the v4l2-subdev API. As for .suspend() and .resume(), the only client driver, implementing these methods has been mt9m111, and the only host driver, using them has been pxa-camera. Now that both those drivers have been converted to the standard subdev .s_power() operation, .suspend() and .resume() can be removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] V4L: soc-camera: MIPI flags are not sensor flagsGuennadi Liakhovetski
SOCAM_MIPI_[1234]LANE flags are not board-specific sensor flags, they are bus configuration flags. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: make manual_mode_value 8 bits and check against control ↵Hans Verkuil
range Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: simplify event subscriptionHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: add control eventsHans Verkuil
Whenever a control changes value or state an event is sent to anyone that subscribed to it. This functionality is useful for control panels but also for applications that need to wait for (usually status) controls to change value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: add v4l2_fh pointer to the set control functionsHans Verkuil
When an application changes a control you want to generate an event. However, you want to avoid sending such an event back to the application (file handle) that caused the change. Add the filehandle to the various set control functions. The filehandle isn't used yet, but the control event patches will need this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: add v4l2_ctrl_auto_cluster to simplify autogain/gain ↵Hans Verkuil
scenarios It is a bit tricky to handle autogain/gain type scenerios correctly. Such controls need to be clustered and the V4L2_CTRL_FLAG_UPDATE should be set on the autofoo controls. In addition, the manual controls should be marked inactive when the automatic mode is on, and active when the manual mode is on. This also requires specialized volatile handling. The chances of drivers doing all these things correctly are pretty remote. So a new v4l2_ctrl_auto_cluster function was added that takes care of these issues. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ioctl: add ctrl_handler to v4l2_fhHans Verkuil
This is required to implement control events and is also needed to allow for per-filehandle control handlers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] davinci vpbe: VENC( Video Encoder) implementationManjunath Hadli
This patch adds the VENC or the Video encoder, which is responsible for the blending of all source planes and timing generation for Video modes like NTSC, PAL and other digital outputs. the VENC implementation currently supports COMPOSITE and COMPONENT outputs and NTSC and PAL resolutions through the analog DACs. The venc block is implemented as a subdevice, allowing for additional external and internal encoders of other kind to plug-in. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] davinci vpbe: OSD(On Screen Display) blockManjunath Hadli
This patch implements the functionality of the OSD block of the VPBE. The OSD in total supports 4 planes or Video sources - 2 mainly RGB and 2 Video. The patch implements general handling of all the planes, with specific emphasis on the Video plane capabilities as the Video planes are supported through the V4L2 driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] davinci vpbe: VPBE display driverManjunath Hadli
This patch implements the core functionality of the display driver, mainly controlling the VENC and other encoders, and acting as the one point interface for the main V4L2 driver. This implements the core of each of the V4L2 IOCTLs. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] davinci vpbe: V4L2 display driver for DM644X SoCManjunath Hadli
This is the display driver for Texas Instruments's DM644X family SoC. This patch contains the main implementation of the driver with the V4L2 interface. The driver implements the streaming model with support for both kernel allocated buffers and user pointers. It also implements all of the necessary IOCTLs necessary and supported by the video display device. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] radio-timb: Simplified platform dataRichard Röjfors
This patch simplifies the platform data slightly, by removing unused elements. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] marvell-cam: Basic working MMP camera driverJonathan Corbet
Now we have a camera working over the marvell cam controller core. It works like the cafe driver and has all the same limitations, contiguous DMA only being one of them. But it's a start. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] marvell-cam: Move cafe-ccic into its own directoryJonathan Corbet
This driver will soon become a family of drivers, so let's give it its own place to live. This move requires putting ov7670.h into include/media, but there are no code changes. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] rc-core: lirc use unsigned intDavid Härdeman
Durations can never be negative, so it makes sense to consistently use unsigned int for LIRC transmission. Contrary to the initial impression, this shouldn't actually change the userspace API. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] dib0700: add initial code for PCTV 340e by Davide FerriDavide Ferri
This is initial code written by Davide Ferri for the PCTV 340e, including a new xc4000 driver. I am checking in all the code unmodified, and making no assertions about its quality (other than confirming it compiles). [mchehab@redhat.com: rebased on the top of the current tree] Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Davide Ferri <davidef1986@gmail.com> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core/v4l2-subdev: document that the type field has to be filled inHans Verkuil
The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type field is filled in. Document this. The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] v4l2-subdev.h: remove unused s_mode tuner opHans Verkuil
s_mode is no longer used, so remove it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-11[media] m5mols: Use proper email address formatHeungJun, Kim
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-11[media] lirc_dev: store cdev in irctl, up maxdevsJarod Wilson
Store the cdev pointer in struct irctl, allocated dynamically as needed, rather than having a static array. At the same time, recycle some of the saved memory to nudge the maximum number of lirc devices supported up a ways -- its not that uncommon these days, now that we have the rc-core lirc bridge driver, to see a system with at least 4 raw IR receivers. (consider a mythtv backend with several video capture devices and the possible need for IR transmit hardware). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01[media] v4l: Fix media_entity_to_video_device macro argument nameLaurent Pinchart
The name 'entity' is used twice in the macro body, once as the macro argument, and once as a structure field name. This breaks compilation if the macro is called with its argument not named 'entity'. Fix this by renaming the macro argument '__e'. This should avoid namespace clashes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-26[media] Add missing include guard to header fileHans Petter Selasky
Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-25[media] Add support for M-5MOLS 8 Mega Pixel camera ISPHeungJun, Kim
Add I2C/V4L2 subdev driver for M-5MOLS integrated image signal processor with 8 Mega Pixel sensor. Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc: add locking to fix register/show raceJarod Wilson
When device_add is called in rc_register_device, the rc sysfs nodes show up, and there's a window in which ir-keytable can be launched via udev and trigger a show_protocols call, which runs without various rc_dev fields filled in yet. Add some locking around registration and store/show_protocols to prevent that from happening. The problem manifests thusly: [64692.957872] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [64692.957878] IP: [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core] [64692.957890] PGD 19cfc7067 PUD 19cfc6067 PMD 0 [64692.957894] Oops: 0000 [#1] SMP [64692.957897] last sysfs file: /sys/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/rc/rc2/protocols [64692.957902] CPU 3 [64692.957903] Modules linked in: redrat3(+) ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder rc_hauppauge ir_nec _decoder rc_core ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_mi di_event snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem pcsp kr tg3 snd_hwdep emu10k1_gp snd amd64_edac_mod gameport edac_core soundcore edac_mce_amd k8temp shpchp i2c_piix4 lm63 e100 mii uinput ipv6 raid0 rai d1 ata_generic firewire_ohci pata_acpi firewire_core crc_itu_t sata_svw pata_serverworks floppy radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: redrat3] [64692.957949] [64692.957952] Pid: 12265, comm: ir-keytable Tainted: G M W 2.6.39-rc6+ #2 empty empty/TYAN Thunder K8HM S3892 [64692.957957] RIP: 0010:[<ffffffffa036a4c1>] [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core] [64692.957962] RSP: 0018:ffff880194509e38 EFLAGS: 00010202 [64692.957964] RAX: 0000000000000000 RBX: ffffffffa036d1e0 RCX: ffffffffa036a47a [64692.957966] RDX: ffff88019a84d000 RSI: ffffffffa036d1e0 RDI: ffff88019cf2f3f0 [64692.957969] RBP: ffff880194509e68 R08: 0000000000000002 R09: 0000000000000000 [64692.957971] R10: 0000000000000002 R11: 0000000000001617 R12: ffff88019a84d000 [64692.957973] R13: 0000000000001000 R14: ffff8801944d2e38 R15: ffff88019ce5f190 [64692.957976] FS: 00007f0a30c9a720(0000) GS:ffff88019fc00000(0000) knlGS:0000000000000000 [64692.957979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [64692.957981] CR2: 0000000000000090 CR3: 000000019a8e0000 CR4: 00000000000006e0 [64692.957983] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [64692.957986] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [64692.957989] Process ir-keytable (pid: 12265, threadinfo ffff880194508000, task ffff88019a9fc720) [64692.957991] Stack: [64692.957992] 0000000000000002 ffffffffa036d1e0 ffff880194509f58 0000000000001000 [64692.957997] ffff8801944d2e38 ffff88019ce5f190 ffff880194509e98 ffffffff8131484b [64692.958001] ffffffff8118e923 ffffffff810e9b2f ffff880194509e98 ffff8801944d2e18 [64692.958005] Call Trace: [64692.958014] [<ffffffff8131484b>] dev_attr_show+0x27/0x4e [64692.958014] [<ffffffff8118e923>] ? sysfs_read_file+0x94/0x172 [64692.958014] [<ffffffff810e9b2f>] ? __get_free_pages+0x16/0x52 [64692.958014] [<ffffffff8118e94c>] sysfs_read_file+0xbd/0x172 [64692.958014] [<ffffffff8113205e>] vfs_read+0xac/0xf3 [64692.958014] [<ffffffff8113347b>] ? fget_light+0x3a/0xa1 [64692.958014] [<ffffffff811320f2>] sys_read+0x4d/0x74 [64692.958014] [<ffffffff814c19c2>] system_call_fastpath+0x16/0x1b Its a bit difficult to reproduce, but I'm fairly confident this has fixed the problem. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] Revert "V4L/DVB: v4l2-dev: remove get_unmapped_area"Bob Liu
This reverts commit c29fcff3daafbf46d64a543c1950bbd206ad8c1c. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] V4L: soc-camera: add a new packing for YUV 4:2:0 type formatsGuennadi Liakhovetski
12-bit formats, similar to YUV 4:2:0 occupy 3 bytes for each two pixels and cannot be described by any of the existing SOC_MBUS_PACKING_* macros. This patch adds a new one SOC_MBUS_PACKING_1_5X8 to describe such formats and extends soc_mbus_samples_per_pixel() to support it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] V4L: soc-camera: avoid huge arrays, caused by changed format codesGuennadi Liakhovetski
Recently mediabus pixel format codes have become a part of the user- space API, at which time their values also have been changed from contiguous numbers, running from 0 to sparse numbers with values around 0x1000, 0x2000, 0x3000... This made them unsuitable for the use as array indices. This patch switches soc-camera internal format look-ups to not depend on values of those macros. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] V4L: soc-camera: add MIPI bus flagsKassey Li
Signed-off-by: Kassey Lee <ygli@marvell.com> Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] V4L: soc-camera: add JPEG supportKassey Li
Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Kassey Lee <ygli@marvell.com> [g.liakhovetski@gmx.de: fixed compiler warning] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] V4L: soc-camera: add a livecrop host operationGuennadi Liakhovetski
Add an soc-camera host livecrop operation to implement live zoom. If a host driver implements it, it should take care to preserve output frame format, then live crop doesn't break streaming. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>