summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2012-08-01Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-08-01netvm: prevent a stream-specific deadlockMel Gorman
This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01netvm: set PF_MEMALLOC as appropriate during SKB processingMel Gorman
In order to make sure pfmemalloc packets receive all memory needed to proceed, ensure processing of pfmemalloc SKBs happens under PF_MEMALLOC. This is limited to a subset of protocols that are expected to be used for writing to swap. Taps are not allowed to use PF_MEMALLOC as these are expected to communicate with userspace processes which could be paged out. [a.p.zijlstra@chello.nl: Ideas taken from various patches] [jslaby@suse.cz: Lock imbalance fix] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01netvm: allow skb allocation to use PFMEMALLOC reservesMel Gorman
Change the skb allocation API to indicate RX usage and use this to fall back to the PFMEMALLOC reserve when needed. SKBs allocated from the reserve are tagged in skb->pfmemalloc. If an SKB is allocated from the reserve and the socket is later found to be unrelated to page reclaim, the packet is dropped so that the memory remains available for page reclaim. Network protocols are expected to recover from this packet loss. [a.p.zijlstra@chello.nl: Ideas taken from various patches] [davem@davemloft.net: Use static branches, coding style corrections] [sebastian@breakpoint.cc: Avoid unnecessary cast, fix !CONFIG_NET build] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01netvm: allow the use of __GFP_MEMALLOC by specific socketsMel Gorman
Allow specific sockets to be tagged SOCK_MEMALLOC and use __GFP_MEMALLOC for their allocations. These sockets will be able to go below watermarks and allocate from the emergency reserve. Such sockets are to be used to service the VM (iow. to swap over). They must be handled kernel side, exposing such a socket to user-space is a bug. There is a risk that the reserves be depleted so for now, the administrator is responsible for increasing min_free_kbytes as necessary to prevent deadlock for their workloads. [a.p.zijlstra@chello.nl: Original patches] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01net: introduce sk_gfp_atomic() to allow addition of GFP flags depending on ↵Mel Gorman
the individual socket Introduce sk_gfp_atomic(), this function allows to inject sock specific flags to each sock related allocation. It is only used on allocation paths that may be required for writing pages back to network storage. [davem@davemloft.net: Use sk_gfp_atomic only when necessary] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01memcg: rename config variablesAndrew Morton
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31ipv4: Properly purge netdev references on uncached routes.David S. Miller
When a device is unregistered, we have to purge all of the references to it that may exist in the entire system. If a route is uncached, we currently have no way of accomplishing this. So create a global list that is scanned when a network device goes down. This mirrors the logic in net/core/dst.c's dst_ifdown(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31ipv4: Cache routes in nexthop exception entries.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31ipv4: percpu nh_rth_output cacheEric Dumazet
Input path is mostly run under RCU and doesnt touch dst refcnt But output path on forwarding or UDP workloads hits badly dst refcount, and we have lot of false sharing, for example in ipv4_mtu() when reading rt->rt_pmtu Using a percpu cache for nh_rth_output gives a nice performance increase at a small cost. 24 udpflood test on my 24 cpu machine (dummy0 output device) (each process sends 1.000.000 udp frames, 24 processes are started) before : 5.24 s after : 2.06 s For reference, time on linux-3.5 : 6.60 s Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31ipv4: Restore old dst_free() behavior.Eric Dumazet
commit 404e0a8b6a55 (net: ipv4: fix RCU races on dst refcounts) tried to solve a race but added a problem at device/fib dismantle time : We really want to call dst_free() as soon as possible, even if sockets still have dst in their cache. dst_release() calls in free_fib_info_rcu() are not welcomed. Root of the problem was that now we also cache output routes (in nh_rth_output), we must use call_rcu() instead of call_rcu_bh() in rt_free(), because output route lookups are done in process context. Based on feedback and initial patch from David Miller (adding another call_rcu_bh() call in fib, but it appears it was not the right fix) I left the inet_sk_rx_dst_set() helper and added __rcu attributes to nh_rth_output and nh_rth_input to better document what is going on in this code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-30ipv4: remove rt_cache_rebuild_countEric Dumazet
After IP route cache removal, rt_cache_rebuild_count is no longer used. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-30net: ipv4: fix RCU races on dst refcountsEric Dumazet
commit c6cffba4ffa2 (ipv4: Fix input route performance regression.) added various fatal races with dst refcounts. crashes happen on tcp workloads if routes are added/deleted at the same time. The dst_free() calls from free_fib_info_rcu() are clearly racy. We need instead regular dst refcounting (dst_release()) and make sure dst_release() is aware of RCU grace periods : Add DST_RCU_FREE flag so that dst_release() respects an RCU grace period before dst destruction for cached dst Introduce a new inet_sk_rx_dst_set() helper, using atomic_inc_not_zero() to make sure we dont increase a zero refcount (On a dst currently waiting an rcu grace period before destruction) rt_cache_route() must take a reference on the new cached route, and release it if was not able to install it. With this patch, my machines survive various benchmarks. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26ipv6: Early TCP socket demuxEric Dumazet
This is the IPv6 missing bits for infrastructure added in commit 41063e9dd1195 (ipv4: Early TCP socket demux.) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26ipv4: Fix input route performance regression.David S. Miller
With the routing cache removal we lost the "noref" code paths on input, and this can kill some routing workloads. Reinstate the noref path when we hit a cached route in the FIB nexthops. With help from Eric Dumazet. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-23ipv4: Change rt->rt_iif encoding.David S. Miller
On input packet processing, rt->rt_iif will be zero if we should use skb->dev->ifindex. Since we access rt->rt_iif consistently via inet_iif(), that is the only spot whose interpretation have to adjust. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23ipv4: Prepare for change of rt->rt_iif encoding.David S. Miller
Use inet_iif() consistently, and for TCP record the input interface of cached RX dst in inet sock. rt->rt_iif is going to be encoded differently, so that we can legitimately cache input routes in the FIB info more aggressively. When the input interface is "use SKB device index" the rt->rt_iif will be set to zero. This forces us to move the TCP RX dst cache installation into the ipv4 specific code, and as well it should since doing the route caching for ipv6 is pointless at the moment since it is not inspected in the ipv6 input paths yet. Also, remove the unlikely on dst->obsolete, all ipv4 dsts have obsolete set to a non-zero value to force invocation of the check callback. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull the big VFS changes from Al Viro: "This one is *big* and changes quite a few things around VFS. What's in there: - the first of two really major architecture changes - death to open intents. The former is finally there; it was very long in making, but with Miklos getting through really hard and messy final push in fs/namei.c, we finally have it. Unlike his variant, this one doesn't introduce struct opendata; what we have instead is ->atomic_open() taking preallocated struct file * and passing everything via its fields. Instead of returning struct file *, it returns -E... on error, 0 on success and 1 in "deal with it yourself" case (e.g. symlink found on server, etc.). See comments before fs/namei.c:atomic_open(). That made a lot of goodies finally possible and quite a few are in that pile: ->lookup(), ->d_revalidate() and ->create() do not get struct nameidata * anymore; ->lookup() and ->d_revalidate() get lookup flags instead, ->create() gets "do we want it exclusive" flag. With the introduction of new helper (kern_path_locked()) we are rid of all struct nameidata instances outside of fs/namei.c; it's still visible in namei.h, but not for long. Come the next cycle, declaration will move either to fs/internal.h or to fs/namei.c itself. [me, miklos, hch] - The second major change: behaviour of final fput(). Now we have __fput() done without any locks held by caller *and* not from deep in call stack. That obviously lifts a lot of constraints on the locking in there. Moreover, it's legal now to call fput() from atomic contexts (which has immediately simplified life for aio.c). We also don't need anti-recursion logics in __scm_destroy() anymore. There is a price, though - the damn thing has become partially asynchronous. For fput() from normal process we are guaranteed that pending __fput() will be done before the caller returns to userland, exits or gets stopped for ptrace. For kernel threads and atomic contexts it's done via schedule_work(), so theoretically we might need a way to make sure it's finished; so far only one such place had been found, but there might be more. There's flush_delayed_fput() (do all pending __fput()) and there's __fput_sync() (fput() analog doing __fput() immediately). I hope we won't need them often; see warnings in fs/file_table.c for details. [me, based on task_work series from Oleg merged last cycle] - sync series from Jan - large part of "death to sync_supers()" work from Artem; the only bits missing here are exofs and ext4 ones. As far as I understand, those are going via the exofs and ext4 trees resp.; once they are in, we can put ->write_super() to the rest, along with the thread calling it. - preparatory bits from unionmount series (from dhowells). - assorted cleanups and fixes all over the place, as usual. This is not the last pile for this cycle; there's at least jlayton's ESTALE work and fsfreeze series (the latter - in dire need of fixes, so I'm not sure it'll make the cut this cycle). I'll probably throw symlink/hardlink restrictions stuff from Kees into the next pile, too. Plus there's a lot of misc patches I hadn't thrown into that one - it's large enough as it is..." * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits) ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file() btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file() switch dentry_open() to struct path, make it grab references itself spufs: shift dget/mntget towards dentry_open() zoran: don't bother with struct file * in zoran_map ecryptfs: don't reinvent the wheels, please - use struct completion don't expose I_NEW inodes via dentry->d_inode tidy up namei.c a bit unobfuscate follow_up() a bit ext3: pass custom EOF to generic_file_llseek_size() ext4: use core vfs llseek code for dir seeks vfs: allow custom EOF in generic_file_llseek code vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes vfs: Remove unnecessary flushing of block devices vfs: Make sys_sync writeout also block device inodes vfs: Create function for iterating over block devices vfs: Reorder operations during sys_sync quota: Move quota syncing to ->sync_fs method quota: Split dquot_quota_sync() to writeback and cache flushing part vfs: Move noop_backing_dev_info check from sync into writeback ...
2012-07-23tcp: dont drop MTU reduction indicationsEric Dumazet
ICMP messages generated in output path if frame length is bigger than mtu are actually lost because socket is owned by user (doing the xmit) One example is the ipgre_tunnel_xmit() calling icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); We had a similar case fixed in commit a34a101e1e6 (ipv6: disable GSO on sockets hitting dst_allfrag). Problem of such fix is that it relied on retransmit timers, so short tcp sessions paid a too big latency increase price. This patch uses the tcp_release_cb() infrastructure so that MTU reduction messages (ICMP messages) are not lost, and no extra delay is added in TCP transmits. Reported-by: Maciej Żenczykowski <maze@google.com> Diagnosed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23Merge branch 'kill_rtcache'David S. Miller
The ipv4 routing cache is non-deterministic, performance wise, and is subject to reasonably easy to launch denial of service attacks. The routing cache works great for well behaved traffic, and the world was a much friendlier place when the tradeoffs that led to the routing cache's design were considered. What it boils down to is that the performance of the routing cache is a product of the traffic patterns seen by a system rather than being a product of the contents of the routing tables. The former of which is controllable by external entitites. Even for "well behaved" legitimate traffic, high volume sites can see hit rates in the routing cache of only ~%10. The general flow of this patch series is that first the routing cache is removed. We build a completely new rtable entry every lookup request. Next we make some simplifications due to the fact that removing the routing cache causes several members of struct rtable to become no longer necessary. Then we need to make some amends such that we can legally cache pre-constructed routes in the FIB nexthops. Firstly, we need to invalidate routes which are hit with nexthop exceptions. Secondly we have to change the semantics of rt->rt_gateway such that zero means that the destination is on-link and non-zero otherwise. Now that the preparations are ready, we start caching precomputed routes in the FIB nexthops. Output and input routes need different kinds of care when determining if we can legally do such caching or not. The details are in the commit log messages for those changes. The patch series then winds down with some more struct rtable simplifications and other tidy ups that remove unnecessary overhead. On a SPARC-T3 output route lookups are ~876 cycles. Input route lookups are ~1169 cycles with rpfilter disabled, and about ~1468 cycles with rpfilter enabled. These measurements were taken with the kbench_mod test module in the net_test_tools GIT tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net_test_tools.git That GIT tree also includes a udpflood tester tool and stresses route lookups on packet output. For example, on the same SPARC-T3 system we can run: time ./udpflood -l 10000000 10.2.2.11 with routing cache: real 1m21.955s user 0m6.530s sys 1m15.390s without routing cache: real 1m31.678s user 0m6.520s sys 1m25.140s Performance undoubtedly can easily be improved further. For example fib_table_lookup() performs a lot of excessive computations with all the masking and shifting, some of it conditionalized to deal with edge cases. Also, Eric's no-ref optimization for input route lookups can be re-instated for the FIB nexthop caching code path. I would be really pleased if someone would work on that. In fact anyone suitable motivated can just fire up perf on the loading of the test net_test_tools benchmark kernel module. I spend much of my time going: bash# perf record insmod ./kbench_mod.ko dst=172.30.42.22 src=74.128.0.1 iif=2 bash# perf report Thanks to helpful feedback from Joe Perches, Eric Dumazet, Ben Hutchings, and others. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-22get rid of ->scm_work_listAl Viro
recursion in __scm_destroy() will be cut by delaying final fput() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22net: netprio_cgroup: rework update socket logicJohn Fastabend
Instead of updating the sk_cgrp_prioidx struct field on every send this only updates the field when a task is moved via cgroup infrastructure. This allows sockets that may be used by a kernel worker thread to be managed. For example in the iscsi case today a user can put iscsid in a netprio cgroup and control traffic will be sent with the correct sk_cgrp_prioidx value set but as soon as data is sent the kernel worker thread isssues a send and sk_cgrp_prioidx is updated with the kernel worker threads value which is the default case. It seems more correct to only update the field when the user explicitly sets it via control group infrastructure. This allows the users to manage sockets that may be used with other threads. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-22sctp: Implement quick failover draft from tsvwgNeil Horman
I've seen several attempts recently made to do quick failover of sctp transports by reducing various retransmit timers and counters. While its possible to implement a faster failover on multihomed sctp associations, its not particularly robust, in that it can lead to unneeded retransmits, as well as false connection failures due to intermittent latency on a network. Instead, lets implement the new ietf quick failover draft found here: http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 This will let the sctp stack identify transports that have had a small number of errors, and avoid using them quickly until their reliability can be re-established. I've tested this out on two virt guests connected via multiple isolated virt networks and believe its in compliance with the above draft and works well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: linux-sctp@vger.kernel.org CC: joe@perches.com Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Fix neigh lookup keying over loopback/point-to-point devices.David S. Miller
We were using a special key "0" for all loopback and point-to-point device neigh lookups under ipv4, but we wouldn't use that special key for the neigh creation. So basically we'd make a new neigh at each and every lookup :-) This special case to use only one neigh for these device types is of dubious value, so just remove it entirely. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill rt->fiDavid S. Miller
It's not really needed. We only grabbed a reference to the fib_info for the sake of fib_info local metrics. However, fib_info objects are freed using RCU, as are therefore their private metrics (if any). We would have triggered a route cache flush if we eliminated a reference to a fib_info object in the routing tables. Therefore, any existing cached routes will first check and see that they have been invalidated before an errant reference to these metric values would occur. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Turn rt->rt_route_iif into rt->rt_is_input.David S. Miller
That is this value's only use, as a boolean to indicate whether a route is an input route or not. So implement it that way, using a u16 gap present in the struct already. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill rt->rt_oifDavid S. Miller
Never actually used. It was being set on output routes to the original OIF specified in the flow key used for the lookup. Adjust the only user, ipmr_rt_fib_lookup(), for greater correctness of the flowi4_oif and flowi4_iif values, thanks to feedback from Julian Anastasov. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Cache input routes in fib_info nexthops.David S. Miller
Caching input routes is slightly simpler than output routes, since we don't need to be concerned with nexthop exceptions. (locally destined, and routed packets, never trigger PMTU events or redirects that will be processed by us). However, we have to elide caching for the DIRECTSRC and non-zero itag cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Cache output routes in fib_info nexthops.David S. Miller
If we have an output route that lacks nexthop exceptions, we can cache it in the FIB info nexthop. Such routes will have DST_HOST cleared because such routes refer to a family of destinations, rather than just one. The sequence of the handling of exceptions during route lookup is adjusted to make the logic work properly. Before we allocate the route, we lookup the exception. Then we know if we will cache this route or not, and therefore whether DST_HOST should be set on the allocated route. Then we use DST_HOST to key off whether we should store the resulting route, during rt_set_nexthop(), in the FIB nexthop cache. With help from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill routes during PMTU/redirect updates.David S. Miller
Mark them obsolete so there will be a re-lookup to fetch the FIB nexthop exception info. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20net: Document dst->obsolete better.David S. Miller
Add a big comment explaining how the field works, and use defines instead of magic constants for the values assigned to it. Suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Adjust semantics of rt->rt_gateway.David S. Miller
In order to allow prefixed routes, we have to adjust how rt_gateway is set and interpreted. The new interpretation is: 1) rt_gateway == 0, destination is on-link, nexthop is iph->daddr 2) rt_gateway != 0, destination requires a nexthop gateway Abstract the fetching of the proper nexthop value using a new inline helper, rt_nexthop(), as suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
2012-07-20ipv4: Remove 'rt_dst' from 'struct rtable'David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Remove 'rt_mark' from 'struct rtable'David Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill 'rt_src' from 'struct rtable'David Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Remove rt_key_{src,dst,tos} from struct rtable.David Miller
They are always used in contexts where they can be reconstituted, or where the finally resolved rt->rt_{src,dst} is semantically equivalent. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill ip_route_input_noref().David Miller
The "noref" argument to ip_route_input_common() is now always ignored because we do not cache routes, and in that case we must always grab a reference to the resulting 'dst'. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Delete routing cache.David S. Miller
The ipv4 routing cache is non-deterministic, performance wise, and is subject to reasonably easy to launch denial of service attacks. The routing cache works great for well behaved traffic, and the world was a much friendlier place when the tradeoffs that led to the routing cache's design were considered. What it boils down to is that the performance of the routing cache is a product of the traffic patterns seen by a system rather than being a product of the contents of the routing tables. The former of which is controllable by external entitites. Even for "well behaved" legitimate traffic, high volume sites can see hit rates in the routing cache of only ~%10. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20net: rename bond_queue_mapping to slave_dev_queue_mappingJiri Pirko
As this is going to be used not only by bonding. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20rtnl: allow to specify different num for rx and tx queue countJiri Pirko
Also cut out unused function parameters and possible err in return value. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20tcp: improve latencies of timer triggered eventsEric Dumazet
Modern TCP stack highly depends on tcp_write_timer() having a small latency, but current implementation doesn't exactly meet the expectations. When a timer fires but finds the socket is owned by the user, it rearms itself for an additional delay hoping next run will be more successful. tcp_write_timer() for example uses a 50ms delay for next try, and it defeats many attempts to get predictable TCP behavior in term of latencies. Use the recently introduced tcp_release_cb(), so that the user owning the socket will call various handlers right before socket release. This will permit us to post a followup patch to address the tcp_tso_should_defer() syndrome (some deferred packets have to wait RTO timer to be transmitted, while cwnd should allow us to send them sooner) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: John Heffner <johnwheffner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20tcp: use hash_32() in tcp_metricsEric Dumazet
Fix a missing roundup_pow_of_two(), since tcpmhash_entries is not guaranteed to be a power of two. Uses hash_32() instead of custom hash. tcpmhash_entries should be an unsigned int. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
2012-07-19net-tcp: Fast Open client - cookie-less modeYuchung Cheng
In trusted networks, e.g., intranet, data-center, the client does not need to use Fast Open cookie to mitigate DoS attacks. In cookie-less mode, sendmsg() with MSG_FASTOPEN flag will send SYN-data regardless of cookie availability. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19net-tcp: Fast Open client - detecting SYN-data dropsYuchung Cheng
On paths with firewalls dropping SYN with data or experimental TCP options, Fast Open connections will have experience SYN timeout and bad performance. The solution is to track such incidents in the cookie cache and disables Fast Open temporarily. Since only the original SYN includes data and/or Fast Open option, the SYN-ACK has some tell-tale sign (tcp_rcv_fastopen_synack()) to detect such drops. If a path has recurring Fast Open SYN drops, Fast Open is disabled for 2^(recurring_losses) minutes starting from four minutes up to roughly one and half day. sendmsg with MSG_FASTOPEN flag will succeed but it behaves as connect() then write(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)Yuchung Cheng
sendmsg() (or sendto()) with MSG_FASTOPEN is a combo of connect(2) and write(2). The application should replace connect() with it to send data in the opening SYN packet. For blocking socket, sendmsg() blocks until all the data are buffered locally and the handshake is completed like connect() call. It returns similar errno like connect() if the TCP handshake fails. For non-blocking socket, it returns the number of bytes queued (and transmitted in the SYN-data packet) if cookie is available. If cookie is not available, it transmits a data-less SYN packet with Fast Open cookie request option and returns -EINPROGRESS like connect(). Using MSG_FASTOPEN on connecting or connected socket will result in simlar errno like repeating connect() calls. Therefore the application should only use this flag on new sockets. The buffer size of sendmsg() is independent of the MSS of the connection. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19net-tcp: Fast Open client - sending SYN-dataYuchung Cheng
This patch implements sending SYN-data in tcp_connect(). The data is from tcp_sendmsg() with flag MSG_FASTOPEN (implemented in a later patch). The length of the cookie in tcp_fastopen_req, init'd to 0, controls the type of the SYN. If the cookie is not cached (len==0), the host sends data-less SYN with Fast Open cookie request option to solicit a cookie from the remote. If cookie is not available (len > 0), the host sends a SYN-data with Fast Open cookie option. If cookie length is negative, the SYN will not include any Fast Open option (for fall back operations). To deal with middleboxes that may drop SYN with data or experimental TCP option, the SYN-data is only sent once. SYN retransmits do not include data or Fast Open options. The connection will fall back to regular TCP handshake. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>