summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2010-03-059P2010.L handshake: Remove "dotu" variableSripathi Kodi
Removes 'dotu' variable and make everything dependent on 'proto_version' field. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-059P2010.L handshake: Add mount optionSripathi Kodi
Add new mount V9FS mount option to specify protocol version This patch adds a new mount option to specify protocol version. With this option it is possible to use "-o version=" switch to specify 9P protocol version to use. Valid options for version are: 9p2000 9p2000.u 9p2010.L Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-01Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-02-27Bluetooth: Add controller types for BR/EDR and 802.11 AMPMarcel Holtmann
With the Bluetooth 3.0 specification and the introduction of alternate MAC/PHY (AMP) support, it is required to differentiate between primary BR/EDR controllers and 802.11 AMP controllers. So introduce a special type inside HCI device for differentiation. For now all AMP controllers will be treated as raw devices until an AMP manager has been implemented. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert inquiry cache to use debugfs instead of sysfsMarcel Holtmann
The output of the inquiry cache is only useful for debugging purposes and so move it into debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert controller hdev->type to hdev->busMarcel Holtmann
The hdev->type is misnamed and should be actually hdev->bus instead. So convert it now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27rtnetlink: support specifying device flags on device creationPatrick McHardy
commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ipv6: Remove IPV6_ADDR_RESERVEDUlrich Weber
RFC 4291 section 2.4 states that all uncategorized addresses should be considered as Global Unicast. This will remove IPV6_ADDR_RESERVED completely and return IPV6_ADDR_UNICAST in ipv6_addr_type() instead. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-25net: Add checking to rcu_dereference() primitivesPaul E. McKenney
Update rcu_dereference() primitives to use new lockdep-based checking. The rcu_dereference() in __in6_dev_get() may be protected either by rcu_read_lock() or RTNL, per Eric Dumazet. The rcu_dereference() in __sk_free() is protected by the fact that it is never reached if an update could change it. Check for this by using rcu_dereference_check() to verify that the struct sock's ->sk_wmem_alloc counter is zero. Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-5-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23xfrm: SP lookups signature with markJamal Hadi Salim
pass mark to all SP lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23xfrm: SA lookups signature with markJamal Hadi Salim
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23xfrm: introduce basic mark infrastructureJamal Hadi Salim
Add basic structuring and accessors for xfrm mark Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22packet: convert socket list to RCU (v3)stephen hemminger
Convert AF_PACKET to use RCU, eliminating one more reader/writer lock. There is no need for a real sk_del_node_init_rcu(), because sk_del_node_init is doing the equivalent thing to hlst_del_init_rcu already; but added some comments to try and make that obvious. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19nl80211: add power save commandsKalle Valo
The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-18net: TCP thin dupackAndreas Petlund
This patch enables fast retransmissions after one dupACK for TCP if the stream is identified as thin. This will reduce latencies for thin streams that are not able to trigger fast retransmissions due to high packet interarrival time. This mechanism is only active if enabled by iocontrol or syscontrol and the stream is identified as thin. Signed-off-by: Andreas Petlund <apetlund@simula.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: TCP thin linear timeoutsAndreas Petlund
This patch will make TCP use only linear timeouts if the stream is thin. This will help to avoid the very high latencies that thin stream suffer because of exponential backoff. This mechanism is only active if enabled by iocontrol or syscontrol and the stream is identified as thin. A maximum of 6 linear timeouts is tried before exponential backoff is resumed. Signed-off-by: Andreas Petlund <apetlund@simula.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: TCP thin-stream detectionAndreas Petlund
Inline function to dynamically detect thin streams based on the number of packets in flight. Used to dynamically trigger thin-stream mechanisms if enabled by ioctl or sysctl. Signed-off-by: Andreas Petlund <apetlund@simula.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18const: struct nla_policyAlexey Dobriyan
Make remaining netlink policies as const. Fixup coding style where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ipv6: use standard lists for FIB walksAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18netfilter: nf_defrag_ipv4: fix compilation error with NF_CONNTRACK=nPatrick McHardy
As reported by Randy Dunlap <randy.dunlap@oracle.com>, compilation of nf_defrag_ipv4 fails with: include/net/netfilter/nf_conntrack.h:94: error: field 'ct_general' has incomplete type include/net/netfilter/nf_conntrack.h:178: error: 'const struct sk_buff' has no member named 'nfct' include/net/netfilter/nf_conntrack.h:185: error: implicit declaration of function 'nf_conntrack_put' include/net/netfilter/nf_conntrack.h:294: error: 'const struct sk_buff' has no member named 'nfct' net/ipv4/netfilter/nf_defrag_ipv4.c:45: error: 'struct sk_buff' has no member named 'nfct' net/ipv4/netfilter/nf_defrag_ipv4.c:46: error: 'struct sk_buff' has no member named 'nfct' net/nf_conntrack.h must not be included with NF_CONNTRACK=n, add a few #ifdefs. Long term the header file should be fixed to be usable even with NF_CONNTRACK=n. Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-18ipvs: SCTP Trasport Loadbalancing SupportVenkata Mohan Reddy
Enhance IPVS to load balance SCTP transport protocol packets. This is done based on the SCTP rfc 4960. All possible control chunks have been taken care. The state machine used in this code looks some what lengthy. I tried to make the state machine easy to understand. Signed-off-by: Venkata Mohan Reddy Koppula <mohanreddykv@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-18IPv6: convert mc_lock to spinlockStephen Hemminger
Only used for writing, so convert to spinlock Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17ipv6.h: reassembly: replace calculated magic number with multiplicationJoe Perches
On Tue, 2010-02-16 at 16:47 +0100, Patrick McHardy wrote: > Joe Perches wrote: > >> @@ -246,6 +246,8 @@ extern int ipv6_opt_accepted(struct sock *sk, struct sk_buff *skb); > >> int ip6_frag_nqueues(struct net *net); > >> int ip6_frag_mem(struct net *net); > >> > >> +#define IPV6_FRAG_HIGH_THRESH 262144 /* == 256*1024 */ > >> +#define IPV6_FRAG_LOW_THRESH 196608 /* == 192*1024 */ > >> #define IPV6_FRAG_TIMEOUT (60*HZ) /* 60 seconds */ > > > > 196608 isn't a number I want to remember. > > Is this better as: > > > > #define IPV6_FRAG_HIGH_THRESH (256 * 1024) /* 262144 */ > > #define IPV6_FRAG_LOW_THRESH (192 * 1024) /* 196608 */ > > Please send a patch, I'll apply it once these patches are in Dave's > tree. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17percpu: add __percpu sparse annotations to netTejun Heo
Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman
Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-15cfg80211/mac80211: allow registering for and sending action framesJouni Malinen
This implements a new command to register for action frames that userspace wants to handle instead of the in-kernel rejection. It is then responsible for rejecting ones that it decided not to handle. There is no unregistration, but the socket can be closed for that. Frames that are not registered for will not be forwarded to userspace and will be rejected by the kernel, the cfg80211 API helps implementing that. Additionally, this patch adds a new command that allows doing action frame transmission from userspace. It can be used either to exchange action frames on the current operational channel (e.g., with the AP with which we are currently associated) or to exchange off-channel Public Action frames with the remain-on-channel command. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15netfilter: nf_conntrack: add support for "conntrack zones"Patrick McHardy
Normally, each connection needs a unique identity. Conntrack zones allow to specify a numerical zone using the CT target, connections in different zones can use the same identity. Example: iptables -t raw -A PREROUTING -i veth0 -j CT --zone 1 iptables -t raw -A OUTPUT -o veth1 -j CT --zone 1 Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: nf_conntrack: pass template to l4proto ->error() handlerPatrick McHardy
The error handlers might need the template to get the conntrack zone introduced in the next patches to perform a conntrack lookup. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15net: Fix first line of kernel-doc for a few functionsBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-12xfrm: use proper kernel typesjamal
kernel side should use uxx instead of __uxx types Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12ipv6: fib: fix crash when changing large fib while dumping itPatrick McHardy
When the fib size exceeds what can be dumped in a single skb, the dump is suspended and resumed once the last skb has been received by userspace. When the fib is changed while the dump is suspended, the walker might contain stale pointers, causing a crash when the dump is resumed. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] PGD 5347a067 PUD 65c7067 PMD 0 Oops: 0000 [#1] PREEMPT SMP ... RIP: 0010:[<ffffffffa01bce04>] [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] ... Call Trace: [<ffffffff8104aca3>] ? mutex_spin_on_owner+0x59/0x71 [<ffffffffa01bd105>] inet6_dump_fib+0x11b/0x1b9 [ipv6] [<ffffffff81371af4>] netlink_dump+0x5b/0x19e [<ffffffff8134f288>] ? consume_skb+0x28/0x2a [<ffffffff81373b69>] netlink_recvmsg+0x1ab/0x2c6 [<ffffffff81372781>] ? netlink_unicast+0xfa/0x151 [<ffffffff813483e0>] __sock_recvmsg+0x6d/0x79 [<ffffffff81348a53>] sock_recvmsg+0xca/0xe3 [<ffffffff81066d4b>] ? autoremove_wake_function+0x0/0x38 [<ffffffff811ed1f8>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff810b3ed7>] ? find_get_page+0x90/0xa5 [<ffffffff810b5dc5>] ? filemap_fault+0x201/0x34f [<ffffffff810ef152>] ? fget_light+0x2f/0xac [<ffffffff813519e7>] ? verify_iovec+0x4f/0x94 [<ffffffff81349a65>] sys_recvmsg+0x14d/0x223 Store the serial number when beginning to walk the fib and reload pointers when continuing to walk after a change occured. Similar to other dumping functions, this might cause unrelated entries to be missed when entries are deleted. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12netfilter: nf_conntrack: elegantly simplify nf_ct_exp_net()Alexey Dobriyan
Remove #ifdef at nf_ct_exp_net() by using nf_ct_net(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack_sip: add T.38 FAX supportPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_nat: support mangling a single TCP packet multiple timesPatrick McHardy
nf_nat_mangle_tcp_packet() can currently only handle a single mangling per window because it only maintains two sequence adjustment positions: the one before the last adjustment and the one after. This patch makes sequence number adjustment tracking in nf_nat_mangle_tcp_packet() optional and allows a helper to manually update the offsets after the packet has been fully handled. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack: show helper and class in /proc/net/nf_conntrack_expectPatrick McHardy
Make the output a bit more informative by showing the helper an expectation belongs to and the expectation class. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-10net: add a wrapper sk_entry()Li Zefan
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10Merge branch 'master' of /repos/git/net-next-2.6Patrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-09mac80211: Retry null data frame for power save.Vivek Natarajan
Even if the null data frame is not acked by the AP, mac80211 goes into power save. This might lead to loss of frames from the AP. Prevent this by restarting dynamic_ps_timer when ack is not received for null data frames. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08mac80211: remove get_tx_stats() driver opKalle Valo
get_tx_stats() driver operation is not currently used anywhere in mac80211 and there are no plans to use it in the not-so-near future. So it can go without anyone missing it. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08mac80211: allow station add/remove to sleepJohannes Berg
Many drivers would like to sleep during station addition and removal, and currently have a high complexity there from not being able to. This introduces two new callbacks sta_add() and sta_remove() that drivers can implement instead of using sta_notify() and that can sleep, and the new sta_add() callback is also allowed to fail. The reason we didn't do this previously is that the IBSS code wants to insert stations from the RX path, which is a tasklet, so cannot sleep. This patch will keep the station allocation in that path, but moves adding the station to the driver out of line. Since the addition can now fail, we can have IBSS peer structs the driver rejected -- in that case we still talk to the station but never tell the driver about it in the control.sta pointer. If there will ever be a driver that has a low limit on the number of stations and that cannot talk to any stations that are not known to it, we need to do come up with a new strategy of handling larger IBSSs, maybe quicker expiry or rejecting peers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08wireless: update radiotap parserJohannes Berg
Upstream radiotap has adopted the namespace proposal David Young made and I then took care of, for which I had adapted the radiotap parser as a library outside the kernel. This brings the in-kernel parser up to speed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08netfilter: nf_conntrack: fix hash resizing with namespacesPatrick McHardy
As noticed by Jon Masters <jonathan@jonmasters.org>, the conntrack hash size is global and not per namespace, but modifiable at runtime through /sys/module/nf_conntrack/hashsize. Changing the hash size will only resize the hash in the current namespace however, so other namespaces will use an invalid hash size. This can cause crashes when enlarging the hashsize, or false negative lookups when shrinking it. Move the hash size into the per-namespace data and only use the global hash size to initialize the per-namespace value when instanciating a new namespace. Additionally restrict hash resizing to init_net for now as other namespaces are not handled currently. Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08netfilter: nf_conntrack: per netns nf_conntrack_cachepEric Dumazet
nf_conntrack_cachep is currently shared by all netns instances, but because of SLAB_DESTROY_BY_RCU special semantics, this is wrong. If we use a shared slab cache, one object can instantly flight between one hash table (netns ONE) to another one (netns TWO), and concurrent reader (doing a lookup in netns ONE, 'finding' an object of netns TWO) can be fooled without notice, because no RCU grace period has to be observed between object freeing and its reuse. We dont have this problem with UDP/TCP slab caches because TCP/UDP hashtables are global to the machine (and each object has a pointer to its netns). If we use per netns conntrack hash tables, we also *must* use per netns conntrack slab caches, to guarantee an object can not escape from one namespace to another one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> [Patrick: added unique slab name allocation] Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-03netfilter: xtables: add CT targetPatrick McHardy
Add a new target for the raw table, which can be used to specify conntrack parameters for specific connections, f.i. the conntrack helper. The target attaches a "template" connection tracking entry to the skb, which is used by the conntrack core when initializing a new conntrack. Signed-off-by: Patrick McHardy <kaber@trash.net>