summaryrefslogtreecommitdiff
path: root/include/rdma/rdma_cm.h
AgeCommit message (Collapse)Author
2011-05-25RDMA/cma: Pass QP type into rdma_create_id()Sean Hefty
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-25RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h>Nir Muchtar
Move cma.c's internal definition of enum cma_state to enum rdma_cm_state in an exported header so that it can be exported via RDMA netlink. Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-10RDMA/cma: Add an ID_REUSEADDR optionHefty, Sean
Lustre requires that clients bind to a privileged port number before connecting to a remote server. On larger clusters (typically more than about 1000 nodes), the number of privileged ports is exhausted, resulting in lustre being unusable. To handle this, we add support for reusable addresses to the rdma_cm. This mimics the behavior of the socket option SO_REUSEADDR. A user may set an rdma_cm_id to reuse an address before calling rdma_bind_addr() (explicitly or implicitly). If set, other rdma_cm_id's may be bound to the same address, provided that they all have reuse enabled, and there are no active listens. If rdma_listen() is called on an rdma_cm_id that has reuse enabled, it will only succeed if there are no other id's bound to that same address. The reuse option is exported to user space. The behavior of the kernel reuse implementation was verified against that given by sockets. This patch is derived from a path by Ira Weiny <weiny2@llnl.gov> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2010-02-11RDMA/cm: Remove unused definition of RDMA_PS_SCTPSean Hefty
The defined SCTP number is incorrect (0x83, rather than 0x84), and since it is not used anywhere, simply remove the definition. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cma: Remove padding arrays by using struct sockaddr_storageRoland Dreier
There are a few places where the RDMA CM code handles IPv6 by doing struct sockaddr addr; u8 pad[sizeof(struct sockaddr_in6) - sizeof(struct sockaddr)]; This is fragile and ugly; handle this in a better way with just struct sockaddr_storage addr; [ Also roll in patch from Aleksey Senin <alekseys@voltaire.com> to switch to struct sockaddr_storage and get rid of padding arrays in struct rdma_addr. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT eventAmir Vadai
Consumers that want to re-use their QPs in new connections need to know when the QP has exited the timewait state. Report the timewait event through the rdma_cm. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE eventOr Gerlitz
Add an RDMA_CM_EVENT_ADDR_CHANGE event can be used by rdma-cm consumers that wish to have their RDMA sessions always use the same links (eg <hca/port>) as the IP stack does. In the current code, this does not happen when bonding is used and fail-over happened but the IB link used by an already existing session is operating fine. Use the netevent notification for sensing that a change has happened in the IP stack, then scan the rdma-cm ID list to see if there is an ID that is "misaligned" with respect to the IP stack, and deliver RDMA_CM_EVENT_ADDR_CHANGE for this ID. The consumer can act on the event or just ignore it. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15RDMA: Improve include file coding styleDotan Barak
Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15RDMA: Fix license textSean Hefty
The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10RDMA/cma: Add ability to specify type of serviceSean Hefty
Provide support to specify a type of service for a communication identifier. A new function call is used when dealing with IPv4 addresses. For IPv6 addresses, the ToS is specified through the traffic class field in the sockaddr_in6 structure. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ The comments Eitan Zahavi and myself have made over the v1 post at <http://lists.openfabrics.org/pipermail/general/2007-August/039247.html> were fully addressed. ] Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16RDMA/cma: Add multicast communication supportSean Hefty
Extend rdma_cm to support multicast communication. Multicast support is added to the existing RDMA_PS_UDP port space, as well as a new RDMA_PS_IPOIB port space. The latter port space allows joining the multicast groups used by IPoIB, which enables offloading IPoIB traffic to a separate QP. The port space determines the signature used in the MGID when joining the group. The newly added RDMA_PS_IPOIB also allows for unicast operations, similar to RDMA_PS_UDP. Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized, since we can no longer assume that the qkey is constant. This requires saving the Q_Key to use when attaching to a device, so that it is available when creating the QP. The Q_Key information is exported to the user through the existing rdma_init_qp_attr() interface. Multicast support is also exported to userspace through the rdma_ucm. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Add support for RDMA_PS_UDPSean Hefty
Allow the use of UD QPs through the rdma_cm, in order to provide address translation services for resolving IB addresses for datagram messages using SIDR. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Allow early transition to RTS to handle lost CM messagesSean Hefty
During connection establishment, the passive side of a connection can receive messages from the active side before the connection event has been delivered to the user. Allow the passive side to send messages in response to received data before the event is delivered. To handle the case where the connection messages are lost, a new rdma_notify() function is added that users may invoke to force a connection into the established state. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Report connect info with connect eventsSean Hefty
Connection information was never given to the recipient of a connection request or reply message. Only the event was delivered. Report the connection data with the event to allows user to reject the connection based on the requested parameters, or adjust their resources to match the request. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Remove unneeded qp_type parameter from rdma_cmSean Hefty
The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/cma: Document rdma_accept() error handlingOr Gerlitz
Document the reject sending and modifying QP to error done in rdma_accept(). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/cma: Document rdma_destroy_id() functionOr Gerlitz
Clarify that rdma_destroy_id cancels outstanding asynchronous operations on the Associated id. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: IP address based RDMA connection managerSean Hefty
Kernel connection management agent over InfiniBand that connects based on IP addresses. The agent defines a generic RDMA connection abstraction to support clients wanting to connect over different RDMA devices. The agent also handles RDMA device hotplug events on behalf of clients. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>