summaryrefslogtreecommitdiff
path: root/include/rdma
AgeCommit message (Collapse)Author
2007-07-11IB/cm: Include HCA ACK delay in local ACK timeoutSean Hefty
The IB CM should include the HCA ACK delay when calculating the local ACK timeout value to use for RC QPs. If the HCA ACK delay is large enough relative to the packet life time, then if it is not taken into account, the calculated timeout value ends up being too small, which can result in "retry exceeded" errors. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-11IB/sa: Make sure SA queries use default P_KeySean Hefty
MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/cm: Improve local id allocation IPoIB/cm: Fix SRQ WR leak IB/ipoib: Fix typos in error messages IB/mlx4: Check if SRQ is full when posting receive IB/mlx4: Pass send queue sizes from userspace to kernel IB/mlx4: Fix check of opcode in mlx4_ib_post_send() mlx4_core: Fix array overrun in dump_dev_cap_flags() IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions IB/mthca: Fix RESET to ERROR transition IB/mlx4: Set GRH:HopLimit when sending globally routed MADs IB/mthca: Set GRH:HopLimit when building MLX headers IB/mlx4: Fix check of max_qp_dest_rdma in modify QP IB/mthca: Fix use-after-free on device restart IB/ehca: Return proper error code if register_mr fails IPoIB: Handle P_Key table reordering IB/core: Use start_port() and end_port() IB/core: Add helpers for uncached GID and P_Key searches IB/ipath: Fix potential deadlock with multicast spinlocks IB/core: Free umem when mm is already gone
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-19IB/core: Add helpers for uncached GID and P_Key searchesYosef Etigin
Add ib_find_gid() and ib_find_pkey() functions that use uncached device queries. The calls might block but the returns are always up-to-date. Cache P_Key and GID table lengths in core to avoid extra port info queries. Signed-off-by: Yosef Etigin <yosefe@voltaire.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09IB: Put rlimit accounting struct in struct ib_umemRoland Dreier
When memory pinned with ib_umem_get() is released, ib_umem_release() needs to subtract the amount of memory being unpinned from mm->locked_vm. However, ib_umem_release() may be called with mm->mmap_sem already held for writing if the memory is being released as part of an munmap() call, so it is sometimes necessary to defer this accounting into a workqueue. However, the work struct used to defer this accounting is dynamically allocated before it is queued, so there is the possibility of failing that allocation. If the allocation fails, then ib_umem_release has no choice except to bail out and leave the process with a permanently elevated locked_vm. Fix this by allocating the structure to defer accounting as part of the original struct ib_umem, so there's no possibility of failing a later allocation if creating the struct ib_umem and pinning memory succeeds. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09IB/uverbs: Export ib_umem_get()/ib_umem_release() to modulesRoland Dreier
Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-07Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Convert to NAPI IB: Return "maybe missed event" hint from ib_req_notify_cq() IB: Add CQ comp_vector support IB/ipath: Fix a race condition when generating ACKs IB/ipath: Fix two more spin lock problems IB/fmr_pool: Add prefix to all printks IB/srp: Set proc_name IB/srp: Add orig_dgid sysfs attribute to scsi_host IPoIB/cm: Don't crash if remote side uses one QP for both directions RDMA/cxgb3: Support for new abort logic RDMA/cxgb3: Initialize cpu_idx field in cpl_close_listserv_req message RDMA/cxgb3: Fail qp creation if the requested max_inline is too large RDMA/cxgb3: Fix TERM codes IPoIB/cm: Fix error handling in ipoib_cm_dev_open() IB/ipath: Don't corrupt pending mmap list when unmapped objects are freed IB/mthca: Work around kernel QP starvation IB/ipath: Don't put QP in timeout queue if waiting to send IB/ipath: Don't call spin_lock_irq() from interrupt context
2007-05-07IB: Return "maybe missed event" hint from ib_req_notify_cq()Roland Dreier
The semantics defined by the InfiniBand specification say that completion events are only generated when a completions is added to a completion queue (CQ) after completion notification is requested. In other words, this means that the following race is possible: while (CQ is not empty) ib_poll_cq(CQ); // new completion is added after while loop is exited ib_req_notify_cq(CQ); // no event is generated for the existing completion To close this race, the IB spec recommends doing another poll of the CQ after requesting notification. However, it is not always possible to arrange code this way (for example, we have found that NAPI for IPoIB cannot poll after requesting notification). Also, some hardware (eg Mellanox HCAs) actually will generate an event for completions added before the call to ib_req_notify_cq() -- which is allowed by the spec, since there's no way for any upper-layer consumer to know exactly when a completion was really added -- so the extra poll of the CQ is just a waste. Motivated by this, we add a new flag "IB_CQ_REPORT_MISSED_EVENTS" for ib_req_notify_cq() so that it can return a hint about whether the a completion may have been added before the request for notification. The return value of ib_req_notify_cq() is extended so: < 0 means an error occurred while requesting notification == 0 means notification was requested successfully, and if IB_CQ_REPORT_MISSED_EVENTS was passed in, then no events were missed and it is safe to wait for another event. > 0 is only returned if IB_CQ_REPORT_MISSED_EVENTS was passed in. It means that the consumer must poll the CQ again to make sure it is empty to avoid the race described above. We add a flag to enable this behavior rather than turning it on unconditionally, because checking for missed events may incur significant overhead for some low-level drivers, and consumers that don't care about the results of this test shouldn't be forced to pay for the test. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-07IB: Add CQ comp_vector supportMichael S. Tsirkin
Add a num_comp_vectors member to struct ib_device and extend ib_create_cq() to pass in a comp_vector parameter -- this parallels the userspace libibverbs API. Update all hardware drivers to set num_comp_vectors to 1 and have all ULPs pass 0 for the comp_vector value. Pass the value of num_comp_vectors to userspace rather than hard-coding a value of 1. We want multiple CQ event vector support (via MSI-X or similar for adapters that can generate multiple interrupts), but it's not clear how many vectors we want, or how we want to deal with policy issues such as how to decide which vector to use or how to set up interrupt affinity. This patch is useful for experimenting, since no core changes will be necessary when updating a driver to support multiple vectors, and we know that we want to make at least these changes anyway. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-03PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16RDMA/cma: Add multicast communication supportSean Hefty
Extend rdma_cm to support multicast communication. Multicast support is added to the existing RDMA_PS_UDP port space, as well as a new RDMA_PS_IPOIB port space. The latter port space allows joining the multicast groups used by IPoIB, which enables offloading IPoIB traffic to a separate QP. The port space determines the signature used in the MGID when joining the group. The newly added RDMA_PS_IPOIB also allows for unicast operations, similar to RDMA_PS_UDP. Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized, since we can no longer assume that the qkey is constant. This requires saving the Q_Key to use when attaching to a device, so that it is available when creating the QP. The Q_Key information is exported to the user through the existing rdma_init_qp_attr() interface. Multicast support is also exported to userspace through the rdma_ucm. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/sa: Track multicast join/leave requestsSean Hefty
The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB: Make sure struct ib_user_mad.data is alignedJason Gunthorpe
Make the untyped data region in ib_user_mad have type u64 so that it gets aligned properly. This avoids alignment faults in ib_umad when casting the data field to an rmpp_mad and accessing the 64-bit tid field on architectures like ia64. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB: Return qp pointer as part of ib_wcMichael S. Tsirkin
struct ib_wc currently only includes the local QP number: this matches the IB spec, but seems mostly useless. The following patch replaces this with the pointer to qp itself, and updates all low level drivers and all users. This has the following advantages: - Ability to get a per-qp context through wc->qp->qp_context - Existing drivers already have the qp pointer ready in poll cq, so this change actually saves a tiny bit (extra memory read) on data path (for ehca it would actually be expensive to find the QP pointer when polling a CQ, but ehca does not support SRQ so we can leave wc->qp as NULL for ehca) - Users that need the QP number can still get it through wc->qp->qp_num Use case: In IPoIB connected mode code, I have a common CQ shared by multiple QPs. To track connection usage, I need a way to get at some per-QP context upon the completion, and I would like to avoid allocating context object per work request just to stick a QP pointer into it. With this code, I can just use wc->qp->qp_context. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>Michael S. Tsirkin
<rdma/ib_verbs.h> uses struct kref, so it should include <linux/kref.h> explicitly to avoid hidden include dependencies. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15IB: Fix ib_dma_alloc_coherent() wrapperRoland Dreier
The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle parameter, unlike dma_alloc_coherent, which uses dma_addr_t*. This means that we need a temporary variable to handle the case when ib_dma_alloc_coherent() just falls through directly to dma_alloc_coherent() on architectures where sizeof u64 != sizeof dma_addr_t. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-14[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with ↵Ben Collins
do-while macros At least on PPC, the "op ? op : dma" construct causes a compile failure because the dma_* is a do{}while(0) macro. This turns all of them into proper if/else to avoid this problem. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12IB: Add DMA mapping functions to allow device drivers to interposeRalph Campbell
The QLogic InfiniPath HCAs use programmed I/O instead of HW DMA. This patch allows a verbs device driver to interpose on DMA mapping function calls in order to avoid relying on bus_to_virt() and phys_to_virt() to undo the mappings created by dma_map_single(), dma_map_sg(), etc. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Export rdma cm interface to userspaceSean Hefty
Export the rdma cm interfaces to userspace via a misc device. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Add support for RDMA_PS_UDPSean Hefty
Allow the use of UD QPs through the rdma_cm, in order to provide address translation services for resolving IB addresses for datagram messages using SIDR. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Allow early transition to RTS to handle lost CM messagesSean Hefty
During connection establishment, the passive side of a connection can receive messages from the active side before the connection event has been delivered to the user. Allow the passive side to send messages in response to received data before the event is delivered. To handle the case where the connection messages are lost, a new rdma_notify() function is added that users may invoke to force a connection into the established state. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Report connect info with connect eventsSean Hefty
Connection information was never given to the recipient of a connection request or reply message. Only the event was delivered. Report the connection data with the event to allows user to reject the connection based on the requested parameters, or adjust their resources to match the request. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Remove unneeded qp_type parameter from rdma_cmSean Hefty
The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29IB/cm: Fix automatic path migration supportSean Hefty
The ib_cm_establish() function is replaced with a more generic ib_cm_notify(). This routine is used to notify the CM that failover has occurred, so that future CM messages (LAP, DREQ) reach the remote CM. (Currently, we continue to use the original path) This bumps the userspace CM ABI. New alternate path information is captured when a LAP message is sent or received. This allows QP attributes to be initialized for the user when a new path is loaded after failover occurs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-02RDMA/addr: Use client registration to fix module unload raceSean Hefty
Require registration with ib_addr module to prevent caller from unloading while a callback is in progress. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-31IB/uverbs: Return sq_draining value in query_qp responseJack Morgenstein
Return the sq_draining value back to user space for query_qp instead of the en_sqd_async notify value, which is valid only for modify_qp. For query_qp, the draining status should returned. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/sa: fix ib_sa_selector namesMichael S. Tsirkin
Relevant SA queries are actually "greater than" / "less than", not "greater than or equal" / "less than or equal" as the names imply. (See IB spec 1.2 Vol 1, 15.2.5.16 PATHRECORD/Table 205 PathRecord) Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/cma: Document rdma_accept() error handlingOr Gerlitz
Document the reject sending and modifying QP to error done in rdma_accept(). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/cma: Document rdma_destroy_id() functionOr Gerlitz
Clarify that rdma_destroy_id cancels outstanding asynchronous operations on the Associated id. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/sa: Require SA registrationMichael S. Tsirkin
Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA: iWARP Core Changes.Tom Tucker
Modifications to the existing rdma header files, core files, drivers, and ulp files to support iWARP, including: - Hook iWARP CM into the build system and use it in rdma_cm. - Convert enum ib_node_type to enum rdma_node_type, which includes the possibility of RDMA_NODE_RNIC, and update everything for this. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA: iWARP Connection Manager.Tom Tucker
Add an iWARP Connection Manager (CM), which abstracts connection management for iWARP devices (RNICs). It is a logical instance of the xx_cm where xx is the transport type (ib or iw). The symbols exported are used by the transport independent rdma_cm module, and are available also for transport dependent ULPs. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Pass userspace data to modify_srq and modify_qp methodsRalph Campbell
Pass a struct ib_udata to the low-level driver's ->modify_srq() and ->modify_qp() methods, so that it can get to the device-specific data passed in by the userspace driver. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Allow resize CQ operation to return driver-specific dataRalph Campbell
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level drivers can return data from a resize CQ operation to userspace. Have ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump the userspace ABI. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-19[HEADERS] One line per header in Kbuild files to reduce conflictsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-24IB/mad: Validate MADs for spec complianceSean Hefty
Validate MADs sent by userspace clients for spec compliance with C13-18.1.1 (prevent duplicate requests and responses sent on the same port). Without this, RMPP transactions get aborted because of duplicate packets. This patch is similar to that provided by Jack Morgenstein. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-15[PATCH] fmr pool: remove unnecessary pointer dereferenceMichael S. Tsirkin
ib_fmr_pool_map_phys gets the virtual address by pointer but never writes there, and users (e.g. srp) seem to assume this and ignore the value returned. This patch cleans up the API to get the VA by value, and updates all users. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-15[PATCH] IB/addr: gid structure alignment fixMichael S. Tsirkin
The device address contains unsigned character arrays, which contain raw GID addresses. The GIDs may not be naturally aligned, so do not cast them to structures or unions. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
2006-06-18Add generic Kbuild files for 'make headers_install'David Woodhouse
This adds the Kbuild files listing the files which are to be installed by the 'headers_install' make target, in generic directories. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18IB/uverbs: Don't serialize with ib_uverbs_idr_mutexRoland Dreier
Currently, all userspace verbs operations that call into the kernel are serialized by ib_uverbs_idr_mutex. This can be a scalability issue for some workloads, especially for devices driven by the ipath driver, which needs to call into the kernel even for datapath operations. Fix this by adding reference counts to the userspace objects, and then converting ib_uverbs_idr_mutex into a spinlock that only protects the idrs long enough to take a reference on the object being looked up. Because remove operations may fail, we have to do a slightly funky two-step deletion, which is described in the comments at the top of uverbs_cmd.c. This also still leaves ib_uverbs_idr_lock as a single lock that is possibly subject to contention. However, the lock hold time will only be a single idr operation, so multiple threads should still be able to make progress, even if ib_uverbs_idr_lock is being ping-ponged. Surprisingly, these changes even shrink the object code: add/remove: 23/5 grow/shrink: 4/21 up/down: 633/-693 (-60) Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB/sa: Add ib_init_ah_from_path()Sean Hefty
Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: Add ib_init_ah_from_wc()Sean Hefty
Add a function to initialize address handle attributes from a work completion. This functionality is duplicated by both verbs and the CM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB/ucm: Get rid of duplicate P_Key parameterSean Hefty
The P_Key is provided into a SIDR REQ in two places, once as a parameter, and again in the path record. Remove the P_Key as a parameter and always use the one given in the path record. This change has no practical effect on ABI functionality. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: Move struct port_info from ipath to <rdma/ib_smi.h>Leonid Arsh
Move ipath's struct port_info into <rdma/ib_smi.h>, so that it can be used by mthca to implement client reregister support. Remove the __attribute__((packed)) because all the members of the struct are naturally aligned anyway. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: Add client reregister event typeLeonid Arsh
Add IB_EVENT_CLIENT_REREGISTER to enum so low-level drivers can generate "client reregister" events. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: Add caching of ports' LMCJack Morgenstein
Add an LMC cache to struct ib_device, and add a function ib_get_cached_lmc() to query the cache. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: IP address based RDMA connection managerSean Hefty
Kernel connection management agent over InfiniBand that connects based on IP addresses. The agent defines a generic RDMA connection abstraction to support clients wanting to connect over different RDMA devices. The agent also handles RDMA device hotplug events on behalf of clients. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18IB: address translation to map IP toIB addresses (GIDs)Sean Hefty
Add an address translation service that maps IP addresses to InfiniBand GID addresses using IPoIB. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>