summaryrefslogtreecommitdiff
path: root/include/sound/soc-dapm.h
AgeCommit message (Collapse)Author
2013-06-17Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2013-06-17Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2013-06-14ASoC: dapm: Remove unused long_name field from snd_soc_dapm_path structLars-Peter Clausen
Since commit 85762e71 ("ASoC: dapm: Implement mixer control sharing") the long_name field of the snd_soc_dapm_path struct is unused. All of the name handling now happens entirely in dapm_create_or_share_mixmux_kcontrol(). So we can remove the long_name field from the snd_soc_dapm_path struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07ASoC: dapm: Treat DAI widgets like AIF widgets for powerMark Brown
Even though they are virtual widgets DAI widgets still get counted for the DAPM context power management so we can't just use the active state to check if they should be powered as they may not be part of a complete path. Instead split them into input and output widgets and do the same power checks as we perform on AIFs. Reported-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-12ASoC: dapm: Provide early event callbacks for power up and downMark Brown
Some devices may benefit from being able to start some parts of the widget power up/down sequence earlier on in the sequence than the point at which the final power state is committed. Support these by providing events which are called before any power state changes are done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
2013-04-12Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2013-03-08ASoC: core: Remove unused "n_widgets" field from snd_soc_dapm structLars-Peter Clausen
Commit 497098be ("ASoC: dapm: Remove bodges for no-widget CODECs") removed the last user of the n_widgets field. Currently it is incremented for each widget added, but the value is never used, so we can remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-25ASoC: dapm: Fix handling of loopsMark Brown
Currently if a path loops back on itself we correctly skip over it to avoid going into an infinite loop but this causes us to ignore the need to power up the path as we don't count the loop for the purposes of counting inputs and outputs. This means that internal loopbacks within a device that have powered devices on them won't be powered up. Fix this by treating any path that is currently in the process of being recursed as having a single input or output so that it is counted for the purposes of power decisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-08ASoC: dapm: Add flags to regulator suppliesMark Brown
This will be used to enable additional control of the regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-09-06ASoC: dapm: Ensure bypass paths are suspended and resumedMark Brown
Since bypass paths aren't part of DAPM streams and we may not have any DAPM streams there may not be anything that triggers a DAPM sync for them. Mark all input and output widgets as dirty and then sync to do so at the end of suspend and resume. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-09-06ASoC: Remove unused 'saved_value' field from snd_soc_dapm_widget structLars-Peter Clausen
The only user was removed over two years ago in commit a6c65736 ("ASoC: Remove current PGA control handling"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06ASoC: dapm: Allow routes to be deleted at runtimeMark Brown
Since we're now relying on DAPM for things like enabling clocks when we reparent the clocks for widgets we need to either use conditional routes (which are expensive) or remove routes at runtime. Add a route removal API to support this use case. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03ASoC: core: Add widget SND_SOC_DAPM_CLOCK_SUPPLYOla Lilja
Adds a supply-widget variant for connection to the clock-framework. This widget-type corresponds to the variant for regulators. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ASoC: dapm: Add API call to query valid DAPM pathsLiam Girdwood
In preparation for ASoC DSP support. Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path. This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: core: Support transparent CODEC<->CODEC DAI linksMark Brown
Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-04ASoC: dapm: Allow DAPM registers to be 31 bitMark Brown
Supports larger register maps, not using unsigned ints for the full 32 bit as we rely on checking for negative registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01ASoC: dapm: Remove SND_SOC_DAPM_MICBIAS_E()Mark Brown
There are no users any more and new drivers should be using supply widgets which fully replace it anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
2012-04-01ASoC: dapm: Add regulator member to struct dapm_widgetLiam Girdwood
Currently DAPM widgets use the private data for their regulator. Add a regulator * for widgets to use instead of private data. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Rename dapm mutex subclass to better match usageLiam Girdwood
Rename SND_SOC_DAPM_CLASS_PCM to SND_SOC_DAPM_CLASS_RUNTIME to better match the usage and align with card mutex too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Add platform stream event supportLiam Girdwood
Currently stream events are only perfomed on codec stream widgets only. There is now a need to be able to perform stream events on platform widgets too. e.g. we have the ABE platform driver with several DAI links to dummy codecs. We need to be able to perform stream events on any of the dummy codec DAI links. This patch also removes the snd_soc_dai * parameter since it's already contained within the rtd * parameter. Finally makle stream event return void since no one checks it anyway. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Use DAPM mutex for DAPM ops instead of codec mutexLiam Girdwood
It has now become necessary to use a DAPM mutex instead of the codec mutex to lock the DAPM operations. This is due to the recent multi component support and forth coming Dynamic PCM updates. Currently we lock DAPM operations with the codec mutex of the calling RTD context. However, DAPM operations can span the whole card context and all components. This patch updates the DAPM operations that use the codec mutex to now use the DAPM mutex PCM subclass for all DAPM ops. We also add a mutex subclass for DAPM init and PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-17ASoC: dapm: Implement and instantiate DAI widgetsMark Brown
In order to allow us to do smarter things with DAI links create DAPM widgets which directly represent the DAIs in the DAPM graph. These are automatically created from the DAIs as we probe the card with references held in both directions between the widget and the DAI. The widgets are not made available for direct instantiation by drivers, they are created automatically from the DAIs. Drivers should be updated to create stream routes using DAPM maps rather than by annotating AIF and DAC widgets with streams. In order to ease transition to this model from existing drivers we automatically create DAPM routes between the DAI widgets and the existing stream widgets which are started and stopped by the DAI widgets, though the old stream handling mechanism is still in place. This also has the nice effect of removing non-DAPM devices as any device with a DAI acquires a widget automatically which will allow future simplifications to the core DAPM logic. The intention is that in future the AIF and DAI widgets will gain the ability to interact such that we are able to manage activity on individual channels independantly rather than powering up and down the entire AIF as we do currently. Currently we only generate these for CODECs, mostly as I have no systems with non-CODEC DAPM to integrate with. It should be a simple matter of programming to add the additional hookup for these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ASoC: dapm: Constify lots of names that are never modifiedMark Brown
Neater and avoids warnings when used in other places where const strings are desired. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ASoC: dapm: Supply the DAI and substream when calling stream eventsMark Brown
In order to allow us to do something smarter than iterate through widgets doing strcmp() to work out what to power up for stream events change the interface used to generate them to be based on the combination of a DAI and a stream direction rather than just a simple string identifying the stream. At some point we'll probably want a set of channels too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ASoC: dapm: Unexport snd_soc_dapm_new_control()Mark Brown
Everything now uses snd_soc_dapm_new_controls() instead so we don't need to make it part of the external API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-06ASoC: dapm: Export mixer|mux_update_power() to public API.Liam Girdwood
Allow for the operation of custom mixer and mux DAPM widgets that can call snd_soc_dapm_mixer_update_power() and snd_soc_dapm_mux_update_power() directly after updating their status. This is useful with complex DAPM Mixer operations where we need to do additional work in addition to setting a few mixer register bits. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: Provide REGULATOR_SUPPLY widget typeMark Brown
Modern devices allow systems to enable and disable individual supplies on the device, allowing additional power saving by switching off regulators which power portions of the device which are not currently in use. Add a new SND_SOC_DAPM_REGULATOR_SUPPLY widget type factoring out the code for managing such widgets from individual drivers. The widget name will be used as the supply name when requesting the regulator from the regulator API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-12-02ASoC: Add signal generator widget typeMark Brown
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-11-23ASoC: Implement fully_routed card propertyStephen Warren
A card is fully routed if the DAPM route table describes all connections on the board. When a card is fully routed, some operations can be automated by the ASoC core. The first, and currently only, such operation is described below, and implemented by this patch. Codecs often have a large number of external pins, and not all of these pins will be connected on all board designs. Some machine drivers therefore call snd_soc_dapm_nc_pin() for all the unused pins, in order to tell the ASoC core never to activate them. However, when a card is fully routed, the information needed to derive the set of unused pins is present in card->dapm_routes. In this case, have the ASoC core automatically call snd_soc_dapm_nc_pin() for each unused codec pin. This has been tested with soc/tegra/tegra_wm8903.c and soc/tegra/trimslice.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: Fix DAPM sync for TLV320AIC3x custom DAPM widgetMark Brown
We really should be doing this in the core, not in a driver... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2011-10-09ASoC: Cache connected input and output recursionsMark Brown
The number of connected input and output endpoints for a given widgets can't change during a DAPM run so there is no need to redo the recursion through branches of the tree we've already visited. Doing this on one of my test systems gives an improvement of: Power Path Neighbour Before: 63 607 731 After: 63 141 181 which scales up well as more widgets are involved in paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: Only run power_check() on a widget once per runMark Brown
Some widgets will get power_check() run on them more than once during a DAPM run, most commonly due to supply widgets checking to see if their consumers are powered up. It's wasteful to do this so cache the result of power_check() during a run. For one system I tested this on I got an improvement of: Power Path Neighbour Before: 106 970 1186 After: 69 727 905 from this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Do DAPM power checks only for widgets changed since last runMark Brown
In order to reduce the number of DAPM power checks we run keep a list of widgets which have been changed since the last DAPM run and iterate over that rather than the full widget list. Whenever we change the power state for a widget we add all the source and sink widgets it has to the dirty list, ensuring that all widgets in the path are checked. This covers more widgets than we need to as some of the neighbour widgets won't be connected but it's simpler as a first step. On one system I tried this gave: Power Path Neighbour Before: 207 1939 2461 After: 114 1066 1327 which seems useful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: Add another DAPM stat for neighbour checksMark Brown
The number of times we look at a potentially connected neighbour is just as important as the number of times we actually recurse into looking at that neighbour so also collect that statistic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21ASoC: Trace and collect statistics for DAPM graph walkingMark Brown
One of the longest standing areas for improvement in ASoC has been the DAPM algorithm - it repeats the same checks many times whenever it is run and makes no effort to limit the areas of the graph it checks meaning we do an awful lot of walks over the full graph. This has never mattered too much as the size of the graph has generally been small in relation to the size of the devices supported and the speed of CPUs but it is annoying. In preparation for work on improving this insert a trace point after the graph walk has been done. This gives us specific timing information for the walk, and in order to give quantifiable (non-benchmark) numbers also count every time we check a link or check the power for a widget and report those numbers. Substantial changes in the algorithm may require tweaks to the stats but they should be useful for simpler things. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-25ASoC: dapm - Add DAPM stream completion event.Liam Girdwood
In preparation for Dynamic PCM (AKA DSP) support. This adds a callback function to be called at the completion of a DAPM stream event. This can be used by DSP components to perform calculations based on DAPM graphs after completion of stream events. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-20ASoC: dapm - add DAPM macro for external enum widgetsLiam Girdwood
Add a convenience macro for external enumerated widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add platform widget IOLiam Girdwood
Allow platform driver widgets to perform any IO required for DAPM. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-14ASoC: Fix mismerge with release branchMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-13ASoC: Add weak routes for sidetone style pathsMark Brown
Normally DAPM will power up any connected audio path. This is not ideal for sidetone paths as with sidetone paths the audio path is not wanted in itself, it is only desired if the two paths it provides a sidetone between are both active. If the sidetone path causes a power up then it can be hard to minimise pops as we first power up either the sidetone or the main output path and then power the other, with the second power up potentially introducing a DC offset. Address this by introducing the concept of a weak path. If a path is marked as weak then DAPM will ignore that path when walking the graph, though all the relevant controls are still available to the application layer to allow these paths to be configured. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06ASoC: Specify target bias state directly as a bias stateMark Brown
Rather than a simple flag to say if we want the DAPM context to be at full power specify the target bias state. This should have no current effect but is a bit more direct and so makes it easier to change our decisions about the which bias state to go into in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-03ASoC: Store a list of widgets in a DAPM mux/mixer kcontrolStephen Warren
A future change will allow multiple widgets to be affected by the same control. For example, a single register bit that controls separate muxes in both the L and R audio paths. This change updates the code that handles relevant controls to be able to iterate over a list of affected widgets. Note that only the put functions need significant modification to implement the iteration; the get functions do not need to iterate, nor unify the results, since all affected widgets reference the same kcontrol. When creating the list of widgets, always create a 1-sized list, since the control sharing is not implemented in this change. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: Add w->kcontrols, and populate itStephen Warren
Future changes will need reference to the kcontrol created for a given kcontrol_new. Store the created kcontrol values now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: s/w->kcontrols/w->kcontrol_news/gStephen Warren
A future change will modify struct snd_soc_dapm_widget to store the actual kcontrol pointers for each kcontrol_new in a field named kcontrols. Rename the existing kcontrols field to enable this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03ASoC: Move DAPM debugfs directory creation to snd_soc_dapm_debugfs_initLars-Peter Clausen
Move the creation of the DAPM debugfs directory to snd_soc_dapm_debugfs_init instead of having the same duplicated code in both codec and card DAPM setup. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: simple style fixLu Guanqun
replace the tab with spaces, make it align with other paragraphs Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings