summaryrefslogtreecommitdiff
path: root/include/sound
AgeCommit message (Collapse)Author
2013-10-11ASoC: rcar: fixup generation checkerKuninori Morimoto
Current rcar is using rsnd_is_gen1/gen2() to checking its IP generation, but it needs data mask. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-12Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute fixes for 3.12-rc1. All patches are driver specific. - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups) - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood compatible string change, etc" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: mc13783: add spi errata fix ASoC: rsnd: fixup flag name of rsnd_scu_platform_info ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2 ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist ASoC: fsl_spdif: Select regmap-mmio ALSA: hda - unmute pin amplifier in infoframe setup for Haswell ALSA: hda - define is_haswell() to check if a display audio codec is Haswell ALSA: hda - Add dock speaker support for ASUS TX300 ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver ASoC: atmel: disable error interrupt ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
2013-09-09ASoC: rsnd: fixup flag name of rsnd_scu_platform_infoKuninori Morimoto
it should be *USE*, not *USB* Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-01Merge remote-tracking branch 'asoc/topic/fsl' into tmpMark Brown
2013-09-01Merge remote-tracking branch 'asoc/topic/core' into tmpMark Brown
2013-09-01ASoC: soc-pcm: Allow to specify unidirectional dai_linkFabio Estevam
Add 'playback_only' and 'capture_only' fields that can be used for specifying that a dai_link has a unidirectional capability. The motivation for this is for the cases of systems, such as Freescale MX28, that has two unidirectional DAIs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: Remove unused sysfs_registered field from snd_soc_codec structLars-Peter Clausen
The sysfs_registered field was added to the snd_soc_codec struct in commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"), but has never been used. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} structLars-Peter Clausen
The DAPM context struct has its own field where it stores the pointer to the DAPM debugfs entry. The debugfs_dapm field in the snd_soc_platform and snd_soc_codec structs are completely unused and can be removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: Remove unused control_type field from snd_soc_codec structLars-Peter Clausen
The control_type field was used by the core to track which raw IO methods to use, but when switching to regmap this was no longer necessary and so the last user of the field was removed in commit be3ea3b9 ("ASoC: Use new register map API for ASoC generic physical I/O"). The field is now completely unused and can be removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30Merge remote-tracking branch 'asoc/topic/core' into tmpMark Brown
2013-08-27ASoC: Pass card instead of dapm context to snd_soc_dapm_new_widgets()Lars-Peter Clausen
snd_soc_dapm_new_widgets() works on the ASoC card as a whole not on a specific DAPM context. The DAPM context that is passed as the parameter is only used to look up the pointer to the card. This patch updates the signature of snd_soc_dapm_new_widgets() to take the card directly. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27Merge remote-tracking branch 'asoc/topic/dapm' into asoc-coreMark Brown
2013-08-23Merge tag 'asoc-v3.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
2013-08-22Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown
2013-08-22Merge remote-tracking branch 'asoc/topic/pxa' into asoc-nextMark Brown
2013-08-22Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2013-08-22Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2013-08-22Merge remote-tracking branch 'asoc/topic/adsp' into asoc-nextMark Brown
2013-08-20ASoC: core: Generic ac97 link reset functionsMarkus Pargmann
This patch adds generic ac97 reset functions using pincontrol and gpio parsed from devicetree. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-19ALSA: pcm: Add snd_printd_ratelimit()Tim Gardner
Direct calls to printk_limit() will emit log noise even when CONFIG_SND_DEBUG is not defined. Add a wrapper macro around printk_limit() that is conditionally defined by CONFIG_SND_DEBUG. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-18[media] tea575x: Move header from sound to mediaOndrej Zary
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-15ASoC: pxa: use snd_dmaengine_dai_dma_dataDaniel Mack
Use snd_dmaengine_dai_dma_data for passing the dma parameters from clients to the pxa pcm lib. This does no functional change, it's just an intermedia step to migrate the pxa bits over to dmaengine. The calculation of dcmd is a transition hack which will be removed again in a later patch. It's just there to make the transition more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11ASoC: Use snd_soc_info_enum_double() for SOC_ENUM_EXT controlsLars-Peter Clausen
snd_soc_info_enum_ext() and snd_soc_info_enum_double() are almost identical. The only difference is that snd_soc_info_enum_double() is also able to handle stereo controls. Using snd_soc_info_enum double() instead of snd_soc_info_enum_ext() for the SOC_ENUM_EXT control's info callback allows us to remove snd_soc_info_enum_ext(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-11ASoC: Remove unused snd_soc_info_volsw_ext()Lars-Peter Clausen
The SOC_SINGLE_EXT control has been using snd_soc_info_volsw() for its info callback since commit 1c433fb ("[ALSA] soc - 0.13 ASoC headers"). The snd_soc_info_volsw_ext() function has been unused ever since then, so remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: rsnd: SSI supports DMA transfer via BUSIFKuninori Morimoto
This patch adds BUSIF support for R-Car sound DMAEngine transfer. The sound data will be transferred via FIFO which can cover blank time which will happen when DMA channel is switching. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: rsnd: SSI supports DMA transferKuninori Morimoto
This patch adds DMAEngine transfer on SSI. But, it transfers sound data from memory to SSI directly without using HPBIF at this time. It will be updated soon Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: rsnd: remove platform dai and add dai_id on platform settingKuninori Morimoto
Current rsnd driver is using struct rsnd_dai_platform_info so that indicate sound DAI information (playback/capture SSI ID). But, SSI settings were also required separately. Thus, platform settings was very un-understandable. This patch adds dai_id to SSI settings, and removed rsnd_dai_platform_info. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: dapm: Implement mixer input auto-disableLars-Peter Clausen
Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: dapm: Make widget power register settings more flexibleLars-Peter Clausen
Currently the DAPM code is limited to only setting or clearing a single bit in a register to power a widget up or down. This patch extends the DAPM code to be more flexible in that regard and allow widgets to use arbitrary values to be used to put a widget in either on or off state. Since the snd_soc_dapm_widget struct already contains a on_val and off_val field no additional fields need to be added and in fact the invert field can even be removed. Also the generated code is slightly smaller. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: dapm: Keep a list of paths per kcontrolLars-Peter Clausen
Currently we store for each path which control (if any at all) is associated with that control. But we are only ever interested in the reverse relationship, i.e. we want to know all the paths a certain control is associated with. This is currently implemented by always iterating over all paths. This patch updates the code to keep a list for each control which contains all the paths that are associated with that control. This improves the run time of e.g. soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() from O(n) (with n being the number of paths for the card) to O(1). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: dapm: Move 'value' field from widget to controlLars-Peter Clausen
The 'value' field is really per control and not per widget. Currently it is only used for virtual MUXes, which only have one control per widget. So in that case there is not so much of a difference between whether it is stored per widget or per control. Moving the 'value' field from the widget to the control will allow us to use it also for cases where we have more than one control per widget. E.g. for mixers with multiple input controls. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: dapm: Add a helper to get the CODEC for DAPM kcontrolLars-Peter Clausen
We use the same 3 lines to get the CODEC for a kcontrol in a quite a few places. This patch puts them into a common helper function. Having this encapsulated in a helper function will also make it more easier to eventually change the data layout of the kcontrol's private data. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: dapm: Move snd_soc_dapm_update from dapm context to cardLars-Peter Clausen
The update field of a DAPM context is only assigned while the card's dapm_mutex is locked, the field is also cleared again while the mutex is stil locked. So there will only ever be one DAPM context at a time with a non-NULL update field. So it is safe to move the update field from the DAPM context struct to the card struct. Doing so will allow further cleanups in this area. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29ASoC: core: Add snd_soc_card_get_kcontrol()Dimitris Papastamos
This is useful for drivers who want to grab a pointer to snd_kcontrol outside of the kcontrol callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car SSI featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car ADG featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car SCU featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car Generation featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car core featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-26[media] tea575x-tuner: move HW init to a separate functionOndrej Zary
Move HW initialization to separate function to allow using the code without the v4l parts. This is needed for use in the bttv driver. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-24ASoC: dapm: Add a update parameter to snd_soc_dapm_{mux,mixer}_update_powerLars-Peter Clausen
In order to avoid race conditions the assignment of dapm->update should happen while card->dapm_mutex is being held. To allow CODEC drivers to run a register update when using snd_soc_dapm_mux_update_power() or snd_soc_dapm_mixer_update_power() add a update parameter to these two functions. The update parameter will be assigned to dapm->update while card->dapm_mutex is locked. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24ASoC: dapm: Run widget updates for shared controls at the same timeLars-Peter Clausen
Currently when updating a control that is shared between multiple widgets the whole power-up/power-down sequence is being run once for each widget. The control register is updated during the first run, which means the CODEC internal routing is also updated for all widgets during this first run. The input and output paths for each widgets are only updated though during the respective run for that widget. This leads to a slight inconsistency between the CODEC's internal state and ASoC's state, which causes non optimal behavior in regard to click and pop avoidance. E.g. consider the following setup where two MUXs share the same control. +------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+ If the control is updated to switch the MUXs from input A to input B with the current code the power-up/power-down sequence will look like this: Run soc_dapm_mux_update_power for MUX1 Power-down A1 Update MUXing Power-up B1 Run soc_dapm_mux_update_power for MUX2 Power-down A2 (Update MUXing) Power-up B2 Note that the second 'Update Muxing' is a no-op, since the register was already updated. While the preferred order for avoiding pops and clicks should be: Run soc_dapm_mux_update_power for control Power-down A1 Power-down A2 Update MUXing Power-up B1 Power-up B2 This patch changes the behavior to the later by running the updates for all widgets that the control is attached to at the same time. The new code is also a bit simpler since callers of soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore and neither do we need to keep track for which of the kcontrol's widgets the current update is. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24ASoC: dapm: Pass snd_soc_card directly to soc_dpcm_runtime_update()Lars-Peter Clausen
soc_dpcm_runtime_update() operates on a ASoC card as a whole. Currently it takes a snd_soc_dapm_widget as its only parameter though. The widget is then used to look up the card and is otherwise unused. This patch changes the function to take a pointer to the card directly. This makes it possible to to call soc_dpcm_runtime_update() for updates which are not related to one specific widget. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-28Merge tag 'asoc-v3.11-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More updates for v3.11 Some more fixes and enhancements, and also a bunch of refectoring for AC'97 support which enables more than one AC'97 controller driver to be built in.
2013-06-27ASoC: ac97: Support multi-platform AC'97Mark Brown
Currently we can only have a single platform built in with AC'97 support due to the use of a global variable to provide the bus operations. Fix this by making that variable a pointer and having the bus drivers set the operations prior to registering. This is not a particularly good or nice approach but it avoids blocking multiplatform and a real fix involves fixing the fairly deep problems with AC'97 support - we should be converting it to a real bus. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24ALSA: vmaster: Add snd_ctl_sync_vmaster() helper functionTakashi Iwai
Introduce a new helper function, snd_ctl_sync_vmaster(), which updates the slave put callbacks forcibly as well as calling the hook. This will be used in the upcoming patch in HD-audio codec driver for toggling the mute in vmaster slaves. Along with the new function, the old snd_ctl_sync_vmaster_hook() is replaced as a macro calling with the argument hook_only=true. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21Merge tag 'asoc-v3.11' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.11 Not a big release subsystem wise, the main changes have been some nice improvements on the driver side: - Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500. - Generalisation of the Bluetooth and HDMI stub drivers. - New CODEC drivers for SSM2518 and RT5640. - New machine driver for Tegra CPUs with RT5640.
2013-06-17Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-nextMark Brown
2013-06-17Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown