summaryrefslogtreecommitdiff
path: root/include/trace
AgeCommit message (Collapse)Author
2013-07-11Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity this round on performance improvements in target-core while benchmarking the prototype scsi-mq initiator code with vhost-scsi fabric ports, along with a number of iscsi/iser-target improvements and hardening fixes for exception path cases post v3.10 merge. The highlights include: - Make persistent reservations APTPL buffer allocated on-demand, and drop per t10_reservation buffer. (grover) - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO device pages (grover) - Add transport_cmd_check_stop write_pending bit to avoid extra access of ->t_state_lock is WRITE I/O submission fast-path. (nab) - Drop unnecessary CMD_T_DEV_ACTIVE check from transport_lun_remove_cmd to avoid extra access of ->t_state_lock in release fast-path. (nab) - Avoid extra t_state_lock access in __target_execute_cmd fast-path (nab) - Drop unnecessary vhost-scsi wait_for_tasks=true usage + ->t_state_lock access in release fast-path. (nab) - Convert vhost-scsi to use modern se_cmd->cmd_kref TARGET_SCF_ACK_KREF usage (nab) - Add tracepoints for SCSI commands being processed (roland) - Refactoring of iscsi-target handling of ISCSI_OP_NOOP + ISCSI_OP_TEXT to be transport independent (nab) - Add iscsi-target SendTargets=$IQN support for in-band discovery (nab) - Add iser-target support for in-band discovery (nab + Or) - Add iscsi-target demo-mode TPG authentication context support (nab) - Fix isert_put_reject payload buffer post (nab) - Fix iscsit_add_reject* usage for iser (nab) - Fix iscsit_sequence_cmd reject handling for iser (nab) - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab) - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab) The last five iscsi/iser-target items are CC'ed to stable, as they do address issues present in v3.10 code. They are certainly larger than I'd like for stable patch set, but are important to ensure proper REJECT exception handling in iser-target for 3.10.y" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) iser-target: Ignore non TEXT + LOGOUT opcodes for discovery target: make queue_tm_rsp() return void target: remove unused codes from enum tcm_tmrsp_table iscsi-target: kstrtou* configfs attribute parameter cleanups iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len] iser-target: Add vendor_err debug output target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10) target: Return correct sense data for IO past the end of a device target: Add tracepoints for SCSI commands being processed iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser iscsi-target: Fix iscsit_sequence_cmd reject handling for iser iscsi-target: Fix iscsit_add_reject* usage for iser iser-target: Fix isert_put_reject payload buffer post iscsi-target: missing kfree() on error path iscsi-target: Drop left-over iscsi_conn->bad_hdr target: Make core_scsi3_update_and_write_aptpl return sense_reason_t ...
2013-07-11Merge tag 'trace-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing changes from Steven Rostedt: "The majority of the changes here are cleanups for the large changes that were added to 3.10, which includes several bug fixes that have been marked for stable. As for new features, there were a few, but nothing to write to LWN about. These include: New function trigger called "dump" and "cpudump" that will cause ftrace to dump its buffer to the console when the function is called. The difference between "dump" and "cpudump" is that "dump" will dump the entire contents of the ftrace buffer, where as "cpudump" will only dump the contents of the ftrace buffer for the CPU that called the function. Another small enhancement is a new sysctl switch called "traceoff_on_warning" which, when enabled, will disable tracing if any WARN_ON() is triggered. This is useful if you want to debug what caused a warning and do not want to risk losing your trace data by the ring buffer overwriting the data before you can disable it. There's also a kernel command line option that will make this enabled at boot up called the same thing" * tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (34 commits) tracing: Make tracing_open_generic_{tr,tc}() static tracing: Remove ftrace() function tracing: Remove TRACE_EVENT_TYPE enum definition tracing: Make tracer_tracing_{off,on,is_on}() static tracing: Fix irqs-off tag display in syscall tracing uprobes: Fix return value in error handling path tracing: Fix race between deleting buffer and setting events tracing: Add trace_array_get/put() to event handling tracing: Get trace_array ref counts when accessing trace files tracing: Add trace_array_get/put() to handle instance refs better tracing: Protect ftrace_trace_arrays list in trace_events.c tracing: Make trace_marker use the correct per-instance buffer ftrace: Do not run selftest if command line parameter is set tracing/kprobes: Don't pass addr=ip to perf_trace_buf_submit() tracing: Use flag buffer_disabled for irqsoff tracer tracing/kprobes: Turn trace_probe->files into list_head tracing: Fix disabling of soft disable tracing: Add missing syscall_metadata comment tracing: Simplify code for showing of soft disabled flag tracing/kprobes: Kill probe_enable_lock ...
2013-07-09Merge tag 'for-linus-3.11-merge-window-part-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p update from Eric Van Hensbergen: "Grab bag of little fixes and enhancements: - optional security enhancements - fix path coverage in MAINTAINERS - switch to using most used protocol and transport as default - clean up buffer dumps in trace code Held off on RDMA patches as they need to be cleaned up a bit, but will try to get the cleaned, checked, and pushed by mid-week" * tag 'for-linus-3.11-merge-window-part-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: Add rest of 9p files to MAINTAINERS entry 9p: trace: use %*ph to dump buffer net/9p: Handle error in zero copy request correctly for 9p2000.u net/9p: Use virtio transpart as the default transport net/9p: Make 9P2000.L the default protocol for 9p file system
2013-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs update from Chris Mason: "These are the usual mixture of bugs, cleanups and performance fixes. Miao has some really nice tuning of our crc code as well as our transaction commits. Josef is peeling off more and more problems related to early enospc, and has a number of important bug fixes in here too" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (81 commits) Btrfs: wait ordered range before doing direct io Btrfs: only do the tree_mod_log_free_eb if this is our last ref Btrfs: hold the tree mod lock in __tree_mod_log_rewind Btrfs: make backref walking code handle skinny metadata Btrfs: fix crash regarding to ulist_add_merge Btrfs: fix several potential problems in copy_nocow_pages_for_inode Btrfs: cleanup the code of copy_nocow_pages_for_inode() Btrfs: fix oops when recovering the file data by scrub function Btrfs: make the chunk allocator completely tree lockless Btrfs: cleanup orphaned root orphan item Btrfs: fix wrong mirror number tuning Btrfs: cleanup redundant code in btrfs_submit_direct() Btrfs: remove btrfs_sector_sum structure Btrfs: check if we can nocow if we don't have data space Btrfs: stop using try_to_writeback_inodes_sb_nr to flush delalloc Btrfs: use a percpu to keep track of possibly pinned bytes Btrfs: check for actual acls rather than just xattrs when caching no acl Btrfs: move btrfs_truncate_page to btrfs_cont_expand instead of btrfs_truncate Btrfs: optimize reada_for_balance Btrfs: optimize read_block_for_search ...
2013-07-08target: Add tracepoints for SCSI commands being processedRoland Dreier
This patch adds tracepoints to the target code for commands being received and being completed, which is quite useful for debugging interactions with initiators. For example, one can do something like the following to watch commands that are completing unsuccessfully: # echo 'scsi_status!=0' > /sys/kernel/debug/tracing/events/target/target_cmd_complete/filter # echo 1 > /sys/kernel/debug/tracing/events/target/target_cmd_complete/enable <run command that fails> # cat /sys/kernel/debug/tracing/trace iscsi_trx-0-1902 [003] ...1 990185.810385: target_cmd_complete: iqn.1993-08.org.debian:01:e51ede6aacfd <- LUN 001 status CHECK CONDITION (sense len 18 / 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00) 0x95 data_length 512 CDB 95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (TA:SIMPLE C:00) (v2: Drop undefined COMPARE_AND_WRITE) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03mm: add tracepoints for LRU activation and insertionsMel Gorman
Andrew Perepechko reported a problem whereby pages are being prematurely evicted as the mark_page_accessed() hint is ignored for pages that are currently on a pagevec -- http://www.spinics.net/lists/linux-ext4/msg37340.html . Alexey Lyahkov and Robin Dong have also reported problems recently that could be due to hot pages reaching the end of the inactive list too quickly and be reclaimed. Rather than addressing this on a per-filesystem basis, this series aims to fix the mark_page_accessed() interface by deferring what LRU a page is added to pagevec drain time and allowing mark_page_accessed() to call SetPageActive on a pagevec page. Patch 1 adds two tracepoints for LRU page activation and insertion. Using these processes it's possible to build a model of pages in the LRU that can be processed offline. Patch 2 defers making the decision on what LRU to add a page to until when the pagevec is drained. Patch 3 searches the local pagevec for pages to mark PageActive on mark_page_accessed. The changelog explains why only the local pagevec is examined. Patches 4 and 5 tidy up the API. postmark, a dd-based test and fs-mark both single and threaded mode were run but none of them showed any performance degradation or gain as a result of the patch. Using patch 1, I built a *very* basic model of the LRU to examine offline what the average age of different page types on the LRU were in milliseconds. Of course, capturing the trace distorts the test as it's written to local disk but it does not matter for the purposes of this test. The average age of pages in milliseconds were vanilla deferdrain Average age mapped anon: 1454 1250 Average age mapped file: 127841 155552 Average age unmapped anon: 85 235 Average age unmapped file: 73633 38884 Average age unmapped buffers: 74054 116155 The LRU activity was mostly files which you'd expect for a dd-based workload. Note that the average age of buffer pages is increased by the series and it is expected this is due to the fact that the buffer pages are now getting added to the active list when drained from the pagevecs. Note that the average age of the unmapped file data is decreased as they are still added to the inactive list and are reclaimed before the buffers. There is no guarantee this is a universal win for all workloads and it would be nice if the filesystem people gave some thought as to whether this decision is generally a win or a loss. This patch: Using these tracepoints it is possible to model LRU activity and the average residency of pages of different types. This can be used to debug problems related to premature reclaim of pages of particular types. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-03Merge tag 'regmap-v3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A small but useful set of regmap updates this time around: - An abstraction for bitfields within a register map contributed by Srinivas Kandagatla, allowing drivers to cope more easily when hardware designers randomly move things about (mainly when talking to things like system controllers). - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used from hard IRQ context. - Small improvements to the cache infrastructure and performance, including a default cache sync operation so now all regmaps can sync easily. There's also a pinctrl driver making use of the new bitfield API, merged here for dependency reasons. There will be a simple add/add conflict with the pinctrl tree as a result." * tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: pinctrl: st: Remove unnecessary use of of_match_ptr macro pinctrl: st: fix return value check pinctrl: st: Add pinctrl and pinconf support. regmap: debugfs: Suppress cache for partial register files regmap: Add regmap_field APIs regmap: core: Cache all registers by default when cache is enabled regmap: Implemented default cache sync operation regmap: Make regmap-mmio usable from atomic contexts regmap: regcache: Fixup locking for custom lock callbacks regmap: debugfs: Fix return from regmap_debugfs_get_dump_start regmap: debugfs: Don't mark lockdep as broken due to debugfs write regmap: rbtree: Use range information to allocate nodes regmap: rbtree: Factor out node allocation regmap: Make regmap_check_range_table() a public API regmap: Add support for discarding parts of the register cache
2013-07-02Merge branch 'x86-tracing-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tracing updates from Ingo Molnar: "This tree adds IRQ vector tracepoints that are named after the handler and which output the vector #, based on a zero-overhead approach that relies on changing the IDT entries, by Seiji Aguchi. The new tracepoints look like this: # perf list | grep -i irq_vector irq_vectors:local_timer_entry [Tracepoint event] irq_vectors:local_timer_exit [Tracepoint event] irq_vectors:reschedule_entry [Tracepoint event] irq_vectors:reschedule_exit [Tracepoint event] irq_vectors:spurious_apic_entry [Tracepoint event] irq_vectors:spurious_apic_exit [Tracepoint event] irq_vectors:error_apic_entry [Tracepoint event] irq_vectors:error_apic_exit [Tracepoint event] [...]" * 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tracing: Add config option checking to the definitions of mce handlers trace,x86: Do not call local_irq_save() in load_current_idt() trace,x86: Move creation of irq tracepoints from apic.c to irq.c x86, trace: Add irq vector tracepoints x86: Rename variables for debugging x86, trace: Introduce entering/exiting_irq() tracing: Add DEFINE_EVENT_FN() macro
2013-07-02Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel improvements: - watchdog driver improvements by Li Zefan - Power7 CPI stack events related improvements by Sukadev Bhattiprolu - event multiplexing via hrtimers and other improvements by Stephane Eranian - kernel stack use optimization by Andrew Hunter - AMD IOMMU uncore PMU support by Suravee Suthikulpanit - NMI handling rate-limits by Dave Hansen - various hw_breakpoint fixes by Oleg Nesterov - hw_breakpoint overflow period sampling and related signal handling fixes by Jiri Olsa - Intel Haswell PMU support by Andi Kleen Tooling improvements: - Reset SIGTERM handler in workload child process, fix from David Ahern. - Makefile reorganization, prep work for Kconfig patches, from Jiri Olsa. - Add automated make test suite, from Jiri Olsa. - Add --percent-limit option to 'top' and 'report', from Namhyung Kim. - Sorting improvements, from Namhyung Kim. - Expand definition of sysfs format attribute, from Michael Ellerman. Tooling fixes: - 'perf tests' fixes from Jiri Olsa. - Make Power7 CPI stack events available in sysfs, from Sukadev Bhattiprolu. - Handle death by SIGTERM in 'perf record', fix from David Ahern. - Fix printing of perf_event_paranoid message, from David Ahern. - Handle realloc failures in 'perf kvm', from David Ahern. - Fix divide by 0 in variance, from David Ahern. - Save parent pid in thread struct, from David Ahern. - Handle JITed code in shared memory, from Andi Kleen. - Fixes for 'perf diff', from Jiri Olsa. - Remove some unused struct members, from Jiri Olsa. - Add missing liblk.a dependency for python/perf.so, fix from Jiri Olsa. - Respect CROSS_COMPILE in liblk.a, from Rabin Vincent. - No need to do locking when adding hists in perf report, only 'top' needs that, from Namhyung Kim. - Fix alignment of symbol column in in the hists browser (top, report) when -v is given, from NAmhyung Kim. - Fix 'perf top' -E option behavior, from Namhyung Kim. - Fix bug in isupper() and islower(), from Sukadev Bhattiprolu. - Fix compile errors in bp_signal 'perf test', from Sukadev Bhattiprolu. ... and more things" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits) perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable() perf/x86: Fix shared register mutual exclusion enforcement perf/x86/intel: Support full width counting x86: Add NMI duration tracepoints perf: Drop sample rate when sampling is too slow x86: Warn when NMI handlers take large amounts of time hw_breakpoint: Introduce "struct bp_cpuinfo" hw_breakpoint: Simplify *register_wide_hw_breakpoint() hw_breakpoint: Introduce cpumask_of_bp() hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths perf/x86/intel: Add mem-loads/stores support for Haswell perf/x86/intel: Support Haswell/v4 LBR format perf/x86/intel: Move NMI clearing to end of PMI handler perf/x86/intel: Add Haswell PEBS support perf/x86/intel: Add simple Haswell PMU support perf/x86/intel: Add Haswell PEBS record support perf/x86/intel: Fix sparse warning perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation perf/x86/amd: Add IOMMU Performance Counter resource management ...
2013-07-02tracing: Add missing syscall_metadata commentTom Zanussi
Add the missing syscall_metadata description for the enter_fields struct member. Link: http://lkml.kernel.org/r/74c3407cd1e5d37f2c5aaca637aa4d35f66f1aa2.1372479499.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-01ext4: translate flag bits to strings in tracepointsTheodore Ts'o
Translate the bitfields used in various flags argument to strings to make the tracepoint output more human-readable. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-30Merge remote-tracking branch 'regmap/topic/cache' into regmap-nextMark Brown
2013-06-24PM / QoS: Add dev_pm_qos_request tracepointsSahara
Adds tracepoints to dev_pm_qos_add_request, dev_pm_qos_update_request, and dev_pm_qos_remove_request. It's useful for checking device name, dev_pm_qos_request_type, and value. Signed-off-by: Sahara <keun-o.park@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-24PM / QoS: Add pm_qos_request tracepointsSahara
Adds tracepoints to pm_qos_add_request, pm_qos_update_request, pm_qos_remove_request, and pm_qos_update_request_timeout. It's useful for checking pm_qos_class, value, and timeout_us. Signed-off-by: Sahara <keun-o.park@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-24PM / QoS: Add pm_qos_update_target/flags tracepointsSahara
This patch adds tracepoints to pm_qos_update_target and pm_qos_update_flags. It's useful for checking pm qos action, previous value and current value. Signed-off-by: Sahara <keun-o.park@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-23x86: Add NMI duration tracepointsDave Hansen
This patch has been invaluable in my adventures finding issues in the perf NMI handler. I'm as big a fan of printk() as anybody is, but using printk() in NMIs is deadly when they're happening frequently. Even hacking in trace_printk() ended up eating enough CPU to throw off some of the measurements I was making. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: acme@ghostprotocols.net Cc: Dave Hansen <dave@sr71.net> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-21tracing: Add DEFINE_EVENT_FN() macroSteven Rostedt
Each TRACE_EVENT() adds several helper functions. If two or more trace events share the same structure and print format, they can also share most of these helper functions and save a lot of space from duplicate code. This is why the DECLARE_EVENT_CLASS() and DEFINE_EVENT() were created. Some events require a trigger to be called at registering and unregistering of the event and to do so they use TRACE_EVENT_FN(). If multiple events require a trigger, they currently have no choice but to use TRACE_EVENT_FN() as there's no DEFINE_EVENT_FN() available. This unfortunately causes a lot of wasted duplicate code created. By adding a DEFINE_EVENT_FN(), these events can still use a DECLARE_EVENT_CLASS() and then define their own triggers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/51C3236C.8030508@hds.com Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-14Btrfs: update new flags for tracepointLiu Bo
Adding new flags to keep tracepoints consistent with btrfs. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-06-06ext4: use ext4_da_writepages() for all modesTheodore Ts'o
Rename ext4_da_writepages() to ext4_writepages() and use it for all modes. We still need to iterate over all the pages in the case of data=journalling, but in the case of nodelalloc/data=ordered (which is what file systems mounted using ext3 backwards compatibility will use) this will allow us to use a much more efficient I/O submission path. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04ext4: restructure writeback pathJan Kara
There are two issues with current writeback path in ext4. For one we don't necessarily map complete pages when blocksize < pagesize and thus needn't do any writeback in one iteration. We always map some blocks though so we will eventually finish mapping the page. Just if writeback races with other operations on the file, forward progress is not really guaranteed. The second problem is that current code structure makes it hard to associate all the bios to some range of pages with one io_end structure so that unwritten extents can be converted after all the bios are finished. This will be especially difficult later when io_end will be associated with reserved transaction handle. We restructure the writeback path to a relatively simple loop which first prepares extent of pages, then maps one or more extents so that no page is partially mapped, and once page is fully mapped it is submitted for IO. We keep all the mapping and IO submission information in mpage_da_data structure to somewhat reduce stack usage. Resulting code is somewhat shorter than the old one and hopefully also easier to read. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04ext4: provide wrappers for transaction reservation callsJan Kara
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-05-289p: trace: use %*ph to dump bufferAndy Shevchenko
Additionally change cast from long to unsigned long to follow specificator. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2013-05-28ext4: make punch hole code path work with bigallocLukas Czerner
Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28ext4: update ext4_ext_remove_space trace pointLukas Czerner
Add "end" variable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-22jbd: change journal_invalidatepage() to accept lengthLukas Czerner
->invalidatepage() aop now accepts range to invalidate so we can make use of it in journal_invalidatepage() and all the users in ext3 file system. Also update ext3 trace point to print out length argument. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-22ext4: use ->invalidatepage() length argumentLukas Czerner
->invalidatepage() aop now accepts range to invalidate so we can make use of it in all ext4 invalidatepage routines. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-14Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 update from Ted Ts'o: "Fixed regressions (two stability regressions and a performance regression) introduced during the 3.10-rc1 merge window. Also included is a bug fix relating to allocating blocks after resizing an ext3 file system when using the ext4 file system driver" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() ext4: revert "ext4: use io_end for multiple bios" ext4: limit group search loop for non-extent files ext4: fix fio regression
2013-05-12regmap: Add support for discarding parts of the register cacheMark Brown
Allow drivers to discard parts of the register cache, for example if part of the hardware has been reset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-08Merge tag 'f2fs-for-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches. - introduce a new gloabl lock scheme - add tracepoints on several major functions - fix the overall cleaning process focused on victim selection - apply the block plugging to merge IOs as much as possible - enhance management of free nids and its list - enhance the readahead mode for node pages - address several cretical deadlock conditions - reduce lock_page calls The other minor bug fixes and enhancements are as follows. - calculation mistakes: overflow - bio types: READ, READA, and READ_SYNC - fix the recovery flow, data races, and null pointer errors" * tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits) f2fs: cover free_nid management with spin_lock f2fs: optimize scan_nat_page() f2fs: code cleanup for scan_nat_page() and build_free_nids() f2fs: bugfix for alloc_nid_failed() f2fs: recover when journal contains deleted files f2fs: continue to mount after failing recovery f2fs: avoid deadlock during evict after f2fs_gc f2fs: modify the number of issued pages to merge IOs f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry. f2fs: fix inconsistent using of NM_WOUT_THRESHOLD f2fs: check truncation of mapping after lock_page f2fs: enhance alloc_nid and build_free_nids flows f2fs: add a tracepoint on f2fs_new_inode f2fs: check nid == 0 in add_free_nid f2fs: add REQ_META about metadata requests for submit f2fs: give a chance to merge IOs by IO scheduler f2fs: avoid frequent background GC f2fs: add tracepoints to debug checkpoint request f2fs: add tracepoints for write page operations f2fs: add tracepoints to debug the block allocation ...
2013-05-08Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-05Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
2013-05-05Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...
2013-05-03ext4: fix fio regressionYan, Zheng
We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project <lkp@linux.intel.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Cc: "Theodore Ts'o" <tytso@mit.edu>
2013-05-03Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ...
2013-05-02Merge commit '8700c95adb03' into timers/nohzFrederic Weisbecker
The full dynticks tree needs the latest RCU and sched upstream updates in order to fix some dependencies. Merge a common upstream merge point that has these updates. Conflicts: include/linux/perf_event.h kernel/rcutree.h kernel/rcutree_plugin.h Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-05-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Mostly performance and bug fixes, plus some cleanups. The one new feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which allows installation of a hidden inode designed for boot loaders." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits) ext4: fix type-widening bug in inode table readahead code ext4: add check for inodes_count overflow in new resize ioctl ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG ext4: fix online resizing for ext3-compat file systems jbd2: trace when lock_buffer in do_get_write_access takes a long time ext4: mark metadata blocks using bh flags buffer: add BH_Prio and BH_Meta flags ext4: mark all metadata I/O with REQ_META ext4: fix readdir error in case inline_data+^dir_index. ext4: fix readdir error in the case of inline_data+dir_index jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset ext4: mext_insert_extents should update extent block checksum ext4: move quota initialization out of inode allocation transaction ext4: reserve xattr index for Rich ACL support jbd2: reduce journal_head size ext4: clear buffer_uninit flag when submitting IO ext4: use io_end for multiple bios ext4: make ext4_bio_write_page() use BH_Async_Write flags ext4: Use kstrtoul() instead of parse_strtoul() ext4: defragmentation code cleanup ...
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle are mostly related to preparatory work for the full-dynticks work: - Remove restrictions on no-CBs CPUs, make RCU_FAST_NO_HZ take advantage of numbered callbacks, do callback accelerations based on numbered callbacks. Posted to LKML at https://lkml.org/lkml/2013/3/18/960 - RCU documentation updates. Posted to LKML at https://lkml.org/lkml/2013/3/18/570 - Miscellaneous fixes. Posted to LKML at https://lkml.org/lkml/2013/3/18/594" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) rcu: Make rcu_accelerate_cbs() note need for future grace periods rcu: Abstract rcu_start_future_gp() from rcu_nocb_wait_gp() rcu: Rename n_nocb_gp_requests to need_future_gp rcu: Push lock release to rcu_start_gp()'s callers rcu: Repurpose no-CBs event tracing to future-GP events rcu: Rearrange locking in rcu_start_gp() rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks rcu: Accelerate RCU callbacks at grace-period end rcu: Export RCU_FAST_NO_HZ parameters to sysfs rcu: Distinguish "rcuo" kthreads by RCU flavor rcu: Add event tracing for no-CBs CPUs' grace periods rcu: Add event tracing for no-CBs CPUs' callback registration rcu: Introduce proper blocking to no-CBs kthreads GP waits rcu: Provide compile-time control for no-CBs CPUs rcu: Tone down debugging during boot-up and shutdown. rcu: Add softirq-stall indications to stall-warning messages rcu: Documentation update rcu: Make bugginess of code sample more evident rcu: Fix hlist_bl_set_first_rcu() annotation rcu: Delete unused rcu_node "wakemask" field ...
2013-04-30Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge second batch of fixes from Andrew Morton: - various misc bits - some printk updates - a new "SRAM" driver. - MAINTAINERS updates - the backlight driver queue - checkpatch updates - a few init/ changes - a huge number of drivers/rtc changes - fatfs updates - some lib/idr.c work - some renaming of the random driver interfaces * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (285 commits) net: rename random32 to prandom net/core: remove duplicate statements by do-while loop net/core: rename random32() to prandom_u32() net/netfilter: rename random32() to prandom_u32() net/sched: rename random32() to prandom_u32() net/sunrpc: rename random32() to prandom_u32() scsi: rename random32() to prandom_u32() lguest: rename random32() to prandom_u32() uwb: rename random32() to prandom_u32() video/uvesafb: rename random32() to prandom_u32() mmc: rename random32() to prandom_u32() drbd: rename random32() to prandom_u32() kernel/: rename random32() to prandom_u32() mm/: rename random32() to prandom_u32() lib/: rename random32() to prandom_u32() x86: rename random32() to prandom_u32() x86: pageattr-test: remove srandom32 call uuid: use prandom_bytes() raid6test: use prandom_bytes() sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic() ...
2013-04-30printk/tracing: rework console tracingzhangwei(Jovi)
Commit 7ff9554bb578 ("printk: convert byte-buffer to variable-length record buffer") removed start and end parameters from call_console_drivers, but those parameters still exist in include/trace/events/printk.h. Without start and end parameters handling, printk tracing became more simple as: trace_console(text, len); Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge first batch of fixes from Andrew Morton: - A couple of kthread changes - A few minor audit patches - A number of fbdev patches. Florian remains AWOL so I'm picking up some of these. - A few kbuild things - ocfs2 updates - Almost all of the MM queue (And in the meantime, I already have the second big batch from Andrew pending in my mailbox ;^) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (149 commits) memcg: take reference before releasing rcu_read_lock mem hotunplug: fix kfree() of bootmem memory mmKconfig: add an option to disable bounce mm, nobootmem: do memset() after memblock_reserve() mm, nobootmem: clean-up of free_low_memory_core_early() fs/buffer.c: remove unnecessary init operation after allocating buffer_head. numa, cpu hotplug: change links of CPU and node when changing node number by onlining CPU mm: fix memory_hotplug.c printk format warning mm: swap: mark swap pages writeback before queueing for direct IO swap: redirty page if page write fails on swap file mm, memcg: give exiting processes access to memory reserves thp: fix huge zero page logic for page with pfn == 0 memcg: avoid accessing memcg after releasing reference fs: fix fsync() error reporting memblock: fix missing comment of memblock_insert_region() mm: Remove unused parameter of pages_correctly_reserved() firmware, memmap: fix firmware_map_entry leak mm/vmstat: add note on safety of drain_zonestat mm: thp: add split tail pages to shrink page list in page reclaim mm: allow for outstanding swap writeback accounting ...
2013-04-29Merge tag 'regmap-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "In user visible terms just a couple of enhancements here, though there was a moderate amount of refactoring required in order to support the register cache sync performance improvements. - Support for block and asynchronous I/O during register cache syncing; this provides a use case dependant performance improvement. - Additional debugfs information on the memory consuption and register set" * tag 'regmap-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits) regmap: don't corrupt work buffer in _regmap_raw_write() regmap: cache: Fix format specifier in dev_dbg regmap: cache: Make regcache_sync_block_raw static regmap: cache: Write consecutive registers in a single block write regmap: cache: Split raw and non-raw syncs regmap: cache: Factor out block sync regmap: cache: Factor out reg_present support from rbtree cache regmap: cache: Use raw I/O to sync rbtrees if we can regmap: core: Provide regmap_can_raw_write() operation regmap: cache: Provide a get address of value operation regmap: Cut down on the average # of nodes in the rbtree cache regmap: core: Make raw write available to regcache regmap: core: Warn on invalid operation combinations regmap: irq: Clarify error message when we fail to request primary IRQ regmap: rbtree Expose total memory consumption in the rbtree debugfs entry regmap: debugfs: Add a registers `range' file regmap: debugfs: Simplify calculation of `c->max_reg' regmap: cache: Store caches in native register format where possible regmap: core: Split out in place value parsing regmap: cache: Use regcache_get_value() to check if we updated ...
2013-04-29mm: trace filemap add and delRobert Jarzmik
Use the events API to trace filemap loading and unloading of file pieces into the page cache. This patch aims at tracing the eviction reload cycle of executable and shared libraries pages in a memory constrained environment. The typical usage is to spot a specific device and inode (for example /lib/libc.so) to see the eviction cycles, and find out if frequently used code is rather spread across many pages (bad) or coallesced (good). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29Merge tag 'trace-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Along with the usual minor fixes and clean ups there are a few major changes with this pull request. 1) Multiple buffers for the ftrace facility This feature has been requested by many people over the last few years. I even heard that Google was about to implement it themselves. I finally had time and cleaned up the code such that you can now create multiple instances of the ftrace buffer and have different events go to different buffers. This way, a low frequency event will not be lost in the noise of a high frequency event. Note, currently only events can go to different buffers, the tracers (ie function, function_graph and the latency tracers) still can only be written to the main buffer. 2) The function tracer triggers have now been extended. The function tracer had two triggers. One to enable tracing when a function is hit, and one to disable tracing. Now you can record a stack trace on a single (or many) function(s), take a snapshot of the buffer (copy it to the snapshot buffer), and you can enable or disable an event to be traced when a function is hit. 3) A perf clock has been added. A "perf" clock can be chosen to be used when tracing. This will cause ftrace to use the same clock as perf uses, and hopefully this will make it easier to interleave the perf and ftrace data for analysis." * tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits) tracepoints: Prevent null probe from being added tracing: Compare to 1 instead of zero for is_signed_type() tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT ftrace: Get rid of ftrace_profile_bits tracing: Check return value of tracing_init_dentry() tracing: Get rid of unneeded key calculation in ftrace_hash_move() tracing: Reset ftrace_graph_filter_enabled if count is zero tracing: Fix off-by-one on allocating stat->pages kernel: tracing: Use strlcpy instead of strncpy tracing: Update debugfs README file tracing: Fix ftrace_dump() tracing: Rename trace_event_mutex to trace_event_sem tracing: Fix comment about prefix in arch_syscall_match_sym_name() tracing: Convert trace_destroy_fields() to static tracing: Move find_event_field() into trace_events.c tracing: Use TRACE_MAX_PRINT instead of constant tracing: Use pr_warn_once instead of open coded implementation ring-buffer: Add ring buffer startup selftest tracing: Bring Documentation/trace/ftrace.txt up to date tracing: Add "perf" trace_clock ... Conflicts: kernel/trace/ftrace.c kernel/trace/trace.c
2013-04-29f2fs: add a tracepoint on f2fs_new_inodeJaegeuk Kim
This can help when debugging the free nid allocation flows. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-26KVM: Extract generic irqchip logic into irqchip.cAlexander Graf
The current irq_comm.c file contains pieces of code that are generic across different irqchip implementations, as well as code that is fully IOAPIC specific. Split the generic bits out into irqchip.c. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-24nohz: Fix unavailable tick_stop tracepoint in dynticks idleFrederic Weisbecker
The trace_tick_stop() tracepoint is only available in full dynticks. But it's also used by dynticks-idle so let's build it for the latter config as well. This fixes: kernel/time/tick-sched.c: In function tick_nohz_stop_sched_tick: kernel/time/tick-sched.c:644: error: implicit declaration of function trace_tick_stop make[2]: *** [kernel/time/tick-sched.o] Erreur 1 Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>