summaryrefslogtreecommitdiff
path: root/include/video
AgeCommit message (Collapse)Author
2012-07-29video: da8xx-fb: configure FIFO threshold to reduce underflow errorsManjunathappa, Prakash
Patch works around the below silicon errata: During LCDC initialization, there is the potential for a FIFO underflow condition to occur. A FIFO underflow condition occurs when the input FIFO is completely empty and the LCDC raster controller logic that drives data to the output pins attempts to fetch data from the FIFO. When a FIFO underflow condition occurs, incorrect data will be driven out on the LCDC data pins. Software should poll the FUF bit field in the LCD_STAT register to check if an error condition has occurred or service the interrupt if FUF_EN is enabled when FUF occurs. If the FUF bit field has been set to 1, this will indicate an underflow condition has occurred and then the software should execute a reset of the LCDC via the LPSC. This problem may occur if the LCDC FIFO threshold size (LCDDMA_CTRL[TH_FIFO_READY]) is left at its default value after reset. Increasing the FIFO threshold size will reduce or eliminate underflows. Setting the threshold size to 256 double words or larger is recommended. Above issue is described in section 2.1.3 of silicon errata http://www.ti.com/lit/er/sprz313e/sprz313e.pdf Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-07-25Merge branch 'for-florian' of git://gitorious.org/linux-omap-dss2/linux into ↵Florian Tobias Schandinat
fbdev-next Conflicts: drivers/video/omap2/dss/core.c drivers/video/omap2/dss/dispc.c
2012-07-19sh_mobile_meram: Add direct MERAM allocation APILaurent Pinchart
The API can be used to allocate and free MERAM blocks directly, without going through ICBs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-19sh_mobile_meram: Use direct function calls for the public APILaurent Pinchart
There's no reason to use abstract operation pointers to implement the MERAM API. Replace them by direct function calls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-19sh_mobile_meram: Rename operations to cache_[alloc|free|update]Laurent Pinchart
The MERAM operations meram_register, meram_unregister and meram_update handle LCDC cache. In preparation for "raw" MERAM allocation, rename them to more appropriate names. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-29OMAPDSS: DSI: Fix HSYNC, VSYNC and DE polarities between DISPC and DSIArchit Taneja
For DSI operation in videomode, DISPC logic levels for the signals HSYNC, VSYNC and DE need to be specified to DSI via the fields VP_HSYNC_POL, VP_VSYNC_POL and VP_DE_POL in DSI_CTRL registers. This information is completely internal to DSS as logic levels for the above signals hold no meaning on the DSI bus. Hence a DSI panel driver should be totally oblivious of these fields. Fix the logic levels/polarities in the DISPC and DSI registers to a default value. This is done by overriding these fields in omap_video_timings struct filled by the panel driver for DISPC, and use the equivalent default values when programming DSI_CTRL registers. Also, remove the redundant polarity related fields in omap_dss_dsi_videomode_data. Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Add interlace parameter to omap_video_timingsArchit Taneja
Add a parameter called interlace which tells whether the timings are in interlaced or progressive mode. This aligns the omap_video_timings struct with the Xorg modeline configuration. It also removes the hack needed to write to divide the manager height by 2 if the connected interface is VENC. Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Remove omap_panel_config enum from omap_dss_deviceArchit Taneja
omap_panel_config contains fields which are finally written to DISPC_POL_FREQo registers. These are now held by omap_video_timings and are set when the manager timings are applied. Remove the omap_panel_config enum, and remove all it's references from panel or interface drivers. Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Add some new fields to omap_video_timingsArchit Taneja
Some panel timing related fields are contained in omap_panel_config in the form of flags. The fields are: - Hsync logic level - Vsync logic level - Data driven on rising/falling edge of pixel clock - Output enable/Data enable logic level - HSYNC/VSYNC driven on rising/falling edge of pixel clock Out of these parameters, Hsync and Vsync logic levels are a part of the timings in the Xorg modeline configuration. So it makes sense to move the to omap_video_timings. The rest aren't a part of modeline, but it still makes sense to move these since they are related to panel timings. These fields stored in omap_panel_config in dssdev are configured for LCD panels, and the corresponding LCD managers in the DISPC_POL_FREQo registers. Add the above fields in omap_video_timings. Represent their state via new enums. Add these parameters to the omap_video_timings instances in the panel drivers. Keep the corresponding IVS, IHS, IPC, IEO, RF and ONOFF flags in omap_panel_config for now. The struct will be removed later. Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Remove passive matrix LCD support (part 3)Archit Taneja
Remove omap_lcd_display_type enum The enum omap_lcd_display_type is used to configure the lcd display type in DISPC. Remove this enum and always set display type to TFT by creating function dss_mgr_set_lcd_type_tft(). Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Remove passive matrix LCD support (part 2)Archit Taneja
Remove OMAP_DSS_LCD_TFT as a omap_panel_config flag. We don't support passive matrix displays any more. Remove this flag from all the panel drivers. Force the display_type to OMAP_DSS_LCD_DISPLAY_TFT in the interface drivers. Signed-off-by: Archit Taneja <archit@ti.com>
2012-06-29OMAPDSS: Add LCD3 overlay manager and Clock and IRQ supportChandrabhanu Mahapatra
The support for LCD3 manager has been added into the manager module. LCD3 panel has registers as DISPC_CONTROL3 and DISPC_CONFIG3 just like those in LCD and LCD2 panels. These registers control the Display Controller (DISPC) module for LCD3 output. The three LCDs support Display Serial Interface (DSI), Remote Frame Buffer Interface (RFBI) and Parallel CMOS Output Interface (DPI). These LCDs can be connected through parallel output interface using DISPC and RFBI or DPI. For serial interface DSS uses DSI. The LCD3 panel, just like LCD and LCD2 panels, has a clock switch in DSS_CTRL register which has been enabled. The clock switch chooses between DSS_CLK and DPLL_DSI1_C_CLK1 as source for LCD3_CLK. New IRQs as DISPC_IRQ_VSYNC3, DISPC_IRQ_FRAMEDONE3, DISPC_IRQ_ACBIAS_COUNT_STAT3 and DISPC_IRQ_SYNC_LOST3 have been added specific to the new manager. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-29OMAPDSS: Add support for LCD3 channelChandrabhanu Mahapatra
OMAP5 Display Subsystem (DSS) architecture comes with a additional LCD3 channel with its own dedicated overlay manager. The current patch adds LCD3 channel and basic register support for LCD3 channel. It adds register addresses for various Display Controller (DISPC) registers like DISPC_DEFAULT_COLOR, DISPC_TIMING_H, DISPC_DIVISORo, etc. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-28OMAPDSS: remove enum omap_dss_overlay_managersTomi Valkeinen
We have two almost the same enums: omap_channel and omap_dss_overlay_managers. omap_channel is used almost everywhere, and omap_channel assigns explicit values to the enum values which are needed for proper operation. omap_dss_overlay_managers is only used in one place, so it's easy to remove it, which is what this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-20fbdev: sh_mobile_lcdc: Implement overlays supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-05-27Merge tag 'omapdss-for-3.5' of git://github.com/tomba/linux into fbdev-nextFlorian Tobias Schandinat
Omapdss driver changes for 3.5 merge window. Lots of normal development commits, but perhaps most notable changes are: * HDMI rework to properly decouple the HDMI audio part from the HDMI video part. * Restructure omapdss core driver so that it's possible to implement device tree support. This included changing how platform data is passed to the drivers, changing display device registration and improving the panel driver's ability to configure the underlying video output interface. * Basic support for DSI packet interleaving
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-22OMAPDSS: DISPC: Support rotation through TILERChandrabhanu Mahapatra
TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-13video: exynos mipi dsi: support reverse panel typeDonghwa Lee
This patch adds panel_reverse variable to support reversed s6e8ax0 panel type. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13fbdev: sh_mobile_hdmi: add HDMI Control Register supportKuninori Morimoto
Latest SuperH HDMI uses not only HDMI Core Register (HTOP0) but also HDMI Control Register (HTOP1). This patch adds HDMI Control Register support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13fbdev: sh_mobile_hdmi: 32bit register access supportKuninori Morimoto
Latest SuperH HDMI allows 32bit access only. But the data is 8bit. So, we can keep compatibility by switching 8/32 bit access. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13fbdev: sh_mobile_hdmi: add interrupt output optionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-11OMAPDSS: Provide an interface for audio supportRicardo Neri
There exist several display technologies and standards that support audio as well. Hence, it is relevant to update the DSS device driver to provide an audio interface that may be used by an audio driver or any other driver interested in the functionality. The audio_enable function is intended to prepare the relevant IP for playback (e.g., enabling an audio FIFO, taking in/out of reset some IP, enabling companion chips, etc). It is intended to be called before audio_start. The audio_disable function performs the reverse operation and is intended to be called after audio_stop. While a given DSS device driver may support audio, it is possible that for certain configurations audio is not supported (e.g., an HDMI display using a VESA video timing). The audio_supported function is intended to query whether the current configuration of the display supports audio. The audio_config function is intended to configure all the relevant audio parameters of the display. In order to make the function independent of any specific DSS device driver, a struct omap_dss_audio is defined. Its purpose is to contain all the required parameters for audio configuration. At the moment, such structure contains pointers to IEC-60958 channel status word and CEA-861 audio infoframe structures. This should be enough to support HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. The omap_dss_audio structure may be extended in the future if required. The audio_enable/disable, audio_config and audio_supported functions could be implemented as functions that may sleep. Hence, they should not be called while holding a spinlock or a readlock. The audio_start/audio_stop function is intended to effectively start/stop audio playback after the configuration has taken place. These functions are designed to be used in an atomic context. Hence, audio_start should return quickly and be called only after all the needed resources for audio playback (audio FIFOs, DMA channels, companion chips, etc) have been enabled to begin data transfers. audio_stop is designed to only stop the audio transfers. The resources used for playback are released using audio_disable. A new enum omap_dss_audio_state is introduced to help the implementations of the interface to keep track of the audio state. The initial state is _DISABLED; then, the state transitions to _CONFIGURED, and then, when it is ready to play audio, to _ENABLED. The state _PLAYING is used when the audio is being rendered. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11OMAPDSS: clean up the omapdss platform data messTomi Valkeinen
The omapdss pdata handling is a mess. This is more evident when trying to use device tree for DSS, as we don't have platform data anymore in that case. This patch cleans the pdata handling by: - Remove struct omap_display_platform_data. It was used just as a wrapper for struct omap_dss_board_info. - Pass the platform data only to omapdss device. The drivers for omap dss hwmods do not need the platform data. This should also work better for DT, as we can create omapdss device programmatically in generic omap boot code, and thus we can pass the pdata to it. - Create dss functions for get_ctx_loss_count and dsi_enable/disable_pads that the dss hwmod drivers can call. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-10Merge branch 'for-l-o-3.5'Tomi Valkeinen
Conflicts: drivers/video/omap2/displays/panel-taal.c Merge OMAP DSS related board file changes. The branch will also be merged through linux-omap tree to solve conflicts.
2012-05-09OMAPDSS: DSI: implement generic DSI pin configTomi Valkeinen
In preparation for device tree, this patch changes how the DSI pins are configured. The current configuration method is only doable with board files and the configuration data is OMAP specific. This patch moves the configuration data to the panel's platform data, and the data can easily be given via DT in the future. The configuration data format is also changed to a generic one which should be suitable for all platforms. The new format is an array of pin numbers, where the array items start from clock + and -, then data1 + and -, and so on. For example: { 0, // pin num for clock lane + 1, // pin num for clock lane - 2, // pin num for data1 lane + 3, // pin num for data1 lane - ... } The pin numbers are translated by the DSI driver and used to configure the hardware appropriately. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAPDSS: TFP410: rename dvi files to tfp410Tomi Valkeinen
Now that the tfp410 driver has been renamed in the code, this patch finishes the renaming by renaming the files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAPDSS: TFP410: rename dvi -> tfp410Tomi Valkeinen
The driver for the TFP410 DPI-to-DVI chip was named quite badly as "DVI panel driver". This patch renames the code to use tfp410 name for the driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAP: board-files: remove custom PD GPIO handling for DVI outputTomi Valkeinen
Now that the panel-dvi driver handles the PD (power-down) GPIO, we can remove the custom PD handling from the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAPDSS: panel-dvi: add PD gpio handlingTomi Valkeinen
The driver for the TFP410 chip should handle the power-down signal of the chip, instead of the current way of handling it in the board files. This patch adds power_down_gpio into the device's platform data, and adds the necessary code in the driver to request and handle the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-08video: exynos_dp: fix max loop count in EQ sequence of link trainingJingoo Han
This patch fixes max loop count in EQ(Channel Equalization) sequence of link training. According to DP(displayport) specification, the max loop count in this sequence should be 5. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-29video: auo_k190x: add code shared by controller driversHeiko Stübner
The AUO-K190X controllers share a very similar set of commands and can therefore also share most of the driver code. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-23OMAPDSS: provide default get_timings function for panelsGrazvydas Ignotas
With this we can eliminate some duplicate code in panel drivers. Also lgphilips-lb035q02, nec-nl8048hl11-01b, picodlp and tpo-td043mtea1 gain support of reading timings over sysfs. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-04-23OMAPDSS: add set_min_bus_tput pointer to omapdss's platform dataTomi Valkeinen
omapdss driver needs to use the omap_pm_set_min_bus_tput(), so add a new entry for that in omapdss's platform data, and set it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@ti.com>
2012-04-22m68k/video: Create <asm/vga.h>Geert Uytterhoeven
For now, it just contains the hack for cirrusfb on Amiga, which is moved out of <video/vga.h> with some slight modifications (use raw_*() instead of z_*(), which are defined on all m68k platforms). This makes it safe to include <video/vga.h> in all contexts. Before it could fail to compile with include/video/vga.h: In function ‘vga_mm_r’: include/video/vga.h:242: error: implicit declaration of function ‘z_readb’ include/video/vga.h: In function ‘vga_mm_w’: include/video/vga.h:247: error: implicit declaration of function ‘z_writeb’ include/video/vga.h: In function ‘vga_mm_w_fast’: include/video/vga.h:253: error: implicit declaration of function ‘z_writew’ or include/video/vga.h:23:21: error: asm/vga.h: No such file or directory depending on the value of CONFIG_AMIGA. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org
2012-03-28Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-21fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_infoKuninori Morimoto
sh_mipi uses some clocks, but the method of setup depends on CPU. Current SuperH (like sh73a0) can control all of these clocks by CPG (Clock Pulse Generator). It means we can control it by clock framework only. But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS, and only sh7372 has PHYCTRL::PLLDS. But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was overwrote since the callback timing of clock setting was changed by c2658b70f06108361aa5024798f9c1bf47c73374 (fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()). To solve this issue, this patch adds extra .phyctrl. This patch adds detail explanation for unclear mipi settings and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-12fbdev: sh_mobile_meram: Remove unneeded sanity checksLaurent Pinchart
The meram_register(), meram_unregister() and meram_update() operations check that the pointers they get from the caller are not NULL. Those checks can be remove, as the caller already ensures that the pointers are valid. The platform sanity checks can also be removed, as the operations can't be accessed without valid platform data anyway. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Don't perform update in register operationLaurent Pinchart
Remove the RGB or Y/C base address update from the meram_register() operation, as this belongs to the meram_update() operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_lcdc: Don't store copy of platform dataLaurent Pinchart
Instead of copying the whole platform data structure to struct sh_mobile_lcdc_chan, store a const pointer to the channel platform data. MERAM configuration information needs to be changed at runtime, so copy it to struct sh_mobile_lcdc_chan. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Remove unused sh_mobile_meram_icb_cfg fieldsLaurent Pinchart
The marker_icb and cache_icb fields are not used anymore, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Allocate ICBs automaticallyLaurent Pinchart
Instead of manually specifying the ICBs to use in platform data, allocate them automatically at runtime. The range of reserved ICBs (for instance to be used through UIO), if any, is passed in the platform data reserved_icbs field as a bitmask. The MERAM registration function now returns a pointer to an opaque MERAM object, which is passed to the update and unregistration functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocationLaurent Pinchart
Instead of requiring the users to hardcode MERAM allocation in platform data, allocate blocks at runtime using genalloc. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Add struct sh_mobile_meram_icbLaurent Pinchart
The new structure stores ICB parameters for ICBs. Instead of modifying the struct sh_mobile_meram_cfg instances passed by callers, store the ICB parameters internally and make the public API take const pointers to sh_mobile_meram_cfg. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Make variables unsigned where applicableLaurent Pinchart
Many variables, such as loop counters, sizes and offsets, should be unsigned integers. Make them so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_meram: Add _cfg suffix to struct sh_mobile_meram_icbLaurent Pinchart
The structure describe ICB configuration, no ICB objects themselves. Rename it to sh_mobile_meram_icb_cfg in preparation for the addition of an ICB structure. All the structure fields are unsigned integers, make them so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_lcdc: Rename (lcd|num)_cfg (lcd|num)_modesLaurent Pinchart
The struct sh_mobile_lcdc_chan_cfg platform data contains a list of video modes. Name the lcd_cfg and num_cfg fields to reflect that they describe video modes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_lcdc: Merge board_cfg and lcd_size_cfg into panel_cfgLaurent Pinchart
Update board code accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-03-12fbdev: sh_mobile_lcdc: Move brightness ops to sh_mobile_lcdc_bl_infoLaurent Pinchart
Update board code accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>