summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2012-06-27bcma: define some additional cores IDsRafał Miłecki
Some of them are BCM4706 specific AFAWK. Most of them was confirmed on Netgear WNDR450. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-06-26nl80211: specify RSSI threshold in scheduled scanThomas Pedersen
Support configuring an RSSI threshold in dBm (s32) when requesting scheduled scan, below which a BSS won't be reported by the cfg80211 driver. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-22Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-06-21ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFTAvinash Patil
WMM and WPS Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-21mac80211: add command to get current rssiVictor Goldenshtein
Get current rssi (in dBm) from the driver/FW. Instead of reporting the signal received in the last rx packet, which might be inaccurate if rx traffic is low and beacon filtering is enabled, get the signal from the driver/FW. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationIntervalChun-Yeow Yeoh
As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14mac80211: implement the proactive PREQ generationChun-Yeow Yeoh
Generate the proactive PREQ element as defined in Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012 based on the selection of dot11MeshHWMPRootMode as follow: dot11MeshHWMPRootMode (2) is proactivePREQnoPREP dot11MeshHWMPRootMode (3) is proactivePREQwithPREP The proactive PREQ is generated based on the interval defined by dot11MeshHWMProotInterval. With this change, proactive RANN element is now generated if the dot11MeshHWMPRootMode is set to (4) instead of (1). Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and ↵Chun-Yeow Yeoh
dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c net/bluetooth/hci_event.c
2012-06-13Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-06-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-06-13cfg80211/nl80211: fix kernel-docJohannes Berg
Add missing entries to nl80211.h and fix the kernel-doc notation in cfg80211.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13nl80211: fix sched scan match attribute nameJohannes Berg
It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-12ieee80211: definitions for Microsoft Vendor OUI and WPA OUI typeAvinash Patil
Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11Merge tag 'nfc-next-3.6-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0
2012-06-11{nl,cfg,mac}80211: fix the coding style related to mesh parametersChun-Yeow Yeoh
fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11cfg80211: add missing kernel-doc for mesh configuration structureChun-Yeow Yeoh
Add the missing kernel-doc for mesh configuration parameters as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09mac80211: add some missing kernel-docJohannes Berg
Add a few kernel-doc descriptions that were missed during development. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09Bluetooth: Add support for encryption key refreshJohan Hedberg
With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-06mac80211: unify SW/offload remain-on-channelJohannes Berg
Redesign all the off-channel code, getting rid of the generic off-channel work concept, replacing it with a simple remain-on-channel list. This fixes a number of small issues with the ROC implementation: * offloaded remain-on-channel couldn't be queued, now we can queue it as well, if needed * in iwlwifi (the only user) offloaded ROC is mutually exclusive with scanning, use the new queue to handle that case -- I expect that it will later depend on a HW flag The bigger issue though is that there's a bad bug in the current implementation: if we get a mgmt TX request while HW roc is active, and this new request has a wait time, we actually schedule a software ROC instead since we can't guarantee the existing offloaded ROC will still be that long. To fix this, the queuing mechanism was needed. The queuing mechanism for offloaded ROC isn't yet optimal, ideally we should add API to have the HW extend the ROC if needed. We could add that later but for now use a software implementation. Overall, this unifies the behaviour between the offloaded and software-implemented case as much as possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mac80211: do remain-on-channel while idleJohannes Berg
The IDLE handling in HW off-channel is broken right now since we turn off IDLE only when the off-channel period already started. Therefore, all drivers that use it today (only iwlwifi!) must support off-channel while idle, so playing with idle isn't needed at all. Off-channel in general, since it's no longer used for authentication/association, shouldn't affect PS, so also remove that logic. Also document a small caveat for reporting TX status from off-channel frames in HW remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: validate remain-on-channel time betterJohannes Berg
The remain-on-channel time validation shouldn't depend on the value of HZ, as it does now with the check against jiffies, since then you might use a value that works on one system but not on another. Fix it by checking against a minimum that's fixed. Also add validation of the wait duration for a management frame TX since this also translates into remain-on-channel internally. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ssb: recognize ARM Cortex M3Hauke Mehrtens
I found this core on a BCM4322, a PCI card in the Linksys WRT610N V1. This core is not used by the driver, this patch just makes ssb show the correct name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to join_mesh functionJohannes Berg
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to start_ap functionJohannes Berg
Instead of setting the channel first and then starting the AP, let cfg80211 store the channel and provide it as one of the AP settings. This means that now you have to set the channel before you can start an AP interface, but since hostapd/wpa_supplicant always do that we're OK with this change. Alternatively, it's now possible to give the channel as an attribute to the start-ap nl80211 command, overriding any preset channel. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: simplify cfg80211_can_beacon_sec_chan APIJohannes Berg
Change cfg80211_can_beacon_sec_chan() to return true if there is no secondary channel to simplify all the current users of it. They all check the channel type before calling the function because it returns false if there's no secondary channel. Also actually document the return value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: remove ieee80211_get_operstate()Eliad Peller
ieee80211_get_operstate() was used by drivers in order to know whether the sta link is up, but it's no longer needed (nor used) as mac80211 notifies the drivers about authorization changes (via the sta_state callback) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Add and use ibss_vdbg debugging macroJoe Perches
Simplify the use of #ifdef CONFIG_MAC80211_IBSS_DEBUG/#endif by adding a logging macro to encapsulate the test. Convert the appropriate uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Add and use ht_vdbg debugging macroJoe Perches
Simplify the use of #ifdef CONFIG_MAC80211_HT_DEBUG/#endif by adding a logging macro to encapsulate the test. Convert the appropriate uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05nl80211: add new rssi event to indicate beacon lossEliad Peller
Tell userspace about beacon loss event. This event doesn't replace the deauth/disassoc that might come if the AP is not available. The driver can send this event in order to hint userspace what might follow (which in turn can use it as roaming trigger). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: allow low-level drivers to set netdev feature bitsArik Nemtsov
Low level drivers can now set certain netdev feature bits in netdev_features member of the ieee80211_hw struct. These will be propagated to every netdev created from this HW. The white-listed features currently include only ones related to HW checksumming. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05Bluetooth: Create empty l2cap ops functionGustavo Padovan
A2MP doesn't use part of the L2CAP chan ops API so we just create general empty function instead of the A2MP specific one. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-06-05Bluetooth: Rename L2CAP_LE_DEFAULT_MTUAndre Guedes
This patch renames L2CAP_LE_DEFAULT_MTU macro to L2CAP_LE_MIN_MTU since it represents the minimum MTU value, not the default MTU value for LE. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove unused HCI timeouts definitionsSzymon Janc
Those are not used anywhere in code (and never were since introduction in 2006) so just remove them. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Manage incoming connectionsAndrei Emeltchenko
Handle incoming A2MP connection by creating AMP manager and processing A2MP messages. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Handling fixed channelsAndrei Emeltchenko
A2MP fixed channel do not have sk Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Process A2MP Discover RequestAndrei Emeltchenko
Adds helper functions to count HCI devs and process A2MP Discover Request, code makes sure that first controller in the list is BREDR one. Trace is shown below: ... > ACL data: handle 11 flags 0x02 dlen 16 A2MP: Discover req: mtu/mps 670 mask: 0x0000 < ACL data: handle 11 flags 0x00 dlen 22 A2MP: Discover rsp: mtu/mps 670 mask: 0x0000 Controller list: id 0 type 0 (BR-EDR) status 0x01 (Bluetooth only) id 1 type 1 (802.11 AMP) status 0x01 (Bluetooth only) ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Define A2MP status codesAndrei Emeltchenko
A2MP status codes copied from Bluez patch sent by Peter Krystad <pkrystad@codeaurora.org>. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Definitions for A2MP commandsAndrei Emeltchenko
Define A2MP command IDs and packet structures. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Build and Send msg helpersAndrei Emeltchenko
Helper function to build and send A2MP messages. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: AMP Manager basic functionsAndrei Emeltchenko
Define AMP Manager and some basic functions. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: A2MP: Create A2MP channelAndrei Emeltchenko
Create and initialize fixed A2MP channel Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Add l2cap_chan->ops->ready()Andrei Emeltchenko
This move socket specific code to l2cap_sock.c. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Move clean up code and set of SOCK_ZAPPED to l2cap_sock.cAndrei Emeltchenko
This remove a bit more of socket code from l2cap core, this calls set the SOCK_ZAPPED and do some clean up depending on the socket state. Reported-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use chan as parameters for l2cap chan opsGustavo Padovan
Use chan instead of void * makes more sense here. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Define HCI AMP cmd structAndrei Emeltchenko
Add HCI commands to deal with Bluetooth AMP controllers. Those commands will be used by bluetooth and softamp code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Define and use PSM identifiersAndrei Emeltchenko
Define assigned Protocol and Service Multiplexor (PSM) identifiers and use them instead of magic numbers. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v0.10.2 at 2024-11-07 21:25:24 (GMT)