summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2012-07-22Merge tag 'regulator-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Lots and lots of fixes from Axel and some others here, plus some framework enhancements which continue the theme of factoring code out of the drivers and into the core. - Initial framework support for GPIO controlled enable signals, saving a bunch of code in drivers. - Move fixed regulator enable time and voltage mapping table specifications to data. - Used some of the recent framework enhancements to make voltage change notifications more useful, passing the voltage in as an argument to the notification. - Fixed the pattern used for finding individual regulators on a device to not rely on the node name, supporting the use of multiple PMICs of the same type in the system. - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung S2MPS11, and Wolfson Arizona microphone supplies and LDOs." * tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits) regulator: add new lp8788 regulator driver regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator regulator: tps65910: set input_supply on desc unconditionally regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data() regulator: twl: Fix list_voltate for twl6030ldo_ops regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo regulator: s5m8767: Properly handle gpio_request failure regulator: max8997: Properly handle gpio_request failure regulator: tps62360: use devm_* for gpio request regulator: tps6586x: add support for input supply regulator: tps65217: Add device tree support regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator regulator: aat2870: Convert to regulator_list_voltage_table regulator: da9052: initialize of_node param for regulator register regulator: Add REGULATOR_STATUS_UNDEFINED. regulator: Fix a typo in regulator_mode_to_status() core function. regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff regulator: s2mps11: Fix wrong setting for config.dev ...
2012-07-22Merge tag 'regmap-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A few fixes plus a few features, the most generally useful thing being the register paging support which can be used by quite a few devices: - Support for wake IRQs in regmap-irq - Support for register paging - Support for explicitly specified endianness, mostly for MMIO." * tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix incorrect arguments to kzalloc() call regmap: Add hook for printk logging for debugging during early init regmap: Fix work_buf switching for page update during virtual range access. regmap: Add support for register indirect addressing. regmap: Move lock out from internal function _regmap_update_bits(). regmap: mmio: Staticize regmap_mmio_gen_context() regmap: Remove warning on stubbed dev_get_regmap() regmap: Implement support for wake IRQs regmap: Don't try to map non-existant IRQs regmap: Constify regmap_irq_chip regmap: mmio: request native endian formatting regmap: allow busses to request formatting with specific endianness
2012-07-22Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "This tree mostly involves various APIC driver cleanups/robustization, and vSMP motivated platform callback improvements/cleanups" Fix up trivial conflict due to printk cleanup right next to return value change. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) Revert "x86/early_printk: Replace obsolete simple_strtoul() usage with kstrtoint()" x86/apic/x2apic: Use multiple cluster members for the irq destination only with the explicit affinity x86/apic/x2apic: Limit the vector reservation to the user specified mask x86/apic: Optimize cpu traversal in __assign_irq_vector() using domain membership x86/vsmp: Fix vector_allocation_domain's return value irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP x86/vsmp: Fix linker error when CONFIG_PROC_FS is not set x86/apic/es7000: Make apicid of a cluster (not CPU) from a cpumask x86/apic/es7000+summit: Always make valid apicid from a cpumask x86/apic/es7000+summit: Fix compile warning in cpu_mask_to_apicid() x86/apic: Fix ugly casting and branching in cpu_mask_to_apicid_and() x86/apic: Eliminate cpu_mask_to_apicid() operation x86/x2apic/cluster: Vector_allocation_domain() should return a value x86/apic/irq_remap: Silence a bogus pr_err() x86/vsmp: Ignore IOAPIC IRQ affinity if possible x86/apic: Make cpu_mask_to_apicid() operations check cpu_online_mask x86/apic: Make cpu_mask_to_apicid() operations return error code x86/apic: Avoid useless scanning thru a cpumask in assign_irq_vector() x86/apic: Try to spread IRQ vectors to different priority levels x86/apic: Factor out default vector_allocation_domain() operation ...
2012-07-22Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core changes from Ingo Molnar: "Continued cleanups of the core time and NTP code, plus more nohz work preparing for tick-less userspace execution." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Rework timekeeping functions to take timekeeper ptr as argument time: Move xtime_nsec adjustment underflow handling timekeeping_adjust time: Move arch_gettimeoffset() usage into timekeeping_get_ns() time: Refactor accumulation of nsecs to secs time: Condense timekeeper.xtime into xtime_sec time: Explicitly use u32 instead of int for shift values time: Whitespace cleanups per Ingo%27s requests nohz: Move next idle expiry time record into idle logic area nohz: Move ts->idle_calls incrementation into strict idle logic nohz: Rename ts->idle_tick to ts->last_tick nohz: Make nohz API agnostic against idle ticks cputime accounting nohz: Separate idle sleeping time accounting from nohz logic timers: Improve get_next_timer_interrupt() timers: Add accounting of non deferrable timers timers: Consolidate base->next_timer update timers: Create detach_if_pending() and use it
2012-07-22Merge branch 'regulator-drivers' into regulator-nextMark Brown
2012-07-22Merge branches 'regulator-core', 'regulator-dt' and 'regulator-dummy' into ↵Mark Brown
regulator-next
2012-07-22Merge branches 'regmap-core', 'regmap-irq' and 'regmap-page' into regmap-nextMark Brown
Conflicts (trivial context stuff): drivers/base/regmap/regmap.c include/linux/regmap.h
2012-07-22Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp/hotplug changes from Ingo Molnar: "Various cleanups to the SMP hotplug code - a continuing effort of Thomas et al" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot: Remove leftover declaration smp: Remove num_booting_cpus() smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]() POWERPC: Smp: remove call to ipi_call_lock()/ipi_call_unlock() SPARC: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq() ia64: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq() x86-smp-remove-call-to-ipi_call_lock-ipi_call_unlock tile: SMP: Remove call to ipi_call_lock()/ipi_call_unlock() S390: Smp: remove call to ipi_call_lock()/ipi_call_unlock() parisc: Smp: remove call to ipi_call_lock()/ipi_call_unlock() mn10300: SMP: Remove call to ipi_call_lock()/ipi_call_unlock() hexagon: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
2012-07-22Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events changes from Ingo Molnar: "- kernel side: - Intel uncore PMU support for Nehalem and Sandy Bridge CPUs, we support both the events available via the MSR and via the PCI access space. - various uprobes cleanups and restructurings - PMU driver quirks by microcode version and required x86 microcode loader cleanups/robustization - various tracing robustness updates - static keys: remove obsolete static_branch() - tooling side: - GTK browser improvements - perf report browser: support screenshots to file - more automated tests - perf kvm improvements - perf bench refinements - build environment improvements - pipe mode improvements - libtraceevent updates, we have now hopefully merged most bits with the out of tree forked code base ... and many other goodies." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (138 commits) tracing: Check for allocation failure in __tracing_open() perf/x86: Fix intel_perfmon_event_mapformatting jump label: Remove static_branch() tracepoint: Use static_key_false(), since static_branch() is deprecated perf/x86: Uncore filter support for SandyBridge-EP perf/x86: Detect number of instances of uncore CBox perf/x86: Fix event constraint for SandyBridge-EP C-Box perf/x86: Use 0xff as pseudo code for fixed uncore event perf/x86: Save a few bytes in 'struct x86_pmu' perf/x86: Add a microcode revision check for SNB-PEBS perf/x86: Improve debug output in check_hw_exists() perf/x86/amd: Unify AMD's generic and family 15h pmus perf/x86: Move Intel specific code to intel_pmu_init() perf/x86: Rename Intel specific macros perf/x86: Fix USER/KERNEL tagging of samples perf tools: Split event symbols arrays to hw and sw parts perf tools: Split out PE_VALUE_SYM parsing token to SW and HW tokens perf tools: Add empty rule for new line in event syntax parsing perf test: Use ARRAY_SIZE in parse events tests tools lib traceevent: Cleanup realloc use ...
2012-07-22Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: "Quoting from Paul, the major features of this series are: 1. Preventing latency spikes of more than 200 microseconds for kernels built with NR_CPUS=4096, which is reportedly becoming the default for some distros. This is a first step, as it does not help with systems that actually -have- 4096 CPUs (work on this case is in progress, but is not yet ready for mainline). This category also includes improving concurrency of rcu_barrier(), placed here due to conflicts. Posted to LKML at: https://lkml.org/lkml/2012/6/22/381 Note that patches 18-22 of that series have been defered to 3.7, as they have not yet proven themselves to be mainline-ready (and yes, these are the ones intended to get rid of RCU's latency spikes for systems that actually have 4096 CPUs). 2. Updates to documentation and rcutorture fixes, the latter category including improvements to rcu_barrier() testing. Posted to LKML at http://lkml.indiana.edu/hypermail/linux/kernel/1206.1/04094.html. 3. Miscellaneous fixes posted to LKML at: https://lkml.org/lkml/2012/6/22/500 with the exception of the last commit, which was posted here: http://www.gossamer-threads.com/lists/linux/kernel/1561830 4. RCU_FAST_NO_HZ fixes and improvements. Posted to LKML at: http://lkml.indiana.edu/hypermail/linux/kernel/1206.1/00006.html http://www.gossamer-threads.com/lists/linux/kernel/1561833 The first four patches of the first series went into 3.5 to fix a regression. 5. Code-style fixes. These were posted to LKML at http://lkml.indiana.edu/hypermail/linux/kernel/1205.2/01180.html http://lkml.indiana.edu/hypermail/linux/kernel/1205.2/01181.html" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) rcu: Fix broken strings in RCU's source code. rcu: Fix code-style issues involving "else" rcu: Introduce check for callback list/count mismatch rcu: Make RCU_FAST_NO_HZ respect nohz= boot parameter rcu: Fix qlen_lazy breakage rcu: Round FAST_NO_HZ lazy timeout to nearest second rcu: The rcu_needs_cpu() function is not a quiescent state rcu: Dump only the current CPU's buffers for idle-entry/exit warnings rcu: Add check for CPUs going offline with callbacks queued rcu: Disable preemption in rcu_blocking_is_gp() rcu: Prevent uninitialized string in RCU CPU stall info rcu: Fix rcu_is_cpu_idle() #ifdef in TINY_RCU rcu: Split RCU core processing out of __call_rcu() rcu: Prevent __call_rcu() from invoking RCU core on offline CPUs rcu: Make __call_rcu() handle invocation from idle rcu: Remove function versions of __kfree_rcu and __is_kfree_rcu_offset rcu: Consolidate tree/tiny __rcu_read_{,un}lock() implementations rcu: Remove return value from rcu_assign_pointer() key: Remove extraneous parentheses from rcu_assign_keypointer() rcu: Remove return value from RCU_INIT_POINTER() ...
2012-07-22Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core/iommu changes from Ingo Molnar. * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: iommu/dmar: Use pr_format() instead of PREFIX to tidy up pr_*() calls iommu/dmar: Reserve mmio space used by the IOMMU, if the BIOS forgets to iommu/dmar: Replace printks with appropriate pr_*()
2012-07-21Remove SYSTEM_SUSPEND_DISK system stateRafael J. Wysocki
The SYSTEM_SUSPEND_DISK system state is never used, so drop it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21Merge branch 'anton-kgdb' (kgdb dmesg fixups)Linus Torvalds
Merge emailed kgdb dmesg fixups patches from Anton Vorontsov: "The dmesg command appears to be broken after the printk rework. The old logic in the kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever upon entering 'dmesg' command. The first patch revives the command by switching to kmsg_dumper iterator. As a side-effect, the code is now much more simpler. A few changes were needed in the printk.c: we needed unlocked variant of the kmsg_dumper iterator, but these can surely wait for 3.6. It's probably too late even for the first patch to go to 3.5, but I'll try to convince otherwise. :-) Here we go: - The current code is broken for sure, and has no hope to work at all. It is a regression - The new code works for me, and probably works for everyone else; - If it compiles (and I urge everyone to compile-test it on your setup), it hardly can make things worse." * Merge emailed patches from Anton Vorontsov: (4 commits) kdb: Switch to nolock variants of kmsg_dump functions printk: Implement some unlocked kmsg_dump functions printk: Remove kdb_syslog_data kdb: Revive dmesg command
2012-07-21printk: Implement some unlocked kmsg_dump functionsAnton Vorontsov
If used from KDB, the locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held). So, we have to implement a few routines that grab no logbuf lock. Yet we don't need these functions in modules, so we don't export them. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull last minute Ceph fixes from Sage Weil: "The important one fixes a bug in the socket failure handling behavior that was turned up in some recent failure injection testing. The other two are minor bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: endian bug in rbd_req_cb() rbd: Fix ceph_snap_context size calculation libceph: fix messenger retry
2012-07-19Make wait_for_device_probe() also do scsi_complete_async_scans()Linus Torvalds
Commit a7a20d103994 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d0137 ("fix async probe regression"), so that same commit a7a20d103994 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-18Merge branch 'linus' into timers/coreIngo Molnar
Resolve semantic conflict in kernel/time/timekeeping.c. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-18Merge branch 'linus' into perf/coreIngo Molnar
Pick up the latest ring-buffer fixes, before applying a new fix. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-18libceph: fix messenger retrySage Weil
In ancient times, the messenger could both initiate and accept connections. An artifact if that was data structures to store/process an incoming ceph_msg_connect request and send an outgoing ceph_msg_connect_reply. Sadly, the negotiation code was referencing those structures and ignoring important information (like the peer's connect_seq) from the correct ones. Among other things, this fixes tight reconnect loops where the server sends RETRY_SESSION and we (the client) retries with the same connect_seq as last time. This bug pretty easily triggered by injecting socket failures on the MDS and running some fs workload like workunits/direct_io/test_sync_io. Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-17Merge tag 'pm-post-3.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull a last-minute PM update from Rafael J. Wysocki: "This renames CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND to encourage future reuse of the capability in question in related cases." * tag 'pm-post-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND
2012-07-17PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPENDMichael Kerrisk
As discussed in http://thread.gmane.org/gmane.linux.kernel/1249726/focus=1288990, the capability introduced in 4d7e30d98939a0340022ccd49325a3d70f7e0238 to govern EPOLLWAKEUP seems misnamed: this capability is about governing the ability to suspend the system, not using a particular API flag (EPOLLWAKEUP). We should make the name of the capability more general to encourage reuse in related cases. (Whether or not this capability should also be used to govern the use of /sys/power/wake_lock is a question that needs to be separately resolved.) This patch renames the capability to CAP_BLOCK_SUSPEND. In order to ensure that the old capability name doesn't make it out into the wild, could you please apply and push up the tree to ensure that it is incorporated for the 3.5 release. Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) IPVS oops'ers: a) Should not reset skb->nf_bridge in forwarding hook (Lin Ming) b) 3.4 commit can cause ip_vs_control_cleanup to be invoked after the ipvs_core_ops are unregistered during rmmod (Julian ANastasov) 2) ixgbevf bringup failure can crash in TX descriptor cleanup (Alexander Duyck) 3) AX25 switch missing break statement hoses ROSE sockets (Alan Cox) 4) CAIF accesses freed per-net memory (Sjur Brandeland) 5) Network cgroup code has out-or-bounds accesses (Eric DUmazet), and accesses freed memory (Gao Feng) 6) Fix a crash in SCTP reported by Dave Jones caused by freeing an association still on a list (Neil HOrman) 7) __netdev_alloc_skb() regresses on GFP_DMA using drivers because that GFP flag is not being retained for the allocation (Eric Dumazet). 8) Missing NULL hceck in sch_sfb netlink message parsing (Alan Cox) 9) bnx2 crashes because TX index iteration is not bounded correctly (Michael Chan) 10) IPoIB generates warnings in TCP queue collapsing (via skb_try_coalesce) because it does not set skb->truesize correctly (Eric Dumazet) 11) vlan_info objects leak for the implicit vlan with ID 0 (Amir Hanania) 12) A fix for TX time stamp handling in gianfar does not transfer socket ownership from one packet to another correctly, resulting in a socket write space imbalance (Eric Dumazet) 13) Julia Lawall found several cases where we do a list iteration, and then at the loop termination unconditionally assume we ended up with real list object, rather than the list head itself (CNIC, RXRPC, mISDN). 14) The bonding driver handles procfs moving incorrectly when a device it manages is moved from one namespace to another (Eric Biederman) 15) Missing memory barriers in stmmac descriptor accesses result in various crashes (Deepak Sikri) 16) Fix handling of broadcast packets in batman-adv (Simon Wunderlich) 17) Properly check the sanity of sendmsg() lengths in ieee802154's dgram_sendmsg(). Dave Jones and others have hit and reported this bug (Sasha Levin) 18) Some drivers (b44 and b43legacy) on 64-bit machines stopped working because of how netdev_alloc_skb() was adjusted. Such drivers should now use alloc_skb() for obtaining bounce buffers. (Eric Dumazet) 19) atl1c mis-managed it's link state in that it stops the queue by hand on link down. The generic networking takes care of that and this double stop locks the queue down. So simply removing the driver's queue stop call fixes the problem (Cloud Ren) 20) Fix out-of-memory due to mis-accounting in net_em packet scheduler (Eric Dumazet) 21) If DCB and SR-IOV are configured at the same time in IXGBE the chip will hang because this is not supported (Alexander Duyck) 22) A commit to stop drivers using netdev->base_addr broke the CNIC driver (Michael Chan) 23) Timeout regression in ipset caused by an attempt to fix an overflow bug (Jozsef Kadlecsik). 24) mac80211 minstrel code allocates memory using incorrect size (Thomas Huehn) 25) llcp_sock_getname() needs to check for a NULL device otherwise we OOPS (Sasha Levin) 26) mwifiex leaks memory (Bing Zhao) 27) Propagate iwlwifi fix to iwlegacy, even when we're not associated we need to monitor for stuck queues in the watchdog handler (Stanislaw Geuszka) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) ipvs: fix oops in ip_vs_dst_event on rmmod ipvs: fix oops on NAT reply in br_nf context ixgbevf: Fix panic when loading driver ax25: Fix missing break MAINTAINERS: reflect actual changes in IEEE 802.15.4 maintainership caif: Fix access to freed pernet memory net: cgroup: fix access the unallocated memory in netprio cgroup ixgbevf: Prevent RX/TX statistics getting reset to zero sctp: Fix list corruption resulting from freeing an association on a list net: respect GFP_DMA in __netdev_alloc_skb() e1000e: fix test for PHY being accessible on 82577/8/9 and I217 e1000e: Correct link check logic for 82571 serdes sch_sfb: Fix missing NULL check bnx2: Fix bug in bnx2_free_tx_skbs(). IPoIB: fix skb truesize underestimatiom net: Fix memory leak - vlan_info struct gianfar: fix potential sk_wmem_alloc imbalance drivers/net/ethernet/broadcom/cnic.c: remove invalid reference to list iterator variable net/rxrpc/ar-peer.c: remove invalid reference to list iterator variable drivers/isdn/mISDN/stack.c: remove invalid reference to list iterator variable ...
2012-07-17Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping fixes from Marek Szyprowski: "Another set of minor fixups for recently merged Contiguous Memory Allocator and ARM DMA-mapping changes. Those patches fix mysterious crashes on systems with CMA and Himem enabled as well as some corner cases caused by typical off-by-one bug." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: modify condition check while freeing pages mm: cma: fix condition check when setting global cma area mm: cma: don't replace lowmem pages with highmem
2012-07-17regulator: tps65910: set input_supply on desc unconditionallyLaxman Dewangan
Set the supply_name in the regulator descriptor unconditionally and make this parameter as required parameter in the device node for successfully registration of the regulator. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-17ipvs: fix oops on NAT reply in br_nf contextLin Ming
IPVS should not reset skb->nf_bridge in FORWARD hook by calling nf_reset for NAT replies. It triggers oops in br_nf_forward_finish. [ 579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.781792] PGD 218f9067 PUD 0 [ 579.781865] Oops: 0000 [#1] SMP [ 579.781945] CPU 0 [ 579.781983] Modules linked in: [ 579.782047] [ 579.782080] [ 579.782114] Pid: 4644, comm: qemu Tainted: G W 3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard /30E8 [ 579.782300] RIP: 0010:[<ffffffff817b1ca5>] [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.782455] RSP: 0018:ffff88007b003a98 EFLAGS: 00010287 [ 579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a [ 579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00 [ 579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90 [ 579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02 [ 579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000 [ 579.783177] FS: 0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70 [ 579.783306] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0 [ 579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760) [ 579.783919] Stack: [ 579.783959] ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00 [ 579.784110] ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7 [ 579.784260] ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0 [ 579.784477] Call Trace: [ 579.784523] <IRQ> [ 579.784562] [ 579.784603] [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8 [ 579.784707] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.784797] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.784906] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.784995] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.785175] [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b [ 579.785179] [<ffffffff817ac417>] __br_forward+0x97/0xa2 [ 579.785179] [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257 [ 579.785179] [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb [ 579.785179] [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1 [ 579.785179] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54 [ 579.785179] [<ffffffff817ad62a>] br_handle_frame+0x213/0x229 [ 579.785179] [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257 [ 579.785179] [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1 [ 579.785179] [<ffffffff816e69fc>] process_backlog+0x99/0x1e2 [ 579.785179] [<ffffffff816e6800>] net_rx_action+0xdf/0x242 [ 579.785179] [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0 [ 579.785179] [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 579.785179] [<ffffffff8188812c>] call_softirq+0x1c/0x30 The steps to reproduce as follow, 1. On Host1, setup brige br0(192.168.1.106) 2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd 3. Start IPVS service on Host1 ipvsadm -A -t 192.168.1.106:80 -s rr ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m 4. Run apache benchmark on Host2(192.168.1.101) ab -n 1000 http://192.168.1.106/ ip_vs_reply4 ip_vs_out handle_response ip_vs_notrack nf_reset() { skb->nf_bridge = NULL; } Actually, IPVS wants in this case just to replace nfct with untracked version. So replace the nf_reset(skb) call in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-07-15Merge tag 'v3.5-rc7' into regulator-driversMark Brown
Linux 3.5-rc7
2012-07-15Merge branch 'timers/urgent' into timers/coreThomas Gleixner
Reason: Update to upstream changes to avoid further conflicts. Fixup a trivial merge conflict in kernel/time/tick-sched.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-14Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU, perf, and scheduler fixes from Ingo Molnar. The RCU fix is a revert for an optimization that could cause deadlocks. One of the scheduler commits (164c33c6adee "sched: Fix fork() error path to not crash") is correct but not complete (some architectures like Tile are not covered yet) - the resulting additional fixes are still WIP and Ingo did not want to delay these pending fixes. See this thread on lkml: [PATCH] fork: fix error handling in dup_task() The perf fixes are just trivial oneliners. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf kvm: Fix segfault with report and mixed guestmount use perf kvm: Fix regression with guest machine creation perf script: Fix format regression due to libtraceevent merge ring-buffer: Fix accounting of entries when removing pages ring-buffer: Fix crash due to uninitialized new_pages list head * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS/sched: Update scheduler file pattern sched/nohz: Rewrite and fix load-avg computation -- again sched: Fix fork() error path to not crash
2012-07-13Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the leap second fixes from Thomas Gleixner: "It's a rather large series, but well discussed, refined and reviewed. It got a massive testing by John, Prarit and tip. In theory we could split it into two parts. The first two patches f55a6faa3843: hrtimer: Provide clock_was_set_delayed() 4873fa070ae8: timekeeping: Fix leapsecond triggered load spike issue are merely preventing the stuff loops forever issues, which people have observed. But there is no point in delaying the other 4 commits which achieve full correctness into 3.6 as they are tagged for stable anyway. And I rather prefer to have the full fixes merged in bulk than a "prevent the observable wreckage and deal with the hidden fallout later" approach." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Update hrtimer base offsets each hrtimer_interrupt timekeeping: Provide hrtimer update function hrtimers: Move lock held region in hrtimer_interrupt() timekeeping: Maintain ktime_t based offsets for hrtimers timekeeping: Fix leapsecond triggered load spike issue hrtimer: Provide clock_was_set_delayed()
2012-07-12regulator: tps65217: Add device tree supportAnilKumar Ch
This commit adds device tree support for tps65217 pmic. And usage details are added to device tree documentation. Driver is tested by using kernel module with regulator set and get APIs. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: Add REGULATOR_STATUS_UNDEFINED.Krystian Garbaciak
REGULATOR_STATUS_UNDEFINED is to be returned by regulator, if any other state doesn't really apply. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: tps65910: Remvoe ↵Axel Lin
tps65910_reg_[read|modify_bits|read_locked|write_locked] functions The tps65910 mfd driver has been converted to regmap APIs. This patch adds tps65910_reg_update_bits() in include/linux/mfd/tps65910.h. Thus we can use tps65910_reg_read/tps65910_reg_write/tps65910_reg_update_bits directly and remove tps65910_reg_[read|modify_bits|read_locked|write_locked] functions. With this change, we can also remove the mutex in struct tps65910_reg. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge random patches from Andrew Morton. * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits) memblock: free allocated memblock_reserved_regions later mm: sparse: fix usemap allocation above node descriptor section mm: sparse: fix section usemap placement calculation xtensa: fix incorrect memset shmem: cleanup shmem_add_to_page_cache shmem: fix negative rss in memcg memory.stat tmpfs: revert SEEK_DATA and SEEK_HOLE drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT fat: fix non-atomic NFS i_pos read MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section sgi-xp: nested calls to spin_lock_irqsave() fs: ramfs: file-nommu: add SetPageUptodate() drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails h8300/uaccess: add mising __clear_user() h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user() h8300/time: add missing #include <asm/irq_regs.h> h8300/signal: fix typo "statis" h8300/pgtable: add missing #include <asm-generic/pgtable.h> drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled ...
2012-07-11memblock: free allocated memblock_reserved_regions laterYinghai Lu
memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mm: sparse: fix usemap allocation above node descriptor sectionYinghai Lu
After commit f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint in alloc_bootmem_section"), usemap allocations may easily be placed outside the optimal section that holds the node descriptor, even if there is space available in that section. This results in unnecessary hotplug dependencies that need to have the node unplugged before the section holding the usemap. The reason is that the bootmem allocator doesn't guarantee a linear search starting from the passed allocation goal but may start out at a much higher address absent an upper limit. Fix this by trying the allocation with the limit at the section end, then retry without if that fails. This keeps the fix from f5bf18fa22f8 of not panicking if the allocation does not fit in the section, but still makes sure to try to stay within the section at first. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.3.x, 3.4.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11memory hotplug: fix invalid memory access caused by stale kswapd pointerJiang Liu
kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11timekeeping: Provide hrtimer update functionThomas Gleixner
To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-11hrtimer: Provide clock_was_set_delayed()John Stultz
clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by: John Stultz <johnstul@us.ibm.com> Reported-by: Jan Engelhardt <jengelh@inai.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of three fixes for data corruption (libsas task file), oops causing (NULL in scsi_cmd_to_driver) and driver failure (bnx2i). The oops caused by the NULL in scsi_cmd_to_driver() manifests in scsi_eh_send_cmd() and has been seen by several people now. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] bnx2i: Removed the reference to the netdev->base_addr [SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf [SCSI] Fix NULL dereferences in scsi_cmd_to_driver
2012-07-11Merge tag 'usb-3.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a few fixes and new device ids for the 3.5-rc6 tree. The PCI changes resolve a long-standing issue with resuming some EHCI controllers. It has been acked by the PCI maintainer, and he asked for it to go through my USB tree instead of his. The xhci patches also resolve a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: PCI: EHCI: fix crash during suspend on ASUS computers USB: cdc-wdm: fix lockup on error in wdm_read USB: metro-usb: fix tty_flip_buffer_push use USB: option: Add MEDIATEK product ids USB: option: add ZTE MF60 xhci: Fix hang on back-to-back Set TR Deq Ptr commands. usb: Add support for root hub port status CAS
2012-07-10Merge tag 'fixes-for-v3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yes, this is a *LATE* GPIO pull request with fixes for v3.5. Grant moved across the planet and accidentally fell off the grid, so he asked me to take over the GPIO merges for a while 10 days ago. Since then I went over the archives and collected this pile of fixes, and pulled two of them from the TI maintainer Kevin Hilman. Then waited for them to at least hit linux-next once or twice." GPIO fixes for v3.5: - Invalid context restore on bank 0 for OMAP driver in runtime suspend/resume cycle - Check for NULL platform data in sta-2x11 driver - Constrain selection of the V1 MSM GPIO driver to applicable platforms (Kconfig issue) - Make sure the correct output value is set in the wm8994 driver - Export devm_gpio_request_one() so it can be used in modules. Apparently some in-kernel modules can be configured to use this leading to breakage. - Check that the GPIO is valid in the lantiq driver - Fix the flag bits introduced for v3.5, so they don't overlap - Fix a device tree intialization bug for imx21-compatible devices - Carry over the OF node to the TPS65910 GPIO chip struct * tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65910: initialize of_node of gpio_chip gpio/mxc: make irqs work for fsl,imx21-gpio devices gpio: fix bits conflict for gpio flags mips: pci-lantiq: Fix check for valid gpio gpio: export devm_gpio_request_one gpiolib: wm8994: Pay attention to the value set when enabling as output gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs gpio-sta2x11: don't use pdata if null gpio/omap: fix invalid context restore of gpio bank-0 gpio/omap: fix irq loss while in idle with debounce on
2012-07-10PCI: EHCI: fix crash during suspend on ASUS computersAlan Stern
Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728 Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Javier Marcet <jmarcet@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Oleksij Rempel <bug-track@fisher-privat.net> Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: stable <stable@vger.kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09Merge tag 'rpmsg-3.5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg Pull rpmsg fixes from Ohad Ben-Cohen: "Fixing two (somewhat rare) endpoint-related race issues, both of which were reported by Fernando Guzman Lugo." * tag 'rpmsg-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg: rpmsg: make sure inflight messages don't invoke just-removed callbacks rpmsg: avoid premature deallocation of endpoints
2012-07-09netfilter: nf_ct_ecache: fix crash with multiple containers, one shutting downPablo Neira Ayuso
Hans reports that he's still hitting: BUG: unable to handle kernel NULL pointer dereference at 000000000000027c IP: [<ffffffff813615db>] netlink_has_listeners+0xb/0x60 PGD 0 Oops: 0000 [#3] PREEMPT SMP CPU 0 It happens when adding a number of containers with do: nfct_query(h, NFCT_Q_CREATE, ct); and most likely one namespace shuts down. this problem was supposed to be fixed by: 70e9942 netfilter: nf_conntrack: make event callback registration per-netns Still, it was missing one rcu_access_pointer to check if the callback is set or not. Reported-by: Hans Schillstrom <hans@schillstrom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-07-08[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtfDan Williams
fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Cc: <stable@vger.kernel.org> Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08[SCSI] Fix NULL dereferences in scsi_cmd_to_driverMark Rustad
Avoid crashing if the private_data pointer happens to be NULL. This has been seen sometimes when a host reset happens, notably when there are many LUNs: host3: Assigned Port ID 0c1601 scsi host3: libfc: Host reset succeeded on port (0c1601) BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 <snip> Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0) Stack: 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80 Call Trace: [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0 [<ffffffff8106ec3e>] kthread+0x9e/0xb0 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81509260>] ? gs_change+0x13/0x13 Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c RIP [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 RSP <ffff88030920dc50> CR2: 0000000000000350 Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-07security: Minor improvements to no_new_privs documentationAndy Lutomirski
The documentation didn't actually mention how to enable no_new_privs. This also adds a note about possible interactions between no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs is not necessarily a good idea), and it references the new docs from include/linux/prctl.h. Suggested-by: Rob Landley <rob@landley.net> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-07-06regulator: tps65910: add support for input supplyLaxman Dewangan
There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 Pull ocfs2 fixes from Joel Becker. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: aio: make kiocb->private NUll in init_sync_kiocb() ocfs2: Fix bogus error message from ocfs2_global_read_info ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed. ocfs2: use spinlock irqsave for downconvert lock.patch ocfs2: Misplaced parens in unlikley ocfs2: clear unaligned io flag when dio fails
2012-07-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Two fixes for regressions in Wacom driver and fixes for drivers using threaded IRQ framework without specifying IRQF_ONESHOT." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: request threaded-only IRQs with IRQF_ONESHOT Input: wacom - don't retrieve touch_max when it is predefined Input: wacom - fix retrieving touch_max bug Input: fix input.h kernel-doc warning