Age | Commit message (Collapse) | Author |
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The processing of softirqs in irq thread context is a performance gain
for the non-rt workloads of a system, but it's counterproductive for
interrupts which are explicitely related to the realtime
workload. Allow such interrupts to prevent softirq processing in their
thread context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
When CONFIG_PREEMPT_RT_FULL is enabled, tasklets run as threads,
and spinlocks turn are mutexes. But this can cause issues with
tasks disabling tasklets. A tasklet runs under ksoftirqd, and
if a tasklets are disabled with tasklet_disable(), the tasklet
count is increased. When a tasklet runs, it checks this counter
and if it is set, it adds itself back on the softirq queue and
returns.
The problem arises in RT because ksoftirq will see that a softirq
is ready to run (the tasklet softirq just re-armed itself), and will
not sleep, but instead run the softirqs again. The tasklet softirq
will still see that the count is non-zero and will not execute
the tasklet and requeue itself on the softirq again, which will
cause ksoftirqd to run it again and again and again.
It gets worse because ksoftirqd runs as a real-time thread.
If it preempted the task that disabled tasklets, and that task
has migration disabled, or can't run for other reasons, the tasklet
softirq will never run because the count will never be zero, and
ksoftirqd will go into an infinite loop. As an RT task, it this
becomes a big problem.
This is a hack solution to have tasklet_disable stop tasklets, and
when a tasklet runs, instead of requeueing the tasklet softirqd
it delays it. When tasklet_enable() is called, and tasklets are
waiting, then the tasklet_enable() will kick the tasklets to continue.
This prevents the lock up from ksoftirq going into an infinite loop.
[ rostedt@goodmis.org: ported to 3.0-rt ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
<NMI> [<ffffffff812dafd8>] spin_bug+0x94/0xa8
[<ffffffff812db07f>] do_raw_spin_lock+0x43/0xea
[<ffffffff814fa9be>] _raw_spin_lock_irqsave+0x6b/0x85
[<ffffffff8106ff9e>] ? migrate_disable+0x75/0x12d
[<ffffffff81078aaf>] ? pin_current_cpu+0x36/0xb0
[<ffffffff8106ff9e>] migrate_disable+0x75/0x12d
[<ffffffff81115b9d>] pagefault_disable+0xe/0x1f
[<ffffffff81047027>] copy_from_user_nmi+0x74/0xe6
[<ffffffff810489d7>] perf_callchain_user+0xf3/0x135
Now clearly we can't go around taking locks from NMI context, cure
this by short-circuiting migrate_disable() when we're in an atomic
context already.
Add some extra debugging to avoid things like:
preempt_disable()
migrate_disable();
preempt_enable();
migrate_enable();
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1314967297.1301.14.camel@twins
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-wbot4vsmwhi8vmbf83hsclk6@git.kernel.org
|
|
Make migrate_disable() be a preempt_disable() for !rt kernels. This
allows generic code to use it but still enforces that these code
sections stay relatively small.
A preemptible migrate_disable() accessible for general use would allow
people growing arbitrary per-cpu crap instead of clean these things
up.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-275i87sl8e1jcamtchmehonm@git.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
get_online_cpus() is a heavy weight function which involves a global
mutex. migrate_disable() wants a simpler construct which prevents only
a CPU from going doing while a task is in a migrate disabled section.
Implement a per cpu lockless mechanism, which serializes only in the
real unplug case on a global mutex. That serialization affects only
tasks on the cpu which should be brought down.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Needs thread context (pgd_lock) -> ifdeffed. workqueues wont work with
RT
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
posix-cpu-timer code takes non -rt safe locks in hard irq
context. Move it to a thread.
[ 3.0 fixes from Peter Zijlstra <peterz@infradead.org> ]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In preempt-rt we can not call the callbacks which take sleeping locks
from the timer interrupt context.
Bring back the softirq split for now, until we fixed the signal
delivery problem for real.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make cancellation of a running callback in softirq context safe
against preemption.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When softirqs can be preempted we need to make sure that cancelling
the timer from the active thread can not deadlock vs. a running timer
callback. Add a waitqueue to resolve that.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
He below is a boot-tested hack to shrink the page frame size back to
normal.
Should be a net win since there should be many less PTE-pages than
page-frames.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Drop recursive call to migrate_disabel/enable for local_*lock* api
reported by Steven Rostedt.
local_lock will call migrate_disable via get_local_var - call tree is
get_locked_var
`-> local_lock(lvar)
`-> __local_lock(&get_local_var(lvar));
`--> # define get_local_var(var) (*({
migrate_disable();
&__get_cpu_var(var); })) \
thus there should be no need to call migrate_disable/enable recursively in
spin_try/lock/unlock. This patch addes a spin_trylock_local and replaces
the migration disabling calls by the local calls.
This patch is incomplete as it does not yet cover the _irq/_irqsave variants
by local locks. This patch requires the API cleanup in kernel/softirq.c or
it would break softirq_lock/unlock with respect to migration.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Joe Korty reported, that __irq_set_affinity_locked() schedules a
workqueue while holding a rawlock which results in a might_sleep()
warning.
This patch moves the invokation into a process context so that we only
wakeup() a process while holding the lock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
As per changes in include/linux/jbd_common.h for avoiding the
bit_spin_locks on RT ("fs: jbd/jbd2: Make state lock and journal
head lock rt safe") we do the same thing here.
We use the non atomic __set_bit and __clear_bit inside the scope of
the lock to preserve the ability of the existing LIST_DEBUG code to
use the zero'th bit in the sanity checks.
As a bit spinlock, we had no lockdep visibility into the usage
of the list head locking. Now, if we were to implement it as a
standard non-raw spinlock, we would see:
BUG: sleeping function called from invalid context at kernel/rtmutex.c:658
in_atomic(): 1, irqs_disabled(): 0, pid: 122, name: udevd
5 locks held by udevd/122:
#0: (&sb->s_type->i_mutex_key#7/1){+.+.+.}, at: [<ffffffff811967e8>] lock_rename+0xe8/0xf0
#1: (rename_lock){+.+...}, at: [<ffffffff811a277c>] d_move+0x2c/0x60
#2: (&dentry->d_lock){+.+...}, at: [<ffffffff811a0763>] dentry_lock_for_move+0xf3/0x130
#3: (&dentry->d_lock/2){+.+...}, at: [<ffffffff811a0734>] dentry_lock_for_move+0xc4/0x130
#4: (&dentry->d_lock/3){+.+...}, at: [<ffffffff811a0747>] dentry_lock_for_move+0xd7/0x130
Pid: 122, comm: udevd Not tainted 3.4.47-rt62 #7
Call Trace:
[<ffffffff810b9624>] __might_sleep+0x134/0x1f0
[<ffffffff817a24d4>] rt_spin_lock+0x24/0x60
[<ffffffff811a0c4c>] __d_shrink+0x5c/0xa0
[<ffffffff811a1b2d>] __d_drop+0x1d/0x40
[<ffffffff811a24be>] __d_move+0x8e/0x320
[<ffffffff811a278e>] d_move+0x3e/0x60
[<ffffffff81199598>] vfs_rename+0x198/0x4c0
[<ffffffff8119b093>] sys_renameat+0x213/0x240
[<ffffffff817a2de5>] ? _raw_spin_unlock+0x35/0x60
[<ffffffff8107781c>] ? do_page_fault+0x1ec/0x4b0
[<ffffffff817a32ca>] ? retint_swapgs+0xe/0x13
[<ffffffff813eb0e6>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8119b0db>] sys_rename+0x1b/0x20
[<ffffffff817a3b96>] system_call_fastpath+0x1a/0x1f
Since we are only taking the lock during short lived list operations,
lets assume for now that it being raw won't be a significant latency
concern.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
bit_spin_locks break under RT.
Based on a previous patch from Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
--
include/linux/buffer_head.h | 10 ++++++++++
include/linux/jbd_common.h | 24 ++++++++++++++++++++++++
2 files changed, 34 insertions(+)
|
|
Wrap the bit_spin_lock calls into a separate inline and add the RT
replacements with a real spinlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Bit spinlocks are not working on RT. Replace them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
RT needs a few preempt_disable/enable points which are not necessary
otherwise. Implement variants to avoid #ifdeffery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add local_irq_*_(no)rt variant which are mainly used to break
interrupt disabled sections on PREEMPT_RT or to explicitely disable
interrupts on PREEMPT_RT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This patch provides a recording mechanism to store data of potential
sources of system latencies. The recordings separately determine the
latency caused by a delayed timer expiration, by a delayed wakeup of the
related user space program and by the sum of both. The histograms can be
enabled and reset individually. The data are accessible via the debug
filesystem. For details please consult Documentation/trace/histograms.txt.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
timekeeping suspend/resume calls read_persistant_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a temporary workaround we disable the might sleep warnings by
setting system_state to SYSTEM_SUSPEND before calling sysdev_suspend()
and restoring it to SYSTEM_RUNNING afer sysdev_resume().
Needs to be revisited.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Adding migrate_disable() to pagefault_disable() to preserve the
per-cpu thing for kmap_atomic might not have been the best of choices.
But short of adding preempt_disable/migrate_disable foo all over the
kmap code it still seems the best way.
It does however yield the below borkage as well as wreck !-rt builds
since !-rt does rely on pagefault_disable() not preempting. So fix all
that up by adding raw_pagefault_disable().
<NMI> [<ffffffff81076d5c>] warn_slowpath_common+0x85/0x9d
[<ffffffff81076e17>] warn_slowpath_fmt+0x46/0x48
[<ffffffff814f7fca>] ? _raw_spin_lock+0x6c/0x73
[<ffffffff810cac87>] ? watchdog_overflow_callback+0x9b/0xd0
[<ffffffff810caca3>] watchdog_overflow_callback+0xb7/0xd0
[<ffffffff810f51bb>] __perf_event_overflow+0x11c/0x1fe
[<ffffffff810f298f>] ? perf_event_update_userpage+0x149/0x151
[<ffffffff810f2846>] ? perf_event_task_disable+0x7c/0x7c
[<ffffffff810f5b7c>] perf_event_overflow+0x14/0x16
[<ffffffff81046e02>] x86_pmu_handle_irq+0xcb/0x108
[<ffffffff814f9a6b>] perf_event_nmi_handler+0x46/0x91
[<ffffffff814fb2ba>] notifier_call_chain+0x79/0xa6
[<ffffffff814fb34d>] __atomic_notifier_call_chain+0x66/0x98
[<ffffffff814fb2e7>] ? notifier_call_chain+0xa6/0xa6
[<ffffffff814fb393>] atomic_notifier_call_chain+0x14/0x16
[<ffffffff814fb3c3>] notify_die+0x2e/0x30
[<ffffffff814f8f75>] do_nmi+0x7e/0x22b
[<ffffffff814f8bca>] nmi+0x1a/0x2c
[<ffffffff814fb130>] ? sub_preempt_count+0x4b/0xaa
<<EOE>> <IRQ> [<ffffffff812d44cc>] delay_tsc+0xac/0xd1
[<ffffffff812d4399>] __delay+0xf/0x11
[<ffffffff812d95d9>] do_raw_spin_lock+0xd2/0x13c
[<ffffffff814f813e>] _raw_spin_lock_irqsave+0x6b/0x85
[<ffffffff8106772a>] ? task_rq_lock+0x35/0x8d
[<ffffffff8106772a>] task_rq_lock+0x35/0x8d
[<ffffffff8106fe2f>] migrate_disable+0x65/0x12c
[<ffffffff81114e69>] pagefault_disable+0xe/0x1f
[<ffffffff81039c73>] dump_trace+0x21f/0x2e2
[<ffffffff8103ad79>] show_trace_log_lvl+0x54/0x5d
[<ffffffff8103ad97>] show_trace+0x15/0x17
[<ffffffff814f4f5f>] dump_stack+0x77/0x80
[<ffffffff812d94b0>] spin_bug+0x9c/0xa3
[<ffffffff81067745>] ? task_rq_lock+0x50/0x8d
[<ffffffff812d954e>] do_raw_spin_lock+0x47/0x13c
[<ffffffff814f7fbe>] _raw_spin_lock+0x60/0x73
[<ffffffff81067745>] ? task_rq_lock+0x50/0x8d
[<ffffffff81067745>] task_rq_lock+0x50/0x8d
[<ffffffff8106fe2f>] migrate_disable+0x65/0x12c
[<ffffffff81114e69>] pagefault_disable+0xe/0x1f
[<ffffffff81039c73>] dump_trace+0x21f/0x2e2
[<ffffffff8104369b>] save_stack_trace+0x2f/0x4c
[<ffffffff810a7848>] save_trace+0x3f/0xaf
[<ffffffff810aa2bd>] mark_lock+0x228/0x530
[<ffffffff810aac27>] __lock_acquire+0x662/0x1812
[<ffffffff8103dad4>] ? native_sched_clock+0x37/0x6d
[<ffffffff810a790e>] ? trace_hardirqs_off_caller+0x1f/0x99
[<ffffffff810693f6>] ? sched_rt_period_timer+0xbd/0x218
[<ffffffff810ac403>] lock_acquire+0x145/0x18a
[<ffffffff810693f6>] ? sched_rt_period_timer+0xbd/0x218
[<ffffffff814f7f9e>] _raw_spin_lock+0x40/0x73
[<ffffffff810693f6>] ? sched_rt_period_timer+0xbd/0x218
[<ffffffff810693f6>] sched_rt_period_timer+0xbd/0x218
[<ffffffff8109aa39>] __run_hrtimer+0x1e4/0x347
[<ffffffff81069339>] ? can_migrate_task.clone.82+0x14a/0x14a
[<ffffffff8109b97c>] hrtimer_interrupt+0xee/0x1d6
[<ffffffff814fb23d>] ? add_preempt_count+0xae/0xb2
[<ffffffff814ffb38>] smp_apic_timer_interrupt+0x85/0x98
[<ffffffff814fef13>] apic_timer_interrupt+0x13/0x20
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-31keae8mkjiv8esq4rl76cib@git.kernel.org
|
|
Wrap the test for pagefault_disabled() into a helper, this allows us
to remove the need for current->pagefault_disabled on !-rt kernels.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3yy517m8zsi9fpsf14xfaqkw@git.kernel.org
|
|
Add a pagefault_disabled variable to task_struct to allow decoupling
the pagefault-disabled logic from the preempt count.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.
When CONFIG_PREEMPT_RT_FULL is enabled, spin_locks become mutexes, and
one of these is the spin lock used in signal handling.
Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spin lock that has been converted to a mutex
and has the possibility to sleep. If this happens, the above issues with
the corrupted stack is possible.
Instead of calling the signal right away, for PREEMPT_RT and x86_64,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.
[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT_FULL to
ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
Cc: stable-rt@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|