summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2006-10-04[PATCH] genirq: irq: add moved_masked_irqEric W. Biederman
Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: irq: convert the move_irq flag from a 32bit word to a single bitEric W. Biederman
The primary aim of this patchset is to remove maintenances problems caused by the irq infrastructure. The two big issues I address are an artificially small cap on the number of irqs, and that MSI assumes vector == irq. My primary focus is on x86_64 but I have touched other architectures where necessary to keep them from breaking. - To increase the number of irqs I modify the code to look at the (cpu, vector) pair instead of just looking at the vector. With a large number of irqs available systems with a large irq count no longer need to compress their irq numbers to fit. Removing a lot of brittle special cases. For acpi guys the result is that irq == gsi. - Addressing the fact that MSI assumes irq == vector takes a few more patches. But suffice it to say when I am done none of the generic irq code even knows what a vector is. In quick testing on a large Unisys x86_64 machine we stumbled over at least one driver that assumed that NR_IRQS could always fit into an 8 bit number. This driver is clearly buggy today. But this has become a class of bugs that it is now much easier to hit. This patch: This is a minor space optimization. In practice I don't think this has any affect because of our alignment constraints and the other fields but there is not point in chewing up an uncessary word and since we already read the flag field this should improve the cache hit ratio of the irq handler. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: convert the i386 architecture to irq-chipsIngo Molnar
This patch converts all the i386 PIC controllers (except VisWS and Voyager, which I could not test - but which should still work as old-style IRQ layers) to the new and simpler irq-chip interrupt handling layer. [akpm@osdl.org: build fix] [mingo@elte.hu: enable fasteoi handler for i386 level-triggered IO-APIC irqs] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: convert the x86_64 architecture to irq-chipsIngo Molnar
This patch converts all the x86_64 PIC controllers layers to the new and simpler irq-chip interrupt handling layer. [mingo@elte.hu: The patch also enables the fasteoi handler for x86_64] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] Fix linux/nfsd/const.h for make headers_checkCedric Le Goater
make headers_check fails on linux/nfsd/const.h. Since linux/sunrpc/msg_prot.h does not seem to export anything interesting for userspace, this patch moves it in the __KERNEL__ protected section. Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: nfsd4: actually use all the pieces to implement referralsJ.Bruce Fields
Use all the pieces set up so far to implement referral support, allowing return of NFS4ERR_MOVED and fs_locations attribute. Signed-off-by: Manoj Naik <manoj@almaden.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: nfsd4: xdr encoding for fs_locationsJ.Bruce Fields
Encode fs_locations attribute. Signed-off-by: Manoj Naik <manoj@almaden.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: nfsd4: fslocations data structuresManoj Naik
Define FS locations structures, some functions to manipulate them, and add code to parse FS locations in downcall and add to the exports structure. [bfields@fieldses.org: bunch of fixes and cleanups] Signed-off-by: Manoj Naik <manoj@almaden.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: nfsd: store export path in exportJ.Bruce Fields
Store the export path in the svc_export structure instead of storing only the dentry. This will prevent the need for additional d_path calls to provide NFSv4 fs_locations support. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] Convert lockd to use the newer mutex instead of the older semaphoreNeil Brown
Both the (recently introduces) nsm_sema and the older f_sema are converted over. Cc: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: register all RPC programs with portmapper by defaultOlaf Kirch
The NFSACL patches introduced support for multiple RPC services listening on the same transport. However, only the first of these services was registered with portmapper. This was perfectly fine for nfsacl, as you traditionally do not want these to show up in a portmapper listing. The patch below changes the default behavior to always register all services listening on a given transport, but retains the old behavior for nfsacl services. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: export nsm_local_state to user space via sysctlOlaf Kirch
Every NLM call includes the client's NSM state. Currently, the Linux client always reports 0 - which seems not to cause any problems, but is not what the protocol says. This patch exposes the kernel's internal variable to user space via a sysctl, which can be set at system boot time by statd. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: match GRANTED_RES replies using cookiesOlaf Kirch
When we send a GRANTED_MSG call, we current copy the NLM cookie provided in the original LOCK call - because in 1996, some broken clients seemed to rely on this bug. However, this means the cookies are not unique, so that when the client's GRANTED_RES message comes back, we cannot simply match it based on the cookie, but have to use the client's IP address in addition. Which breaks when you have a multi-homed NFS client. The X/Open spec explicitly mentions that clients should not expect the same cookie; so one may hope that any clients that were broken in 1996 have either been fixed or rendered obsolete. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: make nlmclnt_next_cookie SMP safeOlaf Kirch
The way we incremented the NLM cookie in nlmclnt_next_cookie was not thread safe. This patch changes the counter to an atomic_t Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: optionally use hostnames for identifying peersOlaf Kirch
This patch adds the nsm_use_hostnames sysctl and module param. If set, lockd will use the client's name (as given in the NLM arguments) to find the NSM handle. This makes recovery work when the NFS peer is multi-homed, and the reboot notification arrives from a different IP than the original lock calls. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: simplify nlmsvc_invalidate_allNeilBrown
As a result of previous patches, the loop in nlmsvc_invalidate_all just sets h_expires for all client/hosts to 0 (though does it in a very complicated way). This was possibly meant to trigger early garbage collection but half the time '0' is in the future and so it infact delays garbage collection. Pre-aging the 'hosts' is not really needed at this point anyway so we throw out the loop and nlm_find_client which is no longer needed. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: make nlm_traverse_* more flexibleOlaf Kirch
This patch makes nlm_traverse{locks,blocks,shares} and friends use a function pointer rather than a "action" enum. This function pointer is given two nlm_hosts (one given by the caller, the other taken from the lock/block/share currently visited), and is free to do with them as it wants. If it returns a non-zero value, the lockd/block/share is released. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: change nlm_file to use a hlistOlaf Kirch
This changes struct nlm_file and the nlm_files hash table to use a hlist instead of the home-grown lists. This allows us to remove f_hash which was only used to find the right hash chain to delete an entry from. It also increases the size of the nlm_files hash table from 32 to 128. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: Change list of blocked list to list_nodeOlaf Kirch
This patch changes the nlm_blocked list to use a list_node instead of homegrown linked list handling. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: make the hash chains use a hlist_nodeOlaf Kirch
Get rid of the home-grown singly linked lists for the nlm_host hash table. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: make the nsm upcalls use the nsm_handleOlaf Kirch
This converts the statd upcalls to use the nsm_handle This means that we only register each host once with statd, rather than registering each host/vers/protocol triple. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: Make nlm_host_rebooted use the nsm_handleOlaf Kirch
This patch makes the SM_NOTIFY handling understand and use the nsm_handle. To make it a bit clear what is happening: nlmclent_prepare_reclaim and nlmclnt_finish_reclaim get open-coded into 'reclaimer' The result is tidied up. Then some of that functionality is moved out into nlm_host_rebooted (which calls nlmclnt_recovery which starts a thread which runs reclaimer). Also host_rebooted now finds an nsm_handle rather than a host, then then iterates over all hosts and deals with each host that shares that nsm_handle. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: introduce nsm_handleOlaf Kirch
This patch introduces the nsm_handle, which is shared by all nlm_host objects referring to the same client. With this patch applied, all nlm_hosts from the same address will share the same nsm_handle. A future patch will add sharing by name. Note: this patch changes h_name so that it is no longer guaranteed to be an IP address of the host. When the host represents an NFS server, h_name will be the name passed in the mount call. When the host represents a client, h_name will be the name presented in the lock request received from the client. A h_name is only used for printing informational messages, this change should not be significant. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: when looking up a lockd host, pass hostname & lengthOlaf Kirch
This patch adds the peer's hostname (and name length) to all calls to nlm*_lookup_host functions. A subsequent patch will make use of these (is requested by a sysctl). Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: consolidate common code for statd->lockd notificationOlaf Kirch
Common code from nlm4svc_proc_sm_notify and nlmsvc_proc_sm_notify is moved into a new nlm_host_rebooted. This is in preparation of a patch that will change the reboot notification handling entirely. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: knfsd: cache ipmap per TCP socketGreg Banks
Speed up high call-rate workloads by caching the struct ip_map for the peer on the connected struct svc_sock instead of looking it up in the ip_map cache hashtable on every call. This helps workloads using AUTH_SYS authentication over TCP. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. Profiling showed strcmp(), called from ip_map_match(), was taking 4.8% of each CPU, and ip_map_lookup() was taking 2.9%. This patch drops both contribution into the profile noise. Note that the above result overstates this value of this patch for most workloads. The synthetic clients are all using separate IP addresses, so there are 64 entries in the ip_map cache hash. Because the kernel measured contained the bug fixed in commit commit 1f1e030bf75774b6a283518e1534d598e14147d4 and was running on 64bit little-endian machine, probably all of those 64 entries were on a single chain, thus increasing the cost of ip_map_lookup(). With a modern kernel you would need more clients to see the same amount of performance improvement. This patch has helped to scale knfsd to handle a deployment with 2000 NFS clients. Signed-off-by: Greg Banks <gnb@melbourne.sgi.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: Allow max size of NFSd payload to be configuredNeilBrown
The max possible is the maximum RPC payload. The default depends on amount of total memory. The value can be set within reason as long as no nfsd threads are currently running. The value can also be ready, allowing the default to be determined after nfsd has started. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: Prepare knfsd for support of rsize/wsize of up to 1MB, over TCPGreg Banks
The limit over UDP remains at 32K. Also, make some of the apparently arbitrary sizing constants clearer. The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of the rqstp. This allows it to be different for different protocols (udp/tcp) and also allows it to depend on the servers declared sv_bufsiz. Note that we don't actually increase sv_bufsz for nfs yet. That comes next. Signed-off-by: Greg Banks <gnb@melbourne.sgi.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: Avoid excess stack usage in svc_tcp_recvfromNeilBrown
.. by allocating the array of 'kvec' in 'struct svc_rqst'. As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer allocate an array of this size on the stack. So we allocate it in 'struct svc_rqst'. However svc_rqst contains (indirectly) an array of the same type and size (actually several, but they are in a union). So rather than waste space, we move those arrays out of the separately allocated union and into svc_rqst to share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at different times, so there is no conflict). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: Replace two page lists in struct svc_rqst with oneNeilBrown
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256. This means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES. struct svc_rqst contains two such arrays. However the there are never more that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is needed. The two arrays are for the pages holding the request, and the pages holding the reply. Instead of two arrays, we can simply keep an index into where the first reply page is. This patch also removes a number of small inline functions that probably server to obscure what is going on rather than clarify it, and opencode the needed functionality. Also remove the 'rq_restailpage' variable as it is *always* 0. i.e. if the response 'xdr' structure has a non-empty tail it is always in the same pages as the head. check counters are initilised and incr properly check for consistant usage of ++ etc maybe extra some inlines for common approach general review Signed-off-by: Neil Brown <neilb@suse.de> Cc: Magnus Maatta <novell@kiruna.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: driver for TI FlashMedia card reader - sourceAlex Dubov
Driver for TI Flash Media card reader. At present, only MMC/SD cards are supported. [akpm@osdl.org: cleanups, build fixes] Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] scx200_hrt: fix precedence bug manifesting as 27x clock in 1 MHz modeJim Cromie
Fix paren-placement / precedence bug breaking initialization for 1 MHz clock mode. Also fix comment spelling error, and fence-post (off-by-one) error on symbol used in request_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=7242 Thanks alexander.krause@erazor-zone.de, dzpost@dedekind.net, for the reports and patch test, and phelps@mantara.com for the independent patch and verification. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: <alexander.krause@erazor-zone.de> Cc: <dzpost@dedekind.net> Cc: <phelps@mantara.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] slab: clean up leak tracking ifdefs a little bitChristoph Hellwig
- rename ____kmalloc to kmalloc_track_caller so that people have a chance to guess what it does just from it's name. Add a comment describing it for those who don't. Also move it after kmalloc in slab.h so people get less confused when they are just looking for kmalloc - move things around in slab.c a little to reduce the ifdef mess. [penberg@cs.helsinki.fi: Fix up reversed #ifdef] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] ipc: headers_check fixCedric Le Goater
Fix headers_check #ifdef __KERNEL__ stuff. Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> All-the-fault-of: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] i383 numa: fix numaq/summit apicid conflictKeith Mannthey
This allows numaq to properly align cpus to their given node during boot. Pass logical apicid to apicid_to_node and allow the summit sub-arch to use physical apicid (hard_smp_processor_id()). Tested against numaq and summit based systems with no issues. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits) Add missing maintainer countries in CREDITS Fix bytes <-> kilobytes typo in Kconfig for ramdisk fix a typo in Documentation/pi-futex.txt BUG_ON conversion for fs/xfs/ BUG_ON() conversion in fs/nfsd/ BUG_ON conversion for fs/reiserfs BUG_ON cleanups in arch/i386 BUG_ON cleanup in drivers/net/tokenring/ BUG_ON cleanup for drivers/md/ kerneldoc-typo in led-class.c debugfs: spelling fix rcutorture: Fix incorrect description of default for nreaders parameter parport: Remove space in function calls Michal Wronski: update contact info Spelling fix: "control" instead of "cotrol" reboot parameter in Documentation/kernel-parameters.txt Fix copy&waste bug in comment in scripts/kernel-doc remove duplicate "until" from kernel/workqueue.c ite_gpio fix tabbage fix file specification in comments ... Fixed trivial path conflicts due to removed files: arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME. [MIPS] DECstation defconfig update [MIPS] Fix size of zones_size and zholes_size array [MIPS] BCM1480: Mask pending interrupts against c0_status.im. [MIPS] SB1250: Interrupt handler fixes [MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support. [MIPS] Remove Atlas and SEAD from feature-removal-schedule. [MIPS] Remove Jaguar and Ocelot family from feature list. [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems [MIPS] Remove dead DECstation boot code [MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary
2006-10-03V4L/DVB (4673): Mark the two newer ioctls as experimentalMauro Carvalho Chehab
VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls are meant to be used to provide better support for webcams. Currently, it is not yet used on kernel drivers. Better to keep it marked as experimental, until we have several kernel drivers supporting those features. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4672): Frame format enumeration (1/2)Laurent Pinchart
Add VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls to enumerate supported frame sizes and frame intervals. Signed-off-by: Martin Rubli <martin.rubli@epfl.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4666): Ensure the WM8775 driver is loaded generically for any board.Steven Toth
A generic change to cards to allow any board to specify whether it needs the wm8775 module loaded (by the core) or not. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.Yoichi Yuasa
As per feature-removal-schedule.txt. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systemsMaciej W. Rozycki
It was obesrved that at least one older PCI card predating the requirement for the TRDY signal to respond within 16 clock ticks actually does not meet this rule nor even the power-on defaults of the PCI bridges found in development systems built around the Broadcom SiByte SOCs. Here is a patch that bumps up the timeout to the highest finite value supported by these chips, which is 255 clock ticks. The bridges affected are the SiByte SOC itself and the SP1011. This change does not effectively affect systems only having PCI option cards installed that meet the TRDY requirement of the current PCI spec. The rule was introduced with PCI 2.1, so any older card may make the system affected. If this is the case, performance of the system will suffer in return for the card working at all. If this is a concern, then the solution is not to use such cards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-10-03[MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundaryFranck Bui-Huu
The stack pointer in MIPS/gcc should always 8 bytes aligned on entry to any routines. Therefore pt_regs structure must be aligned to 8-byte boundary too. Instead of creating dummy fields to achieve this alignment, this patch let gcc doing it. Therefore 'smtc_pad' field can be safely removed. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support [ARM] 3880/1: remove the last trace of iop31x support [ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernet [ARM] 3809/3: get rid of 4 megabyte kernel image size limit [ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.c [ARM] 3874/1: Remove leftover usage of asm/timeofday.h
2006-10-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits) [SERIAL] add PNP IDs for FPI based touchscreens [SERIAL] Magic SysRq SAK does nothing on serial consoles [SERIAL] tickle NMI watchdog on serial output. [SERIAL] Fix oops when removing suspended serial port [SERIAL] Fix resume handling bug [SERIAL] Remove wrong asm/serial.h inclusions [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c [SERIAL] OMAP1510 serial fix for 115200 baud [SERIAL] returning proper error from serial core driver [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port [SERIAL] suspend/resume handlers don't have level arg anymore [SERIAL] 8250 resourse management fixes [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk [SERIAL] serial_cs: add configuration quirk [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk [SERIAL] serial_cs: convert IBM post-init handling to a quirk [SERIAL] serial_cs: allow wildcarded quirks [SERIAL] serial_cs: convert multi-port table to quirk table [SERIAL] serial_cs: Use clean up multiport card detection ...
2006-10-03Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup __raw_read_trylock(). sh: Kill off remaining config.h references. sh: Initial gitignore list sh: build fixes for defconfigs. sh: Kill off more dead headers. sh: Set pclk default for SH7705. sh: defconfig updates.
2006-10-03Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more. [SPARC64]: Move signal compat bits to new header file.
2006-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits) [POWERPC] Fix rheap alignment problem [POWERPC] Use check_legacy_ioport() for ISAPnP [POWERPC] Avoid NULL pointer in gpio1_interrupt [POWERPC] Enable generic rtc hook for the MPC8349 mITX [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot [POWERPC] fix spin lock nesting in hvc_iseries [POWERPC] EEH failure to mark pci slot as frozen. [POWERPC] update powerpc defconfig files after libata kconfig breakage [POWERPC] enable sysrq in pmac32_defconfig [POWERPC] UPIO_TSI cleanup [POWERPC] rewrite mkprep and mkbugboot in sane C [POWERPC] maple/pci iomem annotations [POWERPC] powerpc oprofile __user annotations [POWERPC] cell spufs iomem annotations [POWERPC] NULL noise removal: spufs [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c [POWERPC] update mpc8349_itx_defconfig and remove some debug settings [POWERPC] Always call cede in pseries dedicated idle loop [POWERPC] Fix loop logic in irq_alloc_virt() ...
2006-10-03[PATCH] pr_debug: check pr_debug() argumentsZach Brown
check pr_debug() arguments When DEBUG isn't defined pr_debug() is defined away as an empty macro. By throwing away the arguments we allow completely incorrect code to build. Instead let's make it an empty inline which checks arguments and mark it so gcc can check the format specification. This results in a seemingly insignificant code size increase. A x86-64 allyesconfig: text data bss dec hex filename 25354768 7191098 4854720 37400586 23ab00a vmlinux.before 25354945 7191138 4854720 37400803 23ab0e3 vmlinux Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>