summaryrefslogtreecommitdiff
path: root/kernel/sched/fair.c
AgeCommit message (Collapse)Author
2013-05-02Merge commit '8700c95adb03' into timers/nohzFrederic Weisbecker
The full dynticks tree needs the latest RCU and sched upstream updates in order to fix some dependencies. Merge a common upstream merge point that has these updates. Conflicts: include/linux/perf_event.h kernel/rcutree.h kernel/rcutree_plugin.h Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-04-26sched: Fix init NOHZ_IDLE flagVincent Guittot
On my SMP platform which is made of 5 cores in 2 clusters, I have the nr_busy_cpu field of sched_group_power struct that is not null when the platform is fully idle - which makes the scheduler unhappy. The root cause is: During the boot sequence, some CPUs reach the idle loop and set their NOHZ_IDLE flag while waiting for others CPUs to boot. But the nr_busy_cpus field is initialized later with the assumption that all CPUs are in the busy state whereas some CPUs have already set their NOHZ_IDLE flag. More generally, the NOHZ_IDLE flag must be initialized when new sched_domains are created in order to ensure that NOHZ_IDLE and nr_busy_cpus are aligned. This condition can be ensured by adding a synchronize_rcu() between the destruction of old sched_domains and the creation of new ones so the NOHZ_IDLE flag will not be updated with old sched_domain once it has been initialized. But this solution introduces a additionnal latency in the rebuild sequence that is called during cpu hotplug. As suggested by Frederic Weisbecker, another solution is to have the same rcu lifecycle for both NOHZ_IDLE and sched_domain struct. A new nohz_idle field is added to sched_domain so both status and sched_domain will share the same RCU lifecycle and will be always synchronized. In addition, there is no more need to protect nohz_idle against concurrent access as it is only modified by 2 exclusive functions called by local cpu. This solution has been prefered to the creation of a new struct with an extra pointer indirection for sched_domain. The synchronization is done at the cost of : - An additional indirection and a rcu_dereference for accessing nohz_idle. - We use only the nohz_idle field of the top sched_domain. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linaro-kernel@lists.linaro.org Cc: peterz@infradead.org Cc: fweisbec@gmail.com Cc: pjt@google.com Cc: rostedt@goodmis.org Cc: efault@gmx.de Link: http://lkml.kernel.org/r/1366729142-14662-1-git-send-email-vincent.guittot@linaro.org [ Fixed !NO_HZ build bug. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Prevent to re-select dst-cpu in load_balance()Joonsoo Kim
Commit 88b8dac0 makes load_balance() consider other cpus in its group. But, in that, there is no code for preventing to re-select dst-cpu. So, same dst-cpu can be selected over and over. This patch add functionality to load_balance() in order to exclude cpu which is selected once. We prevent to re-select dst_cpu via env's cpus, so now, env's cpus is a candidate not only for src_cpus, but also dst_cpus. With this patch, we can remove lb_iterations and max_lb_iterations, because we decide whether we can go ahead or not via env's cpus. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-7-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Rename load_balance_tmpmask to load_balance_maskJoonsoo Kim
This name doesn't represent specific meaning. So rename it to imply it's purpose. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Move up affinity check to mitigate useless redoing overheadJoonsoo Kim
Currently, LBF_ALL_PINNED is cleared after affinity check is passed. So, if task migration is skipped by small load value or small imbalance value in move_tasks(), we don't clear LBF_ALL_PINNED. At last, we trigger 'redo' in load_balance(). Imbalance value is often so small that any tasks cannot be moved to other cpus and, of course, this situation may be continued after we change the target cpu. So this patch move up affinity check code and clear LBF_ALL_PINNED before evaluating load value in order to mitigate useless redoing overhead. In addition, re-order some comments correctly. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-5-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Don't consider other cpus in our group in case of NEWLY_IDLEJoonsoo Kim
Commit 88b8dac0 makes load_balance() consider other cpus in its group, regardless of idle type. When we do NEWLY_IDLE balancing, we should not consider it, because a motivation of NEWLY_IDLE balancing is to turn this cpu to non idle state if needed. This is not the case of other cpus. So, change code not to consider other cpus for NEWLY_IDLE balancing. With this patch, assign 'if (pulled_task) this_rq->idle_stamp = 0' in idle_balance() is corrected, because NEWLY_IDLE balancing doesn't consider other cpus. Assigning to 'this_rq->idle_stamp' is now valid. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-4-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Explicitly cpu_idle_type checking in rebalance_domains()Joonsoo Kim
After commit 88b8dac0, dst-cpu can be changed in load_balance(), then we can't know cpu_idle_type of dst-cpu when load_balance() return positive. So, add explicit cpu_idle_type checking. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Change position of resched_cpu() in load_balance()Joonsoo Kim
cur_ld_moved is reset if env.flags hit LBF_NEED_BREAK. So, there is possibility that we miss doing resched_cpu(). Correct it as changing position of resched_cpu() before checking LBF_NEED_BREAK. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-2-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-21sched: Fix wrong rq's runnable_avg update with rt tasksVincent Guittot
The current update of the rq's load can be erroneous when RT tasks are involved. The update of the load of a rq that becomes idle, is done only if the avg_idle is less than sysctl_sched_migration_cost. If RT tasks and short idle duration alternate, the runnable_avg will not be updated correctly and the time will be accounted as idle time when a CFS task wakes up. A new idle_enter function is called when the next task is the idle function so the elapsed time will be accounted as run time in the load of the rq, whatever the average idle time is. The function update_rq_runnable_avg is removed from idle_balance. When a RT task is scheduled on an idle CPU, the update of the rq's load is not done when the rq exit idle state because CFS's functions are not called. Then, the idle_balance, which is called just before entering the idle function, updates the rq's load and makes the assumption that the elapsed time since the last update, was only running time. As a consequence, the rq's load of a CPU that only runs a periodic RT task, is close to LOAD_AVG_MAX whatever the running duration of the RT task is. A new idle_exit function is called when the prev task is the idle function so the elapsed time will be accounted as idle time in the rq's load. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: linaro-kernel@lists.linaro.org Cc: peterz@infradead.org Cc: pjt@google.com Cc: fweisbec@gmail.com Cc: efault@gmx.de Link: http://lkml.kernel.org/r/1366302867-5055-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-10sched: Fix comment in rebalance_domains()Libin
A comment in function rebalance_domains() mentions arch_init_sched_domains(), but that function does not exist anymore. The proper function is init_sched_domains(). Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <peterz@infradead.org> Link: http://lkml.kernel.org/r/1364814841-49156-1-git-send-email-huawei.libin@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-10sched: Simplify can_migrate_task()Zhang Hang
At this point tsk_cache_hot is always true, so no need to check it. Signed-off-by: Zhang Hang <bob.zhanghang@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/51650107.9040606@huawei.com [ Also remove unnecessary schedstat #ifdefs. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMONFrederic Weisbecker
We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-14sched: Fix variable name misnomer, add commentsAndrei Epure
The min_vruntime variable actually stores the maximum value. The added comment was taken from place_entity function. Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1363115544-1964-1-git-send-email-epure.andrei@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-11sched: Spelling fixAndrei Epure
Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Cc: trivial@kernel.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1362996200-2674-1-git-send-email-epure.andrei@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06sched: Make default_scale_freq_power() staticLi Zefan
As default_scale_{freq,smt}_power() and update_rt_power() are used in kernel/sched/fair.c only, annotate them as static functions. Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5135A7AF.8010900@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-20Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-04sched: Fix select_idle_sibling() bouncing cow syndromeMike Galbraith
If the previous CPU is cache affine and idle, select it. The current implementation simply traverses the sd_llc domain, taking the first idle CPU encountered, which walks buddy pairs hand in hand over the package, inflicting excruciating pain. 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs Signed-off-by: Mike Galbraith <bitbucket@online.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1359371965.5783.127.camel@marge.simpson.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-25sched: Fix warning in kernel/sched/fair.cArnd Bergmann
a4c96ae319 "sched: Unthrottle rt runqueues in __disable_runtime()" turned the unthrottle_offline_cfs_rqs function into a static symbol, which now triggers a warning about it being potentially unused: kernel/sched/fair.c:2055:13: warning: 'unthrottle_offline_cfs_rqs' defined but not used [-Wunused-function] Marking it __maybe_unused shuts up the gcc warning and lets the compiler safely drop the function body when it's not being used. To reproduce, build the ARM bcm2835_defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Boonstoppel <pboonstoppel@nvidia.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: linux-arm-kernel@list.infradead.org Link: http://lkml.kernel.org/r/1359123276-15833-6-git-send-email-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-24sched/fair: Set se->vruntime directly in place_entity()Viresh Kumar
We are first storing the new vruntime in a variable and then storing it in se->vruntime. Simply update se->vruntime directly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-dev@lists.linaro.org Cc: patches@linaro.org Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/ae59db1945518d6f6250920d46eb1f1a9cc0024e.1352361704.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-24sched: Fix the broken sched_rr_get_interval()Zhu Yanhai
The caller of sched_sliced() should pass se.cfs_rq and se as the arguments, however in sched_rr_get_interval() we gave it rq.cfs_rq and se, which made the following computation obviously wrong. The change was introduced by commit: 77034937dc45 sched: fix crash in sys_sched_rr_get_interval() ... 5 years ago, while it had been the correct 'cfs_rq_of' before the commit. The change seems to be irrelevant to the commit msg, which was to return a 0 timeslice for tasks that are on an idle runqueue. So I believe that was just a plain typo. Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1357621012-15039-1-git-send-email-gaoyang.zyh@taobao.com [ Since this is an ABI and an old bug, we'll test this via a slow upstream route, to hopefully discover any app breakage. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-20sched: numa: ksm: fix oops in task_numa_placment()Hugh Dickins
task_numa_placement() oopsed on NULL p->mm when task_numa_fault() got called in the handling of break_ksm() for ksmd. That might be a peculiar case, which perhaps KSM could takes steps to avoid? but it's more robust if task_numa_placement() allows for such a possibility. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17sched: numa: Fix build error if CONFIG_NUMA_BALANCING && ↵Mel Gorman
!CONFIG_TRANSPARENT_HUGEPAGE Michal Hocko reported that the following build error occurs if CONFIG_NUMA_BALANCING is set without THP support kernel/sched/fair.c: In function ‘task_numa_work’: kernel/sched/fair.c:932:55: error: call to ‘__build_bug_failed’ declared with attribute error: BUILD_BUG failed The problem is that HPAGE_PMD_SHIFT triggers a BUILD_BUG() on !CONFIG_TRANSPARENT_HUGEPAGE. This patch addresses the problem. Reported-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-16Merge tag 'balancenuma-v11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma Pull Automatic NUMA Balancing bare-bones from Mel Gorman: "There are three implementations for NUMA balancing, this tree (balancenuma), numacore which has been developed in tip/master and autonuma which is in aa.git. In almost all respects balancenuma is the dumbest of the three because its main impact is on the VM side with no attempt to be smart about scheduling. In the interest of getting the ball rolling, it would be desirable to see this much merged for 3.8 with the view to building scheduler smarts on top and adapting the VM where required for 3.9. The most recent set of comparisons available from different people are mel: https://lkml.org/lkml/2012/12/9/108 mingo: https://lkml.org/lkml/2012/12/7/331 tglx: https://lkml.org/lkml/2012/12/10/437 srikar: https://lkml.org/lkml/2012/12/10/397 The results are a mixed bag. In my own tests, balancenuma does reasonably well. It's dumb as rocks and does not regress against mainline. On the other hand, Ingo's tests shows that balancenuma is incapable of converging for this workloads driven by perf which is bad but is potentially explained by the lack of scheduler smarts. Thomas' results show balancenuma improves on mainline but falls far short of numacore or autonuma. Srikar's results indicate we all suffer on a large machine with imbalanced node sizes. My own testing showed that recent numacore results have improved dramatically, particularly in the last week but not universally. We've butted heads heavily on system CPU usage and high levels of migration even when it shows that overall performance is better. There are also cases where it regresses. Of interest is that for specjbb in some configurations it will regress for lower numbers of warehouses and show gains for higher numbers which is not reported by the tool by default and sometimes missed in treports. Recently I reported for numacore that the JVM was crashing with NullPointerExceptions but currently it's unclear what the source of this problem is. Initially I thought it was in how numacore batch handles PTEs but I'm no longer think this is the case. It's possible numacore is just able to trigger it due to higher rates of migration. These reports were quite late in the cycle so I/we would like to start with this tree as it contains much of the code we can agree on and has not changed significantly over the last 2-3 weeks." * tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma: (50 commits) mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable mm/rmap: Convert the struct anon_vma::mutex to an rwsem mm: migrate: Account a transhuge page properly when rate limiting mm: numa: Account for failed allocations and isolations as migration failures mm: numa: Add THP migration for the NUMA working set scanning fault case build fix mm: numa: Add THP migration for the NUMA working set scanning fault case. mm: sched: numa: Delay PTE scanning until a task is scheduled on a new node mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG mm: sched: numa: Control enabling and disabling of NUMA balancing mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate mm: numa: Use a two-stage filter to restrict pages being migrated for unlikely task<->node relationships mm: numa: migrate: Set last_nid on newly allocated page mm: numa: split_huge_page: Transfer last_nid on tail page mm: numa: Introduce last_nid to the page frame sched: numa: Slowly increase the scanning period as NUMA faults are handled mm: numa: Rate limit setting of pte_numa if node is saturated mm: numa: Rate limit the amount of memory that is migrated between nodes mm: numa: Structures for Migrate On Fault per NUMA migration rate limiting mm: numa: Migrate pages handled during a pmd_numa hinting fault mm: numa: Migrate on reference policy ...
2012-12-14Revert "sched: Update_cfs_shares at period edge"Linus Torvalds
This reverts commit f269ae0469fc882332bdfb5db15d3c1315fe2a10. It turns out it causes a very noticeable interactivity regression with CONFIG_SCHED_AUTOGROUP (test-case: "make -j32" of the kernel in a terminal window, while scrolling in a browser - the autogrouping means that the two end up in separate cgroups, and the browser should be smooth as silk despite the high load). Says Paul Turner: "It seems that the update-throttling on the wake-side is reducing the interactive tasks' ability to preempt. While I suspect the right longer term answer here is force these updates only in the cross-cgroup case; this is less trivial. For this release I believe the right answer is either going to be a revert or restore the updates on the enqueue-side." Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Bisected-by: Mike Galbraith <efault@gmx.de> Acked-by: Paul Turner <pjt@google.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11mm: sched: numa: Delay PTE scanning until a task is scheduled on a new nodeMel Gorman
Due to the fact that migrations are driven by the CPU a task is running on there is no point tracking NUMA faults until one task runs on a new node. This patch tracks the first node used by an address space. Until it changes, PTE scanning is disabled and no NUMA hinting faults are trapped. This should help workloads that are short-lived, do not care about NUMA placement or have bound themselves to a single node. This takes advantage of the logic in "mm: sched: numa: Implement slow start for working set sampling" to delay when the checks are made. This will take advantage of processes that set their CPU and node bindings early in their lifetime. It will also potentially allow any initial load balancing to take place. Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11mm: sched: numa: Control enabling and disabling of NUMA balancingMel Gorman
This patch adds Kconfig options and kernel parameters to allow the enabling and disabling of automatic NUMA balancing. The existance of such a switch was and is very important when debugging problems related to transparent hugepages and we should have the same for automatic NUMA placement. Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrateMel Gorman
The PTE scanning rate and fault rates are two of the biggest sources of system CPU overhead with automatic NUMA placement. Ideally a proper policy would detect if a workload was properly placed, schedule and adjust the PTE scanning rate accordingly. We do not track the necessary information to do that but we at least know if we migrated or not. This patch scans slower if a page was not migrated as the result of a NUMA hinting fault up to sysctl_numa_balancing_scan_period_max which is now higher than the previous default. Once every minute it will reset the scanner in case of phase changes. This is hilariously crude and the numbers are arbitrary. Workloads will converge quite slowly in comparison to what a proper policy should be able to do. On the plus side, we will chew up less CPU for workloads that have no need for automatic balancing. Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11sched: numa: Slowly increase the scanning period as NUMA faults are handledMel Gorman
Currently the rate of scanning for an address space is controlled by the individual tasks. The next scan is simply determined by 2*p->numa_scan_period. The 2*p->numa_scan_period is arbitrary and never changes. At this point there is still no proper policy that decides if a task or process is properly placed. It just scans and assumes the next NUMA fault will place it properly. As it is assumed that pages will get properly placed over time, increase the scan window each time a fault is incurred. This is a big assumption as noted in the comments. It should be noted that changing to p->numa_scan_period will increase system CPU usage because now the scanning rate has effectively doubled. If that is a problem then the min_rate should be made 200ms instead of restoring the 2* logic. Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11mm: numa: Rate limit setting of pte_numa if node is saturatedMel Gorman
If there are a large number of NUMA hinting faults and all of them are resulting in migrations it may indicate that memory is just bouncing uselessly around. NUMA balancing cost is likely exceeding any benefit from locality. Rate limit the PTE updates if the node is migration rate-limited. As noted in the comments, this distorts the NUMA faulting statistics. Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11mm: sched: numa: Implement slow start for working set samplingPeter Zijlstra
Add a 1 second delay before starting to scan the working set of a task and starting to balance it amongst nodes. [ note that before the constant per task WSS sampling rate patch the initial scan would happen much later still, in effect that patch caused this regression. ] The theory is that short-run tasks benefit very little from NUMA placement: they come and go, and they better stick to the node they were started on. As tasks mature and rebalance to other CPUs and nodes, so does their NUMA placement have to change and so does it start to matter more and more. In practice this change fixes an observable kbuild regression: # [ a perf stat --null --repeat 10 test of ten bzImage builds to /dev/shm ] !NUMA: 45.291088843 seconds time elapsed ( +- 0.40% ) 45.154231752 seconds time elapsed ( +- 0.36% ) +NUMA, no slow start: 46.172308123 seconds time elapsed ( +- 0.30% ) 46.343168745 seconds time elapsed ( +- 0.25% ) +NUMA, 1 sec slow start: 45.224189155 seconds time elapsed ( +- 0.25% ) 45.160866532 seconds time elapsed ( +- 0.17% ) and it also fixes an observable perf bench (hackbench) regression: # perf stat --null --repeat 10 perf bench sched messaging -NUMA: -NUMA: 0.246225691 seconds time elapsed ( +- 1.31% ) +NUMA no slow start: 0.252620063 seconds time elapsed ( +- 1.13% ) +NUMA 1sec delay: 0.248076230 seconds time elapsed ( +- 1.35% ) The implementation is simple and straightforward, most of the patch deals with adding the /proc/sys/kernel/numa_balancing_scan_delay_ms tunable knob. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> [ Wrote the changelog, ran measurements, tuned the default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com>
2012-12-11sched, numa, mm: Count WS scanning against present PTEs, not virtual memory ↵Mel Gorman
ranges By accounting against the present PTEs, scanning speed reflects the actual present (mapped) memory. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-11mm: sched: numa: Implement constant, per task Working Set Sampling (WSS) ratePeter Zijlstra
Previously, to probe the working set of a task, we'd use a very simple and crude method: mark all of its address space PROT_NONE. That method has various (obvious) disadvantages: - it samples the working set at dissimilar rates, giving some tasks a sampling quality advantage over others. - creates performance problems for tasks with very large working sets - over-samples processes with large address spaces but which only very rarely execute Improve that method by keeping a rotating offset into the address space that marks the current position of the scan, and advance it by a constant rate (in a CPU cycles execution proportional manner). If the offset reaches the last mapped address of the mm then it then it starts over at the first address. The per-task nature of the working set sampling functionality in this tree allows such constant rate, per task, execution-weight proportional sampling of the working set, with an adaptive sampling interval/frequency that goes from once per 100ms up to just once per 8 seconds. The current sampling volume is 256 MB per interval. As tasks mature and converge their working set, so does the sampling rate slow down to just a trickle, 256 MB per 8 seconds of CPU time executed. This, beyond being adaptive, also rate-limits rarely executing systems and does not over-sample on overloaded systems. [ In AutoNUMA speak, this patch deals with the effective sampling rate of the 'hinting page fault'. AutoNUMA's scanning is currently rate-limited, but it is also fundamentally single-threaded, executing in the knuma_scand kernel thread, so the limit in AutoNUMA is global and does not scale up with the number of CPUs, nor does it scan tasks in an execution proportional manner. So the idea of rate-limiting the scanning was first implemented in the AutoNUMA tree via a global rate limit. This patch goes beyond that by implementing an execution rate proportional working set sampling rate that is not implemented via a single global scanning daemon. ] [ Dan Carpenter pointed out a possible NULL pointer dereference in the first version of this patch. ] Based-on-idea-by: Andrea Arcangeli <aarcange@redhat.com> Bug-Found-By: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> [ Wrote changelog and fixed bug. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com>
2012-12-11mm: numa: Add fault driven placement and migrationPeter Zijlstra
NOTE: This patch is based on "sched, numa, mm: Add fault driven placement and migration policy" but as it throws away all the policy to just leave a basic foundation I had to drop the signed-offs-by. This patch creates a bare-bones method for setting PTEs pte_numa in the context of the scheduler that when faulted later will be faulted onto the node the CPU is running on. In itself this does nothing useful but any placement policy will fundamentally depend on receiving hints on placement from fault context and doing something intelligent about it. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com>
2012-11-18Merge branch 'sched/urgent' into sched/coreIngo Molnar
Merge in fixes before we queue up dependent bits, to avoid conflicts. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Describe CFS load-balancerPeter Zijlstra
Add some scribbles on how and why the load-balancer works.. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1341316406.23484.64.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-trackingPaul Turner
While per-entity load-tracking is generally useful, beyond computing shares distribution, e.g. runnable based load-balance (in progress), governors, power-management, etc. These facilities are not yet consumers of this data. This may be trivially reverted when the information is required; but avoid paying the overhead for calculations we will not use until then. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141507.422162369@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Make __update_entity_runnable_avg() fastPaul Turner
__update_entity_runnable_avg forms the core of maintaining an entity's runnable load average. In this function we charge the accumulated run-time since last update and handle appropriate decay. In some cases, e.g. a waking task, this time interval may be much larger than our period unit. Fortunately we can exploit some properties of our series to perform decay for a blocked update in constant time and account the contribution for a running update in essentially-constant* time. [*]: For any running entity they should be performing updates at the tick which gives us a soft limit of 1 jiffy between updates, and we can compute up to a 32 jiffy update in a single pass. C program to generate the magic constants in the arrays: #include <math.h> #include <stdio.h> #define N 32 #define WMULT_SHIFT 32 const long WMULT_CONST = ((1UL << N) - 1); double y; long runnable_avg_yN_inv[N]; void calc_mult_inv() { int i; double yn = 0; printf("inverses\n"); for (i = 0; i < N; i++) { yn = (double)WMULT_CONST * pow(y, i); runnable_avg_yN_inv[i] = yn; printf("%2d: 0x%8lx\n", i, runnable_avg_yN_inv[i]); } printf("\n"); } long mult_inv(long c, int n) { return (c * runnable_avg_yN_inv[n]) >> WMULT_SHIFT; } void calc_yn_sum(int n) { int i; double sum = 0, sum_fl = 0, diff = 0; /* * We take the floored sum to ensure the sum of partial sums is never * larger than the actual sum. */ printf("sum y^n\n"); printf(" %8s %8s %8s\n", "exact", "floor", "error"); for (i = 1; i <= n; i++) { sum = (y * sum + y * 1024); sum_fl = floor(y * sum_fl+ y * 1024); printf("%2d: %8.0f %8.0f %8.0f\n", i, sum, sum_fl, sum_fl - sum); } printf("\n"); } void calc_conv(long n) { long old_n; int i = -1; printf("convergence (LOAD_AVG_MAX, LOAD_AVG_MAX_N)\n"); do { old_n = n; n = mult_inv(n, 1) + 1024; i++; } while (n != old_n); printf("%d> %ld\n", i - 1, n); printf("\n"); } void main() { y = pow(0.5, 1/(double)N); calc_mult_inv(); calc_conv(1024); calc_yn_sum(N); } [ Compile with -lm ] Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141507.277808946@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Update_cfs_shares at period edgePaul Turner
Now that our measurement intervals are small (~1ms) we can amortize the posting of update_shares() to be about each period overflow. This is a large cost saving for frequently switching tasks. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141507.200772172@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Refactor update_shares_cpu() -> update_blocked_avgs()Paul Turner
Now that running entities maintain their own load-averages the work we must do in update_shares() is largely restricted to the periodic decay of blocked entities. This allows us to be a little less pessimistic regarding our occupancy on rq->lock and the associated rq->clock updates required. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141507.133999170@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Replace update_shares weight distribution with per-entity computationPaul Turner
Now that the machinery in place is in place to compute contributed load in a bottom up fashion; replace the shares distribution code within update_shares() accordingly. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141507.061208672@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Maintain runnable averages across throttled periodsPaul Turner
With bandwidth control tracked entities may cease execution according to user specified bandwidth limits. Charging this time as either throttled or blocked however, is incorrect and would falsely skew in either direction. What we actually want is for any throttled periods to be "invisible" to load-tracking as they are removed from the system for that interval and contribute normally otherwise. Do this by moderating the progression of time to omit any periods in which the entity belonged to a throttled hierarchy. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.998912151@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Normalize tg load contributions against runnable timePaul Turner
Entities of equal weight should receive equitable distribution of cpu time. This is challenging in the case of a task_group's shares as execution may be occurring on multiple cpus simultaneously. To handle this we divide up the shares into weights proportionate with the load on each cfs_rq. This does not however, account for the fact that the sum of the parts may be less than one cpu and so we need to normalize: load(tg) = min(runnable_avg(tg), 1) * tg->shares Where runnable_avg is the aggregate time in which the task_group had runnable children. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com>. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.930124292@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Compute load contribution by a group entityPaul Turner
Unlike task entities who have a fixed weight, group entities instead own a fraction of their parenting task_group's shares as their contributed weight. Compute this fraction so that we can correctly account hierarchies and shared entity nodes. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.855074415@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Aggregate total task_group loadPaul Turner
Maintain a global running sum of the average load seen on each cfs_rq belonging to each task group so that it may be used in calculating an appropriate shares:weight distribution. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.792901086@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Account for blocked load waking back upPaul Turner
When a running entity blocks we migrate its tracked load to cfs_rq->blocked_runnable_avg. In the sleep case this occurs while holding rq->lock and so is a natural transition. Wake-ups however, are potentially asynchronous in the presence of migration and so special care must be taken. We use an atomic counter to track such migrated load, taking care to match this with the previously introduced decay counters so that we don't migrate too much load. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.726077467@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Add an rq migration call-back to sched_classPaul Turner
Since we are now doing bottom up load accumulation we need explicit notification when a task has been re-parented so that the old hierarchy can be updated. Adds: migrate_task_rq(struct task_struct *p, int next_cpu) (The alternative is to do this out of __set_task_cpu, but it was suggested that this would be a cleaner encapsulation.) Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.660023400@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Maintain the load contribution of blocked entitiesPaul Turner
We are currently maintaining: runnable_load(cfs_rq) = \Sum task_load(t) For all running children t of cfs_rq. While this can be naturally updated for tasks in a runnable state (as they are scheduled); this does not account for the load contributed by blocked task entities. This can be solved by introducing a separate accounting for blocked load: blocked_load(cfs_rq) = \Sum runnable(b) * weight(b) Obviously we do not want to iterate over all blocked entities to account for their decay, we instead observe that: runnable_load(t) = \Sum p_i*y^i and that to account for an additional idle period we only need to compute: y*runnable_load(t). This means that we can compute all blocked entities at once by evaluating: blocked_load(cfs_rq)` = y * blocked_load(cfs_rq) Finally we maintain a decay counter so that when a sleeping entity re-awakens we can determine how much of its load should be removed from the blocked sum. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.585389902@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Aggregate load contributed by task entities on parenting cfs_rqPaul Turner
For a given task t, we can compute its contribution to load as: task_load(t) = runnable_avg(t) * weight(t) On a parenting cfs_rq we can then aggregate: runnable_load(cfs_rq) = \Sum task_load(t), for all runnable children t Maintain this bottom up, with task entities adding their contributed load to the parenting cfs_rq sum. When a task entity's load changes we add the same delta to the maintained sum. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.514678907@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Maintain per-rq runnable averagesBen Segall
Since runqueues do not have a corresponding sched_entity we instead embed a sched_avg structure directly. Signed-off-by: Ben Segall <bsegall@google.com> Reviewed-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.442637130@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24sched: Track the runnable average on a per-task entity basisPaul Turner
Instead of tracking averaging the load parented by a cfs_rq, we can track entity load directly. With the load for a given cfs_rq then being the sum of its children. To do this we represent the historical contribution to runnable average within each trailing 1024us of execution as the coefficients of a geometric series. We can express this for a given task t as: runnable_sum(t) = \Sum u_i * y^i, runnable_avg_period(t) = \Sum 1024 * y^i load(t) = weight_t * runnable_sum(t) / runnable_avg_period(t) Where: u_i is the usage in the last i`th 1024us period (approximately 1ms) ~ms and y is chosen such that y^k = 1/2. We currently choose k to be 32 which roughly translates to about a sched period. Signed-off-by: Paul Turner <pjt@google.com> Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120823141506.372695337@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>