summaryrefslogtreecommitdiff
path: root/kernel/sched_features.h
AgeCommit message (Collapse)Author
2009-01-15sched: prefer wakersPeter Zijlstra
Prefer tasks that wake other tasks to preempt quickly. This improves performance because more work is available sooner. The workload that prompted this patch was a kernel build over NFS4 (for some curious and not understood reason we had to revert commit: 18de9735300756e3ca9c361ef58409d8561dfe0d to make any progress at all) Without this patch a make -j8 bzImage (of x86-64 defconfig) would take 3m30-ish, with this patch we're down to 2m50-ish. psql-sysbench/mysql-sysbench show a slight improvement in peak performance as well, tbench and vmark seemed to not care. It is possible to improve upon the build time (to 2m20-ish) but that seriously destroys other benchmarks (just shows that there's more room for tinkering). Much thanks to Mike who put in a lot of effort to benchmark things and proved a worthy opponent with a competing patch. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05sched: backward looking buddyPeter Zijlstra
Impact: improve/change/fix wakeup-buddy scheduling Currently we only have a forward looking buddy, that is, we prefer to schedule to the task we last woke up, under the presumption that its going to consume the data we just produced, and therefore will have cache hot benefits. This allows co-waking producer/consumer task pairs to run ahead of the pack for a little while, keeping their cache warm. Without this, we would interleave all pairs, utterly trashing the cache. This patch introduces a backward looking buddy, that is, suppose that in the above scenario, the consumer preempts the producer before it can go to sleep, we will therefore miss the wakeup from consumer to producer (its already running, after all), breaking the cycle and reverting to the cache-trashing interleaved schedule pattern. The backward buddy will try to schedule back to the task that woke us up in case the forward buddy is not available, under the assumption that the last task will be the one with the most cache hot task around barring current. This will basically allow a task to continue after it got preempted. In order to avoid starvation, we allow either buddy to get wakeup_gran ahead of the pack. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20sched: disable the hrtick for nowIngo Molnar
David Miller reported that hrtick update overhead has tripled the wakeup overhead on Sparc64. That is too much - disable the HRTICK feature for now by default, until a faster implementation is found. Reported-by: David Miller <davem@davemloft.net> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22sched: turn off WAKEUP_OVERLAPIngo Molnar
WAKEUP_OVERLAP is not a winner on a 16way box, running psql+sysbench: .27-rc7-NO_WAKEUP_OVERLAP .27-rc7-WAKEUP_OVERLAP ------------------------------------------------- 1: 694 811 +14.39% 2: 1454 1427 -1.86% 4: 3017 3070 +1.70% 8: 5694 5808 +1.96% 16: 10592 10612 +0.19% 32: 9693 9647 -0.48% 64: 8507 8262 -2.97% 128: 8402 7087 -18.55% 256: 8419 5124 -64.30% 512: 7990 3671 -117.62% ------------------------------------------------- SUM: 64466 55524 -16.11% ... so turn it off by default. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22sched: wakeup preempt when small overlapPeter Zijlstra
Lin Ming reported a 10% OLTP regression against 2.6.27-rc4. The difference seems to come from different preemption agressiveness, which affects the cache footprint of the workload and its effective cache trashing. Aggresively preempt a task if its avg overlap is very small, this should avoid the task going to sleep and find it still running when we schedule back to it - saving a wakeup. Reported-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21sched: enable LB_BIAS by defaultPeter Zijlstra
Yanmin reported a significant regression on his 16-core machine due to: commit 93b75217df39e6d75889cc6f8050343286aff4a5 Author: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Fri Jun 27 13:41:33 2008 +0200 Flip back to the old behaviour. Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27sched: bias effective_load() error towards failing wake_affine().Peter Zijlstra
Measurement shows that the difference between cgroup:/ and cgroup:/foo wake_affine() results is that the latter succeeds significantly more. Therefore bias the calculations towards failing the test. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27sched: update shares on wakeupPeter Zijlstra
We found that the affine wakeup code needs rather accurate load figures to be effective. The trouble is that updating the load figures is fairly expensive with group scheduling. Therefore ratelimit the updating. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27sched: disable source/target_load biasPeter Zijlstra
The bias given by source/target_load functions can be very large, disable it by default to get faster convergence. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27sched: fix calc_delta_asym()Peter Zijlstra
calc_delta_asym() is supposed to do the same as calc_delta_fair() except linearly shrink the result for negative nice processes - this causes them to have a smaller preemption threshold so that they are more easily preempted. The problem is that for task groups se->load.weight is the per cpu share of the actual task group weight; take that into account. Also provide a debug switch to disable the asymmetry (which I still don't like - but it does greatly benefit some workloads) This would explain the interactivity issues reported against group scheduling. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27sched: revert the revert of: weight calculationsPeter Zijlstra
Try again.. initial commit: 8f1bc385cfbab474db6c27b5af1e439614f3025c revert: f9305d4a0968201b2818dbed0dc8cb0d4ee7aeb3 Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10sched: trivial sched_features cleanupMike Galbraith
Remove unused debug/tuning features. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19sched: /debug/sched_featuresPeter Zijlstra
provide a text based interface to the scheduler features; this saves the 'user' from setting bits using decimal arithmetic. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>