summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2010-08-24Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: watchdog: Don't throttle the watchdog tracing: Fix timer tracing
2010-08-24Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mutex: Improve the scalability of optimistic spinning
2010-08-23mutex: Improve the scalability of optimistic spinningTim Chen
There is a scalability issue for current implementation of optimistic mutex spin in the kernel. It is found on a 8 node 64 core Nehalem-EX system (HT mode). The intention of the optimistic mutex spin is to busy wait and spin on a mutex if the owner of the mutex is running, in the hope that the mutex will be released soon and be acquired, without the thread trying to acquire mutex going to sleep. However, when we have a large number of threads, contending for the mutex, we could have the mutex grabbed by other thread, and then another ……, and we will keep spinning, wasting cpu cycles and adding to the contention. One possible fix is to quit spinning and put the current thread on wait-list if mutex lock switch to a new owner while we spin, indicating heavy contention (see the patch included). I did some testing on a 8 socket Nehalem-EX system with a total of 64 cores. Using Ingo's test-mutex program that creates/delete files with 256 threads (http://lkml.org/lkml/2006/1/8/50) , I see the following speed up after putting in the mutex spin fix: ./mutex-test V 256 10 Ops/sec 2.6.34 62864 With fix 197200 Repeating the test with Aim7 fserver workload, again there is a speed up with the fix: Jobs/min 2.6.34 91657 With fix 149325 To look at the impact on the distribution of mutex acquisition time, I collected the mutex acquisition time on Aim7 fserver workload with some instrumentation. The average acquisition time is reduced by 48% and number of contentions reduced by 32%. #contentions Time to acquire mutex (cycles) 2.6.34 72973 44765791 With fix 49210 23067129 The histogram of mutex acquisition time is listed below. The acquisition time is in 2^bin cycles. We see that without the fix, the acquisition time is mostly around 2^26 cycles. With the fix, we the distribution get spread out a lot more towards the lower cycles, starting from 2^13. However, there is an increase of the tail distribution with the fix at 2^28 and 2^29 cycles. It seems a small price to pay for the reduced average acquisition time and also getting the cpu to do useful work. Mutex acquisition time distribution (acq time = 2^bin cycles): 2.6.34 With Fix bin #occurrence % #occurrence % 11 2 0.00% 120 0.24% 12 10 0.01% 790 1.61% 13 14 0.02% 2058 4.18% 14 86 0.12% 3378 6.86% 15 393 0.54% 4831 9.82% 16 710 0.97% 4893 9.94% 17 815 1.12% 4667 9.48% 18 790 1.08% 5147 10.46% 19 580 0.80% 6250 12.70% 20 429 0.59% 6870 13.96% 21 311 0.43% 1809 3.68% 22 255 0.35% 2305 4.68% 23 317 0.44% 916 1.86% 24 610 0.84% 233 0.47% 25 3128 4.29% 95 0.19% 26 63902 87.69% 122 0.25% 27 619 0.85% 286 0.58% 28 0 0.00% 3536 7.19% 29 0 0.00% 903 1.83% 30 0 0.00% 0 0.00% I've done similar experiments with 2.6.35 kernel on smaller boxes as well. One is on a dual-socket Westmere box (12 cores total, with HT). Another experiment is on an old dual-socket Core 2 box (4 cores total, no HT) On the 12-core Westmere box, I see a 250% increase for Ingo's mutex-test program with my mutex patch but no significant difference in aim7's fserver workload. On the 4-core Core 2 box, I see the difference with the patch for both mutex-test and aim7 fserver are negligible. So far, it seems like the patch has not caused regression on smaller systems. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> # .35.x LKML-Reference: <1282168827.9542.72.camel@schen9-DESK> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-23watchdog: Don't throttle the watchdogPeter Zijlstra
Stephane reported that when the machine locks up, the regular ticks, which are responsible to resetting the throttle count, stop too. Hence the NMI watchdog can end up being throttled before it reports on the locked up state, and we end up being sad.. Cure this by having the watchdog overflow reset its own throttle count. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1282215916.1926.4696.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-21workqueue: Add basic tracepoints to track workqueue executionArjan van de Ven
With the introduction of the new unified work queue thread pools, we lost one feature: It's no longer possible to know which worker is causing the CPU to wake out of idle. The result is that PowerTOP now reports a lot of "kworker/a:b" instead of more readable results. This patch adds a pair of tracepoints to the new workqueue code, similar in style to the timer/hrtimer tracepoints. With this pair of tracepoints, the next PowerTOP can correctly report which work item caused the wakeup (and how long it took): Interrupt (43) i915 time 3.51ms wakeups 141 Work ieee80211_iface_work time 0.81ms wakeups 29 Work do_dbs_timer time 0.55ms wakeups 24 Process Xorg time 21.36ms wakeups 4 Timer sched_rt_period_timer time 0.01ms wakeups 1 Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-21mm: make the vma list be doubly linkedLinus Torvalds
It's a really simple list, and several of the users want to go backwards in it to find the previous vma. So rather than have to look up the previous entry with 'find_vma_prev()' or something similar, just make it doubly linked instead. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20kfifo: implement missing __kfifo_skip_r()Andrea Righi
kfifo_skip() is currently broken, due to the missing of the internal helper function. Add it. Signed-off-by: Andrea Righi <arighi@develer.com> Cc: Greg KH <greg@kroah.com> Acked-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: brlock vfsmount_lock fs: scale files_lock lglock: introduce special lglock and brlock spin locks tty: fix fu_list abuse fs: cleanup files_lock locking fs: remove extra lookup in __lookup_hash fs: fs_struct rwlock to spinlock apparmor: use task path helpers fs: dentry allocation consolidation fs: fix do_lookup false negative mbcache: Limit the maximum number of cache entries hostfs ->follow_link() braino hostfs: dumb (and usually harmless) tpyo - strncpy instead of strlcpy remove SWRITE* I/O types kill BH_Ordered flag vfs: update ctime when changing the file's permission by setfacl cramfs: only unlock new inodes fix reiserfs_evict_inode end_writeback second call
2010-08-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix build on POSIX shells latencytop: Fix kconfig dependency warnings perf annotate tui: Fix exit and RIGHT keys handling tracing: Sanitize value returned from write(trace_marker, "...", len) tracing/events: Convert format output to seq_file tracing: Extend recordmcount to better support Blackfin mcount tracing: Fix ring_buffer_read_page reading out of page boundary tracing: Fix an unallocated memory access in function_graph
2010-08-18fs: fs_struct rwlock to spinlockNick Piggin
fs: fs_struct rwlock to spinlock struct fs_struct.lock is an rwlock with the read-side used to protect root and pwd members while taking references to them. Taking a reference to a path typically requires just 2 atomic ops, so the critical section is very small. Parallel read-side operations would have cacheline contention on the lock, the dentry, and the vfsmount cachelines, so the rwlock is unlikely to ever give a real parallelism increase. Replace it with a spinlock to avoid one or two atomic operations in typical path lookup fastpath. Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: vt,console,kdb: preserve console_blanked while in kdb vt: fix regression warnings from KMS merge arm,kgdb: fix GDB_MAX_REGS no longer used kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c kdb: fix compile error without CONFIG_KALLSYMS
2010-08-18Fix unprotected access to task credentials in waitid()Daniel J Blueman
Using a program like the following: #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> int main() { id_t id; siginfo_t infop; pid_t res; id = fork(); if (id == 0) { sleep(1); exit(0); } kill(id, SIGSTOP); alarm(1); waitid(P_PID, id, &infop, WCONTINUED); return 0; } to call waitid() on a stopped process results in access to the child task's credentials without the RCU read lock being held - which may be replaced in the meantime - eliciting the following warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/exit.c:1460 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by waitid02/22252: #0: (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310 #1: (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>] wait_consider_task+0x19a/0xbe0 stack backtrace: Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3 Call Trace: [<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0 [<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0 [<ffffffff81061d15>] do_wait+0xf5/0x310 [<ffffffff810620b6>] sys_waitid+0x86/0x1f0 [<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70 [<ffffffff81003282>] system_call_fastpath+0x16/0x1b This is fixed by holding the RCU read lock in wait_task_continued() to ensure that the task's current credentials aren't destroyed between us reading the cred pointer and us reading the UID from those credentials. Furthermore, protect wait_task_stopped() in the same way. We don't need to keep holding the RCU read lock once we've read the UID from the credentials as holding the RCU read lock doesn't stop the target task from changing its creds under us - so the credentials may be outdated immediately after we've read the pointer, lock or no lock. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-18Make do_execve() take a const filename pointerDavid Howells
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-16kdb: fix compile error without CONFIG_KALLSYMSJason Wessel
If CONFIG_KGDB_KDB is set and CONFIG_KALLSYMS is not set the kernel will fail to build with the error: kernel/built-in.o: In function `kallsyms_symbol_next': kernel/debug/kdb/kdb_support.c:237: undefined reference to `kdb_walk_kallsyms' kernel/built-in.o: In function `kallsyms_symbol_complete': kernel/debug/kdb/kdb_support.c:193: undefined reference to `kdb_walk_kallsyms' The kdb_walk_kallsyms needs a #ifdef proper header to match the C implementation. This patch also fixes the compiler warnings in kdb_support.c when compiling without CONFIG_KALLSYMS set. The compiler warnings are a result of the kallsyms_lookup() macro not initializing the two of the pass by reference variables. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reported-by: Michal Simek <monstr@monstr.eu>
2010-08-16Merge branch 'tip/perf/urgent-3' of ↵Steven Rostedt
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into trace/tip/perf/urgent-4 Conflicts: kernel/trace/trace_events.c Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-13tracing: Sanitize value returned from write(trace_marker, "...", len)Marcin Slusarz
When userspace code writes non-new-line-terminated string to trace_marker file, write handler appends new-line and returns number of bytes written to trace buffer, so write(fd, "abc", 3) will return 4 That's unexpected and unfortunately it confuses glibc's fprintf function. Example: int main() { fprintf(stderr, "abc"); return 0; } $ gcc test.c -o test $ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer $ ./test 2>/sys/kernel/debug/tracing/trace_marker results in infinite loop: write(fd, "abc", 3) = 4 write(fd, "", 1) = 0 write(fd, "", 1) = 0 write(fd, "", 1) = 0 write(fd, "", 1) = 0 write(fd, "", 1) = 0 write(fd, "", 1) = 0 write(fd, "", 1) = 0 (...) ...and kernel trace buffer full of empty markers. Fix it by sanitizing write return value. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> LKML-Reference: <20100727231801.GB2826@joi.lan> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-13time: Workaround gcc loop optimization that causes 64bit div errorsJohn Stultz
Early 4.3 versions of gcc apparently aggressively optimize the raw time accumulation loop, replacing it with a divide. On 32bit systems, this causes the following link errors: undefined reference to `__umoddi3' undefined reference to `__udivdi3' The gcc issue has been fixed in 4.4 and greater. This patch replaces the accumulation loop with a do_div, as suggested by Linus. Signed-off-by: John Stultz <johnstul@us.ibm.com> CC: Jason Wessel <jason.wessel@windriver.com> CC: Larry Finger <Larry.Finger@lwfinger.net> CC: Ingo Molnar <mingo@elte.hu> CC: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12Revert "fsnotify: store struct file not struct path"Linus Torvalds
This reverts commit 3bcf3860a4ff9bbc522820b4b765e65e4deceb3e (and the accompanying commit c1e5c954020e "vfs/fsnotify: fsnotify_close can delay the final work in fput" that was a horribly ugly hack to make it work at all). The 'struct file' approach not only causes that disgusting hack, it somehow breaks pulseaudio, probably due to some other subtlety with f_count handling. Fix up various conflicts due to later fsnotify work. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12tracing/events: Convert format output to seq_fileSteven Rostedt
Two new events were added that broke the current format output. Both from the SCSI system: scsi_dispatch_cmd_done and scsi_dispatch_cmd_timeout The reason is that their print_fmt exceeded a page size. Since the output of the format used simple_read_from_buffer and trace_seq, it was limited to a page size in output. This patch converts the printing of the format of an event into seq_file, which allows greater than a page size to be shown. I diffed all event formats comparing the output with and without this patch. All matched except for the above two, which showed just: FORMAT TOO BIG without this patch, but now properly displays the output with this patch. v2: Remove updating *pos in seq start function. [ Thanks to Li Zefan for pointing that out ] Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-12Merge branch 'params' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...
2010-08-12timekeeping: Fix overflow in rawtime tv_nsec on 32 bit archsJason Wessel
The tv_nsec is a long and when added to the shifted interval it can wrap and become negative which later causes looping problems in the getrawmonotonic(). The edge case occurs when the system has slept for a short period of time of ~2 seconds. A trace printk of the values in this patch illustrate the problem: ftrace time stamp: log 43.716079: logarithmic_accumulation: raw: 3d0913 tv_nsec d687faa 43.718513: logarithmic_accumulation: raw: 3d0913 tv_nsec da588bd 43.722161: logarithmic_accumulation: raw: 3d0913 tv_nsec de291d0 46.349925: logarithmic_accumulation: raw: 7a122600 tv_nsec e1f9ae3 46.349930: logarithmic_accumulation: raw: 1e848980 tv_nsec 8831c0e3 The kernel starts looping at 46.349925 in the getrawmonotonic() due to the negative value from adding the raw value to tv_nsec. A simple solution is to accumulate into a u64, and then normalize it to a timespec_t. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> [ Reworked variable names and simplified some of the code. - John ] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12Add a dummy printk function for the maintenance of unused printksDavid Howells
Add a dummy printk function for the maintenance of unused printks through gcc format checking, and also so that side-effect checking is maintained too. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12block: add secure discardAdrian Hunter
Secure discard is the same as discard except that all copies of the discarded sectors (perhaps created by garbage collection) must also be erased. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12kernel/kfifo.c: add handling of chained scatterlistsStefani Seibold
The current kfifo scatterlist implementation will not work with chained scatterlists. It assumes that struct scatterlist arrays are allocated contiguously, which is not the case when chained scatterlists (struct sg_table) are in use. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: isofs: Fix lseek() to position beyond 4 GB vfs: remove unused MNT_STRICTATIME vfs: show unreachable paths in getcwd and proc vfs: only add " (deleted)" where necessary vfs: add prepend_path() helper vfs: __d_path: dont prepend the name of the root dentry ia64: perfmon: add d_dname method vfs: add helpers to get root and pwd cachefiles: use path_get instead of lone dget fs/sysv/super.c: add support for non-PDP11 v7 filesystems V7: Adjust sanity checks for some volumes Add v7 alias v9fs: fixup for inode_setattr being removed Manual merge to take Al's version of the fs/sysv/super.c file: it merged cleanly, but Al had removed an unnecessary header include, so his side was better.
2010-08-11kfifo: replace the old non generic APIStefani Seibold
Simply replace the whole kfifo.c and kfifo.h files with the new generic version and fix the kerneldoc API template file. Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11kfifo: add the new generic kfifo APIStefani Seibold
Add the new version of the kfifo API files kfifo.c and kfifo.h. Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11kexec: return -EFAULT on copy_to_user() failuresDan Carpenter
copy_to/from_user() returns the number of bytes remaining to be copied. It never returns a negative value. The correct return code is -EFAULT and not -EIO. All the callers check for non-zero returns so that's Ok, but the return code is passed to the user so we should fix this. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11lib/bug.c: add oops end marker to WARN implementationAnton Blanchard
We are missing the oops end marker for the exception based WARN implementation in lib/bug.c. This is useful for logfile analysis tools. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11panic: keep blinking in spite of long spin timer modeTAMUKI Shoichi
To keep panic_timeout accuracy when running under a hypervisor, the current implementation only spins on long time (1 second) calls to mdelay. That brings a good effect, but the problem is the keyboard LEDs don't blink at all on that situation. This patch changes to call to panic_blink_enter() between every mdelay and keeps blinking in spite of long spin timer mode. The time to call to mdelay is now 100ms. Even this change will keep panic_timeout accuracy enough when running under a hypervisor. Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11pids: alloc_pidmap: remove the unnecessary boundary checksOleg Nesterov
alloc_pidmap() calculates max_scan so that if the initial offset != 0 we inspect the first map->page twice. This is correct, we want to find the unused bits < offset in this bitmap block. Add the comment. But it doesn't make any sense to stop the find_next_offset() loop when we are looking into this map->page for the second time. We have already already checked the bits >= offset during the first attempt, it is fine to do this again, no matter if we succeed this time or not. Remove this hard-to-understand code. It optimizes the very unlikely case when we are going to fail, but slows down the more likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Salman Qazi <sqazi@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11pids: fix a race in pid generation that causes pids to be reused immediatelySalman
A program that repeatedly forks and waits is susceptible to having the same pid repeated, especially when it competes with another instance of the same program. This is really bad for bash implementation. Furthermore, many shell scripts assume that pid numbers will not be used for some length of time. Race Description: A B // pid == offset == n // pid == offset == n + 1 test_and_set_bit(offset, map->page) test_and_set_bit(offset, map->page); pid_ns->last_pid = pid; pid_ns->last_pid = pid; // pid == n + 1 is freed (wait()) // Next fork()... last = pid_ns->last_pid; // == n pid = last + 1; Code to reproduce it (Running multiple instances is more effective): #include <errno.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> // The distance mod 32768 between two pids, where the first pid is expected // to be smaller than the second. int PidDistance(pid_t first, pid_t second) { return (second + 32768 - first) % 32768; } int main(int argc, char* argv[]) { int failed = 0; pid_t last_pid = 0; int i; printf("%d\n", sizeof(pid_t)); for (i = 0; i < 10000000; ++i) { if (i % 32786 == 0) printf("Iter: %d\n", i/32768); int child_exit_code = i % 256; pid_t pid = fork(); if (pid == -1) { fprintf(stderr, "fork failed, iteration %d, errno=%d", i, errno); exit(1); } if (pid == 0) { // Child exit(child_exit_code); } else { // Parent if (i > 0) { int distance = PidDistance(last_pid, pid); if (distance == 0 || distance > 30000) { fprintf(stderr, "Unexpected pid sequence: previous fork: pid=%d, " "current fork: pid=%d for iteration=%d.\n", last_pid, pid, i); failed = 1; } } last_pid = pid; int status; int reaped = wait(&status); if (reaped != pid) { fprintf(stderr, "Wait return value: expected pid=%d, " "got %d, iteration %d\n", pid, reaped, i); failed = 1; } else if (WEXITSTATUS(status) != child_exit_code) { fprintf(stderr, "Unexpected exit status %x, iteration %d\n", WEXITSTATUS(status), i); failed = 1; } } } exit(failed); } Thanks to Ted Tso for the key ideas of this implementation. Signed-off-by: Salman Qazi <sqazi@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11ptrace: optimize exit_ptrace() for the likely caseOleg Nesterov
exit_ptrace() takes tasklist_lock unconditionally. We need this lock to avoid the race with ptrace_traceme(), it acts as a barrier. Change its caller, forget_original_parent(), to call exit_ptrace() under tasklist_lock. Change exit_ptrace() to drop and reacquire this lock if needed. This allows us to add the fastpath list_empty(ptraced) check. In the likely no-tracees case exit_ptrace() just returns and we avoid the lock() + unlock() sequence. "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> suggested to add this check, and he reports that this change adds about 11% improvement in some tests. Suggested-and-tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11cgroups: save space for the terminatorDan Carpenter
The original code didn't leave enough space for a NULL terminator. These strings are copied with strcpy() into fixed length buffers in cgroup_root_from_opts(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ben Blum <bblum@andrew.cmu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11param: locking for kernel parametersRusty Russell
There may be cases (most obviously, sysfs-writable charp parameters) where a module needs to prevent sysfs access to parameters. Rather than express this in terms of a big lock, the functions are expressed in terms of what they protect against. This is clearer, esp. if the implementation changes to a module-level or even param-level lock. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: make param sections const.Rusty Russell
Since this section can be read-only (they're in .rodata), they should always have been const. Minor flow-through various functions. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: use free hook for charp (fix leak of charp parameters)Rusty Russell
Instead of using a "I kmalloced this" flag, we keep track of the kmalloced strings and use that list to check if we need to kfree (in practice, the list is very short). This means that kparams can be const again, and plugs a leak. This is important for drivers/usb/gadget/nokia.c which gets modprobe/rmmod'ed frequently on the N9000. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Cc: Artem Bityutskiy <dedekind1@gmail.com> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: add a free hook to kernel_param_ops.Rusty Russell
This allows us to generalize the KPARAM_KMALLOCED flag, by calling a function on every parameter when a module is unloaded. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: use ops in struct kernel_param, rather than get and set fns directlyRusty Russell
This is more kernel-ish, saves some space, and also allows us to expand the ops without breaking all the callers who are happy for the new members to be NULL. The few places which defined their own param types are changed to the new scheme (more which crept in recently fixed in following patches). Since we're touching them anyway, we change get() and set() to take a const struct kernel_param (which they really are). This causes some harmless warnings until we fix them (in following patches). To reduce churn, module_param_call creates the ops struct so the callers don't have to change (and casts the functions to reduce warnings). The modern version which takes an ops struct is called module_param_cb. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Michal Januszewski <spock@gentoo.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-kernel@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-fbdev-devel@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org
2010-08-11param: move the EXPORT_SYMBOL to after the definitions.Rusty Russell
This is modern style, and good to do before we start changing things. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11params: don't hand NULL values to param.set callbacks.Rusty Russell
An audit by Dongdong Deng revealed that most driver-author-written param calls don't handle val == NULL (which happens when parameters are specified with no =, eg "foo" instead of "foo=1"). The only real case to use this is boolean, so handle it specially for that case and remove a source of bugs for everyone else. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dongdong Deng <dongdong.deng@windriver.com> Cc: Américo Wang <xiyou.wangcong@gmail.com>
2010-08-11vfs: add helpers to get root and pwdMiklos Szeredi
Add three helpers that retrieve a refcounted copy of the root and cwd from the supplied fs_struct. get_fs_root() get_fs_pwd() get_fs_root_and_pwd() Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10kernel/timer.c: fix kernel-doc function parameter warningRandy Dunlap
Fix kernel-doc warning, add @timer description: Warning(kernel/timer.c:335): No description found for parameter 'timer' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge branch 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linuxLinus Torvalds
* 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux: unistd: add __NR_prlimit64 syscall numbers rlimits: implement prlimit64 syscall rlimits: switch more rlimit syscalls to do_prlimit rlimits: redo do_setrlimit to more generic do_prlimit rlimits: add rlimit64 structure rlimits: do security check under task_lock rlimits: allow setrlimit to non-current tasks rlimits: split sys_setrlimit rlimits: selinux, do rlimits changes under task_lock rlimits: make sure ->rlim_max never grows in sys_setrlimit rlimits: add task_struct to update_rlimit_cpu rlimits: security, add task_struct to setrlimit Fix up various system call number conflicts. We not only added fanotify system calls in the meantime, but asm-generic/unistd.h added a wait4 along with a range of reserved per-architecture system calls.
2010-08-10Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits) fanotify: use both marks when possible fsnotify: pass both the vfsmount mark and inode mark fsnotify: walk the inode and vfsmount lists simultaneously fsnotify: rework ignored mark flushing fsnotify: remove global fsnotify groups lists fsnotify: remove group->mask fsnotify: remove the global masks fsnotify: cleanup should_send_event fanotify: use the mark in handler functions audit: use the mark in handler functions dnotify: use the mark in handler functions inotify: use the mark in handler functions fsnotify: send fsnotify_mark to groups in event handling functions fsnotify: Exchange list heads instead of moving elements fsnotify: srcu to protect read side of inode and vfsmount locks fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called fsnotify: use _rcu functions for mark list traversal fsnotify: place marks on object in order of group memory address vfs/fsnotify: fsnotify_close can delay the final work in fput fsnotify: store struct file not struct path ... Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10gcc-4.6: printk: use stable variable to dump kmsg bufferAndi Kleen
kmsg_dump takes care to sample the global variables inside a spinlock, but then goes on to use the same variables outside the spinlock region too. Use the correct variable. This will make the race window smaller. Found by gcc 4.6's new warnings. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10stop_machine: struct cpu_stopper, remove alignment padding on 64 bitsRichard Kennedy
Reorder elements in structure cpu_stopper to remove alignment padding on 64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes per cpu. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10kernel/range: remove unused definition of ARRAY_SIZE()Geert Uytterhoeven
Remove duplicate definition of ARRAY_SIZE(), which was never used anyway. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>