summaryrefslogtreecommitdiff
path: root/mm/filemap.c
AgeCommit message (Collapse)Author
2005-09-05[PATCH] shmem_populate: avoid an useless check, and some commentsPaolo 'Blaisorblade' Giarrusso
Either shmem_getpage returns a failure, or it found a page, or it was told it couldn't do any I/O. So it's useless to check nonblock in the else branch. We could add a BUG() there but I preferred to comment the offending function. This was taken out from one Ingo Molnar's old patch I'm resurrecting. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] swap: swap_lock replace list+deviceHugh Dickins
The idea of a swap_device_lock per device, and a swap_list_lock over them all, is appealing; but in practice almost every holder of swap_device_lock must already hold swap_list_lock, which defeats the purpose of the split. The only exceptions have been swap_duplicate, valid_swaphandles and an untrodden path in try_to_unuse (plus a few places added in this series). valid_swaphandles doesn't show up high in profiles, but swap_duplicate does demand attention. However, with the hold time in get_swap_pages so much reduced, I've not yet found a load and set of swap device priorities to show even swap_duplicate benefitting from the split. Certainly the split is mere overhead in the common case of a single swap device. So, replace swap_list_lock and swap_device_lock by spinlock_t swap_lock (generally we seem to prefer an _ in the name, and not hide in a macro). If someone can show a regression in swap_duplicate, then probably we should add a hashlock for the swap_map entries alone (shorts being anatomic), so as to help the case of the single swap device too. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] fix for generic_file_write iov problemBadari Pulavarty
Here is the fix for the problem described in http://bugzilla.kernel.org/show_bug.cgi?id=4721 Basically, problem is generic_file_buffered_write() is accessing beyond end of the iov[] vector after handling the last vector. If we happen to cross page boundary, we get a fault. I think this simple patch is good enough. If we really don't want to depend on the "count", then we need pass nr_segs to filemap_set_next_iovec() and decrement it and check it. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Fix the error handling in direct I/OHifumi Hisashi
Fix a bug on error handling in the direct I/O function. Currently, if a file is opened with the O_DIRECT|O_SYNC flag, the write() syscall cannot receive the EIO error after an I/O error (SCSI cable is disconnected etc.). Return values of other points that call generic_osync_inode() are treated appropriately. Signed-off-by: Hisashi Hifumi <hifumi.hisashi@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] xip: fs/mm: execute in placeCarsten Otte
- generic_file* file operations do no longer have a xip/non-xip split - filemap_xip.c implements a new set of fops that require get_xip_page aop to work proper. all new fops are exported GPL-only (don't like to see whatever code use those except GPL modules) - __xip_unmap now uses page_check_address, which is no longer static in rmap.c, and defined in linux/rmap.h - mm/filemap.h is now much more clean, plainly having just Linus' inline funcs moved here from filemap.c - fix includes in filemap_xip to make it build cleanly on i386 Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] Remove f_error field from struct fileChristoph Lameter
The following patch removes the f_error field and all checks of f_error. Trond said: f_error was introduced for NFS, and made sense when we were guaranteed always to have a file pointer around when write errors occurred. Since then, we have (for various reasons) had to introduce the nfs_open_context in order to track the file read/write state, and it made sense to move our f_error tracking there too. Signed-off-by: Christoph Lameter <christoph@lameter.com> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-06[PATCH] broken fault_in_pages_readable call in generic_file_buffered_write()Martin Schwidefsky
fault_in_pages_readable() is being passed an incorrect `end' address, which can result in writes accidentally faulting in pages which will not be affected by the write() call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21[PATCH] fix for __generic_file_aio_read() to return 0 on EOFSuparna Bhattacharya
I came across the following problem while running ltp-aiodio testcases from ltp-full-20050405 on linux-2.6.12-rc3-mm3. I tried running the tests with EXT3 as well as JFS filesystems. One or two fsx-linux testcases were hung after some time. These testcases were hanging at wait_for_all_aios(). Debugging shows that there were some iocbs which were not getting completed eventhough the last retry for those returned -EIOCBQUEUED. Also all such pending iocbs represented READ operation. Further debugging revealed that all such iocbs hit EOF in the DIO layer. To be more precise, the "pos" from which they were trying to read was greater than the "size" of the file. So the generic_file_direct_IO returned 0. This happens rarely as there is already a check in __generic_file_aio_read(), for whether "pos" < "size" before calling direct IO routine. >size = i_size_read(inode); >if (pos < size) { > retval = generic_file_direct_IO(READ, iocb, > iov, pos, nr_segs); But for READ, we are taking the inode->i_sem only in the DIO layer. So it is possible that some other process can change the size of the file before we take the i_sem. In such a case ( when "pos" > "size"), the __generic_file_aio_read() would return -EIOCBQUEUED even though there were no I/O requests submitted by the DIO layer. This would cause the AIO layer to expect aio_complete() for THE iocb, which doesnot happen. And thus the test hangs forever, waiting for an I/O completion, where there are no requests submitted at all. The following patch makes __generic_file_aio_read() return 0 (instead of returning -EIOCBQUEUED), on getting 0 from generic_file_direct_IO(), so that the AIO layer does the aio_complete(). Testing: I have tested the patch on a SMP machine(with 2 Pentium 4 (HT)) running linux-2.6.12-rc3-mm3. I ran the ltp-aiodio testcases and none of the fsx-linux tests hung. Also the aio-stress tests ran without any problem. Signed-off-by: Suzuki K P <suzuki@in.ibm.com> Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05[PATCH] remove outdated comments from filemap.cChristoph Hellwig
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] DocBook: fix some descriptionsMartin Waitz
Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] Exterminate PAGE_BUGMatt Mackall
Remove PAGE_BUG - repalce it with BUG and BUG_ON. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] sync_page() smp_mb() commentWilliam Lee Irwin III
The smp_mb() is becaus sync_page() doesn't have PG_locked while it accesses page_mapping(page). The comments in the patch (the entire patch is the addition of this comment) try to explain further how and why smp_mb() is used. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] generic_file_buffered_write fixesakpm@osdl.org
Anton Altaparmakov <aia21@cam.ac.uk> points out: - It calls fault_in_pages_readable() which is completely bogus if @nr_segs > 1. It needs to be replaced by a to be written "fault_in_pages_readable_iovec()". - It increments @buf even in the iovec case thus @buf can point to random memory really quickly (in the iovec case) and then it calls fault_in_pages_readable() on this random memory. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] filemap_getpage can block when MAP_NONBLOCK specifiedJeff Moyer
We will return NULL from filemap_getpage when a page does not exist in the page cache and MAP_NONBLOCK is specified, here: page = find_get_page(mapping, pgoff); if (!page) { if (nonblock) return NULL; goto no_cached_page; } But we forget to do so when the page in the cache is not uptodate. The following could result in a blocking call: /* * Ok, found a page in the page cache, now we need to check * that it's up-to-date. */ if (!PageUptodate(page)) goto page_not_uptodate; Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!