| Age | Commit message (Collapse) | Author |
|---|
|
Currently we do not check for vma flags if sys_move_pages is called to move
individual pages. If sys_migrate_pages is called to move pages then we
check for vm_flags that indicate a non migratable vma but that still
includes VM_LOCKED and we can migrate mlocked pages.
Extract the vma_migratable check from mm/mempolicy.c, fix it and put it
into migrate.h so that is can be used from both locations.
Problem was spotted by Lee Schermerhorn
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bind_zonelist() can create zero-length zonelist if there is a
memory-less-node. This patch checks the length of zonelist. If length is
0, returns -EINVAL.
tested on ia64/NUMA with memory-less-node.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset follows up on the earlier work in Andrew's tree to reduce the
number of zones. The patches allow to go to a minimum of 2 zones. This one
allows also to make ZONE_DMA optional and therefore the number of zones can be
reduced to one.
ZONE_DMA is usually used for ISA DMA devices. There are a number of reasons
why we would not want to have ZONE_DMA
1. Some arches do not need ZONE_DMA at all.
2. With the advent of IOMMUs DMA zones are no longer needed.
The necessity of DMA zones may drastically be reduced
in the future. This patchset allows a compilation of
a kernel without that overhead.
3. Devices that require ISA DMA get rare these days. All
my systems do not have any need for ISA DMA.
4. The presence of an additional zone unecessarily complicates
VM operations because it must be scanned and balancing
logic must operate on its.
5. With only ZONE_NORMAL one can reach the situation where
we have only one zone. This will allow the unrolling of many
loops in the VM and allows the optimization of varous
code paths in the VM.
6. Having only a single zone in a NUMA system results in a
1-1 correspondence between nodes and zones. Various additional
optimizations to critical VM paths become possible.
Many systems today can operate just fine with a single zone. If you look at
what is in ZONE_DMA then one usually sees that nothing uses it. The DMA slabs
are empty (Some arches use ZONE_DMA instead of ZONE_NORMAL, then ZONE_NORMAL
will be empty instead).
On all of my systems (i386, x86_64, ia64) ZONE_DMA is completely empty. Why
constantly look at an empty zone in /proc/zoneinfo and empty slab in
/proc/slabinfo? Non i386 also frequently have no need for ZONE_DMA and zones
stay empty.
The patchset was tested on i386 (UP / SMP), x86_64 (UP, NUMA) and ia64 (NUMA).
The RFC posted earlier (see
http://marc.theaimsgroup.com/?l=linux-kernel&m=115231723513008&w=2) had lots
of #ifdefs in them. An effort has been made to minize the number of #ifdefs
and make this as compact as possible. The job was made much easier by the
ongoing efforts of others to extract common arch specific functionality.
I have been running this for awhile now on my desktop and finally Linux is
using all my available RAM instead of leaving the 16MB in ZONE_DMA untouched:
christoph@pentium940:~$ cat /proc/zoneinfo
Node 0, zone Normal
pages free 4435
min 1448
low 1810
high 2172
active 241786
inactive 210170
scanned 0 (a: 0 i: 0)
spanned 524224
present 524224
nr_anon_pages 61680
nr_mapped 14271
nr_file_pages 390264
nr_slab_reclaimable 27564
nr_slab_unreclaimable 1793
nr_page_table_pages 449
nr_dirty 39
nr_writeback 0
nr_unstable 0
nr_bounce 0
cpu: 0 pcp: 0
count: 156
high: 186
batch: 31
cpu: 0 pcp: 1
count: 9
high: 62
batch: 15
vm stats threshold: 20
cpu: 1 pcp: 0
count: 177
high: 186
batch: 31
cpu: 1 pcp: 1
count: 12
high: 62
batch: 15
vm stats threshold: 20
all_unreclaimable: 0
prev_priority: 12
temp_priority: 12
start_pfn: 0
This patch:
In two places in the VM we use ZONE_DMA to refer to the first zone. If
ZONE_DMA is optional then other zones may be first. So simply replace
ZONE_DMA with zone 0.
This also fixes ZONETABLE_PGSHIFT. If we have only a single zone then
ZONES_PGSHIFT may become 0 because there is no need anymore to encode the zone
number related to a pgdat. However, we still need a zonetable to index all
the zones for each node if this is a NUMA system. Therefore define
ZONETABLE_SHIFT unconditionally as the offset of the ZONE field in page flags.
[apw@shadowen.org: fix mismerge]
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently one can specify an arbitrary node mask to mbind that includes
nodes not allowed. If that is done with an interleave policy then we will
go around all the nodes. Those outside of the currently allowed cpuset
will be redirected to the border nodes. Interleave will then create
imbalances at the borders of the cpuset.
This patch restricts the nodes to the currently allowed cpuset.
The RFC for this patch was discussed at
http://marc.theaimsgroup.com/?t=116793842100004&r=1&w=2
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- move some file_operations structs into the .rodata section
- move static strings from policy_types[] array into the .rodata section
- fix generic seq_operations usages, so that those structs may be defined
as "const" as well
[akpm@osdl.org: couple of fixes]
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
NUMA node ids are passed as either int or unsigned int almost exclusivly
page_to_nid and zone_to_nid both return unsigned long. This is a throw
back to when page_to_nid was a #define and was thus exposing the real type
of the page flags field.
In addition to fixing up the definitions of page_to_nid and zone_to_nid I
audited the users of these functions identifying the following incorrect
uses:
1) mm/page_alloc.c show_node() -- printk dumping the node id,
2) include/asm-ia64/pgalloc.h pgtable_quicklist_free() -- comparison
against numa_node_id() which returns an int from cpu_to_node(), and
3) mm/mpolicy.c check_pte_range -- used as an index in node_isset which
uses bit_set which in generic code takes an int.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Optimize the critical zonelist scanning for free pages in the kernel memory
allocator by caching the zones that were found to be full recently, and
skipping them.
Remembers the zones in a zonelist that were short of free memory in the
last second. And it stashes a zone-to-node table in the zonelist struct,
to optimize that conversion (minimize its cache footprint.)
Recent changes:
This differs in a significant way from a similar patch that I
posted a week ago. Now, instead of having a nodemask_t of
recently full nodes, I have a bitmask of recently full zones.
This solves a problem that last weeks patch had, which on
systems with multiple zones per node (such as DMA zone) would
take seeing any of these zones full as meaning that all zones
on that node were full.
Also I changed names - from "zonelist faster" to "zonelist cache",
as that seemed to better convey what we're doing here - caching
some of the key zonelist state (for faster access.)
See below for some performance benchmark results. After all that
discussion with David on why I didn't need them, I went and got
some ;). I wanted to verify that I had not hurt the normal case
of memory allocation noticeably. At least for my one little
microbenchmark, I found (1) the normal case wasn't affected, and
(2) workloads that forced scanning across multiple nodes for
memory improved up to 10% fewer System CPU cycles and lower
elapsed clock time ('sys' and 'real'). Good. See details, below.
I didn't have the logic in get_page_from_freelist() for various
full nodes and zone reclaim failures correct. That should be
fixed up now - notice the new goto labels zonelist_scan,
this_zone_full, and try_next_zone, in get_page_from_freelist().
There are two reasons I persued this alternative, over some earlier
proposals that would have focused on optimizing the fake numa
emulation case by caching the last useful zone:
1) Contrary to what I said before, we (SGI, on large ia64 sn2 systems)
have seen real customer loads where the cost to scan the zonelist
was a problem, due to many nodes being full of memory before
we got to a node we could use. Or at least, I think we have.
This was related to me by another engineer, based on experiences
from some time past. So this is not guaranteed. Most likely, though.
The following approach should help such real numa systems just as
much as it helps fake numa systems, or any combination thereof.
2) The effort to distinguish fake from real numa, using node_distance,
so that we could cache a fake numa node and optimize choosing
it over equivalent distance fake nodes, while continuing to
properly scan all real nodes in distance order, was going to
require a nasty blob of zonelist and node distance munging.
The following approach has no new dependency on node distances or
zone sorting.
See comment in the patch below for a description of what it actually does.
Technical details of note (or controversy):
- See the use of "zlc_active" and "did_zlc_setup" below, to delay
adding any work for this new mechanism until we've looked at the
first zone in zonelist. I figured the odds of the first zone
having the memory we needed were high enough that we should just
look there, first, then get fancy only if we need to keep looking.
- Some odd hackery was needed to add items to struct zonelist, while
not tripping up the custom zonelists built by the mm/mempolicy.c
code for MPOL_BIND. My usual wordy comments below explain this.
Search for "MPOL_BIND".
- Some per-node data in the struct zonelist is now modified frequently,
with no locking. Multiple CPU cores on a node could hit and mangle
this data. The theory is that this is just performance hint data,
and the memory allocator will work just fine despite any such mangling.
The fields at risk are the struct 'zonelist_cache' fields 'fullzones'
(a bitmask) and 'last_full_zap' (unsigned long jiffies). It should
all be self correcting after at most a one second delay.
- This still does a linear scan of the same lengths as before. All
I've optimized is making the scan faster, not algorithmically
shorter. It is now able to scan a compact array of 'unsigned
short' in the case of many full nodes, so one cache line should
cover quite a few nodes, rather than each node hitting another
one or two new and distinct cache lines.
- If both Andi and Nick don't find this too complicated, I will be
(pleasantly) flabbergasted.
- I removed the comment claiming we only use one cachline's worth of
zonelist. We seem, at least in the fake numa case, to have put the
lie to that claim.
- I pay no attention to the various watermarks and such in this performance
hint. A node could be marked full for one watermark, and then skipped
over when searching for a page using a different watermark. I think
that's actually quite ok, as it will tend to slightly increase the
spreading of memory over other nodes, away from a memory stressed node.
===============
Performance - some benchmark results and analysis:
This benchmark runs a memory hog program that uses multiple
threads to touch alot of memory as quickly as it can.
Multiple runs were made, touching 12, 38, 64 or 90 GBytes out of
the total 96 GBytes on the system, and using 1, 19, 37, or 55
threads (on a 56 CPU system.) System, user and real (elapsed)
timings were recorded for each run, shown in units of seconds,
in the table below.
Two kernels were tested - 2.6.18-mm3 and the same kernel with
this zonelist caching patch added. The table also shows the
percentage improvement the zonelist caching sys time is over
(lower than) the stock *-mm kernel.
number 2.6.18-mm3 zonelist-cache delta (< 0 good) percent
GBs N ------------ -------------- ---------------- systime
mem threads sys user real sys user real sys user real better
12 1 153 24 177 151 24 176 -2 0 -1 1%
12 19 99 22 8 99 22 8 0 0 0 0%
12 37 111 25 6 112 25 6 1 0 0 -0%
12 55 115 25 5 110 23 5 -5 -2 0 4%
38 1 502 74 576 497 73 570 -5 -1 -6 0%
38 19 426 78 48 373 76 39 -53 -2 -9 12%
38 37 544 83 36 547 82 36 3 -1 0 -0%
38 55 501 77 23 511 80 24 10 3 1 -1%
64 1 917 125 1042 890 124 1014 -27 -1 -28 2%
64 19 1118 138 119 965 141 103 -153 3 -16 13%
64 37 1202 151 94 1136 150 81 -66 -1 -13 5%
64 55 1118 141 61 1072 140 58 -46 -1 -3 4%
90 1 1342 177 1519 1275 174 1450 -67 -3 -69 4%
90 19 2392 199 192 2116 189 176 -276 -10 -16 11%
90 37 3313 238 175 2972 225 145 -341 -13 -30 10%
90 55 1948 210 104 1843 213 100 -105 3 -4 5%
Notes:
1) This test ran a memory hog program that started a specified number N of
threads, and had each thread allocate and touch 1/N'th of
the total memory to be used in the test run in a single loop,
writing a constant word to memory, one store every 4096 bytes.
Watching this test during some earlier trial runs, I would see
each of these threads sit down on one CPU and stay there, for
the remainder of the pass, a different CPU for each thread.
2) The 'real' column is not comparable to the 'sys' or 'user' columns.
The 'real' column is seconds wall clock time elapsed, from beginning
to end of that test pass. The 'sys' and 'user' columns are total
CPU seconds spent on that test pass. For a 19 thread test run,
for example, the sum of 'sys' and 'user' could be up to 19 times the
number of 'real' elapsed wall clock seconds.
3) Tests were run on a fresh, single-user boot, to minimize the amount
of memory already in use at the start of the test, and to minimize
the amount of background activity that might interfere.
4) Tests were done on a 56 CPU, 28 Node system with 96 GBytes of RAM.
5) Notice that the 'real' time gets large for the single thread runs, even
though the measured 'sys' and 'user' times are modest. I'm not sure what
that means - probably something to do with it being slow for one thread to
be accessing memory along ways away. Perhaps the fake numa system, running
ostensibly the same workload, would not show this substantial degradation
of 'real' time for one thread on many nodes -- lets hope not.
6) The high thread count passes (one thread per CPU - on 55 of 56 CPUs)
ran quite efficiently, as one might expect. Each pair of threads needed
to allocate and touch the memory on the node the two threads shared, a
pleasantly parallizable workload.
7) The intermediate thread count passes, when asking for alot of memory forcing
them to go to a few neighboring nodes, improved the most with this zonelist
caching patch.
Conclusions:
* This zonelist cache patch probably makes little difference one way or the
other for most workloads on real numa hardware, if those workloads avoid
heavy off node allocations.
* For memory intensive workloads requiring substantial off-node allocations
on real numa hardware, this patch improves both kernel and elapsed timings
up to ten per-cent.
* For fake numa systems, I'm optimistic, but will have to leave that up to
Rohit Seth to actually test (once I get him a 2.6.18 backport.)
Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: David Rientjes <rientjes@cs.washington.edu>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
With CONFIG_MIGRATION=n
mm/mempolicy.c: In function 'do_mbind':
mm/mempolicy.c:796: warning: passing argument 2 of 'migrate_pages' from incompatible pointer type
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch insures that the slab node lists in the NUMA case only contain
slabs that belong to that specific node. All slab allocations use
GFP_THISNODE when calling into the page allocator. If an allocation fails
then we fall back in the slab allocator according to the zonelists appropriate
for a certain context.
This allows a replication of the behavior of alloc_pages and alloc_pages node
in the slab layer.
Currently allocations requested from the page allocator may be redirected via
cpusets to other nodes. This results in remote pages on nodelists and that in
turn results in interrupt latency issues during cache draining. Plus the slab
is handing out memory as local when it is really remote.
Fallback for slab memory allocations will occur within the slab allocator and
not in the page allocator. This is necessary in order to be able to use the
existing pools of objects on the nodes that we fall back to before adding more
pages to a slab.
The fallback function insures that the nodes we fall back to obey cpuset
restrictions of the current context. We do not allocate objects from outside
of the current cpuset context like before.
Note that the implementation of locality constraints within the slab allocator
requires importing logic from the page allocator. This is a mischmash that is
not that great. Other allocators (uncached allocator, vmalloc, huge pages)
face similar problems and have similar minimal reimplementations of the basic
fallback logic of the page allocator. There is another way of implementing a
slab by avoiding per node lists (see modular slab) but this wont work within
the existing slab.
V1->V2:
- Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA
- Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another
#ifdef
[akpm@osdl.org: build fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There are many places where we need to determine the node of a zone.
Currently we use a difficult to read sequence of pointer dereferencing.
Put that into an inline function and use throughout VM. Maybe we can find
a way to optimize the lookup in the future.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
cpuset/memory policy restrictions
Add a new gfp flag __GFP_THISNODE to avoid fallback to other nodes. This
flag is essential if a kernel component requires memory to be located on a
certain node. It will be needed for alloc_pages_node() to force allocation
on the indicated node and for alloc_pages() to force allocation on the
current node.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I wonder why we need this bitmask indexing into zone->node_zonelists[]?
We always start with the highest zone and then include all lower zones
if we build zonelists.
Are there really cases where we need allocation from ZONE_DMA or
ZONE_HIGHMEM but not ZONE_NORMAL? It seems that the current implementation
of highest_zone() makes that already impossible.
If we go linear on the index then gfp_zone() == highest_zone() and a lot
of definitions fall by the wayside.
We can now revert back to the use of gfp_zone() in mempolicy.c ;-)
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
After we have done this we can now do some typing cleanup.
The memory policy layer keeps a policy_zone that specifies
the zone that gets memory policies applied. This variable
can now be of type enum zone_type.
The check_highest_zone function and the build_zonelists funnctionm must
then also take a enum zone_type parameter.
Plus there are a number of loops over zones that also should use
zone_type.
We run into some troubles at some points with functions that need a
zone_type variable to become -1. Fix that up.
[pj@sgi.com: fix set_mempolicy() crash]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There is a check in zonelist_policy that compares pieces of the bitmap
obtained from a gfp mask via GFP_ZONETYPES with a zone number in function
zonelist_policy().
The bitmap is an ORed mask of __GFP_DMA, __GFP_DMA32 and __GFP_HIGHMEM.
The policy_zone is a zone number with the possible values of ZONE_DMA,
ZONE_DMA32, ZONE_HIGHMEM and ZONE_NORMAL. These are two different domains
of values.
For some reason seemed to work before the zone reduction patchset (It
definitely works on SGI boxes since we just have one zone and the check
cannot fail).
With the zone reduction patchset this check definitely fails on systems
with two zones if the system actually has memory in both zones.
This is because ZONE_NORMAL is selected using no __GFP flag at
all and thus gfp_zone(gfpmask) == 0. ZONE_DMA is selected when __GFP_DMA
is set. __GFP_DMA is 0x01. So gfp_zone(gfpmask) == 1.
policy_zone is set to ZONE_NORMAL (==1) if ZONE_NORMAL and ZONE_DMA are
populated.
For ZONE_NORMAL gfp_zone(<no _GFP_DMA>) yields 0 which is <
policy_zone(ZONE_NORMAL) and so policy is not applied to regular memory
allocations!
Instead gfp_zone(__GFP_DMA) == 1 which results in policy being applied
to DMA allocations!
What we realy want in that place is to establish the highest allowable
zone for a given gfp_mask. If the highest zone is higher or equal to the
policy_zone then memory policies need to be applied. We have such
a highest_zone() function in page_alloc.c.
So move the highest_zone() function from mm/page_alloc.c into
include/linux/gfp.h. On the way we simplify the function and use the new
zone_type that was also introduced with the zone reduction patchset plus we
also specify the right type for the gfp flags parameter.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Since vma->vm_pgoff is in units of smallpages, VMAs for huge pages have the
lower HPAGE_SHIFT - PAGE_SHIFT bits always cleared, which results in badd
offsets to the interleave functions. Take this difference from small pages
into account when calculating the offset. This does add a 0-bit shift into
the small-page path (via alloc_page_vma()), but I think that is negligible.
Also add a BUG_ON to prevent the offset from growing due to a negative
right-shift, which probably shouldn't be allowed anyways.
Tested on an 8-memory node ppc64 NUMA box and got the interleaving I
expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The numa statistics are really event counters. But they are per node and
so we have had special treatment for these counters through additional
fields on the pcp structure. We can now use the per zone nature of the
zoned VM counters to realize these.
This will shrink the size of the pcp structure on NUMA systems. We will
have some room to add additional per zone counters that will all still fit
in the same cacheline.
Bits Prior pcp size Size after patch We can add
------------------------------------------------------------------
64 128 bytes (16 words) 80 bytes (10 words) 48
32 76 bytes (19 words) 56 bytes (14 words) 8 (64 byte cacheline)
72 (128 byte)
Remove the special statistics for numa and replace them with zoned vm
counters. This has the side effect that global sums of these events now
show up in /proc/vmstat.
Also take the opportunity to move the zone_statistics() function from
page_alloc.c into vmstat.c.
Discussions:
V2 http://marc.theaimsgroup.com/?t=115048227000002&r=1&w=2
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Every inode in /proc holds a reference to a struct task_struct. If a
directory or file is opened and remains open after the the task exits this
pinning continues. With 8K stacks on a 32bit machine the amount pinned per
file descriptor is about 10K.
Normally I would figure a reasonable per user process limit is about 100
processes. With 80 processes, with a 1000 file descriptors each I can trigger
the 00M killer on a 32bit kernel, because I have pinned about 800MB of useless
data.
This patch replaces the struct task_struct pointer with a pointer to a struct
task_ref which has a struct task_struct pointer. The so the pinning of dead
tasks does not happen.
The code now has to contend with the fact that the task may now exit at any
time. Which is a little but not muh more complicated.
With this change it takes about 1000 processes each opening up 1000 file
descriptors before I can trigger the OOM killer. Much better.
[mlp@google.com: task_mmu small fixes]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Paul Jackson <pj@sgi.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Albert Cahalan <acahalan@gmail.com>
Signed-off-by: Prasanna Meda <mlp@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Hooks for calling vma specific migration functions
With this patch a vma may define a vma->vm_ops->migrate function. That
function may perform page migration on its own (some vmas may not contain page
structs and therefore cannot be handled by regular page migration. Pages in a
vma may require special preparatory treatment before migration is possible
etc) . Only mmap_sem is held when the migration function is called. The
migrate() function gets passed two sets of nodemasks describing the source and
the target of the migration. The flags parameter either contains
MPOL_MF_MOVE which means that only pages used exclusively by
the specified mm should be moved
or
MPOL_MF_MOVE_ALL which means that pages shared with other processes
should also be moved.
The migration function returns 0 on success or an error condition. An error
condition will prevent regular page migration from occurring.
On its own this patch cannot be included since there are no users for this
functionality. But it seems that the uncached allocator will need this
functionality at some point.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch inserts security_task_movememory hook calls into memory management
code to enable security modules to mediate this operation between tasks.
Since the last posting, the hook has been renamed following feedback from
Christoph Lameter.
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.
long move_pages(pid, number_of_pages_to_move,
addresses_of_pages[],
nodes[] or NULL,
status[],
flags);
The addresses of pages is an array of void * pointing to the
pages to be moved.
The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.
The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.
Possible page states in status[]:
0..MAX_NUMNODES The page is now on the indicated node.
-ENOENT Page is not present
-EACCES Page is mapped by multiple processes and can only
be moved if MPOL_MF_MOVE_ALL is specified.
-EPERM The page has been mlocked by a process/driver and
cannot be moved.
-EBUSY Page is busy and cannot be moved. Try again later.
-EFAULT Invalid address (no VMA or zero page).
-ENOMEM Unable to allocate memory on target node.
-EIO Unable to write back page. The page must be written
back in order to move it since the page is dirty and the
filesystem does not provide a migration function that
would allow the moving of dirty pages.
-EINVAL A dirty page cannot be moved. The filesystem does not provide
a migration function and has no ability to write back pages.
The flags parameter indicates what types of pages to move:
MPOL_MF_MOVE Move pages that are only mapped by the process.
MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
Requires sufficient capabilities.
Possible return codes from move_pages()
-ENOENT No pages found that would require moving. All pages
are either already on the target node, not present, had an
invalid address or could not be moved because they were
mapped by multiple processes.
-EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
to migrate pages in a kernel thread.
-EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges.
or an attempt to move a process belonging to another user.
-EACCES One of the target nodes is not allowed by the current cpuset.
-ENODEV One of the target nodes is not online.
-ESRCH Process does not exist.
-E2BIG Too many pages to move.
-ENOMEM Not enough memory to allocate control array.
-EFAULT Parameters could not be accessed.
A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3
From: Christoph Lameter <clameter@sgi.com>
Detailed results for sys_move_pages()
Pass a pointer to an integer to get_new_page() that may be used to
indicate where the completion status of a migration operation should be
placed. This allows sys_move_pags() to report back exactly what happened to
each page.
Wish there would be a better way to do this. Looks a bit hacky.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Instead of passing a list of new pages, pass a function to allocate a new
page. This allows the correct placement of MPOL_INTERLEAVE pages during page
migration. It also further simplifies the callers of migrate pages.
migrate_pages() becomes similar to migrate_pages_to() so drop
migrate_pages_to(). The batching of new page allocations becomes unnecessary.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Do not leave pages on the lists passed to migrate_pages(). Seems that we will
not need any postprocessing of pages. This will simplify the handling of
pages by the callers of migrate_pages().
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
gather_stats() is called with a spinlock held from check_pte_range. We
cannot reschedule with a lock held.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The hooks in the slab cache allocator code path for support of NUMA
mempolicies and cpuset memory spreading are in an important code path. Many
systems will use neither feature.
This patch optimizes those hooks down to a single check of some bits in the
current tasks task_struct flags. For non NUMA systems, this hook and related
code is already ifdef'd out.
The optimization is done by using another task flag, set if the task is using
a non-default NUMA mempolicy. Taking this flag bit along with the
PF_SPREAD_PAGE and PF_SPREAD_SLAB flag bits added earlier in this 'cpuset
memory spreading' patch set, one can check for the combination of any of these
special case memory placement mechanisms with a single test of the current
tasks task_struct flags.
This patch also tightens up the code, to save a few bytes of kernel text
space, and moves some of it out of line. Due to the nested inlines called
from multiple places, we were ending up with three copies of this code, which
once we get off the main code path (for local node allocation) seems a bit
wasteful of instruction memory.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Centralize the page migration functions in anticipation of additional
tinkering. Creates a new file mm/migrate.c
1. Extract buffer_migrate_page() from fs/buffer.c
2. Extract central migration code from vmscan.c
3. Extract some components from mempolicy.c
4. Export pageout() and remove_from_swap() from vmscan.c
5. Make it possible to configure NUMA systems without page migration
and non-NUMA systems with page migration.
I had to so some #ifdeffing in mempolicy.c that may need a cleanup.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We have struct kmem_cache now so use it instead of the old typedef.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently the migration of anonymous pages will silently fail if no swap is
setup. This patch makes page migration functions check for available swap
and fail with -ENODEV if no swap space is available.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It seems that setting scheduling policy and priorities is also the kind of
thing that might be performed in apps that also use the NUMA API, so it
would seem consistent to use CAP_SYS_NICE for NUMA also.
So use CAP_SYS_NICE for controlling migration permissions.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix the mm/mempolicy.c build for !CONFIG_HUGETLB_PAGE.
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Martin Bligh <mbligh@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change the format of numa_maps to be more compact and contain additional
information that is useful for managing and troubleshooting memory on a
NUMA system. Numa_maps can now also support huge pages.
Fixes:
1. More compact format. Only display fields if they contain additional
information.
2. Always display information for all vmas. The old numa_maps did not display
vma with no mapped entries. This was a bit confusing because page
migration removes ptes for file backed vmas. After page migration
a part of the vmas vanished.
3. Rename maxref to maxmap. This is the maximum mapcount of all the pages
in a vma and may be used as an indicator as to how many processes
may be using a certain vma.
4. Include the ability to scan over huge page vmas.
New items shown:
dirty
Number of pages in a vma that have either the dirty bit set in the
page_struct or in the pte.
file=<filename>
The file backing the pages if any
stack
Stack area
heap
Heap area
huge
Huge page area. The number of pages shows is the number of huge
pages not the regular sized pages.
swapcache
Number of pages with swap references. Must be >0 in order to
be shown.
active
Number of active pages. Only displayed if different from the number
of pages mapped.
writeback
Number of pages under writeback. Only displayed if >0.
Sample ouput of a process using huge pages:
00000000 default
2000000000000000 default file=/lib/ld-2.3.90.so mapped=13 mapmax=30 N0=13
2000000000044000 default file=/lib/ld-2.3.90.so anon=2 dirty=2 swapcache=2 N2=2
2000000000064000 default file=/lib/librt-2.3.90.so mapped=2 active=1 N1=1 N3=1
2000000000074000 default file=/lib/librt-2.3.90.so
2000000000080000 default file=/lib/librt-2.3.90.so anon=1 swapcache=1 N2=1
2000000000084000 default
2000000000088000 default file=/lib/libc-2.3.90.so mapped=52 mapmax=32 active=48 N0=52
20000000002bc000 default file=/lib/libc-2.3.90.so
20000000002c8000 default file=/lib/libc-2.3.90.so anon=3 dirty=2 swapcache=3 active=2 N1=1 N2=2
20000000002d4000 default anon=1 swapcache=1 N1=1
20000000002d8000 default file=/lib/libpthread-2.3.90.so mapped=8 mapmax=3 active=7 N2=2 N3=6
20000000002fc000 default file=/lib/libpthread-2.3.90.so
2000000000308000 default file=/lib/libpthread-2.3.90.so anon=1 dirty=1 swapcache=1 N1=1
200000000030c000 default anon=1 dirty=1 swapcache=1 N1=1
2000000000320000 default anon=1 dirty=1 N1=1
200000000071c000 default
2000000000720000 default anon=2 dirty=2 swapcache=1 N1=1 N2=1
2000000000f1c000 default
2000000000f20000 default anon=2 dirty=2 swapcache=1 active=1 N2=1 N3=1
200000000171c000 default
2000000001720000 default anon=1 dirty=1 swapcache=1 N1=1
2000000001b20000 default
2000000001b38000 default file=/lib/libgcc_s.so.1 mapped=2 N1=2
2000000001b48000 default file=/lib/libgcc_s.so.1
2000000001b54000 default file=/lib/libgcc_s.so.1 anon=1 dirty=1 active=0 N1=1
2000000001b58000 default file=/lib/libunwind.so.7.0.0 mapped=2 active=1 N1=2
2000000001b74000 default file=/lib/libunwind.so.7.0.0
2000000001b80000 default file=/lib/libunwind.so.7.0.0
2000000001b84000 default
4000000000000000 default file=/media/huge/test9 mapped=1 N1=1
6000000000000000 default file=/media/huge/test9 anon=1 dirty=1 active=0 N1=1
6000000000004000 default heap
607fffff7fffc000 default anon=1 dirty=1 swapcache=1 N2=1
607fffffff06c000 default stack anon=1 dirty=1 active=0 N1=1
8000000060000000 default file=/mnt/huge/test0 huge dirty=3 N1=3
8000000090000000 default file=/mnt/huge/test1 huge dirty=3 N0=1 N2=2
80000000c0000000 default file=/mnt/huge/test2 huge dirty=3 N1=1 N3=2
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
numa_maps should not scan over huge vmas in order not to cause problems for
non IA64 platforms that may have pte entries pointing to huge pages in a
variety of ways in their page tables. Add a simple check to ignore vmas
containing huge pages.
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently sys_migrate_pages only moves pages belonging to a process. This
is okay when invoked from a regular user. But if invoked from root it
should move all pages as documented in the migrate_pages manpage.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
migrate_pages_to() allocates a list of new pages on the intended target
node or with the intended policy and then uses the list of new pages as
targets for the migration of a list of pages out of place.
When the pages are allocated it is not clear which of the out of place
pages will be moved to the new pages. So we cannot specify an address as
needed by alloc_page_vma(). This causes problem for MPOL_INTERLEAVE which
will currently allocate the pages on the first node of the set. If mbind
is used with vma that has the policy of MPOL_INTERLEAVE then the
interleaving of pages may be destroyed.
This patch fixes that by generating a fake address for each alloc_page_vma
which will result is a distribution of pages as prescribed by
MPOL_INTERLEAVE.
Lee also noted that the sequence of nodes for the new pages seems to be
inverted. So we also invert the way the lists of pages for migration are
build.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Looks-ok-to: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
[akpm; it happens that the code was still correct, only inefficient ]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
maxnode is a bit index and can't be directly compared against a byte length
like PAGE_SIZE
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make sure maxnodes is safe size before calculating nlongs in
get_nodes().
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The memory allocator doesn't like empty zones (which have an
uninitialized freelist), so a x86-64 system with a node fully
in GFP_DMA32 only would crash on mbind.
Fix that up by putting all possible zones as fallback into the zonelist
and skipping the empty ones.
In fact the code always enough allocated space for all zones,
but only used it for the highest. This change just uses all the
memory that was allocated before.
This should work fine for now, but whoever implements node hot removal
needs to fix this somewhere else too (or make sure zone datastructures
by itself never go away, only their memory)
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
> mm/mempolicy.c: In function `huge_zonelist':
> mm/mempolicy.c:1045: error: `HPAGE_SHIFT' undeclared (first use in this function)
> mm/mempolicy.c:1045: error: (Each undeclared identifier is reported only once
> mm/mempolicy.c:1045: error: for each function it appears in.)
> make[1]: *** [mm/mempolicy.o] Error 1
Need to wrap huge_zonelist function with CONFIG_HUGETLBFS.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Modify policy layer to support direct page migration
- Add migrate_pages_to() allowing the migration of a list of pages to a a
specified node or to vma with a specific allocation policy in sets of
MIGRATE_CHUNK_SIZE pages
- Modify do_migrate_pages() to do a staged move of pages from the source
nodes to the target nodes.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Move the interrupt check from slab_node into ___cache_alloc and adds an
"unlikely()" to avoid pipeline stalls on some architectures.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch fixes a regression in 2.6.14 against 2.6.13 that causes an
imbalance in memory allocation during bootup.
The slab allocator in 2.6.13 is not numa aware and simply calls
alloc_pages(). This means that memory policies may control the behavior of
alloc_pages(). During bootup the memory policy is set to MPOL_INTERLEAVE
resulting in the spreading out of allocations during bootup over all
available nodes. The slab allocator in 2.6.13 has only a single list of
slab pages. As a result the per cpu slab cache and the spinlock controlled
page lists may contain slab entries from off node memory. The slab
allocator in 2.6.13 makes no effort to discern the locality of an entry on
its lists.
The NUMA aware slab allocator in 2.6.14 controls locality of the slab pages
explicitly by calling alloc_pages_node(). The NUMA slab allocator manages
slab entries by having lists of available slab pages for each node. The
per cpu slab cache can only contain slab entries associated with the node
local to the processor. This guarantees that the default allocation mode
of the slab allocator always assigns local memory if available.
Setting MPOL_INTERLEAVE as a default policy during bootup has no effect
anymore. In 2.6.14 all node unspecific slab allocations are performed on
the boot processor. This means that most of key data structures are
allocated on one node. Most processors will have to refer to these
structures making the boot node a potential bottleneck. This may reduce
performance and cause unnecessary memory pressure on the boot node.
This patch implements NUMA policies in the slab layer. There is the need
of explicit application of NUMA memory policies by the slab allcator itself
since the NUMA slab allocator does no longer let the page_allocator control
locality.
The check for policies is made directly at the beginning of __cache_alloc
using current->mempolicy. The memory policy is already frequently checked
by the page allocator (alloc_page_vma() and alloc_page_current()). So it
is highly likely that the cacheline is present. For MPOL_INTERLEAVE
kmalloc() will spread out each request to one node after another so that an
equal distribution of allocations can be obtained during bootup.
It is not possible to push the policy check to lower layers of the NUMA
slab allocator since the per cpu caches are now only containing slab
entries from the current node. If the policy says that the local node is
not to be preferred or forbidden then there is no point in checking the
slab cache or local list of slab pages. The allocation better be directed
immediately to the lists containing slab entries for the allowed set of
nodes.
This way of applying policy also fixes another strange behavior in 2.6.13.
alloc_pages() is controlled by the memory allocation policy of the current
process. It could therefore be that one process is running with
MPOL_INTERLEAVE and would f.e. obtain a new page following that policy
since no slab entries are in the lists anymore. A page can typically be
used for multiple slab entries but lets say that the current process is
only using one. The other entries are then added to the slab lists. These
are now non local entries in the slab lists despite of the possible
availability of local pages that would provide faster access and increase
the performance of the application.
Another process without MPOL_INTERLEAVE may now run and expect a local slab
entry from kmalloc(). However, there are still these free slab entries
from the off node page obtained from the other process via MPOL_INTERLEAVE
in the cache. The process will then get an off node slab entry although
other slab entries may be available that are local to that process. This
means that the policy if one process may contaminate the locality of the
slab caches for other processes.
This patch in effect insures that a per process policy is followed for the
allocation of slab entries and that there cannot be a memory policy
influence from one process to another. A process with default policy will
always get a local slab entry if one is available. And the process using
memory policies will get its memory arranged as requested. Off-node slab
allocation will require the use of spinlocks and will make the use of per
cpu caches not possible. A process using memory policies to redirect
allocations offnode will have to cope with additional lock overhead in
addition to the latency added by the need to access a remote slab entry.
Changes V1->V2
- Remove #ifdef CONFIG_NUMA by moving forward declaration into
prior #ifdef CONFIG_NUMA section.
- Give the function determining the node number to use a saner
name.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Simplify migrate_page_add after feedback from Hugh. This also allows us to
drop one parameter from migrate_page_add.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Migration code currently does not take a reference to target page
properly, so between unlocking the pte and trying to take a new
reference to the page with isolate_lru_page, anything could happen to
it.
Fix this by holding the pte lock until we get a chance to elevate the
refcount.
Other small cleanups while we're here.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Anything that writes into a tmpfs filesystem is liable to disproportionately
decrease the available memory on a particular node. Since there's no telling
what sort of application (e.g. dd/cp/cat) might be dropping large files
there, this lets the admin choose the appropriate default behavior for their
site's situation.
Introduce a tmpfs mount option which allows specifying a memory policy and
a second option to specify the nodelist for that policy. With the default
policy, tmpfs will behave as it does today. This patch adds support for
preferred, bind, and interleave policies.
The default policy will cause pages to be added to tmpfs files on the node
which is doing the writing. Some jobs expect a single process to create
and manage the tmpfs files. This results in a node which has a
significantly reduced number of free pages.
With this patch, the administrator can specify the policy and nodes for
that policy where they would prefer allocations.
This patch was originally written by Brent Casavant and Hugh Dickins. I
added support for the bind and preferred policies and the mpol_nodelist
mount option.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This ensures that reserved pages are not migrated. Reserved pages
currently cause the WARN_ON to trigger in migrate_page_add()
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix more of longstanding bug in cpuset/mempolicy interaction.
NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset
to just the Memory Nodes allowed by that cpuset. The kernel maintains
internal state for each mempolicy, tracking what nodes are used for the
MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies.
When a tasks cpuset memory placement changes, whether because the cpuset
changed, or because the task was attached to a different cpuset, then the
tasks mempolicies have to be rebound to the new cpuset placement, so as to
preserve the cpuset-relative numbering of the nodes in that policy.
An earlier fix handled such mempolicy rebinding for mempolicies attached to a
task.
This fix rebinds mempolicies attached to vma's (address ranges in a tasks
address space.) Due to the need to hold the task->mm->mmap_sem semaphore while
updating vma's, the rebinding of vma mempolicies has to be done when the
cpuset memory placement is changed, at which time mmap_sem can be safely
acquired. The tasks mempolicy is rebound later, when the task next attempts
to allocate memory and notices that its task->cpuset_mems_generation is
out-of-date with its cpusets mems_generation.
Because walking the tasklist to find all tasks attached to a changing cpuset
requires holding tasklist_lock, a spinlock, one cannot update the vma's of the
affected tasks while doing the tasklist scan. In general, one cannot acquire
a semaphore (which can sleep) while already holding a spinlock (such as
tasklist_lock). So a list of mm references has to be built up during the
tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem
acquired, and the vma's in that mm rebound.
Once the tasklist lock is dropped, affected tasks may fork new tasks, before
their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to
point to the cpuset being rebound (there can only be one; cpuset modifications
are done under a global 'manage_sem' semaphore), and the mpol_copy code that
is used to copy a tasks mempolicies during fork catches such forking tasks,
and ensures their children are also rebound.
When a task is moved to a different cpuset, it is easier, as there is only one
task involved. It's mm->vma's are scanned, using the same
mpol_rebind_policy() as used above.
It may happen that both the mpol_copy hook and the update done via the
tasklist scan update the same mm twice. This is ok, as the mempolicies of
each vma in an mm keep track of what mems_allowed they are relative to, and
safely no-op a second request to rebind to the same nodes.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
