summaryrefslogtreecommitdiff
path: root/mm/slab.c
AgeCommit message (Collapse)Author
2007-02-11[PATCH] optional ZONE_DMA: optional ZONE_DMA in the VMChristoph Lameter
Make ZONE_DMA optional in core code. - ifdef all code for ZONE_DMA and related definitions following the example for ZONE_DMA32 and ZONE_HIGHMEM. - Without ZONE_DMA, ZONE_HIGHMEM and ZONE_DMA32 we get to a ZONES_SHIFT of 0. - Modify the VM statistics to work correctly without a DMA zone. - Modify slab to not create DMA slabs if there is no ZONE_DMA. [akpm@osdl.org: cleanup] [jdike@addtoit.com: build fix] [apw@shadowen.org: Simplify calculation of the number of bits we need for ZONES_SHIFT] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] slab: use parameter passed to cache_reap to determine pointer to ↵Christoph Lameter
work structure Use the pointer passed to cache_reap to determine the work pointer and consolidate exit paths. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] slab: cache alloc cleanupsPekka Enberg
Clean up __cache_alloc and __cache_alloc_node functions a bit. We no longer need to do NUMA_BUILD tricks and the UMA allocation path is much simpler. No functional changes in this patch. Note: saves few kernel text bytes on x86 NUMA build due to using gotos in __cache_alloc_node() and moving __GFP_THISNODE check in to fallback_alloc(). Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Manfred Spraul <manfred@colorfullife.com> Acked-by: Christoph Lameter <christoph@lameter.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] slab: remove broken PageSlab check from kfree_debugcheckPekka Enberg
The PageSlab debug check in kfree_debugcheck() is broken for compound pages. It is also redundant as we already do BUG_ON for non-slab pages in page_get_cache() and page_get_slab() which are always called before we free any actual objects. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-06[PATCH] fix BUG_ON(!PageSlab) from fallback_allocHugh Dickins
pdflush hit the BUG_ON(!PageSlab(page)) in kmem_freepages called from fallback_alloc: cache_grow already freed those pages when alloc_slabmgmt failed. But it wouldn't have freed them if __GFP_NO_GROW, so make sure fallback_alloc doesn't waste its time on that case. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Pekka J Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22[PATCH] fix kernel-doc warnings in 2.6.20-rc1Randy Dunlap
Fix kernel-doc warnings in 2.6.20-rc1. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22[PATCH] slab: fix kmem_ptr_validate definitionChristoph Lameter
The declaration of kmem_ptr_validate in slab.h does not match the one in slab.c. Remove the fastcall attribute (this is the only use in slab.c). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] SLAB: use a multiply instead of a divide in obj_to_index()Eric Dumazet
When some objects are allocated by one CPU but freed by another CPU we can consume lot of cycles doing divides in obj_to_index(). (Typical load on a dual processor machine where network interrupts are handled by one particular CPU (allocating skbufs), and the other CPU is running the application (consuming and freeing skbufs)) Here on one production server (dual-core AMD Opteron 285), I noticed this divide took 1.20 % of CPU_CLK_UNHALTED events in kernel. But Opteron are quite modern cpus and the divide is much more expensive on oldest architectures : On a 200 MHz sparcv9 machine, the division takes 64 cycles instead of 1 cycle for a multiply. Doing some math, we can use a reciprocal multiplication instead of a divide. If we want to compute V = (A / B) (A and B being u32 quantities) we can instead use : V = ((u64)A * RECIPROCAL(B)) >> 32 ; where RECIPROCAL(B) is precalculated to ((1LL << 32) + (B - 1)) / B Note : I wrote pure C code for clarity. gcc output for i386 is not optimal but acceptable : mull 0x14(%ebx) mov %edx,%eax // part of the >> 32 xor %edx,%edx // useless mov %eax,(%esp) // could be avoided mov %edx,0x4(%esp) // useless mov (%esp),%ebx [akpm@osdl.org: small cleanups] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] cpuset: rework cpuset_zone_allowed apiPaul Jackson
Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] More slab.h cleanupsChristoph Lameter
More cleanups for slab.h 1. Remove tabs from weird locations as suggested by Pekka 2. Drop the check for NUMA and SLAB_DEBUG from the fallback section as suggested by Pekka. 3. Uses static inline for the fallback defs as also suggested by Pekka. 4. Make kmem_ptr_valid take a const * argument. 5. Separate the NUMA fallback definitions from the kmalloc_track fallback definitions. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] slab: fix sleeping in atomic bugChristoph Lameter
Fallback_alloc() does not do the check for GFP_WAIT as done in cache_grow(). Thus interrupts are disabled when we call kmem_getpages() which results in the failure. Duplicate the handling of GFP_WAIT in cache_grow(). Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] user of the jiffies rounding patch: SlabArjan van de Ven
This patch introduces users of the round_jiffies() function in the slab code. The slab code has a few "run every second" timers for background work; these are obviously not timing critical as long as they happen roughly at the right frequency. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] fault-injection: defaults likely to please a new userDon Mullis
Assign defaults most likely to please a new user: 1) generate some logging output (verbose=2) 2) avoid injecting failures likely to lock up UI (ignore_gfp_wait=1, ignore_gfp_highmem=1) Signed-off-by: Don Mullis <dwm@meer.net> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] fault-injection capability for kmallocAkinobu Mita
This patch provides fault-injection capability for kmalloc. Boot option: failslab=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/failslab/interval /debug/failslab/probability /debug/failslab/specifies /debug/failslab/times /debug/failslab/ignore-gfp-highmem /debug/failslab/ignore-gfp-wait Example: failslab=10,100,0,-1 slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] mm: fallback_alloc cpuset_zone_allowed irq fixPaul Jackson
fallback_alloc() could end up calling cpuset_zone_allowed() with interrupts disabled (by code in kmem_cache_alloc_node()), but without __GFP_HARDWALL set, leading to a possible call of a sleeping function with interrupts disabled. This results in the BUG report: BUG: sleeping function called from invalid context at kernel/cpuset.c:1520 in_atomic():0, irqs_disabled():1 Thanks to Paul Menage for catching this one. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] struct seq_operations and struct file_operations constificationHelge Deller
- move some file_operations structs into the .rodata section - move static strings from policy_types[] array into the .rodata section - fix generic seq_operations usages, so that those structs may be defined as "const" as well [akpm@osdl.org: couple of fixes] Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: use probe_kernel_address()Andrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: better fallback allocation behaviorChristoph Lameter
Currently we simply attempt to allocate from all allowed nodes using GFP_THISNODE. However, GFP_THISNODE does not do reclaim (it wont do any at all if the recent GFP_THISNODE patch is accepted). If we truly run out of memory in the whole system then fallback_alloc may return NULL although memory may still be available if we would perform more thorough reclaim. This patch changes fallback_alloc() so that we first only inspect all the per node queues for available slabs. If we find any then we allocate from those. This avoids slab fragmentation by first getting rid of all partial allocated slabs on every node before allocating new memory. If we cannot satisfy the allocation from any per node queue then we extend a slab. We now call into the page allocator without specifying GFP_THISNODE. The page allocator will then implement its own fallback (in the given cpuset context), perform necessary reclaim (again considering not a single node but the whole set of allowed nodes) and then return pages for a new slab. We identify from which node the pages were allocated and then insert the pages into the corresponding per node structure. In order to do so we need to modify cache_grow() to take a parameter that specifies the new slab. kmem_getpages() can no longer set the GFP_THISNODE flag since we need to be able to use kmem_getpage to allocate from an arbitrary node. GFP_THISNODE needs to be specified when calling cache_grow(). One key advantage is that the decision from which node to allocate new memory is removed from slab fallback processing. The patch allows to go back to use of the page allocators fallback/reclaim logic. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: fix two issues in kmalloc_node / __cache_alloc_nodeChristoph Lameter
This addresses two issues: 1. Kmalloc_node() may intermittently return NULL if we are allocating from the current node and are unable to obtain memory for the current node from the page allocator. This is because we call ___cache_alloc() if nodeid == numa_node_id() and ____cache_alloc is not able to fallback to other nodes. This was introduced in the 2.6.19 development cycle. <= 2.6.18 in that case does not do a restricted allocation and blindly trusts the page allocator to have given us memory from the indicated node. It inserts the page regardless of the node it came from into the queues for the current node. 2. If kmalloc_node() is used on a node that has not been bootstrapped yet then we may try to pass an invalid node number to ____cache_alloc_node() triggering a BUG(). Change the function to call fallback_alloc() instead. Only call fallback_alloc() if we are allowed to fallback at all. The need to handle a node not bootstrapped yet also first surfaced in the 2.6.19 cycle. Update the comments since they were still describing the old kmalloc_node from 2.6.12. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_DMAChristoph Lameter
SLAB_DMA is an alias of GFP_DMA. This is the last one so we remove the leftover comment too. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_LEVEL_MASKChristoph Lameter
SLAB_LEVEL_MASK is only used internally to the slab and is and alias of GFP_LEVEL_MASK. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_NO_GROWChristoph Lameter
It is only used internally in the slab. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] leak tracking for kmalloc_nodeChristoph Hellwig
We have variants of kmalloc and kmem_cache_alloc that leave leak tracking to the caller. This is used for subsystem-specific allocators like skb_alloc. To make skb_alloc node-aware we need similar routines for the node-aware slab allocator, which this patch adds. Note that the code is rather ugly, but it mirrors the non-node-aware code 1:1: [akpm@osdl.org: add module export] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] mm: add noaliencache boot option to disable numa alien cachesPaul Menage
When using numa=fake on non-NUMA hardware there is no benefit to having the alien caches, and they consume much memory. Add a kernel boot option to disable them. Christoph sayeth "This is good to have even on large NUMA. The problem is that the alien caches grow by the square of the size of the system in terms of nodes." Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] mm: slab: eliminate lock_cpu_hotplug from slabRavikiran G Thirumalai
Here's an attempt towards doing away with lock_cpu_hotplug in the slab subsystem. This approach also fixes a bug which shows up when cpus are being offlined/onlined and slab caches are being tuned simultaneously. http://marc.theaimsgroup.com/?l=linux-kernel&m=116098888100481&w=2 The patch has been stress tested overnight on a 2 socket 4 core AMD box with repeated cpu online and offline, while dbench and kernbench process are running, and slab caches being tuned at the same time. There were no lockdep warnings either. (This test on 2,6.18 as 2.6.19-rc crashes at __drain_pages http://marc.theaimsgroup.com/?l=linux-kernel&m=116172164217678&w=2 ) The approach here is to hold cache_chain_mutex from CPU_UP_PREPARE until CPU_ONLINE (similar in approach as worqueue_mutex) . Slab code sensitive to cpu_online_map (kmem_cache_create, kmem_cache_destroy, slabinfo_write, __cache_shrink) is already serialized with cache_chain_mutex. (This patch lengthens cache_chain_mutex hold time at kmem_cache_destroy to cover this). This patch also takes the cache_chain_sem at kmem_cache_shrink to protect sanity of cpu_online_map at __cache_shrink, as viewed by slab. (kmem_cache_shrink->__cache_shrink->drain_cpu_caches). But, really, kmem_cache_shrink is used at just one place in the acpi subsystem! Do we really need to keep kmem_cache_shrink at all? Another note. Looks like a cpu hotplug event can send CPU_UP_CANCELED to a registered subsystem even if the subsystem did not receive CPU_UP_PREPARE. This could be due to a subsystem registered for notification earlier than the current subsystem crapping out with NOTIFY_BAD. Badness can occur with in the CPU_UP_CANCELED code path at slab if this happens (The same would apply for workqueue.c as well). To overcome this, we might have to use either a) a per subsystem flag and avoid handling of CPU_UP_CANCELED, or b) Use a special notifier events like LOCK_ACQUIRE/RELEASE as Gautham was using in his experiments, or c) Do not send CPU_UP_CANCELED to a subsystem which did not receive CPU_UP_PREPARE. I would prefer c). Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab debug and ARCH_SLAB_MINALIGN don't get alongKevin Hilman
When CONFIG_SLAB_DEBUG is used in combination with ARCH_SLAB_MINALIGN, some debug flags should be disabled which depend on BYTES_PER_WORD alignment. The disabling of these debug flags is not properly handled when BYTES_PER_WORD < ARCH_SLAB_MEMALIGN < cache_line_size() This patch fixes that and also adds an alignment check to cache_alloc_debugcheck_after() when ARCH_SLAB_MINALIGN is used. Signed-off-by: Kevin Hilman <khilman@mvista.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-22WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells
Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22WorkStruct: Separate delayable and non-delayable events.David Howells
Separate delayable work items from non-delayable work items be splitting them into a separate structure (delayed_work), which incorporates a work_struct and the timer_list removed from work_struct. The work_struct struct is huge, and this limits it's usefulness. On a 64-bit architecture it's nearly 100 bytes in size. This reduces that by half for the non-delayable type of event. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-03[PATCH] init_reap_node() initialization fixDaniel Yeisley
It looks like there is a bug in init_reap_node() in slab.c that can cause multiple oops's on certain ES7000 configurations. The variable reap_node is defined per cpu, but only initialized on a single CPU. This causes an oops in next_reap_node() when __get_cpu_var(reap_node) returns the wrong value. Fix is below. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Christoph Lameter <clameter@engr.sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21[PATCH] Slab: Do not fallback to nodes that have not been bootstrapped yetChristoph Lameter
The zonelist may contain zones of nodes that have not been bootstrapped and we will oops if we try to allocate from those zones. So check if the node information for the slab and the node have been setup before attempting an allocation. If it has not been setup then skip that zone. Usually we will not encounter this situation since the slab bootstrap code avoids falling back before we have setup the respective nodes but we seem to have a special needs for pppc. Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-07[PATCH] slab: remove wrongly placed BUG_ONChristoph Lameter
Init list is called with a list parameter that is not equal to the cachep->nodelists entry under NUMA if more than one node exists. This is fully legitimatei. One may want to populate the list fields before switching nodelist pointers. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] slab: reduce numa text sizePekka Enberg
Reduce the NUMA text size of mm/slab.o a little on x86 by using a local variable to store the result of numa_node_id(). text data bss dec hex filename 16858 2584 16 19458 4c02 mm/slab.o (before) 16804 2584 16 19404 4bcc mm/slab.o (after) [akpm@osdl.org: use better names] [pbadari@us.ibm.com: fix that] Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/confighLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh: Remove all inclusions of <linux/config.h> Manually resolved trivial path conflicts due to removed files in the sound/oss/ subdirectory.
2006-10-04[PATCH] slab: clean up leak tracking ifdefs a little bitChristoph Hellwig
- rename ____kmalloc to kmalloc_track_caller so that people have a chance to guess what it does just from it's name. Add a comment describing it for those who don't. Also move it after kmalloc in slab.h so people get less confused when they are just looking for kmalloc - move things around in slab.c a little to reduce the ifdef mess. [penberg@cs.helsinki.fi: Fix up reversed #ifdef] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-09-29[PATCH] single bit flip detectorDave Jones
In cases where we detect a single bit has been flipped, we spew the usual slab corruption message, which users instantly think is a kernel bug. In a lot of cases, single bit errors are down to bad memory, or other hardware failure. This patch adds an extra line to the slab debug messages in those cases, in the hope that users will try memtest before they report a bug. 000: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Single bit error detected. Possibly bad RAM. Run memtest86. [akpm@osdl.org: cleanups] Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] GFP_THISNODE for the slab allocatorChristoph Lameter
This patch insures that the slab node lists in the NUMA case only contain slabs that belong to that specific node. All slab allocations use GFP_THISNODE when calling into the page allocator. If an allocation fails then we fall back in the slab allocator according to the zonelists appropriate for a certain context. This allows a replication of the behavior of alloc_pages and alloc_pages node in the slab layer. Currently allocations requested from the page allocator may be redirected via cpusets to other nodes. This results in remote pages on nodelists and that in turn results in interrupt latency issues during cache draining. Plus the slab is handing out memory as local when it is really remote. Fallback for slab memory allocations will occur within the slab allocator and not in the page allocator. This is necessary in order to be able to use the existing pools of objects on the nodes that we fall back to before adding more pages to a slab. The fallback function insures that the nodes we fall back to obey cpuset restrictions of the current context. We do not allocate objects from outside of the current cpuset context like before. Note that the implementation of locality constraints within the slab allocator requires importing logic from the page allocator. This is a mischmash that is not that great. Other allocators (uncached allocator, vmalloc, huge pages) face similar problems and have similar minimal reimplementations of the basic fallback logic of the page allocator. There is another way of implementing a slab by avoiding per node lists (see modular slab) but this wont work within the existing slab. V1->V2: - Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA - Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another #ifdef [akpm@osdl.org: build fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] slab: fix kmalloc_node applying memory policies if nodeid == ↵Christoph Lameter
numa_node_id() kmalloc_node() falls back to ___cache_alloc() under certain conditions and at that point memory policies may be applied redirecting the allocation away from the current node. Therefore kmalloc_node(...,numa_node_id()) or kmalloc_node(...,-1) may not return memory from the local node. Fix this by doing the policy check in __cache_alloc() instead of ____cache_alloc(). This version here is a cleanup of Kiran's patch. - Tested on ia64. - Extra material removed. - Consolidate the exit path if alternate_node_alloc() returned an object. [akpm@osdl.org: warning fix] Signed-off-by: Alok N Kataria <alok.kataria@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] Make kmem_cache_destroy() return voidAlexey Dobriyan
un-, de-, -free, -destroy, -exit, etc functions should in general return void. Also, There is very little, say, filesystem driver code can do upon failed kmem_cache_destroy(). If it will be decided to BUG in this case, BUG should be put in generic code, instead. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] ZVC: Support NR_SLAB_RECLAIMABLE / NR_SLAB_UNRECLAIMABLEChristoph Lameter
Remove the atomic counter for slab_reclaim_pages and replace the counter and NR_SLAB with two ZVC counter that account for unreclaimable and reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE. Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE. The intend seems to be to check for slab pages that could be freed. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Extract the allocpercpu functions from the slab allocatorChristoph Lameter
The allocpercpu functions __alloc_percpu and __free_percpu() are heavily using the slab allocator. However, they are conceptually slab. This also simplifies SLOB (at this point slob may be broken in mm. This should fix it). Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] fix potential stack overflow in mm/slab.cSiddha, Suresh B
On High end systems (1024 or so cpus) this can potentially cause stack overflow. Fix the stack usage. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] slab: fix lockdep warningsRavikiran G Thirumalai
Place the alien array cache locks of on slab malloc slab caches on a seperate lockdep class. This avoids false positives from lockdep [akpm@osdl.org: build fix] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] slab: do not panic when alloc_kmemlist fails and slab is upChristoph Lameter
It is fairly easy to get a system to oops by simply sizing a cache via /proc in such a way that one of the chaches (shared is easiest) becomes bigger than the maximum allowed slab allocation size. This occurs because enable_cpucache() fails if it cannot reallocate some caches. However, enable_cpucache() is used for multiple purposes: resizing caches, cache creation and bootstrap. If the slab is already up then we already have working caches. The resize can fail without a problem. We just need to return the proper error code. F.e. after this patch: # echo "size-64 10000 50 1000" >/proc/slabinfo -bash: echo: write error: Cannot allocate memory notice no OOPS. If we are doing a kmem_cache_create() then we also should not panic but return -ENOMEM. If on the other hand we do not have a fully bootstrapped slab allocator yet then we should indeed panic since we are unable to bring up the slab to its full functionality. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] slab: extract __kmem_cache_destroy from kmem_cache_destroyChristoph Lameter
The ability to free memory allocated to a slab cache is also useful if an error occurs during setup of a slab. So extract the function. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] slab: optimize kmalloc_node the same way as kmallocChristoph Hellwig
[akpm@osdl.org: export fix] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Add some comments to slab.cRavikiran G Thirumalai
Also, checks if we get a valid slabp_cache for off slab slab-descriptors. We should always get this. If we don't, then in that case we, will have to disable off-slab descriptors for this cache and do the calculations again. This is a rare case, so add a BUG_ON, for now, just in case. Signed-off-by: Alok N Kataria <alok.kataria@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] slab: respect architecture and caller mandated alignmentPekka Enberg
As explained by Heiko, on s390 (32-bit) ARCH_KMALLOC_MINALIGN is set to eight because their common I/O layer allocates data structures that need to have an eight byte alignment. This does not work when CONFIG_SLAB_DEBUG is enabled because kmem_cache_create will override alignment to BYTES_PER_WORD which is four. So change kmem_cache_create to ensure cache alignment is always at minimum what the architecture or caller mandates even if slab debugging is enabled. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] CPU hotplug compatible alloc_percpu()Martin Peschke
This patch splits alloc_percpu() up into two phases. Likewise for free_percpu(). This allows clients to limit initial allocations to online cpu's, and to populate or depopulate per-cpu data at run time as needed: struct my_struct *obj; /* initial allocation for online cpu's */ obj = percpu_alloc(sizeof(struct my_struct), GFP_KERNEL); ... /* populate per-cpu data for cpu coming online */ ptr = percpu_populate(obj, sizeof(struct my_struct), GFP_KERNEL, cpu); ... /* access per-cpu object */ ptr = percpu_ptr(obj, smp_processor_id()); ... /* depopulate per-cpu data for cpu going offline */ percpu_depopulate(obj, cpu); ... /* final removal */ percpu_free(obj); Signed-off-by: Martin Peschke <mp3@de.ibm.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>