summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2011-11-07Bluetooth: Revert: Fix L2CAP connection establishmentArek Lichwa
This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31net: Fix files explicitly needing to include module.hPaul Gortmaker
With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Bluetooth: Set HCI_MGMT flag only in read_controller_infoJohan Hedberg
The HCI_MGMT flag should only be set when user space requests the full controller information. This way we avoid potential issues with setting change events ariving before the actual read_controller_info command finishes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-31Bluetooth: Increase HCI reset timeout in hci_dev_do_closeSzymon Janc
I've noticed that my CSR usb dongle was not working if it was plugged in when PC was booting. It looks like I get two HCI reset command complete events (see hcidump logs below). The root cause is reset called from off_timer. Timeout for this reset to complete is set to 250ms and my bt dongle requires more time for replying with command complete event. After that, chip seems to reply with reset command complete event for next non-reset command. Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is already used for timeouting hci_reset_req in hci_dev_reset(). This might also be related to BT not working after suspend that was reported here some time ago. Hcidump log: 2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0 2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000 3) plen 0 2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00 01) plen 0 2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 1.1 (0x1) HCI Revision: 0x36f LMP Version: 1.1 (0x1) LMP Subversion: 0x36f Manufacturer: Cambridge Silicon Radio (10) Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-19bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Bluetooth: EFS: parse L2CAP config requestAndrei Emeltchenko
Add parsing Extended Flow Specification option in L2CAP Config Request Based upon haijun.liu <haijun.liu@atheros.com> series of patches (sent Sun, 22 Aug 2010) Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17Bluetooth: EWS: fix max_pdu calculationAndrei Emeltchenko
Fix max_pdu_size calculationin for RFC. Change magic number to human readable defines. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17Bluetooth: EWS: remove magic numbers in l2capAndrei Emeltchenko
Remove magic numbers for FCS, SDU LEN and PSM LEN when calculating packet payload. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17Bluetooth: EWS: support extended seq numbersAndrei Emeltchenko
Adds support for extended sequence numbers found in extended control fields. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17Bluetooth: EWS: handling different Control fieldsAndrei Emeltchenko
There are three different Control Field formats: the Standard Control Field, the Enhanced Control Field, and the Extended Control Field. Patch adds function to handle all those fields seamlessly. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-15Bluetooth: Fix missing cmd_status in mgmtGustavo F. Padovan
set_service_cache() was missing a cmd_status for the error case. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: Use list_for_each_entry() in mgmtGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: Add missing cmd_status() in mgmtGustavo F. Padovan
Improve error handling in mgmt load_keys() Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: return proper error if sock_queue_rcv_skb() failsGustavo F. Padovan
Improve error handling at cmd_status() and cmd_complete() Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: Forward errors from hci_register_devDavid Herrmann
We need to catch errors when calling hci_add_sysfs() and return them to the caller to avoid kernel oopses on device_add() failure. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: Rename sysfs un/register to add/delDavid Herrmann
As we introduced hci_init_sysfs() we should also rename hci_register_sysfs() and hci_unregister_sysfs() to hci_add_sysfs() and hci_del_sysfs() like we do with hci_conn_add/del_sysfs(). It looks more consistent now. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: Fix hci core device initializationDavid Herrmann
We must not call device_del() if we didn't use device_add(). See module.c for comments on that. Therefore, we need to call device_initialize() when allocating the hci device and later device_add() instead of device_register(). This also fixes a bug when hci_register_dev() failed and we call hci_free_dev() without a valid core device. hci_free_dev() segfaults while calling put_device() on invalid memory. We already do this with hci_conn connections (hci_conn_init_sysfs()) so they do not need to be fixed. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-14Bluetooth: rfcomm: Fix sleep in invalid context in rfcomm_security_cfmSzymon Janc
This was triggered by turning off encryption on ACL link when rfcomm was using high security. rfcomm_security_cfm (which is called from rx task) was closing DLC and this involves sending disconnect message (and locking socket). Move closing DLC to rfcomm_process_dlcs and only flag DLC for closure in rfcomm_security_cfm. BUG: sleeping function called from invalid context at net/core/sock.c:2032 in_atomic(): 1, irqs_disabled(): 0, pid: 1788, name: kworker/0:3 [<c0068a08>] (unwind_backtrace+0x0/0x108) from [<c05e25dc>] (dump_stack+0x20/0x24) [<c05e25dc>] (dump_stack+0x20/0x24) from [<c0087ba8>] (__might_sleep+0x110/0x12c) [<c0087ba8>] (__might_sleep+0x110/0x12c) from [<c04801d8>] (lock_sock_nested+0x2c/0x64) [<c04801d8>] (lock_sock_nested+0x2c/0x64) from [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) from [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) from [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) from [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) from [<c056b168>] (rfcomm_send_disc+0x78/0x80) [<c056b168>] (rfcomm_send_disc+0x78/0x80) from [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) from [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) from [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) from [<c0550380>] (hci_rx_task+0x1d0/0x2d0) [<c0550380>] (hci_rx_task+0x1d0/0x2d0) from [<c009ee04>] (tasklet_action+0x138/0x1e4) [<c009ee04>] (tasklet_action+0x138/0x1e4) from [<c009f21c>] (__do_softirq+0xcc/0x274) [<c009f21c>] (__do_softirq+0xcc/0x274) from [<c009f6c0>] (do_softirq+0x60/0x6c) [<c009f6c0>] (do_softirq+0x60/0x6c) from [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) from [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040d470>] (data_from_chip+0xf4/0xaec) [<c040d470>] (data_from_chip+0xf4/0xaec) from [<c04136c0>] (send_skb_to_core+0x40/0x178) [<c04136c0>] (send_skb_to_core+0x40/0x178) from [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) from [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) from [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) from [<c00b2774>] (process_one_work+0x144/0x4b8) [<c00b2774>] (process_one_work+0x144/0x4b8) from [<c00b2e8c>] (worker_thread+0x198/0x468) [<c00b2e8c>] (worker_thread+0x198/0x468) from [<c00b9bc8>] (kthread+0x98/0xa0) [<c00b9bc8>] (kthread+0x98/0xa0) from [<c0061744>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: AMP: read local amp info HCI commandAndrei Emeltchenko
Implementation of Read Local AMP Info Command Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EFS: add efs option in L2CAP conf reqAndrei Emeltchenko
Add Extended Flow Specification option when building L2CAP Configuration Request. EFS is added if both the local and remote L2CAP entities have indicated support for the Extended Flow Specification for BR/EDR. ... < ACL data: handle 1 flags 0x00 dlen 10 L2CAP(s): Info req: type 2 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x01f8 Enhanced Retransmission mode Streaming mode FCS Option Extended Flow Specification Fixed Channels Extended Window Size ... < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) ... Based upon haijun.liu <haijun.liu@atheros.com> series of patches (sent Sun, 22 Aug 2010) Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EFS: assign default values in chan addAndrei Emeltchenko
Assign default EFS values when creating L2CAP channel Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: recalculate L2CAP header sizeAndrei Emeltchenko
Recalculate length of L2CAP header based on Control field length. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite handling POLL (P) bitAndrei Emeltchenko
Handle POLL (P) bit in L2CAP ERTM using information about control field type. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite handling FINAL (F) bitAndrei Emeltchenko
Handle final (F) bit in L2CAP using information about control field type. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite check frame type functionAndrei Emeltchenko
Check frame function uses now information about control field type. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite L2CAP ERTM txseq calculationAndrei Emeltchenko
L2CAP ERTM txseq calculation uses now information about control field type. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite reqseq calculationAndrei Emeltchenko
reqseq calculation uses now information about control field type. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite handling SAR bitsAndrei Emeltchenko
Segmentation and Reassembly (SAR) occupies different windows in standard and extended control fields. Convert hardcoded masks to relative ones and use shift to access SAR bits. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: rewrite handling Supervisory (S) bitsAndrei Emeltchenko
Supervisory bits occupy different windows in standard / extended control fields. Convert hardcoded masks to relative ones and use shift to access S-bit window. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-13Bluetooth: EWS: extended window size option supportAndrei Emeltchenko
Adds support for extended window size (EWS) config option. We enable EWS feature in L2CAP Info RSP when hs enabled. EWS option is included in L2CAP Config Req if tx_win (which is set via socket) bigger then standard default value (63) && hs enabled && remote side supports EWS feature. Using EWS selects extended control field in L2CAP. Code partly based on Qualcomm and Atheros patches sent upstream a year ago. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: Documentation/feature-removal-schedule.txt
2011-10-11Bluetooth: Fix permission of enable_le paramGustavo F. Padovan
With 0444 it is impossible to change the param, changing it to 0644. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert role_switch variable to flag in l2cap chanAndrei Emeltchenko
role_switch variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert force_active variable to flag in l2cap chanAndrei Emeltchenko
force_active variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert force_reliable variable to flag in l2cap chanAndrei Emeltchenko
force_reliable variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert flushable variable to flag in l2cap chanAndrei Emeltchenko
flushable variable inside l2cap_chan is a logical one and can be easily converted to flag. Added flags in l2cap_chan structure. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Rename hidp_find_connection()Gustavo F. Padovan
hidp_get_connection() makes more sense because we hold a reference to the connection inside this function. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Delay session allocation in hidpGustavo F. Padovan
It gets allocated only when it is really needed. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: hidp: safely acquire hci connectionPeter Hurley
Claim device lock to safely enumerate hci connection list and bump hci connection proxy device ref count simultaneously. This patch incorporates David Herrmann's fix to prevent adding an HID device when the hci connection no longer exists. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Uses test_and_clear_bit() when possibleGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Remove wrong error checkGustavo F. Padovan
d458a9dfc add this check, but now it proves to be wrong. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Fix input device registrationGustavo F. Padovan
This is a regression fix. It made impossible use input device when hid fails. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Trasmit interrupt channel messages firstGustavo F. Padovan
interrupt channel is low latency. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: prioritize the interrupt channel in hidpGustavo F. Padovan
Interrupt channel has low latency requiments, should be processed first. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: use list_for_each_entry() in hidpGustavo F. Padovan
list_for_each_entry is much more meaningful. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: hidp: Stop I/O on shutdownDavid Herrmann
Current hidp driver purges the in/out queue on HID shutdown, but does not prevent further I/O. If a driver uses hidp_output_raw_report or hidp_get_raw_report during shutdown, the driver hangs for 5 or 10 seconds per call until it gets a timeout. That is, if the output queue of an HID driver has 10 messages pending, it will take 50s until hid_destroy_device() will return. The hidp_session_sem semaphore is held during shutdown so no other HID device may be added/removed during this time. This patch makes hidp_output_raw_report and hidp_get_raw_report fail if session->terminate is true. Also hidp_session will wakeup all current calls to these functions to cancel the current operations. We already purge the current I/O queues on hidp_stop(), so this data loss does not change the behaviour of the HID drivers. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: EFS: add enable_hs kernel paramAndrei Emeltchenko
Add enable_hs kernel parameter. L2CAP_FEAT_EXT_FLOW depends on it. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v0.10.2 at 2024-11-05 23:55:35 (GMT)