summaryrefslogtreecommitdiff
path: root/net/ipv4/devinet.c
AgeCommit message (Collapse)Author
2010-02-16net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman
Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16net ipv4: Decouple ipv4 interface parameters from binary sysctl numbersEric W. Biederman
Stop using the binary sysctl enumeartion in sysctl.h as an index into a per interface array. This leads to unnecessary binary sysctl number allocation, and a fragility in data structure and implementation because of unnecessary coupling. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
2010-01-07net: RFC3069, private VLAN proxy arp supportJesper Dangaard Brouer
This is to be used together with switch technologies, like RFC3069, that where the individual ports are not allowed to communicate with each other, but they are allowed to talk to the upstream router. As described in RFC 3069, it is possible to allow these hosts to communicate through the upstream router by proxy_arp'ing. This patch basically allow proxy arp replies back to the same interface (from which the ARP request/solicitation was received). Tunable per device via proc "proxy_arp_pvlan": /proc/sys/net/ipv4/conf/*/proxy_arp_pvlan This switch technology is known by different vendor names: - In RFC 3069 it is called VLAN Aggregation. - Cisco and Allied Telesyn call it Private VLAN. - Hewlett-Packard call it Source-Port filtering or port-isolation. - Ericsson call it MAC-Forced Forwarding (RFC Draft). Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-26net: restore ip source validationJamal Hadi Salim
when using policy routing and the skb mark: there are cases where a back path validation requires us to use a different routing table for src ip validation than the one used for mapping ingress dst ip. One such a case is transparent proxying where we pretend to be the destination system and therefore the local table is used for incoming packets but possibly a main table would be used on outbound. Make the default behavior to allow the above and if users need to turn on the symmetry via sysctl src_valid_mark Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits) mac80211: fix reorder buffer release iwmc3200wifi: Enable wimax core through module parameter iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter iwmc3200wifi: Coex table command does not expect a response iwmc3200wifi: Update wiwi priority table iwlwifi: driver version track kernel version iwlwifi: indicate uCode type when fail dump error/event log iwl3945: remove duplicated event logging code b43: fix two warnings ipw2100: fix rebooting hang with driver loaded cfg80211: indent regulatory messages with spaces iwmc3200wifi: fix NULL pointer dereference in pmkid update mac80211: Fix TX status reporting for injected data frames ath9k: enable 2GHz band only if the device supports it airo: Fix integer overflow warning rt2x00: Fix padding bug on L2PAD devices. WE: Fix set events not propagated b43legacy: avoid PPC fault during resume b43: avoid PPC fault during resume tcp: fix a timewait refcnt race ... Fix up conflicts due to sysctl cleanups (dead sysctl_check code and CTL_UNNUMBERED removed) in kernel/sysctl_check.c net/ipv4/sysctl_net_ipv4.c net/ipv6/addrconf.c net/sctp/sysctl.c
2009-12-03ipv4 05/05: add sysctl to accept packets with local source addressesPatrick McHardy
commit 8ec1e0ebe26087bfc5c0394ada5feb5758014fc8 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:16:35 2009 +0100 ipv4: add sysctl to accept packets with local source addresses Change fib_validate_source() to accept packets with a local source address when the "accept_local" sysctl is set for the incoming inet device. Combined with the previous patches, this allows to communicate between multiple local interfaces over the wire. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25net: use net_eq to compare netsOctavian Purdila
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-14ipv4: speedup inet_dump_ifaddr()Eric Dumazet
Stephen Hemminger a écrit : > On Thu, 12 Nov 2009 15:11:36 +0100 > Eric Dumazet <eric.dumazet@gmail.com> wrote: > >> When handling large number of netdevices, inet_dump_ifaddr() >> is very slow because it has O(N^2) complexity. >> >> Instead of scanning one single list, we can use the NETDEV_HASHENTRIES >> sub lists of the dev_index hash table, and RCU lookups. >> >> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> > > You might be able to make RCU critical section smaller by moving > it into loop. > Indeed. But we dump at most one skb (<= 8192 bytes ?), so rcu_read_lock holding time is small, unless we meet many netdevices without addresses. I wonder if its really common... Thanks [PATCH net-next-2.6] ipv4: speedup inet_dump_ifaddr() When handling large number of netdevices, inet_dump_ifaddr() is very slow because it has O(N2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12sysctl net: Remove unused binary sysctl codeEric W. Biederman
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05net: net/ipv4/devinet.c cleanupsEric Dumazet
As pointed by Stephen Rothwell, commit c6d14c84 added a warning : net/ipv4/devinet.c: In function 'inet_select_addr': net/ipv4/devinet.c:902: warning: label 'out' defined but not used delete unused 'out' label and do some cleanups as well Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04net: Introduce for_each_netdev_rcu() iteratorEric Dumazet
Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02ipv4: inetdev_by_index() switch to RCUEric Dumazet
Use dev_get_by_index_rcu() instead of __dev_get_by_index() and dev_base_lock rwlock Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ipv4: arp_notify address list bugStephen Hemminger
This fixes a bug with arp_notify. If arp_notify is enabled, kernel will crash if address is changed and no IP address is assigned. http://bugzilla.kernel.org/show_bug.cgi?id=14330 Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24sysctl: remove "struct file *" argument of ->proc_handlerAlexey Dobriyan
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-15bonding: remap muticast addresses without using dev_close() and dev_open()Moni Shoua
This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-19net: Fix devinet_sysctl_forwardEric W. Biederman
sysctls are unregistered with the rntl_lock held making it unsafe to unconditionally grab the the rtnl_lock. Instead we need to call rtnl_trylock and restart the system call if we can not grab it. Otherwise we could deadlock at unregistration time. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netlink: change nlmsg_notify() return value logicPablo Neira Ayuso
This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01net: add ARP notify option for devicesStephen Hemminger
This adds another inet device option to enable gratuitous ARP when device is brought up or address change. This is handy for clusters or virtualization. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/devinet.cJianjun Kong
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: don't use INIT_RCU_HEADAlexey Dobriyan
call_rcu() will unconditionally rewrite RCU head anyway. Applies to struct neigh_parms struct neigh_table struct net struct cipso_v4_doi struct in_ifaddr struct in_device rt->u.dst Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-16net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)Johannes Berg
Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16sysctl: simplify ->strategyAlexey Dobriyan
name and nlen parameters passed to ->strategy hook are unused, remove them. In general ->strategy hook should know what it's doing, and don't do something tricky for which, say, pointer to original userspace array may be needed (name). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ] Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03ipv: Re-enable IP when MTU > 68Breno Leitao
Re-enable IP when the MTU gets back to a valid size. This patch just checks if the in_dev is NULL on a NETDEV_CHANGEMTU event and if MTU is valid (bigger than 68), then re-enable in_dev. Also a function that checks valid MTU size was created. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-06netns: add namespace parameter to rt_cache_flushDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19net: Disable LRO on devices that are forwardingBen Hutchings
Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-12net: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10ipv4 addr: Send netlink notification for address label changesThomas Graf
Makes people happy who try to keep a list of addresses up to date by listening to notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-03route: Remove unused ifa_anycast fieldThomas Graf
The field was supposed to allow the creation of an anycast route by assigning an anycast address to an address prefix. It was never implemented so this field is unused and serves no purpose. Remove it. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-29[NETNS]: Process inet_select_addr inside a namespace.Denis V. Lunev
The context is available from a network device passed in. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Enable IPv4 address manipulations inside namespace.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Process devinet ioctl in the correct namespace.Denis V. Lunev
Add namespace parameter to devinet_ioctl and locate device inside it for state changes. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Enable inetdev_event notifier.Denis V. Lunev
After all these preparations it is time to enable main IPv4 device initialization routine inside namespace. It is safe do this now. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-27[IPV4]: Reset scope when changing addressBjorn Mork
This bug did bite at least one user, who did have to resort to rebooting the system after an "ifconfig eth0 127.0.0.1" typo. Deleting the address and adding a new is a less intrusive workaround. But I still beleive this is a bug that should be fixed. Some way or another. Another possibility would be to remove the scope mangling based on address. This will always be incomplete (are 127/8 the only address space with host scope requirements?) We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured with a loopback address (127/8). The scope is never reset, and will remain set to RT_SCOPE_HOST after changing the address. This patch resets the scope if the address is changed again, to restore normal functionality. Signed-off-by: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01[NETNS]: Process interface address manipulation routines in the namespace.Denis V. Lunev
The namespace is available when required except rtm_to_ifaddr. Add namespace argument to it. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01[IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.Denis V. Lunev
Remove error code assignment inside brackets on failure. The code looks better if the error is assigned before condition check. Also, the compiler treats this better. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01[IPV4]: Make struct ipv4_devconf static.Adrian Bunk
struct ipv4_devconf can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inetdev_by_index.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Process inet_confirm_addr in the correct namespace.Denis V. Lunev
inet_confirm_addr can be called with NULL in_dev from arp_ignore iff scope is RT_SCOPE_LINK. Lets always pass the device and check for RT_SCOPE_LINK scope inside inet_confirm_addr. This let us take network namespace from in_device a need for an additional argument. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Remove extra argument from arp_ignore.Denis V. Lunev
arp_ignore has two arguments: dev & in_dev. dev is used for inet_confirm_addr calling only. inet_confirm_addr, in turn, either gets in_dev from the device passed or iterates over all network devices if the device passed is NULL. It seems logical to directly pass in_dev into inet_confirm_addr. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Should build with CONFIG_SYSCTL=nEric Dumazet
Previous NETNS patches broke CONFIG_SYSCTL=n case Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4] net/ipv4: Use ipv4_is_<type>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet onePavel Emelyanov
These are scattered over the code, but almost all the "critical" places already have the proper struct net at hand except for snmp proc showing function and routing rtnl handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Switch users of ipv4_devconf_dflt to use the pernet onePavel Emelyanov
They are all collected in the net/ipv4/devinet.c file and mostly use the IPV4_DEVCONF_DFLT macro. So I add the net parameter to it and patch users accordingly. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Move the devinet pointers on the struct netPavel Emelyanov
This is the core. Add all and default pointers on the netns_ipv4 and register a new pernet subsys to initialize them. Also add the ctl_table_header to register the net.ipv4.ip_forward ctl. I don't allocate additional memory for init_net, but use global devinets. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Store the net pointer on devinet's ctl tablesPavel Emelyanov
Some handers and strategies of devinet sysctl tables need to know the net to propagate the ctl change to all the net devices. I use the (currently unused) extra2 pointer on the tables to get it. Holding the reference on the struct net is not possible, because otherwise we'll get a net->ctl_table->net circular dependency. But since the ctl tables are unregistered during the net destruction, this is safe to get it w/o additional protection. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>