summaryrefslogtreecommitdiff
path: root/net/ipv6/xfrm6_policy.c
AgeCommit message (Collapse)Author
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put fl6_* macros to struct flowi6 and use them again.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Use flowi4 and flowi6 in xfrm layer.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Make flowi ports AF dependent.David S. Miller
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01xfrm: Handle blackhole route creation via afinfo.David S. Miller
That way we don't have to potentially do this in every xfrm_lookup() caller. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify address arguments to ->dst_lookup()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to ->fill_dst() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to ->get_tos() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27net: Implement read-only protection and COW'ing of metrics.David S. Miller
Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26xfrm6: Don't forget to propagate peer into ipsec route.David S. Miller
Like ipv4, we have to propagate the ipv6 route peer into the ipsec top-level route during instantiation. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11net dst: use a percpu_counter to track entriesEric Dumazet
struct dst_ops tracks number of allocated dst in an atomic_t field, subject to high cache line contention in stress workload. Switch to a percpu_counter, to reduce number of time we need to dirty a central location. Place it on a separate cache line to avoid dirtying read only fields. Stress test : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE, SLUB/NUMA) Before: real 0m51.179s user 0m15.329s sys 10m15.942s After: real 0m45.570s user 0m15.525s sys 9m56.669s With a small reordering of struct neighbour fields, subject of a following patch, (to separate refcnt from other read mostly fields) real 0m41.841s user 0m15.261s sys 8m45.949s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04xfrm: fix xfrm by MARK logicPeter Kosyh
While using xfrm by MARK feature in 2.6.34 - 2.6.35 kernels, the mark is always cleared in flowi structure via memset in _decode_session4 (net/ipv4/xfrm4_policy.c), so the policy lookup fails. IPv6 code is affected by this bug too. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-21xfrm6: ensure to use the same dev when building a bundleNicolas Dichtel
When building a bundle, we set dst.dev and rt6.rt6i_idev. We must ensure to set the same device for both fields. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07xfrm: cache bundles instead of policies for outgoing flowsTimo Teräs
__xfrm_lookup() is called for each packet transmitted out of system. The xfrm_find_bundle() does a linear search which can kill system performance depending on how many bundles are required per policy. This modifies __xfrm_lookup() to store bundles directly in the flow cache. If we did not get a hit, we just create a new bundle instead of doing slow search. This means that we can now get multiple xfrm_dst's for same flow (on per-cpu basis). Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03ipsec: Fix bogus bundle flowiHerbert Xu
When I merged the bundle creation code, I introduced a bogus flowi value in the bundle. Instead of getting from the caller, it was instead set to the flow in the route object, which is totally different. The end result is that the bundles we created never match, and we instead end up with an ever growing bundle list. Thanks to Jamal for find this problem. Reported-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25netns xfrm: deal with dst entries in netnsAlexey Dobriyan
GC is non-existent in netns, so after you hit GC threshold, no new dst entries will be created until someone triggers cleanup in init_net. Make xfrm4_dst_ops and xfrm6_dst_ops per-netns. This is not done in a generic way, because it woule waste (AF_MAX - 2) * sizeof(struct dst_ops) bytes per-netns. Reorder GC threshold initialization so it'd be done before registering XFRM policies. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12sysctl net: Remove unused binary sysctl codeEric W. Biederman
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-08-05xfrm6: Fix xfrm6_policy.c build when SYSCTL disabled.David S. Miller
Same as how Randy Dunlap fixed the ipv4 side of things. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-31xfrm: select sane defaults for xfrm[4|6] gc_threshNeil Horman
Choose saner defaults for xfrm[4|6] gc_thresh values on init Currently, the xfrm[4|6] code has hard-coded initial gc_thresh values (set to 1024). Given that the ipv4 and ipv6 routing caches are sized dynamically at boot time, the static selections can be non-sensical. This patch dynamically selects an appropriate gc threshold based on the corresponding main routing table size, using the assumption that we should in the worst case be able to handle as many connections as the routing table can. For ipv4, the maximum route cache size is 16 * the number of hash buckets in the route cache. Given that xfrm4 starts garbage collection at the gc_thresh and prevents new allocations at 2 * gc_thresh, we set gc_thresh to half the maximum route cache size. For ipv6, its a bit trickier. there is no maximum route cache size, but the ipv6 dst_ops gc_thresh is statically set to 1024. It seems sane to select a simmilar gc_thresh for the xfrm6 code that is half the number of hash buckets in the v6 route cache times 16 (like the v4 code does). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27xfrm: export xfrm garbage collector thresholds via sysctlNeil Horman
Export garbage collector thresholds for xfrm[4|6]_dst_ops Had a problem reported to me recently in which a high volume of ipsec connections on a system began reporting ENOBUFS for new connections eventually. It seemed that after about 2000 connections we started being unable to create more. A quick look revealed that the xfrm code used a dst_ops structure that limited the gc_thresh value to 1024, and always dropped route cache entries after 2x the gc_thresh. It seems the most direct solution is to export the gc_thresh values in the xfrm[4|6] dst_ops as sysctls, like the main routing table does, so that higher volumes of connections can be supported. This patch has been tested and allows the reporter to increase their ipsec connection volume successfully. Reported-by: Joe Nall <joe@nall.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> ipv4/xfrm4_policy.c | 18 ++++++++++++++++++ ipv6/xfrm6_policy.c | 18 ++++++++++++++++++ 2 files changed, 36 insertions(+) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-04xfrm6: fix the proto and ports decode of sctp protocolWei Yongjun
The SCTP pushed the skb above the sctp chunk header, so the check of pskb_may_pull(skb, nh + offset + 1 - skb->data) in _decode_session6() will never return 0 and the ports decode of sctp will always fail. (nh + offset + 1 - skb->data < 0) Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01net: replace uses of __constant_{endian}Harvey Harrison
Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26netns xfrm: ->get_saddr in netnsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26netns xfrm: ->dst_lookup in netnsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26netns xfrm: dst garbage-collecting in netnsAlexey Dobriyan
Pass netns pointer to struct xfrm_policy_afinfo::garbage_collect() [This needs more thoughts on what to do with dst_ops] [Currently stub to init_net] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12net: remove struct dst_entry::entry_sizeAlexey Dobriyan
Unused after kmem_cache_zalloc() conversion. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02xfrm6: handling fragmentNicolas Dichtel
RFC4301 Section 7.1 says: "7.1. Tunnel Mode SAs that Carry Initial and Non-Initial Fragments All implementations MUST support tunnel mode SAs that are configured to pass traffic without regard to port field (or ICMP type/code or Mobility Header type) values. If the SA will carry traffic for specified protocols, the selector set for the SA MUST specify the port fields (or ICMP type/code or Mobility Header type) as ANY. An SA defined in this fashion will carry all traffic including initial and non-initial fragments for the indicated Local/Remote addresses and specified Next Layer protocol(s)." But for IPv6, fragment is treated as a protocol. This change catches protocol transported in fragmented packet. In IPv4, there is no problem. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-14netns: Add network namespace argument to rt6_fill_node() and ↵Brian Haley
ipv6_dev_get_saddr() ipv6_dev_get_saddr() blindly de-references dst_dev to get the network namespace, but some callers might pass NULL. Change callers to pass a namespace pointer instead. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Support Source Address Selection API (RFC5014).YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-05[NETNS][IPV6] route6 - add netns parameter to ip6_route_outputDaniel Lezcano
Add an netns parameter to ip6_route_output. That will allow to access to the right routing table for outgoing traffic. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().YOSHIFUJI Hideaki
Since most users of ipv6_get_saddr() pass non-NULL as dst argument, use ipv6_dev_get_saddr() directly. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-01[NET]: should explicitely initialize atomic_t field in struct dst_opsEric Dumazet
All but one struct dst_ops static initializations miss explicit initialization of entries field. As this field is atomic_t, we should use ATOMIC_INIT(0), and not rely on atomic_t implementation. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS][DST] dst: pass the dst_ops as parameter to the gc functionsDaniel Lezcano
The garbage collection function receive the dst_ops structure as parameter. This is useful for the next incoming patchset because it will need the dst_ops (there will be several instances) and the network namespace pointer (contained in the dst_ops). The protocols which do not take care of the namespaces will not be impacted by this change (expect for the function signature), they do just ignore the parameter. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM] IPv6: Fix dst/routing check at transformation.Masahide NAKAMURA
IPv6 specific thing is wrongly removed from transformation at net-2.6.25. This patch recovers it with current design. o Update "path" of xfrm_dst since IPv6 transformation should care about routing changes. It is required by MIPv6 and off-link destined IPsec. o Rename nfheader_len which is for non-fragment transformation used by MIPv6 to rt6i_nfheader_len as IPv6 name space. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Added xfrm_decode_session_reverse and xfrmX_policy_check_reverseHerbert Xu
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch adds the functions xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get the reverse flow to perform such a lookup. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make xfrm6_init to return an error code.Daniel Lezcano
The xfrm initialization function does not return any error code, so if there is an error, the caller can not be advise of that. This patch checks the return code of the different called functions in order to return a successful or failed initialization. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Multiple namespaces in the all dst_ifdown routines.Denis V. Lunev
Move dst entries to a namespace loopback to catch refcounting leaks. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Merge most of the output pathHerbert Xu
As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Merge common code into xfrm_bundle_createHerbert Xu
Half of the code in xfrm4_bundle_create and xfrm6_bundle_create are common. This patch extracts that logic and puts it into xfrm_bundle_create. The rest of it are then accessed through afinfo. As a result this fixes the problem with inter-family transforms where we treat every xfrm dst in the bundle as if it belongs to the top family. This patch also fixes a long-standing error-path bug where we may free the xfrm states twice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Move flow construction into xfrm_dst_lookupHerbert Xu
This patch moves the flow construction from the callers of xfrm_dst_lookup into that function. It also changes xfrm_dst_lookup so that it takes an xfrm state as its argument instead of explicit addresses. This removes any address-specific logic from the callers of xfrm_dst_lookup which is needed to correctly support inter-family transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Replace x->type->{local,remote}_addr with flagsHerbert Xu
The functions local_addr and remote_addr are more than what they're needed for. The same thing can be done easily with flags on the type object. This patch does that and simplifies the wrapper functions in xfrm6_policy accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Make sure idev is consistent with dev in xfrm_dstHerbert Xu
Previously we took the device from the bottom route and idev from the top route. This is bad because idev may well point to a different device. This patch changes it so that we get the idev from the device directly. It also makes it an error if either dev or idev is NULL. This is consistent with the rest of the routing code which also treats these cases as errors. I've removed the err initialisation in xfrm6_policy.c because it achieves no purpose and hid a bug when an initial version of this patch neglected to set err to -ENODEV (fortunately the IPv4 version warned about it). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Set dst->input to dst_discardHerbert Xu
The input function should never be invoked on IPsec dst objects. This is because we don't apply IPsec on input until after we've made the routing decision. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Only set neighbour on top xfrm dstHerbert Xu
The neighbour field is only used by dst_confirm which only ever happens on the top-most xfrm dst. So it's a waste to duplicate for every other xfrm dst. This patch moves its setting out of the loop so that only the top one gets set. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>