summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)Author
2013-07-16ndisc: bool initializations should use true and falseDaniel Baluta
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12ipv6: only static routes qualify for equal cost multipathingHannes Frederic Sowa
Static routes in this case are non-expiring routes which did not get configured by autoconf or by icmpv6 redirects. To make sure we actually get an ecmp route while searching for the first one in this fib6_node's leafs, also make sure it matches the ecmp route assumptions. v2: a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF already ensures that this route, even if added again without RTF_EXPIRES (in case of a RA announcement with infinite timeout), does not cause the rt6i_nsiblings logic to go wrong if a later RA updates the expiration time later. v3: a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so, because an pmtu event could update the RTF_EXPIRES flag and we would not count this route, if another route joins this set. We now filter only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that don't get changed after rt6_info construction. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREFHannes Frederic Sowa
This is a follow-up patch to 3630d40067a21d4dfbadc6002bb469ce26ac5d52 ("ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available"). Since the removal of rt->n in rt6_info we can end up with a dst == NULL in rt6_check_neigh. In case the kernel is not compiled with CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown NUD state but we must not avoid doing round robin selection on routes with the same target. So introduce and pass down a boolean ``do_rr'' to indicate when we should update rt->rr_ptr. As soon as no route is valid we do backtracking and do a lookup on a higher level in the fib trie. v2: a) Improved rt6_check_neigh logic (no need to create neighbour there) and documented return values. v3: a) Introduce enum rt6_nud_state to get rid of the magic numbers (thanks to David Miller). b) Update and shorten commit message a bit to actualy reflect the source. Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11ipv6: in case of link failure remove route directly instead of letting it expireHannes Frederic Sowa
We could end up expiring a route which is part of an ecmp route set. Doing so would invalidate the rt->rt6i_nsiblings calculations and could provoke the following panic: [ 80.144667] ------------[ cut here ]------------ [ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733! [ 80.145172] invalid opcode: 0000 [#1] SMP [ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables +snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk [ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118 [ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000 [ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202 [ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480 [ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738 [ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001 [ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680 [ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90 [ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0 [ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 80.145172] Stack: [ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280 [ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa [ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680 [ 80.145172] Call Trace: [ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90 [ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70 [ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40 [ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0 [ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30 [ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140 [ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0 [ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0 [ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40 [ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50 [ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0 [ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20 [ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0 [ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30 [ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0 [ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180 [ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170 [ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10 [ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0 [ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10 [ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b [ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53 [ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP <ffff880118771798> [ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]--- [ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11net: rename ll methods to busy-pollEliezer Tamir
Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11net: rename include/net/ll_poll.h to include/net/busy_poll.hEliezer Tamir
Rename the file and correct all the places where it is included. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04sit: fix tunnel update via netlinkNicolas Dichtel
The device can stand in another netns, hence we need to do the lookup in netns tunnel->net. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04ipv6: rt6_check_neigh should successfully verify neigh if no NUD information ↵Hannes Frederic Sowa
are available After the removal of rt->n we do not create a neighbour entry at route insertion time (rt6_bind_neighbour is gone). As long as no neighbour is created because of "useful traffic" we skip this routing entry because rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and thus returns false. This change was introduced by commit 887c95cc1da53f66a5890fdeab13414613010097 ("ipv6: Complete neighbour entry removal from dst_entry.") To quote RFC4191: "If the host has no information about the router's reachability, then the host assumes the router is reachable." and also: "A host MUST NOT probe a router's reachability in the absence of useful traffic that the host would have sent to the router if it were reachable." So, just assume the router is reachable and let's rt6_probe do the rest. We don't need to create a neighbour on route insertion time. If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support) a neighbour is only valid if its nud_state is NUD_VALID. I did not find any references that we should probe the router on route insertion time via the other RFCs. So skip this route in that case. v2: a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov) Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04net: ipv6: fix wrong ping_v6_sendmsg return valueLorenzo Colitti
ping_v6_sendmsg currently returns 0 on success. It should return the number of bytes written instead. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04net: ipv6: add missing lock in ping_v6_sendmsgLorenzo Colitti
Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_sizeHannes Frederic Sowa
If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6,mcast: always hold idev->lock before mca_lockAmerigo Wang
dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01ipv6: fix ecmp lookup when oif is specifiedNicolas Dichtel
There is no reason to skip ECMP lookup when oif is specified, but this implies to check oif given by user when selecting another route. When the new route does not match oif requirement, we simply keep the initial one. Spotted-by: dingzhi <zhi.ding@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01ipv6: only apply anti-spoofing checks to not-pointopoint tunnelsHannes Frederic Sowa
Because of commit 218774dc341f219bfcf940304a081b121a0e8099 ("ipv6: add anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets for 2002::/16 destinations and sources even when configured to work as a tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing checks if the device is not in pointopoint mode. This was an oversight from me in the above commit, sorry. Thanks to Roman Mamedov for reporting this! Reported-by: Roman Mamedov <rm@romanrm.ru> Cc: David Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29ipv6: resend MLD report if a link-local address completes DADHannes Frederic Sowa
RFC3590/RFC3810 specifies we should resend MLD reports as soon as a valid link-local address is available. We now use the valid_ll_addr_cnt to check if it is necessary to resend a new report. Changes since Flavio Leitner's version: a) adapt for valid_ll_addr_cnt b) resend first reports directly in the path and just arm the timer for mc_qrv-1 resends. Reported-by: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29ipv6: introduce per-interface counter for dad-completed ipv6 addressesHannes Frederic Sowa
To reduce the number of unnecessary router solicitations, MLDv2 and IGMPv3 messages we need to track the number of valid (as in non-optimistic, no-dad-failed and non-tentative) link-local addresses. Therefore, this patch implements a valid_ll_addr_cnt in struct inet6_dev. We now only emit router solicitations if the first link-local address finishes duplicate address detection. The changes for MLDv2 and IGMPv3 are in a follow-up patch. While there, also simplify one if statement(one minor nit I made in one of my previous patches): if (!...) do(); else return; <<into>> if (...) return; do(); Cc: Flavio Leitner <fbl@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Suggested-by: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28sit: add support of x-netnsNicolas Dichtel
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26ipv6: rearm router solicitaion timer when setting new tokenized addressHannes Frederic Sowa
When a new tokenized address gets installed we send out just one router solicition. We should send out `rtr_solicits' in case one router advertisment got lost. So, rearm the timer as we do in addrconf_dad_complete. Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26ipv6: ip6_sk_dst_check() must not assume ipv6 dstEric Dumazet
It's possible to use AF_INET6 sockets and to connect to an IPv4 destination. After this, socket dst cache is a pointer to a rtable, not rt6_info. ip6_sk_dst_check() should check the socket dst cache is IPv6, or else various corruptions/crashes can happen. Dave Jones can reproduce immediate crash with trinity -q -l off -n -c sendmsg -c connect With help from Hannes Frederic Sowa Reported-by: Dave Jones <davej@redhat.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: remove old token ipv6 address as soon as possibleHannes Frederic Sowa
If the tokenized ip address is re-set on an interface we depend on the arrival of a new router advertisment to call addrconf_verify to clean up the old address (which valid_lft is now set to 0). Old addresses can linger around for a longer time if e.g. the source of router advertisments vanishes. So, call addrconf_verify immediately after setting the new tokenized address to get rid of the old tokenized addresses. Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: check return value of ipv6_get_lladdrHannes Frederic Sowa
We should check the return value of ipv6_get_lladdr in inet6_set_iftoken. A possible situation, which could leave ll_addr unassigned is, when the user removed her link-local address but a global scoped address was already set. In this case the interface would still be IF_READY and not dead. In that case the RS source address is some value from the stack. v2: Daniel Borkmann noted a small indent inconstancy; no semantic changes. Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: don't disable interface if last ipv6 address is removedHannes Frederic Sowa
The reason behind this change is that as soon as we delete the last ipv6 address of an interface we also lose the /proc/sys/net/ipv6/conf/<interface> directory. This seems to be a usability problem for me. I don't see any reason why we should shutdown ipv6 on that interface in such cases. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: split duplicate address detection and router solicitation timerHannes Frederic Sowa
This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: Process unicast packet with Router Alert by checking flag in skb.YOSHIFUJI Hideaki / 吉藤英明
Router Alert option is marked in skb. Previously, IP6CB(skb)->ra was set to positive value for such packets. Since commit dd3332bf ("ipv6: Store Router Alert option in IP6CB directly."), IP6SKB_ROUTERALERT is set in IP6CB(skb)->flags, and the value of Router Alert option (in network byte order) is set to IP6CB(skb)->ra for such packets. Multicast forwarding path uses that flag and value, but unicast forwarding path does not use the flag and misuses IP6CB(skb)->ra value. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: add include file to suppress sparse warningsEric Dumazet
commit f88c91ddba95 ("ipv6: statically link register_inet6addr_notifier()" added following sparse warnings : net/ipv6/addrconf_core.c:83:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:89:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:95:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains five fixes for Netfilter/IPVS, they are: * A skb leak fix in fragmentation handling in case that helpers are in place, it occurs since the IPV6 NAT infrastructure, from Phil Oester. * Fix SCTP port mangling in ICMP packets for IPVS, from Julian Anastasov. * Fix event delivery in ctnetlink regarding the new connlabel infrastructure, from Florian Westphal. * Fix mangling in the SIP NAT helper, from Balazs Peter Odor. * Fix crash in ipt_ULOG introduced while adding netnamespace support, from Gao Feng. I'll take care of passing several of these patches to -stable once they hit Linus' tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24ipv6: remove a useless pr_info() in addrconf_gre_config()Cong Wang
This is debug info, should at least be pr_debug(), but given that this code is in upstream for two years, there is no need to keep this debugging printk any more, so just remove it. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20netfilter: nf_conntrack_ipv6: Plug sk_buff leak in fragment handlingPhil Oester
In commit 4cdd3408 ("netfilter: nf_conntrack_ipv6: improve fragmentation handling"), an sk_buff leak was introduced when dealing with reassembled packets by grabbing a reference to the original skb instead of the reassembled skb. At this point, the leak only impacted conntracks with an associated helper. In commit 58a317f1 ("netfilter: ipv6: add IPv6 NAT support"), the bug was expanded to include all reassembled packets with unconfirmed conntracks. Fix this by grabbing a reference to the proper reassembled skb. This closes netfilter bugzilla #823. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-06-20ipv6: don't call addrconf_dst_alloc again when enable loGao feng
If we disable all of the net interfaces, and enable un-lo interface before lo interface, we already allocated the addrconf dst in ipv6_add_addr. So we shouldn't allocate it again when we enable lo interface. Otherwise the message below will be triggered. unregister_netdevice: waiting for sit1 to become free. Usage count = 1 This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20sit: fix an oops when IFLA_IPTUN_PROTO is not setNicolas Dichtel
The use of this attribute has been added in 32b8a8e59c9c (sit: add IPv4 over IPv4 support). It is optional, by default proto is IPPROTO_IPV6. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20ip_tunnel: push generic protocol handling to ip_tunnel module.Pravin B Shelar
Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20ip_tunnels: extend iptunnel_xmit()Pravin B Shelar
Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18ipv6: ndisc: fix ndisc_send_redirect writing to the wrong skbMatthias Schiffer
Since some refactoring in 5f5a011, ndisc_send_redirect called ndisc_fill_redirect_hdr_option on the wrong skb, leading to data corruption or in the worst case a panic when the skb_put failed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: Convert uses of typedef ctl_table to struct ctl_tableJoe Perches
Reduce the uses of this unnecessary typedef. Done via perl script: $ git grep --name-only -w ctl_table net | \ xargs perl -p -i -e '\ sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \ s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge' Reflow the modified lines that now exceed 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: ping_check_bind_addr() etc. can be staticWu Fengguang
net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static? net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static? net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static? net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static? net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static? net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static? net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static? net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static? net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11tcp: add low latency socket poll support.Eliezer Tamir
Adds low latency socket poll support for TCP. In tcp_v[46]_rcv() add a call to sk_mark_ll() to copy the napi_id from the skb to the sk. In tcp_recvmsg(), when there is no data in the socket we busy-poll. This is a good example of how to add busy-poll support to more protocols. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11udp: add low latency socket poll supportEliezer Tamir
Add upport for busy-polling on UDP sockets. In __udp[46]_lib_rcv add a call to sk_mark_ll() to copy the napi_id from the skb into the sk. This is done at the earliest possible moment, right after we identify which socket this skb is for. In __skb_recv_datagram When there is no data and the user tries to read we busy poll. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04ipv6: assign rt6_info to inet6_ifaddr in init_loopbackGao feng
Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: ipv6: Implement /proc/net/icmp6.Lorenzo Colitti
The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net: ipv6: Unify {raw,udp}6_sock_seq_show.Lorenzo Colitti
udp6_sock_seq_show and raw6_sock_seq_show are identical, except the UDP version displays ports and the raw version displays the protocol. Refactor most of the code in these two functions into a new common ip6_dgram_sock_seq_show function, in preparation for using it to display ICMPv6 sockets as well. Also reduce the indentation in parts of include/net/transp_v6.h to improve readability. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-01sit: add IPv4 over IPv4 supportNicolas Dichtel
This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-01udp6: Fix udp fragmentation for tunnel traffic.Pravin B Shelar
udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov <dkravkov@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Tested-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31snmp6: remove IPSTATS_MIB_CSUMERRORSNicolas Dichtel
This stat is not relevant in IPv6, there is no checksum in IPv6 header. Just leave a comment to explain the hole. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-29ipv6: Correct comparisons and calculations using skb->tail and ↵Simon Horman
skb-transport_header This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-29net: always pass struct netdev_notifier_info to netdevice notifiersCong Wang
commit 351638e7deeed2ec8ce451b53d3 (net: pass info struct via netdevice notifier) breaks booting of my KVM guest, this is due to we still forget to pass struct netdev_notifier_info in several places. This patch completes it. Cc: Jiri Pirko <jiri@resnulli.us> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-16 06:12:23 (GMT)