summaryrefslogtreecommitdiff
path: root/net/mac80211/cfg.c
AgeCommit message (Collapse)Author
2012-12-06Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mwifiex/sta_ioctl.c net/mac80211/scan.c
2012-11-29mac80211: re-organize the rx rate calculation logicSaravana
Currently the logic to fill a struct rate_info with a STA's last RX rate is accessible only in the cfg.c. As the RX rate calculation might be needed elsewhere, split this out into a separate function. Signed-off-by: Saravana <saravanad@posedge.com> [fix various whitespace issues, reword commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support P2P GO powersave configurationJohannes Berg
If the low-level driver wants to support P2P GO powersave configuration, it must set the cfg80211 flags and mac80211 will pass the parameters to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-26mac80211: support VHT rates in TX infoJohannes Berg
To achieve this, limit the number of retries to 31 (instead of 255) and use the three bits that are then free for VHT flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: support drivers reporting VHT RXJohannes Berg
Add support to mac80211 for having drivers report received VHT MCS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: convert to channel definition structJohannes Berg
Convert mac80211 (and where necessary, some drivers a little bit) to the new channel definition struct. This will allow extending mac80211 for VHT, which is currently restricted to channel contexts since there are no drivers using that which makes it easier. As I also don't care about VHT for drivers not using the channel context API, I won't convert the previous API to VHT support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26nl80211/cfg80211: support VHT channel configurationJohannes Berg
Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: pass a channel definition structJohannes Berg
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: remove remain-on-channel channel typeJohannes Berg
As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-21Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-19mac80211: make remain_on_channel() op pass vif paramEliad Peller
Drivers (e.g. wl12xx) might need to know the vif to roc on (mainly in order to configure the rx filters correctly). Add the vif to the op params, and update the current users (iwlwifi) to use the new api. Signed-off-by: Eliad Peller <eliad@wizery.com> [fix hwsim] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: implement set_mcast_rate() callbackAntonio Quartulli
This new callback can be used to tune the rate to be used to send multicast frames. In the current state the multicast rate can be specified on IBSS/MESH joining only. This makes it impossible to select a custom multicast rate when then join command is sent by an external program (e.g. wpa_supplicant) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31mac80211: do not call ieee80211_configure_filter if no interfaces are upFelix Fietkau
Drivers are not expected to handle it before drv_start has been called. It will be called again after an interface has been brought up. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30mac80211: use a counter for remain-on-channel cookieJohannes Berg
Instead of using the pointer which can be re-used fairly quickly due to allocator patterns and then makes debugging difficult, maintain a counter and use its value. Since it's a 64-bit value it can't really wrap, but catch that case anyway since it most likely points to a bug somewhere. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30mac80211: handle TX power per virtual interfaceJohannes Berg
Even before channel contexts/multi-channel, having a single global TX power limit was already problematic, in particular if two managed interfaces connected to two APs with different power constraints. The channel context introduction completely broke this though and in fact I had disabled TX power configuration there for drivers using channel contexts. Change everything to track TX power per interface so that different user settings and different channel maxima are treated correctly. Also continue tracking the global TX power though for compatibility with applications that attempt to configure the wiphy's TX power globally. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30cfg80211: allow per interface TX power settingJohannes Berg
The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26mac80211: add explicit AP/GO driver operationsJohannes Berg
Depending on the driver, a lot of setup may be necessary to start operating as an AP, some of which may fail. Add an explicit AP start driver method to make such failures easier to handle, and add an AP stop driver method for symmetry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26mac80211: move AP teardown code to correct placeJohannes Berg
Since cfg80211 will now call the explicit stop_ap operation when an AP interface goes down, move all teardown code there and remove it from interface handling. The only thing that needs to stay is the code to dev_close() all dependent VLANs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18nl/cfg80211: force scan using an AP vif if requestedAntonio Quartulli
If the user wants to scan using a vif configured as AP, cfg80211 must give him a chance to do it, even if this will disrupt the stations performance due to off-channel scanning. To do so, this patch adds a 'force' flag to the SCAN_TRIGGER command which tells cfg80211 to perform the scanning operation even if the vif is an AP and the beaconing has already started. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: remove some unused codeJohannes Berg
There are a number of unused variables that gcc pointed out (when building with W=1) as well as some conditions that can never be true due to the datatypes used: unsigned values can't be less than zero. Remove this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17{nl,cfg}80211: Peer STA VHT capsMahesh Palivela
To save STAs VHT caps in AP mode Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: track needed RX chains for channel contextsJohannes Berg
On each channel that the device is operating on, it may need to listen using one or more chains depending on the SMPS settings of the interfaces using it. The previous channel context changes completely removed this ability (before, it was available as the SMPS mode). Add per-context tracking of the required static and dynamic RX chains and notify the driver on changes. To achieve this, track the chains and SMPS mode used on each virtual interface and update the channel context whenever this changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: use channel contextsJohannes Berg
Instead of operating on a single channel only, use the new channel context infrastructure in all mac80211 code. This enables drivers that want to use the new channel context infrastructure to use multiple channels, while nothing should change for all the other drivers that don't support it. Right now this disables both TX power settings and spatial multiplexing powersave. Both need to be re-enabled on a channel context basis. Additionally, when channel contexts are used drop the connection when channel switch is received rather than trying to handle it. This will have to be improved later. [With fixes from Eliad and Emmanuel incorporated] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: track whether to use channel contextsJohannes Berg
Depending on the driver, channel contexts may be used or not. If they are used, the driver must have support for hardware scan and remain-on-channel; otherwise the driver must not advertise support for multiple channels. Also prohibit WDS type interfaces when channel contexts are to be used as there's no clear definition of which channel they use. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: change locking around ieee80211_recalc_smpsJohannes Berg
Make the function acquire the necessary mutex itself to simplify the callers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: add key flag for management keysJohannes Berg
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg
Pull in mac80211.git to let the next patch apply without conflicts, also resolving a hwsim conflict. Conflicts: drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: Various small fixes for cfg.c: mpath_set_pinfo()LEO Airwarosu Yoichi Shinoda
Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22mac80211: Fix AP mode regressionSujith Manoharan
Commit mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp changed the return value when the probe response template is not present. Revert to the earlier value of 1 - this fixes AP mode for drivers like ath9k. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support P2P Device abstractionJohannes Berg
After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: avoid using synchronize_rcu in ieee80211_set_probe_respEyal Shapira
This could take a while (100ms+) and may delay sending assoc resp in AP mode with WPS or P2P GO (as setting the probe resp takes place there). We've encountered situations where the delay was big enough to cause connection problems with devices like Galaxy Nexus. Switch to using call_rcu with a free handler. [Arik - rework to use plain buffer and instead of skb] Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31mac80211: use eth_broadcast_addrJohannes Berg
Instead of memset(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31mac80211: fix current vs. operating channel in preq/beaconJohannes Berg
When sending probe requests, e.g. during software scanning, these will go out on the *current* channel, so their IEs need to be built from the current channel. At other times, e.g. for beacons or probe request templates, the IEs will be used on the *operating* channel and using the current channel instead might result in errors. Add the appropriate parameters to respect the difference. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31mac80211: use oper_channel in utils and configJohannes Berg
Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31mac80211: add PS flag to bss_confEliad Peller
Currently, ps mode is indicated per device (rather than per interface), which doesn't make a lot of sense. Moreover, there are subtle bugs caused by the inability to indicate ps change along with other changes (e.g. when the AP deauth us, we'd like to indicate CHANGED_PS | CHANGED_ASSOC, as changing PS before notifying about disassociation will result in null-packets being sent (if IEEE80211_HW_SUPPORTS_DYNAMIC_PS) while the sta is already disconnected.) Keep the current per-device notifications, and add parallel per-vif notifications. In order to keep it simple, the per-device ps and the per-vif ps are orthogonal - the per-vif ps configuration is determined only by the user configuration (enable/disable) and the connection state, and is not affected by other vifs state and (temporary) dynamic_ps/offchannel operations (unlike per-device ps). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-18mac80211: flush stations before stop beaconingEliad Peller
When AP interface is going down, the stations are flushed (in ieee80211_do_stop()) only after the beaconing was stopped. However, drivers might rely on stations being removed before the beaconing was stopped, in order to clean up properly. Fix it by flushing the stations on ap stop. (we already do the same for other interface types, e.g. in ieee80211_set_disassoc()) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17mac80211: fix tx-mgmt cookie value being left uninitializedNicolas Cavallari
commit "mac80211: unify SW/offload remain-on-channel" moved the cookie assignment from ieee80211_mgmt_tx() to ieee80211_start_roc_work(). But the latter is only called where offchannel is needed. If offchannel isn't needed/used, a uninitialized cookie value would be returned to userspace. This patch sets the cookie value when offchannel isn't used. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13Revert "mac80211: refactor virtual monitor code"Johannes Berg
This reverts commit 870d37fc22f3e40f9f23e06c581c8538fc16a2f0. This code doesn't work as cfg80211 will call set_monitor_enabled at the wrong time and it doesn't seem to be possible to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12nl80211: move scan API to wdevJohannes Berg
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12cfg80211: use wireless_dev for interface managementJohannes Berg
In order to be able to create P2P Device wdevs, move the virtual interface management over to wireless_dev structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09cfg80211: use wdev in mgmt-tx/ROC APIsJohannes Berg
The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09mac80211: update BSS info on AC parameters changeJohannes Berg
When the AC parameters change, drivers might rely on getting a bss_info_changed notification with BSS_CHANGED_QOS in addition to the conf_tx call. Always call the function when userspace updates are made (in AP/GO modes) and also set the change flag when updates were made by the AP (in managed mode.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211/mac80211: remove .get_channelMichal Kazior
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29mac80211: refactor virtual monitor codeMichal Kazior
Use cfg80211 the new .set_monitor_enabled instead of tracking it inside mac80211. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2012-06-28mac80211: don't expose ieee80211_add_srates_ie()Johannes Berg
This and ieee80211_add_ext_srates_ie() aren't exported, so can't be used by drivers anyway, but there's also no reason that they should be so make them private to mac80211 and use sdata instead of vif arguments. Acked-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>