summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2012-10-26mac80211: fix SSID copy on IBSS JOINAntonio Quartulli
The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and its length is likely to be less than IEEE80211_MAX_SSID_LEN most of the time. This patch fixes the ssid copy in ieee80211_ibss_join() by using the SSID length to prevent it from reading beyond the string. Cc: stable@vger.kernel.org Signed-off-by: Antonio Quartulli <ordex@autistici.org> [rewrapped commit message, small rewording] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: don't inspect Sequence Control field on control framesJavier Cardona
Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is not present in control frames. We noticed this problem when processing Block Ack Requests. Cc: stable@vger.kernel.org Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Javier Lopez <jlopex@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: Don't drop frames received with mesh ttl == 1Javier Cardona
Prior this fix, those frames were not received, nor forwarded. Fix this to receive and not forward. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: Only process mesh config header on frames that RA_MATCHJavier Cardona
Doing otherwise is wrong, and may wreak havoc on the mpp tables, specially if the frame is encrypted. Cc: stable@vger.kernel.org Reported-by: Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-24mac80211: use blacklist for duplicate IE checkJohannes Berg
Instead of the current whitelist which accepts duplicates only for the quiet and vendor IEs, use a blacklist of all IEs (that we currently parse) that can't be duplicated. This avoids detecting a beacon as corrupt in the future when new IEs are added that can be duplicated. Cc: stable@vger.kernel.org Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: connect with HT20 if HT40 is not permittedJohannes Berg
Some changes to fix issues with HT40 APs in Korea and follow-up changes to allow using HT40 even if the local regulatory database disallows it caused issues with iwlwifi (and could cause issues with other devices); iwlwifi firmware would assert if you tried to connect to an AP that has an invalid configuration (e.g. using HT40- on channel 140.) Fix this, while avoiding the "Korean AP" issue by disabling HT40 and advertising HT20 to the AP when connecting. Cc: stable@vger.kernel.org [3.6] Reported-by: Florian Reitmeir <florian@reitmeir.org> Tested-by: Florian Reitmeir <florian@reitmeir.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-15cfg80211/mac80211: avoid state mishmash on deauthStanislaw Gruszka
Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-15Merge remote-tracking branch 'wireless/master' into mac80211Johannes Berg
2012-10-08mac80211: use ieee80211_free_txskb to fix possible skb leaksFelix Fietkau
A few places free skbs using dev_kfree_skb even though they're called after ieee80211_subif_start_xmit might have cloned it for tracking tx status. Use ieee80211_free_txskb here to prevent skb leaks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mac80211: call drv_get_tsf() in sleepable contextThomas Pedersen
The call to drv_get/set_tsf() was put on the workqueue to perform tsf adjustments since that function might sleep. However it ended up inside a spinlock, whose critical section must be atomic. Do tsf adjustment outside the spinlock instead, and get rid of a warning. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-01mac80211: Fix FC masking in BIP AAD generationJouni Malinen
The bits used in the mask were off-by-one and ended up masking PwrMgt, MoreData, Protected fields instead of Retry, PwrMgt, MoreData. Fix this and to mask the correct fields. While doing so, convert the code to mask the full FC using IEEE80211_FCTL_* defines similarly to how CCMP AAD is built. Since BIP is used only with broadcast/multicast management frames, the Retry field is always 0 in these frames. The Protected field is also zero to maintain backwards compatibility. As such, the incorrect mask here does not really cause any problems for valid frames. In theory, an invalid BIP frame with Retry or Protected field set to 1 could be rejected because of BIP validation. However, no such frame should show up with standard compliant implementations, so this does not cause problems in normal BIP use. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA on addBA failureJohannes Berg
There's no reason to send a delBA when the peer refused our addBA, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA when removing stationsJohannes Berg
When a station is removed and we stop the aggregation sessions, it's not useful to send delBA since this is due to us or the station disassociating or dropping the connection in some other way, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA before disassocJohannes Berg
When we disassociate, it's not really useful to send delBA action frames since we're going to send disassoc/deauth anyway, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-20mac80211: fix IBSS auth TX debug messageSylvain Roger Rieunier
In the IBSS auth TX debug message the BSSID and DA address are reversed, fix that. Signed-off-by: Sylvain Roger Rieunier <sylvain.roger.rieunier@gmail.com> [reword commit message and make it fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19mac80211: make reset debugfs depend on CONFIG_PMJohannes Berg
The suspend/resume code depends on CONFIG_PM, so the reset debugfs file can only be made available if that is enabled. Fengguang Wu's zero-day build testing found this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: allow re-open the blocked peer link in meshChun-Yeow Yeoh
Peer link which is blocked using the "iw mesh0 station set <MAC addr> plink_action block" is previously not able to re-open using "iw mesh0 station set <MAC addr> plink_action open". This patch is intended to solve this. If the station plink state remains at OPN_SNT once open, try block and open again should solve this problem. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: change locking around ieee80211_recalc_smpsJohannes Berg
Make the function acquire the necessary mutex itself to simplify the callers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-14mac80211: handle power constraint/country IE betterJohannes Berg
Currently, mac80211 uses the power constraint IE, and reduces the regulatory max TX power by it. This can cause issues if the AP is advertising a large power constraint value matching a high TX power in its country IE, for example in this case: ... Country: US Environment: Indoor/Outdoor ... Channels [157 - 157] @ 30 dBm ... Power constraint: 13 dB ... What happened here is that our local regulatory TX power is 15 dBm, and gets reduced by 13 dB so we end up with only 2 dBm effective TX power, which is way too low. Instead, handle the country IE/power constraint IE combined and restrict our TX power to the max of the regulatory power and the maximum power advertised by the AP, in this case 17 dBm (= 30 dBm - 13 dB). Also print a message when this happens to let the user know and help us debug issues with it. Reported-by: Carl A. Cook <CACook@quantum-equities.com> Tested-by: Carl A. Cook <CACook@quantum-equities.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-11mac80211: remove unneeded CONFIG_PM ifdefJohannes Berg
The functions are only called if CONFIG_PM is set as the callers are under an ifdef, so there's no need to also define no-op functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: validate skb->dev in the tx status pathFelix Fietkau
skb->dev might contain a stale reference to a device that was already deleted, and using it unchecked can lead to invalid pointer accesses. Since this is only used for nl80211 tx, iterate over active interfaces to find a match for skb->dev, and discard the tx status if the device is gone. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: use call_rcu() on sta deletionEliad Peller
mac80211 calls synchronize_rcu() on sta deletion, which increase the roaming time significantly. Convert it into a call_rcu() mechanism, in order to avoid blocking. Since some of the cleanup functions might sleep, schedule from the call_rcu callback a new work that will do the actual cleanup. In order to make sure the cleanup occurs before the interface went down, flush local->workqueue on ieee80211_do_stop(). Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: add key flag for management keysJohannes Berg
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSSAntonio Quartulli
Whenever a host gets an AUTH frame it first allocates a new station and then replies with another AUTH frame. However, if sta allocations fails the host should send a DEAUTH frame instead to tell the other end that something went wrong. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07mac80211: move ieee80211_send_deauth_disassoc outside mlme codeAntonio Quartulli
Move ieee80211_send_deauth_disassoc() to util.c to make it available for the rest of the mac80211 code. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07net/mac80211/scan.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: refactor set_channel_typeMichal Kazior
Split functionality for further reuse. Will prevent code duplication when channel context channel_type merging is introduced. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use synchronize_net() on key destroyingEliad Peller
__ieee80211_key_destroy() calls synchronize_rcu() in order to sync the tx path before destroying the key. However, synching the tx path can be done with synchronize_net() as well, which is usually faster (the timing might be important for roaming scenarios). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: check power constraint IE size when parsingJohannes Berg
The power constraint IE is always a single byte so check the size when parsing instead of later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2012-09-06mac80211: disconnect if channel switch failsJohannes Berg
Disconnect from the AP if channel switching in the driver failed or if the new channel is unavailable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: don't hang on to sched_scan_iesJohannes Berg
There's no need to keep a copy of the scheduled scan IEs after the driver has been told, if it requires a copy it must make one. Therefore, we can move sched_scan_ies into the function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg
Pull in mac80211.git to let the next patch apply without conflicts, also resolving a hwsim conflict. Conflicts: drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: Various small fixes for cfg.c: mpath_set_pinfo()LEO Airwarosu Yoichi Shinoda
Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: don't use kerneldoc for ieee80211_add_rx_radiotap_headerJohannes Berg
Doing so creates warnings, but the function is internal and not part of the 802.11 docbooks, so it from kerneldoc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: clear bssid on auth/assoc failureEliad Peller
ifmgd->bssid wasn't cleared properly in some auth/assoc failure cases, causing mac80211 and the low-level driver to go out of sync. Clear ifmgd->bssid on failure, and notify the driver. Cc: stable@kernel.org # 3.4+ Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: Do not check for valid hw_queues for P2P_DEVICEIlan Peer
A P2P Device interface does not have a netdev, and is not expected to be used for transmitting data, so there is no need to assign hw queues for it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-23Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-08-22mac80211: Fix AP mode regressionSujith Manoharan
Commit mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp changed the return value when the probe response template is not present. Revert to the earlier value of 1 - this fixes AP mode for drivers like ath9k. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22mac80211: fix DS to MBSS address translationThomas Pedersen
The destination address of unicast frames forwarded through a mesh gate was being replaced with the broadcast address. Instead leave the original destination address as the mesh DA. If the nexthop address is not in the mpath table it will be resolved. If that fails, the frame will be forwarded to known mesh gates. Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-20mac80211: clean up ieee80211_subif_start_xmitJohannes Berg
There's no need to carry around a return value that is always NETDEV_TX_OK anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: pass channel to ieee80211_send_probe_reqJohannes Berg
In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: convert ops checks to WARN_ONJohannes Berg
There's no need to BUG_ON when a driver registers invalid operations, warn and return an error. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check operating channel in scanJohannes Berg
The optimisation of scanning only on the current channel should check the operating channel. Also modify it to compare channel pointer rather than the frequency. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use RX status band instead of current bandJohannes Berg
Even for single-channel devices it is possible that we switch the channel temporarily (e.g. for scanning) but while doing so process a received frame that was still received on the old channel, so checking the current band is racy. Use the band from status instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: don't assume channel is set in tracingJohannes Berg
With the move to multi-channel and away from drv_config(), hw.conf.channel will not always be set, only for devices using the current API instead of the new channel context APIs. Check the channel is set before adding its frequency to the trace data. Also break some overly long lines in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use oper_channel in rate initJohannes Berg
Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v0.10.2 at 2024-10-09 03:00:12 (GMT)