| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
for outstanding qdisc_run calls
On PREEMPT_RT enabled systems the interrupt handler run as threads at prio 50
(by default). If a high priority userspace process tries to shut down a busy
network interface it might spin in a yield loop waiting for the device to
become idle. With the interrupt thread having a lower priority than the
looping process it might never be scheduled and so result in a deadlock on UP
systems.
With Magic SysRq the following backtrace can be produced:
> test_app R running 0 174 168 0x00000000
> [<c02c7070>] (__schedule+0x220/0x3fc) from [<c02c7870>] (preempt_schedule_irq+0x48/0x80)
> [<c02c7870>] (preempt_schedule_irq+0x48/0x80) from [<c0008fa8>] (svc_preempt+0x8/0x20)
> [<c0008fa8>] (svc_preempt+0x8/0x20) from [<c001a984>] (local_bh_enable+0x18/0x88)
> [<c001a984>] (local_bh_enable+0x18/0x88) from [<c025316c>] (dev_deactivate_many+0x220/0x264)
> [<c025316c>] (dev_deactivate_many+0x220/0x264) from [<c023be04>] (__dev_close_many+0x64/0xd4)
> [<c023be04>] (__dev_close_many+0x64/0xd4) from [<c023be9c>] (__dev_close+0x28/0x3c)
> [<c023be9c>] (__dev_close+0x28/0x3c) from [<c023f7f0>] (__dev_change_flags+0x88/0x130)
> [<c023f7f0>] (__dev_change_flags+0x88/0x130) from [<c023f904>] (dev_change_flags+0x10/0x48)
> [<c023f904>] (dev_change_flags+0x10/0x48) from [<c024c140>] (do_setlink+0x370/0x7ec)
> [<c024c140>] (do_setlink+0x370/0x7ec) from [<c024d2f0>] (rtnl_newlink+0x2b4/0x450)
> [<c024d2f0>] (rtnl_newlink+0x2b4/0x450) from [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4)
> [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4) from [<c0256740>] (netlink_rcv_skb+0xac/0xc0)
> [<c0256740>] (netlink_rcv_skb+0xac/0xc0) from [<c024bbd8>] (rtnetlink_rcv+0x18/0x24)
> [<c024bbd8>] (rtnetlink_rcv+0x18/0x24) from [<c02561b8>] (netlink_unicast+0x13c/0x198)
> [<c02561b8>] (netlink_unicast+0x13c/0x198) from [<c025651c>] (netlink_sendmsg+0x264/0x2e0)
> [<c025651c>] (netlink_sendmsg+0x264/0x2e0) from [<c022af98>] (sock_sendmsg+0x78/0x98)
> [<c022af98>] (sock_sendmsg+0x78/0x98) from [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278)
> [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278) from [<c022cf08>] (__sys_sendmsg+0x48/0x78)
> [<c022cf08>] (__sys_sendmsg+0x48/0x78) from [<c0009320>] (ret_fast_syscall+0x0/0x2c)
This patch works around the problem by replacing yield() by msleep(1), giving
the interrupt thread time to finish, similar to other changes contained in the
rt patch set. Using wait_for_completion() instead would probably be a better
solution.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.0-rc3+ #26
-------------------------------------------------------
ip/1104 is trying to acquire lock:
(local_softirq_lock){+.+...}, at: [<ffffffff81056d12>] __local_lock+0x25/0x68
but task is already holding lock:
(sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_INET){+.+...}:
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff813e2781>] lock_sock_nested+0x82/0x92
[<ffffffff81433308>] lock_sock+0x10/0x12
[<ffffffff81433afa>] tcp_close+0x1b/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
-> #0 (local_softirq_lock){+.+...}:
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
*** DEADLOCK ***
1 lock held by ip/1104:
#0: (sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
stack backtrace:
Pid: 1104, comm: ip Not tainted 3.0.0-rc3+ #26
Call Trace:
[<ffffffff81081649>] print_circular_bug+0x1f8/0x209
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c75>] ? get_parent_ip+0x11/0x41
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c8c>] ? get_parent_ip+0x28/0x41
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff81433308>] ? lock_sock+0x10/0x12
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
On RT write_seqcount_begin() disables preemption and device_rename()
allocates memory with GFP_KERNEL and grabs later the sysfs_mutex
mutex. Serialize with a mutex and add use the non preemption disabling
__write_seqcount_begin().
To avoid writer starvation, let the reader grab the mutex and release
it when it detects a writer in progress. This keeps the normal case
(no reader on the fly) fast.
[ tglx: Instead of replacing the seqcount by a mutex, add the mutex ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This code triggers the new WARN in __raise_softirq_irqsoff() though it
actually looks at the softirq pending bit and calls into the softirq
code, but that fits not well with the context related softirq model of
RT. It's correct on mainline though, but going through
local_bh_disable/enable here is not going to hurt badly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
in response to the oops in ip_output.c:ip_send_unicast_reply under high
network load with CONFIG_PREEMPT_RT_FULL=y, reported by Sami Pietikainen
<Sami.Pietikainen@wapice.com>, this patch adds local serialization in
ip_send_unicast_reply.
from ip_output.c:
/*
* Generic function to send a packet as reply to another packet.
* Used to send some TCP resets/acks so far.
*
* Use a fake percpu inet socket to avoid false sharing and contention.
*/
static DEFINE_PER_CPU(struct inet_sock, unicast_sock) = {
...
which was added in commit be9f4a44 in linux-stable. The git log, wich
introduced the PER_CPU unicast_sock, states:
<snip>
commit be9f4a44e7d41cee50ddb5f038fc2391cbbb4046
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Jul 19 07:34:03 2012 +0000
ipv4: tcp: remove per net tcp_sock
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket
per network namespace.
This leads to bad behavior on multiqueue NICS, because many cpus
contend for the socket lock and once socket lock is acquired, extra
false sharing on various socket fields slow down the operations.
To better resist to attacks, we use a percpu socket. Each cpu can
run without contention, using appropriate memory (local node)
<snip>
The per-cpu here thus is assuming exclusivity serializing per cpu - so
the use of get_cpu_ligh introduced in
net-use-cpu-light-in-ip-send-unicast-reply.patch, which droped the
preempt_disable in favor of a migrate_disable is probably wrong as this
only handles the referencial consistency but not the serialization. To
evade a preempt_disable here a local lock would be needed.
Therapie:
* add local lock:
* and re-introduce local serialization:
Tested on x86 with high network load using the testcase from Sami Pietikainen
while : ; do wget -O - ftp://LOCAL_SERVER/empty_file > /dev/null 2>&1; done
Link: http://www.spinics.net/lists/linux-rt-users/msg11007.html
Cc: stable-rt@vger.kernel.org
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Replace it by a local lock. Though that's pretty inefficient :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
1)enqueue_to_backlog() (called from netif_rx) should be
bind to a particluar CPU. This can be achieved by
disabling migration. No need to disable preemption
2)Fixes crash "BUG: scheduling while atomic: ksoftirqd"
in case of RT.
If preemption is disabled, enqueue_to_backog() is called
in atomic context. And if backlog exceeds its count,
kfree_skb() is called. But in RT, kfree_skb() might
gets scheduled out, so it expects non atomic context.
3)When CONFIG_PREEMPT_RT_FULL is not defined,
migrate_enable(), migrate_disable() maps to
preempt_enable() and preempt_disable(), so no
change in functionality in case of non-RT.
-Replace preempt_enable(), preempt_disable() with
migrate_enable(), migrate_disable() respectively
-Replace get_cpu(), put_cpu() with get_cpu_light(),
put_cpu_light() respectively
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Rajan Srivastava <Rajan.Srivastava@freescale.com>
Cc: <rostedt@goodmis.orgn>
Link: http://lkml.kernel.org/r/1337227511-2271-1-git-send-email-Priyanka.Jain@freescale.com
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
for outstanding qdisc_run calls
On PREEMPT_RT enabled systems the interrupt handler run as threads at prio 50
(by default). If a high priority userspace process tries to shut down a busy
network interface it might spin in a yield loop waiting for the device to
become idle. With the interrupt thread having a lower priority than the
looping process it might never be scheduled and so result in a deadlock on UP
systems.
With Magic SysRq the following backtrace can be produced:
> test_app R running 0 174 168 0x00000000
> [<c02c7070>] (__schedule+0x220/0x3fc) from [<c02c7870>] (preempt_schedule_irq+0x48/0x80)
> [<c02c7870>] (preempt_schedule_irq+0x48/0x80) from [<c0008fa8>] (svc_preempt+0x8/0x20)
> [<c0008fa8>] (svc_preempt+0x8/0x20) from [<c001a984>] (local_bh_enable+0x18/0x88)
> [<c001a984>] (local_bh_enable+0x18/0x88) from [<c025316c>] (dev_deactivate_many+0x220/0x264)
> [<c025316c>] (dev_deactivate_many+0x220/0x264) from [<c023be04>] (__dev_close_many+0x64/0xd4)
> [<c023be04>] (__dev_close_many+0x64/0xd4) from [<c023be9c>] (__dev_close+0x28/0x3c)
> [<c023be9c>] (__dev_close+0x28/0x3c) from [<c023f7f0>] (__dev_change_flags+0x88/0x130)
> [<c023f7f0>] (__dev_change_flags+0x88/0x130) from [<c023f904>] (dev_change_flags+0x10/0x48)
> [<c023f904>] (dev_change_flags+0x10/0x48) from [<c024c140>] (do_setlink+0x370/0x7ec)
> [<c024c140>] (do_setlink+0x370/0x7ec) from [<c024d2f0>] (rtnl_newlink+0x2b4/0x450)
> [<c024d2f0>] (rtnl_newlink+0x2b4/0x450) from [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4)
> [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4) from [<c0256740>] (netlink_rcv_skb+0xac/0xc0)
> [<c0256740>] (netlink_rcv_skb+0xac/0xc0) from [<c024bbd8>] (rtnetlink_rcv+0x18/0x24)
> [<c024bbd8>] (rtnetlink_rcv+0x18/0x24) from [<c02561b8>] (netlink_unicast+0x13c/0x198)
> [<c02561b8>] (netlink_unicast+0x13c/0x198) from [<c025651c>] (netlink_sendmsg+0x264/0x2e0)
> [<c025651c>] (netlink_sendmsg+0x264/0x2e0) from [<c022af98>] (sock_sendmsg+0x78/0x98)
> [<c022af98>] (sock_sendmsg+0x78/0x98) from [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278)
> [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278) from [<c022cf08>] (__sys_sendmsg+0x48/0x78)
> [<c022cf08>] (__sys_sendmsg+0x48/0x78) from [<c0009320>] (ret_fast_syscall+0x0/0x2c)
This patch works around the problem by replacing yield() by msleep(1), giving
the interrupt thread time to finish, similar to other changes contained in the
rt patch set. Using wait_for_completion() instead would probably be a better
solution.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.0-rc3+ #26
-------------------------------------------------------
ip/1104 is trying to acquire lock:
(local_softirq_lock){+.+...}, at: [<ffffffff81056d12>] __local_lock+0x25/0x68
but task is already holding lock:
(sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_INET){+.+...}:
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff813e2781>] lock_sock_nested+0x82/0x92
[<ffffffff81433308>] lock_sock+0x10/0x12
[<ffffffff81433afa>] tcp_close+0x1b/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
-> #0 (local_softirq_lock){+.+...}:
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
*** DEADLOCK ***
1 lock held by ip/1104:
#0: (sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
stack backtrace:
Pid: 1104, comm: ip Not tainted 3.0.0-rc3+ #26
Call Trace:
[<ffffffff81081649>] print_circular_bug+0x1f8/0x209
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c75>] ? get_parent_ip+0x11/0x41
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c8c>] ? get_parent_ip+0x28/0x41
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff81433308>] ? lock_sock+0x10/0x12
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
On RT write_seqcount_begin() disables preemption and device_rename()
allocates memory with GFP_KERNEL and grabs later the sysfs_mutex
mutex. Serialize with a mutex and add use the non preemption disabling
__write_seqcount_begin().
To avoid writer starvation, let the reader grab the mutex and release
it when it detects a writer in progress. This keeps the normal case
(no reader on the fly) fast.
[ tglx: Instead of replacing the seqcount by a mutex, add the mutex ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This code triggers the new WARN in __raise_softirq_irqsoff() though it
actually looks at the softirq pending bit and calls into the softirq
code, but that fits not well with the context related softirq model of
RT. It's correct on mainline though, but going through
local_bh_disable/enable here is not going to hurt badly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
in response to the oops in ip_output.c:ip_send_unicast_reply under high
network load with CONFIG_PREEMPT_RT_FULL=y, reported by Sami Pietikainen
<Sami.Pietikainen@wapice.com>, this patch adds local serialization in
ip_send_unicast_reply.
from ip_output.c:
/*
* Generic function to send a packet as reply to another packet.
* Used to send some TCP resets/acks so far.
*
* Use a fake percpu inet socket to avoid false sharing and contention.
*/
static DEFINE_PER_CPU(struct inet_sock, unicast_sock) = {
...
which was added in commit be9f4a44 in linux-stable. The git log, wich
introduced the PER_CPU unicast_sock, states:
<snip>
commit be9f4a44e7d41cee50ddb5f038fc2391cbbb4046
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Jul 19 07:34:03 2012 +0000
ipv4: tcp: remove per net tcp_sock
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket
per network namespace.
This leads to bad behavior on multiqueue NICS, because many cpus
contend for the socket lock and once socket lock is acquired, extra
false sharing on various socket fields slow down the operations.
To better resist to attacks, we use a percpu socket. Each cpu can
run without contention, using appropriate memory (local node)
<snip>
The per-cpu here thus is assuming exclusivity serializing per cpu - so
the use of get_cpu_ligh introduced in
net-use-cpu-light-in-ip-send-unicast-reply.patch, which droped the
preempt_disable in favor of a migrate_disable is probably wrong as this
only handles the referencial consistency but not the serialization. To
evade a preempt_disable here a local lock would be needed.
Therapie:
* add local lock:
* and re-introduce local serialization:
Tested on x86 with high network load using the testcase from Sami Pietikainen
while : ; do wget -O - ftp://LOCAL_SERVER/empty_file > /dev/null 2>&1; done
Link: http://www.spinics.net/lists/linux-rt-users/msg11007.html
Cc: stable-rt@vger.kernel.org
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Replace it by a local lock. Though that's pretty inefficient :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
1)enqueue_to_backlog() (called from netif_rx) should be
bind to a particluar CPU. This can be achieved by
disabling migration. No need to disable preemption
2)Fixes crash "BUG: scheduling while atomic: ksoftirqd"
in case of RT.
If preemption is disabled, enqueue_to_backog() is called
in atomic context. And if backlog exceeds its count,
kfree_skb() is called. But in RT, kfree_skb() might
gets scheduled out, so it expects non atomic context.
3)When CONFIG_PREEMPT_RT_FULL is not defined,
migrate_enable(), migrate_disable() maps to
preempt_enable() and preempt_disable(), so no
change in functionality in case of non-RT.
-Replace preempt_enable(), preempt_disable() with
migrate_enable(), migrate_disable() respectively
-Replace get_cpu(), put_cpu() with get_cpu_light(),
put_cpu_light() respectively
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Rajan Srivastava <Rajan.Srivastava@freescale.com>
Cc: <rostedt@goodmis.orgn>
Link: http://lkml.kernel.org/r/1337227511-2271-1-git-send-email-Priyanka.Jain@freescale.com
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
for outstanding qdisc_run calls
On PREEMPT_RT enabled systems the interrupt handler run as threads at prio 50
(by default). If a high priority userspace process tries to shut down a busy
network interface it might spin in a yield loop waiting for the device to
become idle. With the interrupt thread having a lower priority than the
looping process it might never be scheduled and so result in a deadlock on UP
systems.
With Magic SysRq the following backtrace can be produced:
> test_app R running 0 174 168 0x00000000
> [<c02c7070>] (__schedule+0x220/0x3fc) from [<c02c7870>] (preempt_schedule_irq+0x48/0x80)
> [<c02c7870>] (preempt_schedule_irq+0x48/0x80) from [<c0008fa8>] (svc_preempt+0x8/0x20)
> [<c0008fa8>] (svc_preempt+0x8/0x20) from [<c001a984>] (local_bh_enable+0x18/0x88)
> [<c001a984>] (local_bh_enable+0x18/0x88) from [<c025316c>] (dev_deactivate_many+0x220/0x264)
> [<c025316c>] (dev_deactivate_many+0x220/0x264) from [<c023be04>] (__dev_close_many+0x64/0xd4)
> [<c023be04>] (__dev_close_many+0x64/0xd4) from [<c023be9c>] (__dev_close+0x28/0x3c)
> [<c023be9c>] (__dev_close+0x28/0x3c) from [<c023f7f0>] (__dev_change_flags+0x88/0x130)
> [<c023f7f0>] (__dev_change_flags+0x88/0x130) from [<c023f904>] (dev_change_flags+0x10/0x48)
> [<c023f904>] (dev_change_flags+0x10/0x48) from [<c024c140>] (do_setlink+0x370/0x7ec)
> [<c024c140>] (do_setlink+0x370/0x7ec) from [<c024d2f0>] (rtnl_newlink+0x2b4/0x450)
> [<c024d2f0>] (rtnl_newlink+0x2b4/0x450) from [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4)
> [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4) from [<c0256740>] (netlink_rcv_skb+0xac/0xc0)
> [<c0256740>] (netlink_rcv_skb+0xac/0xc0) from [<c024bbd8>] (rtnetlink_rcv+0x18/0x24)
> [<c024bbd8>] (rtnetlink_rcv+0x18/0x24) from [<c02561b8>] (netlink_unicast+0x13c/0x198)
> [<c02561b8>] (netlink_unicast+0x13c/0x198) from [<c025651c>] (netlink_sendmsg+0x264/0x2e0)
> [<c025651c>] (netlink_sendmsg+0x264/0x2e0) from [<c022af98>] (sock_sendmsg+0x78/0x98)
> [<c022af98>] (sock_sendmsg+0x78/0x98) from [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278)
> [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278) from [<c022cf08>] (__sys_sendmsg+0x48/0x78)
> [<c022cf08>] (__sys_sendmsg+0x48/0x78) from [<c0009320>] (ret_fast_syscall+0x0/0x2c)
This patch works around the problem by replacing yield() by msleep(1), giving
the interrupt thread time to finish, similar to other changes contained in the
rt patch set. Using wait_for_completion() instead would probably be a better
solution.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.0-rc3+ #26
-------------------------------------------------------
ip/1104 is trying to acquire lock:
(local_softirq_lock){+.+...}, at: [<ffffffff81056d12>] __local_lock+0x25/0x68
but task is already holding lock:
(sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_INET){+.+...}:
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff813e2781>] lock_sock_nested+0x82/0x92
[<ffffffff81433308>] lock_sock+0x10/0x12
[<ffffffff81433afa>] tcp_close+0x1b/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
-> #0 (local_softirq_lock){+.+...}:
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
*** DEADLOCK ***
1 lock held by ip/1104:
#0: (sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
stack backtrace:
Pid: 1104, comm: ip Not tainted 3.0.0-rc3+ #26
Call Trace:
[<ffffffff81081649>] print_circular_bug+0x1f8/0x209
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c75>] ? get_parent_ip+0x11/0x41
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c8c>] ? get_parent_ip+0x28/0x41
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff81433308>] ? lock_sock+0x10/0x12
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
commit 0a13404dd3bf4ea870e3d96270b5a382edca85c0 upstream.
The unix socket code is using the result of csum_partial to
hash into a lookup table:
unix_hash_fold(csum_partial(sunaddr, len, 0));
csum_partial is only guaranteed to produce something that can be
folded into a checksum, as its prototype explains:
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
The 32bit value should not be used directly.
Depending on the alignment, the ppc64 csum_partial will return
different 32bit partial checksums that will fold into the same
16bit checksum.
This difference causes the following testcase (courtesy of
Gustavo) to sometimes fail:
#include <sys/socket.h>
#include <stdio.h>
int main()
{
int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
int i = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);
struct sockaddr addr;
addr.sa_family = AF_LOCAL;
bind(fd, &addr, 2);
listen(fd, 128);
struct sockaddr_storage ss;
socklen_t sslen = (socklen_t)sizeof(ss);
getsockname(fd, (struct sockaddr*)&ss, &sslen);
fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
perror(NULL);
return 1;
}
printf("OK\n");
return 0;
}
As suggested by davem, fix this by using csum_fold to fold the
partial 32bit checksum into a 16bit checksum before using it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 864a6040f395464003af8dd0d8ca86fed19866d4 upstream.
Avoid leaking data by sending uninitialized memory and setting an
invalid (non-zero) fragment number (the sequence number is ignored
anyway) by setting the seq_ctrl field to zero.
Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics")
Fixes: ce662b44ce22 ("mac80211: send (QoS) Null if no buffered frames")
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit cb664981607a6b5b3d670ad57bbda893b2528d96 upstream.
When a VHT network uses 20 or 40 MHz as per the HT operation
information, the channel center frequency segment 0 field in
the VHT operation information is reserved, so ignore it.
This fixes association with such networks when the AP puts 0
into the field, previously we'd disconnect due to an invalid
channel with the message
wlan0: AP VHT information is invalid, disable VHT
Fixes: f2d9d270c15ae ("mac80211: support VHT association")
Reported-by: Tim Nelson <tim.l.nelson@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 963a1852fbac4f75a2d938fa2e734ef1e6d4c044 upstream.
The MLME code in mac80211 must track whether or not the AP changed
bandwidth, but if there's no change while tracking it shouldn't do
anything, otherwise regulatory updates can make it impossible to
connect to certain APs if the regulatory database doesn't match the
information from the AP. See the precise scenario described in the
code.
This still leaves some possible problems with CSA or if the AP
actually changed bandwidth, but those cases are less common and
won't completely prevent using it.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70881
Reported-and-tested-by: Nate Carlson <kernel@natecarlson.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1d147bfa64293b2723c4fec50922168658e613ba upstream.
There is a race between the TX path and the STA wakeup: while
a station is sleeping, mac80211 buffers frames until it wakes
up, then the frames are transmitted. However, the RX and TX
path are concurrent, so the packet indicating wakeup can be
processed while a packet is being transmitted.
This can lead to a situation where the buffered frames list
is emptied on the one side, while a frame is being added on
the other side, as the station is still seen as sleeping in
the TX path.
As a result, the newly added frame will not be send anytime
soon. It might be sent much later (and out of order) when the
station goes to sleep and wakes up the next time.
Additionally, it can lead to the crash below.
Fix all this by synchronising both paths with a new lock.
Both path are not fastpath since they handle PS situations.
In a later patch we'll remove the extra skb queue locks to
reduce locking overhead.
BUG: unable to handle kernel
NULL pointer dereference at 000000b0
IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
*pde = 00000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
Stack:
e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
Call Trace:
[<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
[<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
[<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
[<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
[<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
[<c149ef70>] dev_hard_start_xmit+0x450/0x950
[<c14b9aa9>] sch_direct_xmit+0xa9/0x250
[<c14b9c9b>] __qdisc_run+0x4b/0x150
[<c149f732>] dev_queue_xmit+0x2c2/0xca0
Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
[reword commit log, use a separate lock]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac upstream.
Improves reliability of wifi connections with WPA, since authentication
frames are prioritized over normal traffic and also typically exempt
from aggregation.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 086293542b991fb88a2e41ae7b4f82ac65a20e1a upstream.
Halve mss table size to make blind cookie guessing more difficult.
This is sad since the tables were already small, but there
is little alternative except perhaps adding more precise mss information
in the tcp timestamp. Timestamps are unfortunately not ubiquitous.
Guessing all possible cookie values still has 8-in 2**32 chance.
Reported-by: Jakob Lell <jakob@jakoblell.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 8c27bd75f04fb9cb70c69c3cfe24f4e6d8e15906 upstream.
We currently accept cookies that were created less than 4 minutes ago
(ie, cookies with counter delta 0-3). Combined with the 8 mss table
values, this yields 32 possible values (out of 2**32) that will be valid.
Reducing the lifetime to < 2 minutes halves the guessing chance while
still providing a large enough period.
While at it, get rid of jiffies value -- they overflow too quickly on
32 bit platforms.
getnstimeofday is used to create a counter that increments every 64s.
perf shows getnstimeofday cost is negible compared to sha_transform;
normal tcp initial sequence number generation uses getnstimeofday, too.
Reported-by: Jakob Lell <jakob@jakoblell.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 12e3594698f6c3ab6ebacc79f2fb2ad2bb5952b5 upstream.
In ipcomp_compress(), sortirq is enabled too early, allowing the
per-cpu scratch buffer to be rewritten by ipcomp_decompress()
(called on the same CPU in softirq context) between populating
the buffer and copying the compressed data to the skb.
v2: as pointed out by Steffen Klassert, if we also move the
local_bh_disable() before reading the per-cpu pointers, we can
get rid of get_cpu()/put_cpu().
v3: removed ipcomp_decompress part (as explained by Herbert Xu,
it cannot be called from process context), get rid of cpu
variable (thanks to Eric Dumazet)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
