Age | Commit message (Collapse) | Author |
|
Signed-off-by: Sachin Saxena <sachin.saxena@freescale.com>
CQ ID : ENGR00253307
Change-Id: If090285cc4fdfe6a09bd62da1697a55404cdbce4
Reviewed-on: http://git.am.freescale.net:8181/1345
Reviewed-by: Gupta Rajan-B15745 <rajan.gupta@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Due to opposition from the kernel netdevs, unstaging the Hw Qdisc as a
standard capability and moving it to ASF instead.
Change-Id: I79592b273eac12650d6dab1662a5901725a9c5a9
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1281
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
If the netdev declares the NETIF_F_HW_ACCEL_MQ (accelerated multiqueue)
capability, tell the watchdog to consider the per-netdev trans_start
field rather than any individual multiqueue's timestamp. That is
justified by the fact that queues only go in and out of congestion
in groups, not individually, as far as the net device is concerned.
Change-Id: I07a6693bf1f0bb1e9396c5e232452223a511ecc1
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1033
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Make use of QMan's builtin locking and serialization capabilities in
order to by-pass the need for Qdisc-based locking.
Of course, this means we're losing Qdisc support entirely.
Change-Id: Ide3a37fc50d47c0bdd81e63168118ac84b0034f8
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1032
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Raw move of the DPAA-Ethernet driver as of SDK-v1.3.1.
Also squashed compile fixes on the 3.8 codebase and a number of newer
commits necessary for a clean compilation.
Squashed commits:
- fmd,dpaa_eth: Reorganize port param structures in wrapper API
- dpaa_eth: Cleanup sysfs interface
- dpaa_eth: Minor sysfs change
- dpaa_eth: Move all sysfs code to a separate file
- dpaa_eth: Port FSL-specific netdev features
Change-Id: I51b65ae719b154f55302016f4e8bd943d8a062cb
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1031
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
|
|
On RT write_seqcount_begin() disables preemption and device_rename()
allocates memory with GFP_KERNEL and grabs later the sysfs_mutex mutex.
Since I don't see a reason why this can't be a mutex, make it one. We
probably don't have that much reads at the same time in the hot path.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
This code triggers the new WARN in __raise_softirq_irqsoff() though it
actually looks at the softirq pending bit and calls into the softirq
code, but that fits not well with the context related softirq model of
RT. It's correct on mainline though, but going through
local_bh_disable/enable here is not going to hurt badly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Replace it by a local lock. Though that's pretty inefficient :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
1)enqueue_to_backlog() (called from netif_rx) should be
bind to a particluar CPU. This can be achieved by
disabling migration. No need to disable preemption
2)Fixes crash "BUG: scheduling while atomic: ksoftirqd"
in case of RT.
If preemption is disabled, enqueue_to_backog() is called
in atomic context. And if backlog exceeds its count,
kfree_skb() is called. But in RT, kfree_skb() might
gets scheduled out, so it expects non atomic context.
3)When CONFIG_PREEMPT_RT_FULL is not defined,
migrate_enable(), migrate_disable() maps to
preempt_enable() and preempt_disable(), so no
change in functionality in case of non-RT.
-Replace preempt_enable(), preempt_disable() with
migrate_enable(), migrate_disable() respectively
-Replace get_cpu(), put_cpu() with get_cpu_light(),
put_cpu_light() respectively
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Rajan Srivastava <Rajan.Srivastava@freescale.com>
Cc: <rostedt@goodmis.orgn>
Link: http://lkml.kernel.org/r/1337227511-2271-1-git-send-email-Priyanka.Jain@freescale.com
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.0-rc3+ #26
-------------------------------------------------------
ip/1104 is trying to acquire lock:
(local_softirq_lock){+.+...}, at: [<ffffffff81056d12>] __local_lock+0x25/0x68
but task is already holding lock:
(sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_INET){+.+...}:
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff813e2781>] lock_sock_nested+0x82/0x92
[<ffffffff81433308>] lock_sock+0x10/0x12
[<ffffffff81433afa>] tcp_close+0x1b/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
-> #0 (local_softirq_lock){+.+...}:
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
*** DEADLOCK ***
1 lock held by ip/1104:
#0: (sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
stack backtrace:
Pid: 1104, comm: ip Not tainted 3.0.0-rc3+ #26
Call Trace:
[<ffffffff81081649>] print_circular_bug+0x1f8/0x209
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c75>] ? get_parent_ip+0x11/0x41
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c8c>] ? get_parent_ip+0x28/0x41
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff81433308>] ? lock_sock+0x10/0x12
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Exporting ip_forward function, used by packet offload
engine to forward packets to Linux IPv4 module.
Signed-off-by: Sachin Saxena <sachin.saxena@freescale.com>
Change-Id: If6b536062042e7ae7ddd1580e46858bba2613d36
Reviewed-on: http://git.am.freescale.net:8181/878
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Passing TCP session information in the ip_ct_tcp_state structure
which is used by packet offload engine for handling offloaded
TCP sessions.
Signed-off-by: Arun Pathak <arun.pathak@freescale.com>
Signed-off-by: Sachin Saxena <sachin.saxena@freescale.com>
Change-Id: I68b7d315971dc6e8d7a40cd7ccdbc71813c10b1e
Reviewed-on: http://git.am.freescale.net:8181/877
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Signed-off-by: Arun Pathak <arun.pathak@freescale.com>
Signed-off-by: Sachin Saxena <sachin.saxena@freescale.com>
Change-Id: I72177eea8206d9014838e0948a3a049a0b59735d
Reviewed-on: http://git.am.freescale.net:8181/876
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Signed-off-by: Sachin Saxena <sachin.saxena@freescale.com>
Change-Id: Ia9cc025e36b67beedad57f7fff5a4846be39ad10
Reviewed-on: http://git.am.freescale.net:8181/875
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Signed-off-by: Rajan Gupta <rajan.gupta@freescale.com>
Change-Id: Id8a6e390e5f69025e47cce60b3de89b5ded8b420
Reviewed-on: http://git.am.freescale.net:8181/874
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Signed-off-by: Arun Pathak <arun.pathak@freescale.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@freescale.com>
Change-Id: I215d7925d97e4de1bd88d5308279c960580af34f
Reviewed-on: http://git.am.freescale.net:8181/873
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Added callback functions for fireawall rules notification
for IPv6 flows.
Signed-off-by: Arun Pathak <arun.pathak@freescale.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@freescale.com>
(cherry picked from commit 39e612e45daed4800e2dbb6824db0ab73537e608)
|
|
Added callback function to send iptables change
notification
Signed-off-by: Arun Pathak <arun.pathak@freescale.com>
|
|
cherry picked and merged from commit 9586eb2dd0a560c9b5729aba64e0f08199632ba5
|
|
Partially reverting commit acb600def2110b1310466c0e485c0d26299898ae, in
that we leave the skb recycling functions around until we rebase our
code onto the new 3.8 kernel base.
1. We'll first move this capability back into our driver.
2. At a later stage, we'll remove this capability in this particular
form from the driver altogether, as we integrate the new net APIs.
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
|
|
Use strlcpy where possible to ensure the string is \0 terminated.
Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN
and custom defines.
Use snprintf instead of sprint.
Remove unnecessary inits of ->fw_version
Remove unnecessary inits of drvinfo struct.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[ Upstream commit 9026c4927254f5bea695cc3ef2e255280e6a3011 ]
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 29cd8ae0e1a39e239a3a7b67da1986add1199fc0 ]
The dcb netlink interface leaks stack memory in various places:
* perm_addr[] buffer is only filled at max with 12 of the 32 bytes but
copied completely,
* no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand,
so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes
for ieee_pfc structs, etc.,
* the same is true for CEE -- no in-kernel driver fills the whole
struct,
Prevent all of the above stack info leaks by properly initializing the
buffers/structures involved.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 84d73cd3fb142bf1298a8c13fd4ca50fd2432372 ]
Initialize the mac address buffer with 0 as the driver specific function
will probably not fill the whole buffer. In fact, all in-kernel drivers
fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible
bytes. Therefore we currently leak 26 bytes of stack memory to userland
via the netlink interface.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c085c49920b2f900ba716b4ca1c1a55ece9872cc ]
The bridging code discloses heap and stack bytes via the RTM_GETMDB
netlink interface and via the notify messages send to group RTNLGRP_MDB
afer a successful add/del.
Fix both cases by initializing all unset members/padding bytes with
memset(0).
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ddf64354af4a702ee0b85d0a285ba74c7278a460 ]
v2:
a) used struct ipv6_addr_props
v3:
a) reverted changes for ipv6_addr_props
v4:
a) do not use __ipv6_addr_needs_scope_id
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3bc1b1add7a8484cc4a261c3e128dbe1528ce01f ]
The frames for which rx_handlers return RX_HANDLER_CONSUMED are no longer
counted as dropped. They are counted as successfully received by
'netif_receive_skb'.
This allows network interface drivers to correctly update their RX-OK and
RX-DRP counters based on the result of 'netif_receive_skb'.
Signed-off-by: Cristian Bercaru <B43982@freescale.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commits 0c1233aba1e948c37f6dc7620cb7c253fcd71ce9 and
a6a8fe950e1b8596bb06f2c89c3a1a4bf2011ba9 ]
When we have a large number of static label mappings that spill across
the netlink message boundary we fail to properly save our state in the
netlink_callback struct which causes us to repeat the same listings.
This patch fixes this problem by saving the state correctly between
calls to the NetLabel static label netlink "dumpit" routines.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aab2b4bf224ef8358d262f95b568b8ad0cecf0a0 ]
We should not update ts_recent and call tcp_rcv_rtt_measure_ts() both
before and after going to step5. That wastes CPU and double-counts the
receiver-side RTT sample.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e8b0ac3e41e3c882222a5522d5df7212438ab51 ]
Setting net.ipv6.conf.<interface>.accept_ra=2 causes the kernel
to accept RAs even when forwarding is enabled. However, enabling
forwarding purges all default routes on the system, breaking
connectivity until the next RA is received. Fix this by not
purging default routes on interfaces that have accept_ra=2.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ece6b0a2b25652d684a7ced4ae680a863af041e0 ]
Dave Jones reported the following bug:
"When fed mangled socket data, rds will trust what userspace gives it,
and tries to allocate enormous amounts of memory larger than what
kmalloc can satisfy."
WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0()
Hardware name: GA-MA78GM-S2H
Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s
Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ #65
Call Trace:
[<ffffffff81044155>] warn_slowpath_common+0x75/0xa0
[<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20
[<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0
[<ffffffff8100a196>] ? native_sched_clock+0x26/0x90
[<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0
[<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff811861f8>] alloc_pages_current+0xb8/0x180
[<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80
[<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0
[<ffffffff81193955>] __kmalloc+0x2f5/0x3a0
[<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0
[<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds]
[<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds]
[<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff81564620>] sock_sendmsg+0xb0/0xe0
[<ffffffff810b2052>] ? get_lock_stats+0x22/0x70
[<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40
[<ffffffff81567f30>] sys_sendto+0x130/0x180
[<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60
[<ffffffff816cd767>] ? sysret_check+0x1b/0x56
[<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0
[<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff816cd742>] system_call_fastpath+0x16/0x1b
---[ end trace eed6ae990d018c8b ]---
Reported-by: Dave Jones <davej@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b82547e33e85fc24d4d172a93c796de1fefa81a ]
The sendmsg() syscall handler for PPPoL2TP doesn't decrease the socket
reference counter after successful transmissions. Any successful
sendmsg() call from userspace will then increase the reference counter
forever, thus preventing the kernel's session and tunnel data from
being freed later on.
The problem only happens when writing directly on L2TP sockets.
PPP sockets attached to L2TP are unaffected as the PPP subsystem
uses pppol2tp_xmit() which symmetrically increase/decrease reference
counters.
This patch adds the missing call to sock_put() before returning from
pppol2tp_sendmsg().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 726bc6b092da4c093eb74d13c07184b18c1af0f1 upstream.
Building sctp may fail with:
In function ‘copy_from_user’,
inlined from ‘sctp_getsockopt_assoc_stats’ at
net/sctp/socket.c:5656:20:
arch/x86/include/asm/uaccess_32.h:211:26: error: call to
‘copy_from_user_overflow’ declared with attribute error: copy_from_user()
buffer size is not provably correct
if built with W=1 due to a missing parameter size validation
before the call to copy_from_user.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a07fdceccf9d9f1b87f781e9a87662182e590d70 upstream.
It's called from both __init and __exit code, so neither
tag is appropriate.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 499218595a2e8296b7492af32fcca141b7b8184a upstream.
Some mlme work structs are not cancelled on disassociation
nor interface deletion, which leads to them running after
the memory has been freed
There is not a clean way to cancel these in the disassociation
logic because they must be canceled outside of the ifmgd->mtx
lock, so just cancel them in mgd_stop logic that tears down
the station.
This fixes the crashes we see in 3.7.9+. The crash stack
trace itself isn't so helpful, but this warning gives
more useful info:
WARNING: at /home/greearb/git/linux-3.7.dev.y/lib/debugobjects.c:261 debug_print_object+0x7c/0x8d()
ODEBUG: free active (active state 0) object type: work_struct hint: ieee80211_sta_monitor_work+0x0/0x14 [mac80211]
Modules linked in: [...]
Pid: 14743, comm: iw Tainted: G C O 3.7.9+ #11
Call Trace:
[<ffffffff81087ef8>] warn_slowpath_common+0x80/0x98
[<ffffffff81087fa4>] warn_slowpath_fmt+0x41/0x43
[<ffffffff812a2608>] debug_print_object+0x7c/0x8d
[<ffffffff812a2bca>] debug_check_no_obj_freed+0x95/0x1c3
[<ffffffff8114cc69>] slab_free_hook+0x70/0x79
[<ffffffff8114ea3e>] kfree+0x62/0xb7
[<ffffffff8149f465>] netdev_release+0x39/0x3e
[<ffffffff8136ad67>] device_release+0x52/0x8a
[<ffffffff812937db>] kobject_release+0x121/0x158
[<ffffffff81293612>] kobject_put+0x4c/0x50
[<ffffffff8148f0d7>] netdev_run_todo+0x25c/0x27e
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9a6b52ee1baa865283a91eb8d443ee91adfca56 upstream.
If the socket is full, we're better off just waiting until it empties,
or until the connection is broken. The reason why we generally don't
want to time out is that the call to xprt->ops->release_xprt() will
trigger a connection reset, which isn't helpful...
Let's make an exception for soft RPC calls, since they have to provide
timeout guarantees.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc630d9f476445927fca599f81182c7f06f79058 upstream.
Rewrite server shutdown to remove the assumption that there are no
longer any threads running (no longer true, for example, when shutting
down the service in one network namespace while it's still running in
others).
Do that by doing what we'd do in normal circumstances: just CLOSE each
socket, then enqueue it.
Since there may not be threads to handle the resulting queued xprts,
also run a simplified version of the svc_recv() loop run by a server to
clean up any closed xprts afterwards.
Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e75bafbff2270993926abcc31358361db74a9bc2 upstream.
svc_age_temp_xprts expires xprts in a two-step process: first it takes
the sv_lock and moves the xprts to expire off their server-wide list
(sv_tempsocks or sv_permsocks) to a local list. Then it drops the
sv_lock and enqueues and puts each one.
I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the
sv_lock and sp_lock are not otherwise nested anywhere (and documentation
at the top of this file claims it's correct to nest these with sp_lock
inside.)
Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 5b36ebd8249f403c7edf7cf68d68e9a0d0f55243 upstream.
In some cases when disconnecting after (or during?) CSA
the queues might not recover, and then the only way to
recover is reloading the module.
Fix this by always unblocking the queue CSA reason when
disconnecting.
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|